| Disvamine-701 | D.S.V. Chemicals Pvt. Ltd. | Disvamine-701 is a butylated amino resin. This product is a melamine formaldehyde resin. It can be used in highly-reactive curing agents for stoving paints, roller coatings, and foil inks. It can also be used in mar-proof varnishes and acid-catalyzed w...voir plus Disvamine-701 is a butylated amino resin. This product is a melamine formaldehyde resin. It can be used in highly-reactive curing agents for stoving paints, roller coatings, and foil inks. It can also be used in mar-proof varnishes and acid-catalyzed wood finishes. voir moins | |
| Disvester-850 | D.S.V. Chemicals Pvt. Ltd. | Disvester-850 is an esterified epoxy resin. This product derives from mixed-length oils. It can be used in automotive primers, chemically resistant coatings, air-drying and stoving paints, and metallic decoration varnishes. | |
| Disvester-890 | D.S.V. Chemicals Pvt. Ltd. | Disvester-890 is a polyester resin. This product has not been created using any oil derivatives. It can be used in high-quality coil coatings and metallic decorative coatings. | |
| Disvester-891 | D.S.V. Chemicals Pvt. Ltd. | Disvester-891 is a polyester resin. This product has not been created with any oil derivatives. It can be used in high-quality coil coatings and metallic decorative coatings. | |
| Disvimol-101 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss i...voir plus Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss inks. voir moins | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvimol-106 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-106 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, ballpoint pen inks, and liquid inks. | |
| Disvipol-201 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-201 is a rosin derivative that has been modified with a phenolic compound. This product is scratchproof and has better solvent release. It can be used in letterpress inks, offset inks, and liquid inks. | |
| Disvipol-205 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-205 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss. It can be used in letterpress inks, offset inks, and gravure printing inks. | |
| Disvipol-207 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-207 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss in the final result. It can be used in web offset and quickset inks. | |
| Disvipol-209 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-209 is a rosin derivative that has been modified with a phenolic compound. This product has good solubility in aliphatic hydrocarbon solvents. It can be used in high quality quickset or sheet-fed inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| Disvipol-271 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels. | |
| DM-1010 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-1010, in the form of a clear anionic liquid, is a medium hard NMP free high performance aliphatic polyether polyurethane dispersion. This product has good coverage and filling characteristics. It can be used in combination with polyurethane or acrylic ...voir plus DM-1010, in the form of a clear anionic liquid, is a medium hard NMP free high performance aliphatic polyether polyurethane dispersion. This product has good coverage and filling characteristics. It can be used in combination with polyurethane or acrylic resins or alone and is appropriate for all types of leather. voir moins | |
| DM-1114 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-1114, in the form of a milky anionic liquid, is a medium soft, inherently dull NMP free high performance aliphatic polyurethane dispersion. It is for use in intermediate coats for leather and leather topcoat applications where good flexibility, embossi...voir plus DM-1114, in the form of a milky anionic liquid, is a medium soft, inherently dull NMP free high performance aliphatic polyurethane dispersion. It is for use in intermediate coats for leather and leather topcoat applications where good flexibility, embossing print retention and abrasion resistance is required. voir moins | |
| DM-831 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applicat...voir plus DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applications where good flexibility, soft hand feel and lower gloss properties are required. voir moins | |
| Docure KH-500F | Kukdo Chemical Co., Ltd. | Docure KH-500F is a Polyamine modified curing agent, which can cure rapidly with epoxy resin at room temperature. KH-500F has been widely applied in the fields of civil engineering, linings, adhesive and coatings. | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...voir plus Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. voir moins | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...voir plus Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. voir moins | |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...voir plus Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. voir moins | |
| Docure TH-438 | Kukdo Chemical Co., Ltd. | Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...voir plus Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. voir moins | |
| Docure TH-451 | Kukdo Chemical Co., Ltd. | Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings. | |
| Docure TH-452 | Kukdo Chemical Co., Ltd. | Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings. | |
| Domemul AA 9269 | HELIOS RESINS | Domemul AA 9269 is a pure acrylic APEO-free emulsion designed for waterborne road marking coatings. The resin can also be used for fast-drying waterborne coatings, including high humidity and low-temperature environments. | |
| Domide G-0240 | Kukdo Chemical Co., Ltd. | Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sea...voir plus Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealants. voir moins | |
| Domide G-0331 | Kukdo Chemical Co., Ltd. | Domide G-0331 is a reactive medium viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for making grouts, moldings, adhesives and sealants. | |
| Domide G-0930 | Kukdo Chemical Co., Ltd. | Domide G-0930 is a reactive Polyamide Resin used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in producing laminates, castings, coatings, concrete repair com...voir plus Domide G-0930 is a reactive Polyamide Resin used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in producing laminates, castings, coatings, concrete repair compounds, adhesives and sealants. voir moins | |
| Domide G-5022 | Kukdo Chemical Co., Ltd. | Domide G-5022 is a reactive polyamide resin which shows excellent adhesion, toughness, water and chemical resistance as a curing agent for epoxy coatings and adhesives. It is particularly designed for use in solvent-based surface coatings. | |
| Domide G-640 | Kukdo Chemical Co., Ltd. | Domide G-640 is a standard high-imidazoline Polyamide Resin and used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in the production of putties, castings, hig...voir plus Domide G-640 is a standard high-imidazoline Polyamide Resin and used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in the production of putties, castings, high solid coatings, concrete repair compounds, adhesives and sealants. voir moins | |
| Domide G-700 | Kukdo Chemical Co., Ltd. | Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based mainten...voir plus Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based maintenance coatings, primers, sealers and coatings for concrete. voir moins | |
| Domide G-A0432 | Kukdo Chemical Co., Ltd. | Domide G-A0432 is a low viscosity Polyamidoamine Resin for reaction with liquid or solid Epoxy Resins. GA0432 is lower in viscosity than G-A0533. This product is well suited for use in sealants, electrical potting and casting. | |
| Domide G-A0533 | Kukdo Chemical Co., Ltd. | Domide G-A0533 is a low-viscosity Polyamidoamine Resin designed for reaction with liquid or solid Epoxy Resins. It can be used as all or part for use in making sealants, electrical potting, casting, coatings and flooring applications. | |
| Domopol 6046 100% | HELIOS RESINS | Domopol 6046 100% is a saturated polyester resin developed for 2K polyurethane coatings. This resin can be used as such or combined with hydroxy acrylic resins to increase solids content in industrial finishes, protective coatings, and plastics coatings. | |
| Domopol 6052 80 BAc | HELIOS RESINS | Domopol 6052 80 BAc is a saturated polyester resin developed for 2K polyurethane coatings as a combination resin for hydroxyl acrylic resins to increase solids content, improve flexibility and outdoor durability in industrial finishes, protective coatings...voir plus Domopol 6052 80 BAc is a saturated polyester resin developed for 2K polyurethane coatings as a combination resin for hydroxyl acrylic resins to increase solids content, improve flexibility and outdoor durability in industrial finishes, protective coatings, and plastics coatings. voir moins | |
| Domopur 0215 35 Wa | HELIOS RESINS | Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scr...voir plus Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scratch resistance. voir moins | |
| DOUBLEMER® 127-100 | DBC Europe GmbH | DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/...voir plus DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 127-100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. voir moins | |
| DOUBLEMER® 127-GP15 | DBC Europe GmbH | DOUBLEMER® 127-GP15 is a standard bisphenol A epoxy diacrylate oligomer with 15% GPTA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV ol...voir plus DOUBLEMER® 127-GP15 is a standard bisphenol A epoxy diacrylate oligomer with 15% GPTA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 127-100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. voir moins | |
| DOUBLEMER® 127-TP20 | DBC Europe GmbH | DOUBLEMER 127-TP20 is a standard bisphenol A epoxy diacrylate oligomer with 20% TPGDA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV ol...voir plus DOUBLEMER 127-TP20 is a standard bisphenol A epoxy diacrylate oligomer with 20% TPGDA as diluent. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. voir moins | |
| DOUBLEMER® 186 | DBC Europe GmbH | DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment...voir plus DOUBLEMER® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be used as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, leveling and adhesion. This product is recommended for use in: clear coatings for paper, overprint varnishes, wood top coat with smooth surface, ink binder with good wetting property and adhesive applications. voir moins | |
| DOUBLEMER® 193A-TF | DBC Europe GmbH | DOUBLEMER® 193A-TF is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. DOUBLEMER® 193A-TF is suitable for offset ink, adhesive for plastics and metals, and photo...voir plus DOUBLEMER® 193A-TF is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. DOUBLEMER® 193A-TF is suitable for offset ink, adhesive for plastics and metals, and photoimageable solder ink. DOUBLEMER® 193A-TF is toluene free. voir moins | |
| DOUBLEMER® 236 | DBC Europe GmbH | DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or elect...voir plus DOUBLEMER® 236 is a polyester acrylate oligomer blended with 40% trimethylolpropane triacrylate (TMPTA) monomer. It imparts good wet lithographic behavior and pigment wetting properties. The films of DOUBLEMER® 236 cured by ultraviolet light (UV) or electron beam (EB) exhibit good adhesion to metals, plastics and papers. Formulated UV/EB curable products containing DOUBLEMER® 236 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommened for use in: wet lithographic inks for paper, plastics and metals; adhesion promoter for coatings on metals, plastics and paper; lithographic overprint varnishes; and post-formable inks. voir moins | |
| DOUBLEMER® 9136 | DBC Europe GmbH | DOUBLEMER® 9136 is a silicone acrylate which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing DOUBLEMER® 9136 will exhibit a smoo...voir plus DOUBLEMER® 9136 is a silicone acrylate which contributes slip, substrate wetting and flow properties when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing DOUBLEMER® 9136 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. voir moins | |
| DT-1169 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical ...voir plus DT-1169, in the form of a whitish liquid, is an acrylic and polyurethane co-polymer. It is a unique dull binder for automotive topcoats that is typically used in combination with polyurethane resins to produce high performance topcoats with good physical properties and good flow. voir moins | |
| DT-1308 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce...voir plus DT-1308 is a high efficiency polyurethane duller with a fine particle size. It is suitable for use in water base automotive leather topcoat formulations to reduce gloss and enhance abrasion resistance. It is used as the primary dulling component to reduce gloss levels to meet OEM specifications. voir moins | |
| Easaqua™ X D 870 | Vencorex | Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....voir plus Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. voir moins | |
| EBECRYL® 575 | Allnex | EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness...voir plus EBECRYL® 575 is a chlorine free polyester resin diluted with EBECRYL® 892. It has been specifically designed to provide good adhesion to plastic substrates. Films of EBECRYL®575 cured by ultraviolet light (UV) or electron beam (EB) result in good hardness. voir moins | Request Sample |
| EBECRYL® 5850 | Allnex | EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch...voir plus EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance. voir moins | Request Sample |
| EBECRYL® 600/35 OT | Allnex | EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exp...voir plus EBECRYL® 600-35 OT is the diacrylate ester of bisphenol A epoxy resin diluted with 35% of oligotriacrylate (OTA 480). This resin is characterized by its low odour, light colour, low irritancy and fast cure response. Films of EBECRYL® 600/35OT cured by exposure to ultraviolet light (UV) and electron beam (EB) exhibit high surface hardness and gloss, low residual odour and the excellent solvent resistance typical of epoxy resins. voir moins | Request Sample |
| EBECRYL® 6100 | Allnex | EBECRYL® 6100 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 6100 is recommended for use in applications where high temperature resistance or high hardness are needed. | Request Sample |
| EBECRYL® 611 | Allnex | EBECRYL® 611 is an epoxy dimethacrylate oligomer without monomers or diluting oligomers. EBECRYL® 611 is recommended for use in applications where high temperature resistance or high hardness is needed. | Request Sample |
| EBECRYL® 716 | Allnex | EBECRYL® 716 is a chlorine-free inert binder diluted with TMPTA. It has been specifically designed to provide good adhesion to non-corona treated rigid plastic substrates. | Request Sample |
| Eco-Rez™ 1621 E | Lawter | Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting prop...voir plus Eco-Rez™ 1621 E is a polyol-modified rosin resin that is free of formaldehyde and phenols. It displays a high solubility and low viscosity in mineral distillates. The product is also fast setting, has a low odor, a high gloss and good pigment wetting properties. It is used in offset, sheet-fed, grinding varnishes and low odor inks. voir moins | |
| Eco-Rez™ 4237 E | Lawter | Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low...voir plus Eco-Rez™ 4237 E is a formaldehyde and phenol-free rosin resin that has low solubility combined with high viscosity in mineral distillates. It is fast setting, has a high melt point, low odor and light color making it ideal for use in OPV varnishes and low odor inks. voir moins | |
| Eco-Rez™ 4440 E | Lawter | Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in off...voir plus Eco-Rez™ 4440 E is a rosin resin that is free of phenols and formaldehyde, with a medium to low viscosity and medium solubility in mineral distillates. It has high gloss, is fast setting with good pigment wetting properties. The product can be used in offset, sheet-fed and low odor inks. voir moins | |
| Eco-Rez™ 9500 E | Lawter | Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmenta...voir plus Eco-Rez™ 9500 E is a high soluble and low viscous rosin resin that has good grinding properties, is free of phenols and formaldehyde and displays low yellowing and odor. The product provides the ability to ensure a greener outcome in terms of environmental sustainability. It is used in grinding varnishes, web offsets and low odor inks. voir moins | |
| Eco-Rez™ 9520 E | Lawter | Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener al...voir plus Eco-Rez™ 9520 E is a rosin resin with a medium solubility and medium viscosity in a vegetable oil. It has low tack, low yellowing and odor, is free of phenols and formaldehyde and has good gel and anti-misting properties. The product provides a greener alternative and can be used in offsets, let down varnishes and low odor inks. voir moins | |
| Eco-Set™ 4002 E | Lawter | Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses ...voir plus Eco-Set™ 4002 E is a grinding varnish with a phenol-free rosin that provides sustainable options in chemistry formulation. It has good tack stability, low tack inks, is fast setting with good lithographic and anti-misting properties. The product has uses in sheet-fed and high speed presses. voir moins | |
| Eco-Set™ 4025 E | Lawter | Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack ...voir plus Eco-Set™ 4025 E is a non-VOC grinding varnish that is free of phenols, offering a renewable source of application in chemistry formulations. It displays good lithographic behavior with good anti-misting properties. It is also fast setting with lower tack inks that are suitable for use in sheet-fed and high speed presses. voir moins | |
| Eco-Set™ 4300 E | Lawter | Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed pre...voir plus Eco-Set™ 4300 E is a gel varnish with phenol-free rosins and mineral distillates that show good tack stability, displays ideal lithographic behavior, is fast setting and has good anti-misting qualities. The product has uses in sheet-fed and high speed presses. voir moins | |
| Eco-Set™ 4330 E | Lawter | Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographi...voir plus Eco-Set™ 4330 E is a gel varnish that is 100% non-VOC and is based on phenol-free rosins which provide a sustainable alternative in chemistry formulations. It shows good tack stability, is fast setting with anti-misting properties and has good lithographic behavior. The product is used in sheet-fed inks and high speed presses. voir moins | |
| Ecoglit Blue 015 HEX | Geotech International B.V. | Ecoglit Blue compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Blue polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous r...voir plus Ecoglit Blue compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Blue polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous reflection. The quality and versatility of Ecoglit Blue allows them to be used on a variety of products. Ecoglit compostable glitter is specifically designed to migrate in a natural environment and as such a sustainable alternative for traditional polyester based glitter. voir moins | |
| Ecoglit Green 015 HEX | Geotech International B.V. | Ecoglit Green compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Green polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous...voir plus Ecoglit Green compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Green polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous reflection. The quality and versatility of Ecoglit Blue allows them to be used on a variety of products. Ecoglit compostable glitter is specifically designed to migrate in a natural environment and as such a sustainable alternative for traditional polyester based glitter. voir moins | |
| Ecoglit Iris Red Green 015 HEX | Geotech International B.V. | Ecoglit Iris Red Green compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on an iridescent polylactic acid (PLA) & Cellulose film which is cut into small particles. It offers h...voir plus Ecoglit Iris Red Green compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on an iridescent polylactic acid (PLA) & Cellulose film which is cut into small particles. It offers high brilliance and fabulous reflection. The quality and versatility of Ecoglit Blue allows them to be used on a variety of products. Ecoglit compostable glitter is specifically designed to migrate in a natural environment and as such a sustainable alternative for traditional polyester based glitter. voir moins | |
| Ecoglit Lavender 015 HEX | Geotech International B.V. | Ecoglit Lavender compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Lavender polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fa...voir plus Ecoglit Lavender compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Lavender polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous reflection. The quality and versatility of Ecoglit Blue allows them to be used on a variety of products. Ecoglit compostable glitter is specifically designed to migrate in a natural environment and as such a sustainable alternative for traditional polyester based glitter. voir moins | |
| Ecoglit Pink 015 HEX | Geotech International B.V. | Ecoglit Pink compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Pink polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous r...voir plus Ecoglit Pink compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Pink polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous reflection. The quality and versatility of Ecoglit Blue allows them to be used on a variety of products. Ecoglit compostable glitter is specifically designed to migrate in a natural environment and as such a sustainable alternative for traditional polyester based glitter. voir moins | |
| Ecoglit Red 015 HEX | Geotech International B.V. | Ecoglit Red compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Red polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous ref...voir plus Ecoglit Red compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Red polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous reflection. The quality and versatility of Ecoglit Blue allows them to be used on a variety of products. Ecoglit compostable glitter is specifically designed to migrate in a natural environment and as such a sustainable alternative for traditional polyester based glitter. voir moins | |
| Ecoglit Yellow Gold 015 HEX | Geotech International B.V. | Ecoglit Yellow Gold compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Gold polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fab...voir plus Ecoglit Yellow Gold compostable glitter are environmental friendly particles for decorative coatings & paints and arts & crafts. The product is based on a Gold polylactic acid (PLA) film which is cut into small particles. It offers high brilliance and fabulous reflection. The quality and versatility of Ecoglit Blue allows them to be used on a variety of products. Ecoglit compostable glitter is specifically designed to migrate in a natural environment and as such a sustainable alternative for traditional polyester based glitter. voir moins | |
| ECOPOL LB-64 | Ecopol Tech | ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repelle...voir plus ECOPOL LB-64 is a monocomponent hybrid organic-inorganic fluorinated polyurethane dispersed in butyl acetate solvent, which undergoes cross-linking in the presence of moisture and drying. This product stands out for its resistance to abrasion, ink repellence, cigarette burns, and stains like coffee, while also exhibiting resistance to steam, high temperatures, and stability against UV radiation. It serves as an excellent hydrophobic and oleophobic coating and it has a high adhesion to inorganic surfaces. ECOPOL LB-64 is particularly recommended as a final coating for materials highly exposed to corrosion or erosion, such as aluminum (and other metals), high-pressure laminates (HPL), wood, and glass, among others. voir moins | Request Sample |
| ECOPOLBUILD 1 | Ecopol Tech | ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...voir plus ECOPOLBUILD 1 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion and alkali resistance. This product contains approximately 85% biobased products. voir moins | Request Sample |
| ECOPOLBUILD 16 | Ecopol Tech | ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once app...voir plus ECOPOLBUILD 16 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polycarbonate-polyurethane, specially designed for protective coatings in the construction and wood industry with excellent hydrolysis and solvent stability. Once applied and cured, the product exhibits water-repellent properties, providing good moisture resistance. Additionally, it imparts excellent abrasion and alkali resistance. This product contains more than 70% biobased products. voir moins | Request Sample |
| ECOPOLBUILD 3 | Ecopol Tech | ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits wate...voir plus ECOPOLBUILD 3 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane, specially designed for protective coating for the construction industry with high hydrolytic stability. Once applied and cured, the product exhibits water repellent properties, thus providing good moisture resistance. It also imparts high abrasion resistance. This product contains approximately 85% biobased products. voir moins | Request Sample |
| ECOPOLCOAT CCR 052-F | Ecopol Tech | ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, wit...voir plus ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. voir moins | Request Sample |
| ECOPOLCOAT CSS 052 | Ecopol Tech | ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, impartin...voir plus ECOPOLCOAT CSS 052 is a unique product in the field of textile coatings as it represents a cationic aqueous organic-inorganic hybrid polyurethane dispersion developed to serve as a top coating. It exhibits superb superhydrophobic characteristics, imparting high water repellency to coated materials. ECOPOLCOAT CSS 052 is environmentally friendly as it is water-based, fluorine-free, and made from 84% natural resources. The dispersion imparts a silky feel to textiles. It is suitable for all types of fabrics, enhancing their performance by improving abrasion resistance. In essence, ECOPOLCOAT CSS 052 emerges as a versatile, high-performance coating solution, combining functionality, aesthetics and ecological principles. voir moins | Request Sample |
| ECOPOLCOAT FF 052 | Ecopol Tech | ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc....voir plus ECOPOLCOAT FF 052 is a cationic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. voir moins | Request Sample |
| ECOPOLCOAT FF 30 | Ecopol Tech | ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particl...voir plus ECOPOLCOAT FF 052 is an anionic aqueous dispersion of organic-inorganic hybrid cross-linked polyurethane. Once cured, it has a high resistance to abrasion, water, alkali, oil, and dirt. It also shows good resistance to weathering (rain, sun, dirt, particles, etc.). It contains CF2 chains in the polyurethane backbone. This CF2 is biodegradable. voir moins | Request Sample |
| ECOPOLCOAT PC 30 | Ecopol Tech | ECOPOLCOAT PC 30 is an anionic aqueous dispersion of bio-based polycarbonate-polyurethane with a solid content of 35%. This coating has a combination of outstanding properties including water resistance, excellent abrasion resistance, and hydrolysis resis...voir plus ECOPOLCOAT PC 30 is an anionic aqueous dispersion of bio-based polycarbonate-polyurethane with a solid content of 35%. This coating has a combination of outstanding properties including water resistance, excellent abrasion resistance, and hydrolysis resistance. Designed for applications in the manufacture of technical and functional textiles, such as sportswear, tents, rainwear, and other products where increased durability and performance are demanded. voir moins | Request Sample |
| ECOPOLEDER-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOP...voir plus ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40%. Specifically designed for impregnation applications it provides adhesive strength, which creates a robust and durable bond to the leather substrate. ECOPOLEDER-BASE imparts an excellent elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand both strength and ease of handling. ECOPOLEDER-BASE represents a solution, which incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. voir moins | Request Sample |
| ECOPOLEDER-BT | Ecopol Tech | ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and ...voir plus ECOPOLEDER-BT is an aqueous anionic polyurethane dispersion with a solids content of 30%. In particular, its cross-linking process is activated during the drying phase, which improves its performance characteristics. Designed for leather impregnation and finishing applications, this dispersion significantly increases the abrasion resistance, conferring durability to the material. It has a high hardness, providing solid protection against wear. ECOPOLEDER-BT has specific binding properties with leather, ensuring strong and durable adhesion. In addition, the dispersion offers alkali resistance, extending its suitability for various conditions. With inherent waterproof properties, it further enhances the durability and utility of leather in various environments. In addition, ECOPOLEDER-BT is environmentally friendly, as more than 40% of its dry composition comes from organic sources. voir moins | Request Sample |
| ECOPOLEDER-D-BASE | Ecopol Tech | ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longe...voir plus ECOPOLEDER-D-BASE is an anionic aqueous polyurethane-polyester dispersion, which stands out for its significant solids content of 50%. Designed with a focus on durability and performance, this dispersion features high hydrolysis resistance, ensuring longevity in applications. Adapted to leather impregnation processes, ECOPOLEDER-D-BASE offers exceptional elasticity, contributing to the flexibility and strength of the material. In particular, ECOPOLEDER-D-BASE exhibits exceptional adhesive strength, creating solid bonds with the leather substrate. This dispersion features advanced polymer technology, offering a high solids solution that elevates leather properties in durability, flexibility and handling. voir moins | Request Sample |
| ECOPOLEDER-PC-TOP | Ecopol Tech | ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective ...voir plus ECOPOLEDER-PC-TOP is an anionic aqueous polycarbonate-polyurethane dispersion of bio-based origin with a solids content of 35%. This coating serves to enhance the strength and durability of leather, providing an additional layer that acts as a protective barrier against scratches, stains and general wear and tear. Its application finds diverse uses, most notably in the manufacture of handbags, belts, footwear and other leather products. voir moins | Request Sample |
| ECOPOLEDER-S-BASE | Ecopol Tech | ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong...voir plus ECOPOLEDER-BASE is an anionic aqueous polyurethane-polyester dispersion with a solids content of 40% adding groups with specific adhesion to leather. It is designed for impregnation applications, providing increased adhesive strength that creates a strong, robust, and more durable bond to the leather substrate. ECOPOLEDER-BASE imparts good elasticity to the material, significantly improving its flexibility. This translates into a superior handling experience, making it the ideal choice for applications that demand strength and ease of handling. ECOPOLEDER-BASE represents a solution that incorporates a synthesis of advanced polyurethane-polyester technology to offer increased performance and versatility in leather impregnation processes. voir moins | Request Sample |
| ECOPOLEDER-S-TOP | Ecopol Tech | ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily...voir plus ECOPOLEDER-S-TOP is a cationic aqueous polyurethane-silicone copolymer dispersion with a solids content of 30%. Its crosslinking mechanism is initiated during the drying process, which significantly increases its performance attributes. Designed primarily for leather finishing applications, this dispersion substantially increases abrasion resistance, contributing to improved material durability. The high hardness of the formulation ensures solid wear protection, complemented by specific binding properties that establish a strong and durable adhesion to the leather. ECOPOLEDER-S-TOP goes beyond conventional functionalities by introducing a silky feel to the leather surface. In addition, it exhibits superhydrophobic properties, reinforcing the leather's resistance in various environmental conditions. In addition, more than 40% of its dry composition comes from bio-based materials. ECOPOLEDER-S-TOP is a sophisticated solution that combines the advantages of polyurethane polymers with silicone in the backbone to improve the performance and feel of leather products. voir moins | Request Sample |
| ECOPOLEDER-TOP | Ecopol Tech | ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailor...voir plus ECOPOLEDER-TOP constitutes an aqueous cationic polyurethane dispersion characterized by a 30% solids content. Significantly, its cross-linking mechanism is activated during the drying phase, culminating in an enhancement of its inherent properties. Tailored for leather finishing applications, this dispersion markedly augments abrasion resistance, thereby conferring a notable degree of durability to the material. The elevated hardness of ECOPOLEDER-TOP ensures robust protection against wear and tear, complemented by specific binding properties that guarantee a resilient and enduring adhesion to the leather substrate. With intrinsic waterproof attributes, it further fortifies the leather's durability and adaptability across diverse environmental conditions. In addition to its functional attributes, ECOPOLEDER-TOP aligns seamlessly with environmental considerations, as more than 40% of its dry composition is derived from organic sources. This renders it a judicious and sustainable choice, harmonizing ecological consciousness with unwavering performance standards. voir moins | Request Sample |
| ECOPOLEDER-TRANS | Ecopol Tech | ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. ...voir plus ECOPOLEDER-TRANS is an anionic aqueous polyurethane-polyester dispersion, which is distinguished by an impressive 60% solids content with a low viscosity. This dispersion is designed to provide a protective coating and improve various leather properties. The high solids content of ECOPOLEDER-TRANS allows for a reduced application rate in transfer processes, optimising coating efficiency. ECOPOLEDER-TRANS provides increased wear resistance, flexibility and durability. voir moins | Request Sample |
| ECOPOLSEC | Ecopol Tech | ECOPOLSEC is a white powder of amorphous precipitated silica with a homogeneous particle size and high absorption capacity. It stands out for its absorption capacity without gel formation. It is specifically used in the sludge drying process. | Request Sample |
| ECOPOLTEXT-D | Ecopol Tech | ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high c...voir plus ECOPOLTEXT-D is an anionic high-molecular weight water-based polyurethane dispersion with high elasticity, high elongation at break, and very good hydrolysis resistance. The dispersion is very stable due to its low particle size distribution with a high concentration of polymer, and very low viscosity. This gives a very good performance for digital printing. The product is free of NMP, NEP, and VOCs and organo-TIN free. Due to its unique polymeric structure, ECOPOLTEXT-D is particularly suitable for applications involving different substrates. As with any product, ECOPOLTEXT-D should be tested or formulated for a specific use before an extensive application. Resin dispersions, emulsifiers, and thickening agents, among others, can be added. voir moins | Request Sample |
| ECOPUD EW-10 | Ecopol Tech | ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to ...voir plus ECOPUD EW-10 is an anionic polyurethane in aqueous dispersion. It can be directly applied to porous materials (wood, paper) using various techniques (brush, roller, spray) without prior drying, with absorption tests recommended. It can also be applied to previously dry surfaces. ECOPUD EW-10 is used in industries such as wood, graphic arts, lamination, footwear, textiles, paper, automotive, and construction. voir moins | Request Sample |
| ECOPUD-42-45 | Ecopol Tech | ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formula...voir plus ECOPUD 42-45 is an anionic dispersion of high-molecular-weight amorphous polyurethane, highly resistant to hydrolysis. It is utilized in the formulation of heat-activated adhesives and for wet bonding. This product serves as a key component in the formulation of adhesives for furniture, automotive, footwear, textiles, leather, cork, and the construction industry. ECOPUD 42-45 is particularly well-suited for wet bonding of textile substrates due to the softness of the polymer film and its resistance to high temperatures. The product is free of NMP, NEP, and VOC’s and organo-TIN free. voir moins | Request Sample |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...voir plus ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. voir moins | Request Sample |
| EE20 | IBA Kimya San. ve Tic. A.S. | EE20 is a thermosetting epoxy-based powder that provides chemical resistance, good flow-out, and high gloss value in decorative and protective coatings. This product is used for interior applications and is suitable for most indoor environments. | |
| EE34 | IBA Kimya San. ve Tic. A.S. | EE34 is a pure epoxy-based thermosetting powder that provides a very low gloss, smooth and hard cured film. This product is abrasion and scratch resistant, and is specially formulated for blackboards, allowing for smoother writing, improved erasability an...voir plus EE34 is a pure epoxy-based thermosetting powder that provides a very low gloss, smooth and hard cured film. This product is abrasion and scratch resistant, and is specially formulated for blackboards, allowing for smoother writing, improved erasability and enhanced visibility. voir moins | |
| Ekosol ES 1000 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synth...voir plus Ekosol ES 1000 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring hard feel, good non-tack properties, and excellent storage stability. This product is ideal for use in base coats for offset printing inks and synthetic leather coatings. voir moins | |
| Ekosol ES 1500T | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 1500T is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and high transparency. This product is ideal for use in direct screen printing ink applications. | |
| Ekosol ES 2500 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applicat...voir plus Ekosol ES 2500 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring dry and slippery feel, compatibility with transfer release paper, and reduced tack. This product is ideal for use in heat transfer printing applications. voir moins | |
| Ekosol ES 2600 | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications...voir plus Ekosol ES 2600 is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel, excellent elongation, and compatibility with transfer release paper. This product is ideal for use in heat transfer printing applications. voir moins | |
| Ekosol ES 3450A | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printi...voir plus Ekosol ES 3450A is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - featuring soft feel and good adhesion to various substrates. This product is ideal for use as an adhesive in heat transfer printing, hot-peel transfer printing, and hot foil stamping applications. voir moins | |
| Ekosol ES 5300W | T&L Co., Ltd. Polymer Technology Centre | Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal f...voir plus Ekosol ES 5300W is an eco-friendly plastisol - free of PVCs, heavy metals, VOCs, and phthalates - in the form of an adhesive ink containing white pigment. Benefits include shorter processing times and no need for an extra adhesive. This product is ideal for use in hot-peel transfer printing and digitally printed white backing applications. voir moins | |
| Epilox® F 16-01 | Leuna-Harze GmbH | Epilox® F 16-01 is a colorless, low-molecular-weight bisphenol F epoxy resin. It has a viscosity at 25 Celsius (Pa·s) of 1.2 - 1.6 and an epoxy equivalent weight of 157 - 167 grams. Epilox® F 16-01 is used in optical adhesives. |
