| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...voir plus UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. voir moins | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...voir plus UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. voir moins | |
| UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for...voir plus UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. voir moins | |
| SHIKOH™ UV-NS001 | Nippon Gohsei | SHIKOH™ UV-NS001 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring medium adhesion and good initial adhesion. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. | |
| SHIKOH™ UV-3630ID80 | Nippon Gohsei | SHIKOH™ UV-3630ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and...voir plus SHIKOH™ UV-3630ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-3610ID80 | Nippon Gohsei | SHIKOH™ UV-3610ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion and low viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as ...voir plus SHIKOH™ UV-3610ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion and low viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-3640PE80 | Nippon Gohsei | SHIKOH™ UV-3640PE80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in phenoxy ethyl acrylate. Featuring medium adhesion and high viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as we...voir plus SHIKOH™ UV-3640PE80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in phenoxy ethyl acrylate. Featuring medium adhesion and high viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-NS034 | Nippon Gohsei | SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesi...voir plus SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesives, masking tapes, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-NS054 | Nippon Gohsei | SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives,...voir plus SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. voir moins | |
| UV Cure 60-7105 | Epoxies, Etc. | UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. Thi...voir plus UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for products requiring deep section curing. voir moins | |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...voir plus nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. voir moins | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...voir plus UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. voir moins | |
| UV Cure 60-7108 | Epoxies, Etc. | UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...voir plus UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. voir moins | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...voir plus UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. voir moins | |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...voir plus UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. voir moins | |
| UV Cure 60-7155 | Epoxies, Etc. | UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...voir plus UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. voir moins | |
| SHIKOH™ UV-1700B | Nippon Gohsei | SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tape...voir plus SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-3700B | Nippon Gohsei | SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings a...voir plus SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings and primers for plastics and electronics, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...voir plus SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...voir plus SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-3310B | Nippon Gohsei | SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and pri...voir plus SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. voir moins | |
| SHIKOH™ UV-6300B | Nippon Gohsei | SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and ...voir plus SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-7600B | Nippon Gohsei | SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and l...voir plus SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...voir plus SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. voir moins | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...voir plus SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. voir moins | |
| SHIKOH™ UV-7650B | Nippon Gohsei | SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...voir plus SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-7630B | Nippon Gohsei | SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...voir plus SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-2000B | Nippon Gohsei | SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optic...voir plus SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-3520EA | Nippon Gohsei | SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, ad...voir plus SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, adhesive films and labels, and plastic and electronic coatings. voir moins | |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking...voir plus SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-6640B | Nippon Gohsei | SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optica...voir plus SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optical discs, plastics, and electronics, as well as adhesive films and labels. voir moins | |
| SHIKOH™ UV-3210EA | Nippon Gohsei | SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optica...voir plus SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. voir moins | |
| SHIKOH™ UV-7461TE | Nippon Gohsei | SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plasti...voir plus SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. voir moins | |
| SHIKOH™ UV-7640B | Nippon Gohsei | SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, ele...voir plus SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, electronics, and woodworking applications, and adhesive films and labels. voir moins | |
| SHIKOH™ UV-2750B | Nippon Gohsei | SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes...voir plus SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes, screen printing inks, adhesive films and labels, and woodworking applications. voir moins | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...voir plus SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...voir plus SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. voir moins | |
| SHIKOH™ UV-7620EA | Nippon Gohsei | SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs...voir plus SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs, plastics, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. voir moins | |
| SHIKOH™ UV-7000B | Nippon Gohsei | SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and scree...voir plus SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. voir moins | |
| BR-3042 | Bomar, formerly Dymax Oligomers & Coatings | BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-cura...voir plus BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-curable laminating adhesives. BR-3042 enhances adhesion and improves solvent resistance. voir moins | |
| Uvacril R1 | Ichemco | Uvacril R1 is a UV-curable, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of 99-100%. Uvacril R1 is most commonly used in label production applications. | |
| Uvacril R2 | Ichemco | Uvacril R2 is a UV-curable, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99%. Uvacril R2 is most commonly used in removable and deep freeze label production applications. | |
| GENOMER* 6043/M22 | Rahn AG | GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesiv...voir plus GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesives. It shows excellent adhesive properties. This product t is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. voir moins | Request Sample |
| TGIC-G | Changzhou Niutang Chemical Plant | TGIC-G is a white granule with low UV absorption. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| Uvacril M 25 | Ichemco | Uvacril M 25 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 150°C of 20-30 mPa.s. Uvacril M 25 is most commonly used in label, tape, and graphi...voir plus Uvacril M 25 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 150°C of 20-30 mPa.s. Uvacril M 25 is most commonly used in label, tape, and graphic production applications. voir moins | |
| Uvacril M 26 | Ichemco | Uvacril M 26 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 130°C of 35-70 mPa.s. Uvacril M 26 is most commonly used in label, tape, and graphic ...voir plus Uvacril M 26 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 130°C of 35-70 mPa.s. Uvacril M 26 is most commonly used in label, tape, and graphic production applications. voir moins | |
| TGIC-D | Changzhou Niutang Chemical Plant | TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB s...voir plus TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. voir moins | |
| GENOMER* 3143 | Rahn AG | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| GENOCURE* MBF | Rahn AG | GENOCURE* MBF is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* MBF is especially recommended when UV coatings are required to exhibit minimal yellowing. | Request Sample |
| BR-941 | Bomar, formerly Dymax Oligomers & Coatings | BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its exc...voir plus BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers. voir moins | |
| GENORAD* 23 | Rahn AG | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV c...voir plus GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. voir moins | Request Sample |
| GENOMER* 4256 | Rahn AG | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...voir plus GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. voir moins | Request Sample |
| GENOCURE* CPK | Rahn AG | GENOCURE* CPK is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* CPK is especially recommended when UV-coatings are required to exhibit only minimal yellowing even after prolonged exposure to sunlight. | Request Sample |
| GENOMER* 4297 | Rahn AG | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...voir plus GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. voir moins | Request Sample |
| GENOCURE* CQ | Rahn AG | GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental compos...voir plus GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental composites, visible light curing adhesives and pigmented systems. voir moins | Request Sample |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive...voir plus PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. voir moins | |
| GENOCURE* BMS | Rahn AG | GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...voir plus GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. voir moins | Request Sample |
| EPOXY METHACRYLATE 97-053 | Rahn AG | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...voir plus EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. voir moins | Request Sample |
| GENOCURE* EHA | Rahn AG | GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This pr...voir plus GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product can be applied in offset inks and varnishes letterpress inks, screen inks and varnishes, flexo inks and varnishes and industrial coatings and adhesives. voir moins | Request Sample |
| GENOMER* 1125 | Rahn AG | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| GENOCURE* EPD | Rahn AG | GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is ...voir plus GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is typically used in offset inks, letterpress inks, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* DEAP | Rahn AG | GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...voir plus GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. voir moins | Request Sample |
| GENOCURE* MDEA | Rahn AG | GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress...voir plus GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress inks, screen inks and varnishes, paper and board varnishes and wood coatings. voir moins | Request Sample |
| Syna S-06E | DKSH | Syna S-06E is an electronic-grade epoxy. It can be used as a casting resin, in LED encapsulation, insulating materials, 3D printing, carbon fiber cable cores, and other composite materials, giving an outstanding performance for UV resistance and anti-radi...voir plus Syna S-06E is an electronic-grade epoxy. It can be used as a casting resin, in LED encapsulation, insulating materials, 3D printing, carbon fiber cable cores, and other composite materials, giving an outstanding performance for UV resistance and anti-radiation properties. It is UV curable, thermally curable with anhydrides, has high TG up to 195ºC, Excellent yellowing resistance and good UV resistance, outstanding electrical insulation, low halogen and high purity, and low viscosity. voir moins | Request Sample |
| GENOMER* 3486 | Rahn AG | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...voir plus GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. voir moins | Request Sample |
| GENOCURE* PBZ | Rahn AG | GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing...voir plus GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing inks, wood coatings, printed circuit board and photo polymers and printing plates. voir moins | Request Sample |
| GENOCURE* DETX | Rahn AG | GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress ink...voir plus GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. voir moins | Request Sample |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...voir plus ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. voir moins | |
| GENOCURE* EMK | Rahn AG | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...voir plus GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. voir moins | Request Sample |
| GENOCURE* LTM | Rahn AG | GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yel...voir plus GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yellowing wood coatings, non yellowing coatings for plastics, non yellowing screen and decor varnishes, laminating adhesives and pressure sensitive adhesives. voir moins | Request Sample |
| GENOCURE* MBB | Rahn AG | GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...voir plus GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. voir moins | Request Sample |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...voir plus Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. voir moins | |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...voir plus ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. voir moins | |
| GENOCURE* LBP | Rahn AG | GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...voir plus GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. voir moins | Request Sample |
| GENOCURE* ITX | Rahn AG | GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks...voir plus GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. voir moins | Request Sample |
| Novester 8511-73ST | Novaresine S.r.l | Novester 8511-73ST is an elastic unsaturated polyester resin designed primarily for use in wood primers and putties. This product is also recommended for UV-curable and powder coating applications. | |
| GENOCURE* DMHA | Rahn AG | GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, pl...voir plus GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, plastic coatings, water dilutable coatings, clear coatings and pigmented coatings . voir moins | Request Sample |
| GENOMER* 5142 | Rahn AG | GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in th...voir plus GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. voir moins | Request Sample |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...voir plus ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. voir moins | |
| GENOMER* 5161 | Rahn AG | GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...voir plus GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. voir moins | Request Sample |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...voir plus ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. voir moins | |
| GENOCURE* LBC | Rahn AG | GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...voir plus GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. voir moins | Request Sample |
| BR-3741AJ | Bomar, formerly Dymax Oligomers & Coatings | BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adh...voir plus BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs). voir moins | |
| GENOPOL* AB-2 | Rahn AG | GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improve...voir plus GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxanthone and other photoinitiators. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. voir moins | Request Sample |
| SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...voir plus SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. voir moins | |
| SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...voir plus SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. voir moins | |
| GENOCURE* TPO | Rahn AG | GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo in...voir plus GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes and letterpress inks. voir moins | Request Sample |
| GENOCURE* BDK | Rahn AG | GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset in...voir plus GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates. voir moins | Request Sample |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...voir plus Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...voir plus Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...voir plus Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...voir plus Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. voir moins | |
| GENOCURE* BP | Rahn AG | GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent fo...voir plus GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent for photoinitiator cocktails. This product is typically applied in plastic varnishes, printing inks and varnishes and wood and industrial coatings. voir moins | Request Sample |
| GENOCURE* BAPO | Rahn AG | GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due...voir plus GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems. voir moins | Request Sample |
| GENOMER* 4293 | Rahn AG | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
| GENOCURE* PMP | Rahn AG | GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENO...voir plus GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENOCURE* EHA or GENOMER* 5275 (up to 15%). This product is applied in offset inks and varnishes, glass fiber coating, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives, wood coatings and printed circuit boards. voir moins | Request Sample |
| GENOMER* 4383/W | Rahn AG | GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, ...voir plus GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, and good solvent resistance. This product may be cross-linked by used of UV-irradiation with a suitable initiator. GENOMER* 4383/W is recommended for wood and industrial coatings. voir moins | Request Sample |
| GENOMER* 6058 | Rahn AG | GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and v...voir plus GENOMER* 6058 is an organic filler. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 6058 and its dilutions can be used as thixotropy modifiers. This product is recommended for use in the following applications: offset inks and varnishes; wood coatings; screen inks; and plastic coatings. voir moins | Request Sample |
| GENOMER* 6050/TM | Rahn AG | GENOMER* 6050/TM is a modified polyester resin in TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and v...voir plus GENOMER* 6050/TM is a modified polyester resin in TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; industrial coatings; screen inks and varnishes; and letterpress inks. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. voir moins | Request Sample |
| ACMO | Rahn AG | ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...voir plus ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. voir moins | Request Sample |
