| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...voir plus DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...voir plus DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...voir plus DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). voir moins | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...voir plus DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. voir moins | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...voir plus DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. voir moins | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...voir plus DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. voir moins | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...voir plus DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. voir moins | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...voir plus DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. voir moins | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...voir plus DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. voir moins | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...voir plus DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). voir moins | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...voir plus DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. voir moins | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...voir plus DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...voir plus DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LithoFill 100 | LITHOS Industrial Minerals GmbH | LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, an...voir plus LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| LithoFill BM | LITHOS Industrial Minerals GmbH | LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...voir plus LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| LithoFill MM | LITHOS Industrial Minerals GmbH | LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...voir plus LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| POLYVEST® 110 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resista...voir plus POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 110 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. voir moins | Request Sample |
| POLYVEST® 130 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resista...voir plus POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 130 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, release agents for polyurethane foams, cell opener for polyurethane foams, defoamers, modifier of resin systems, modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. voir moins | Request Sample |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...voir plus POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. voir moins | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...voir plus POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. voir moins | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...voir plus POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. voir moins | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...voir plus POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics, and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® eCO HT Bio is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber-based sealants and recycled rubber compounds, polymer modification, and many more. voir moins | Request Sample |
| POLYVEST® eCO MA 75 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessibl...voir plus POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO MA 75 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO MA 75 Bio brings the same well-known performance but has reduced carbon emissions. The polar, hydrophobic hydrocarbon resin POLYVEST® eCO MA 75 Bio is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® eCO MA 75 Bio is used in adhesives and sealants compositions, electrical insulations, and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. voir moins | Request Sample |
| POLYVEST® EP MA 100 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible fo...voir plus POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. voir moins | Request Sample |
| POLYVEST® HT | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive ...voir plus POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® HT exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® HT is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber based sealants and recycled rubber compounds, polymer modification, and many more. voir moins | Request Sample |
| POLYVEST® MA 75 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® MA 75 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for va...voir plus POLYVEST® MA 75 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. The polar, hydrophobic hydrocarbon resin POLYVEST® MA 75 is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® MA 75 is used in adhesives and sealants compositions, electrical insulations and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. voir moins | Request Sample |
| SARAWAX SX 105 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic proc...voir plus SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic processing. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. voir moins | Request Sample |
| SARAWAX SX 80 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecu...voir plus SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecular weight distribution. Applications include amongst others Hot melts especially for food packaging. The product is compliant to FDA and EU 10/2011 without specific migration limit. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. voir moins | Request Sample |
| VESTOPLAST® 206 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 206 is a silane modified product with low viscosity and medium softening point. This product is a moisture-curable reactive system and can be purchased either in drums or 10kg Easy Peel Packages. The product can be used as a raw material for v...voir plus VESTOPLAST® 206 is a silane modified product with low viscosity and medium softening point. This product is a moisture-curable reactive system and can be purchased either in drums or 10kg Easy Peel Packages. The product can be used as a raw material for various applications amongst others automotive and window glazing. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® 308 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 308 is a functionalized grade. It is typically applied as a raw material for the production of hot melts for bonding metal and polar substrates. VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion...voir plus VESTOPLAST® 308 is a functionalized grade. It is typically applied as a raw material for the production of hot melts for bonding metal and polar substrates. VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 408 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 408 is a hard grade with excellent thermal stability under load and tear strength. It is typically applied as a raw material for the production of hot melts, e.g. for the textile-, paper- and packaging industry. Generally, VESTOPLAST® amorphou...voir plus VESTOPLAST® 408 is a hard grade with excellent thermal stability under load and tear strength. It is typically applied as a raw material for the production of hot melts, e.g. for the textile-, paper- and packaging industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 508 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 508 is a grade of low viscosity, long open time and low softening point. This product is typically applied as a raw material for the production of hot melts for the hygienic industry and for the production of mattresses. Generally, VESTOPLAST®...voir plus VESTOPLAST® 508 is a grade of low viscosity, long open time and low softening point. This product is typically applied as a raw material for the production of hot melts for the hygienic industry and for the production of mattresses. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 520 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 520 is a product of higher viscosity with a long open time and a low softening point. This product is typically applied as a raw material for cable filling compounds. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the follo...voir plus VESTOPLAST® 520 is a product of higher viscosity with a long open time and a low softening point. This product is typically applied as a raw material for cable filling compounds. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 608 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 608 is a product with a high softening point combined with a relatively low melt viscosity. It is typically applied as a raw material for the production of hot melt adhesives for the paper and packaging industry. Generally, VESTOPLAST® amorpho...voir plus VESTOPLAST® 608 is a product with a high softening point combined with a relatively low melt viscosity. It is typically applied as a raw material for the production of hot melt adhesives for the paper and packaging industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 703 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 703 is a grade of low melt viscosity and short open time. It is applied as a raw material for the production of hot melt adhesives for the packaging- and electrical industry as well as for fiber and filament fixation in carpets. Generally, VES...voir plus VESTOPLAST® 703 is a grade of low melt viscosity and short open time. It is applied as a raw material for the production of hot melt adhesives for the packaging- and electrical industry as well as for fiber and filament fixation in carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 704 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 704 is a soft grade with a relatively short open time. It is applied as a raw material for the production of sprayable hot melt adhesives for the hygienic industry, as well as for labelling and production of sealing compositions. Generally, VE...voir plus VESTOPLAST® 704 is a soft grade with a relatively short open time. It is applied as a raw material for the production of sprayable hot melt adhesives for the hygienic industry, as well as for labelling and production of sealing compositions. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 708 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 708 is a relatively soft product of low melt viscosity and a good thermal stability under load. It is applied as a raw material for the production of hot melt adhesives for the hygienic-, paper- and packaging industry as well as for fiber and ...voir plus VESTOPLAST® 708 is a relatively soft product of low melt viscosity and a good thermal stability under load. It is applied as a raw material for the production of hot melt adhesives for the hygienic-, paper- and packaging industry as well as for fiber and filament fixation in carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 750 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 750 shows a good tear strength and elongation at break combined with a relatively low softening point. This product is applied as a raw material for the production of hot melt adhesives for the hygienic and woodworking industry. Generally, VES...voir plus VESTOPLAST® 750 shows a good tear strength and elongation at break combined with a relatively low softening point. This product is applied as a raw material for the production of hot melt adhesives for the hygienic and woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 751 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: ...voir plus VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® 792 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 792 is a high viscous grade of good tear strength and elongation at break. This product is applied as a raw material for the production of hot melt adhesives for the furniture industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO...voir plus VESTOPLAST® 792 is a high viscous grade of good tear strength and elongation at break. This product is applied as a raw material for the production of hot melt adhesives for the furniture industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 828 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 828 shows a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges, hot melt adhesives fo...voir plus VESTOPLAST® 828 shows a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges, hot melt adhesives for the woodworking industry, heavy coating compounds for carpet tiles and for preshaped-car carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 888 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 888 is a high viscous product with good thermal stability under load and a short open time. This product is typically applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges ...voir plus VESTOPLAST® 888 is a high viscous product with good thermal stability under load and a short open time. This product is typically applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges as well as for hot melt adhesives for the woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 891 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 891 is a high viscosity product with a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bri...voir plus VESTOPLAST® 891 is a high viscosity product with a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges as well as for hot melt adhesives for the woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® EP 807 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 80...voir plus VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 807 the adhesion to e.g. PP can be improved. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® EP V2094 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Lo...voir plus VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Low process temperatures are possible with heat stability still remaining high. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® EP V2103 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, t...voir plus VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, the polymer shows a very short setting time which enables for fast production processes. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® S | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® S is applied as a raw material for the production of polymer modified bitumen for road construction. This product has a melt viscosity at 190 degrees Celsius. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following ben...voir plus VESTOPLAST® S is applied as a raw material for the production of polymer modified bitumen for road construction. This product has a melt viscosity at 190 degrees Celsius. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® SR | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® SR is applied as a raw material for the production of polymer modified bitumen for road construction. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bondin...voir plus VESTOPLAST® SR is applied as a raw material for the production of polymer modified bitumen for road construction. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOWAX® C 20 Flakes/Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. ...voir plus VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® C 60 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a ...voir plus VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® C 60 Prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applicatio...voir plus VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® C40 Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C40 is a Fischer-Tropsch wax oxidate with an acid number of 24-27 mg KOH/g | Request Sample |
| VESTOWAX® EH 100 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-...voir plus VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® FM 1012 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® FM 1012 is a micronised Fischer-Tropsch/PFTE wax. | Request Sample |
| VESTOWAX® H 2050 MG | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® H 2050 MG is a non-functionalised Fischer-Tropsch hard paraffin. | Request Sample |
| VESTOWAX® SH 105 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-P...voir plus VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® SH 105 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Pr...voir plus VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® SH 112 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Proces...voir plus VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
