| Ezolem 6/17 | Braskem S.A. | Ezolem 6/17 is an aliphatic hydrocarbon solvent. | |
| Ezolem 6/7 | Braskem S.A. | Ezolem 6/7 is an aliphatic solvent. | |
| Ezolem 7/9 | Braskem S.A. | Ezolem 7/9 is a light aliphatic solvent. | |
| GARAMITE® 7303 | BYK | GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, ty...voir plus GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7303 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. voir moins | |
| GARAMITE® 7305 | BYK | GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typica...voir plus GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7305 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. It is most suited for medium to high polarity systems. voir moins | |
| HS-100 | Braskem S.A. | HS-100 is an aromatic hydrocarbon solvent. | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LAPONITE B | BYK | LAPONITE B is a synthetic layered fluorosilicate. It is insoluble in water but hydrates and swells to give translucent, colorless colloidal dispersions. At 2 % concentration in water, highly thixotropic gels are obtained. | |
| LAPONITE® RD | BYK | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...voir plus LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. voir moins | |
| LAPONITE® RDS | BYK | LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will r...voir plus LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. voir moins | |
| LAPONITE® S482 | BYK | LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remai...voir plus LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins | |
| LAPONITE® SL25 | BYK | LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On additi...voir plus LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| Mixed Xylene | Braskem S.A. | Mixed Xylene is an aromatic hydrocarbon solvent. | |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...voir plus NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| OPTIBENT® 1056 | BYK | OPTIBENT® 1056 is a high-quality, carefully selected and activated layered silicate product and has been developed for cementitious tile adhesives and base coats (renders). Due to its excellent thixotropic properties, sag resistance and workability proper...voir plus OPTIBENT® 1056 is a high-quality, carefully selected and activated layered silicate product and has been developed for cementitious tile adhesives and base coats (renders). Due to its excellent thixotropic properties, sag resistance and workability properties can be improved. This product is used for dry mix mortars and adhesives voir moins | |
| OPTIBENT® 602 | BYK | OPTIBENT® 602 is a high-quality, activated layered silicate product which creates special properties in mineral binding wall plasters and in hydraulically hardening tile adhesives due to its additional organic modification. | |
| OPTIBENT® 6027 | BYK | OPTIBENT® 6027 is natural untreated phylosilicate suitable to adjust the rheological properties of dry mix mortars, particularly cementitious tile adhesives according to C1-standard and other economic dry mix mortar applications. | |
| OPTIBENT® 6042 | BYK | OPTIBENT® 6042 is a natural occurring rheology modifier based on phyllosilicates providing softer consistency, improved sag control and open time with no negative impact on setting time. OPTIBENT 6042 is effective in mineral based adhesives, particularly ...voir plus OPTIBENT® 6042 is a natural occurring rheology modifier based on phyllosilicates providing softer consistency, improved sag control and open time with no negative impact on setting time. OPTIBENT 6042 is effective in mineral based adhesives, particularly in cementitious, fast setting and mid-set adhesives. OPTIBENT® 6042 is suitable in cementitious construction application allowing a balance of other organic thickeners such as water retention aids. voir moins | |
| OPTIBENT® 987 | BYK | OPTIBENT® 987 is a carefully selected, activated layered silicate product that has been developed for dry pre-mixed mortars and emulsion based systems. It shows a marked thixotropic effect and incorporates a yield value into the system. | |
| OPTIGEL® CK | BYK | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...voir plus OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. voir moins | |
| OPTIGEL® LX | BYK | OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in wat...voir plus OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in water reducible (cosolvent) systems. It can be used alone or in combination with cellulosic materials to improve pigment suspension and to impart dripless application properties. voir moins | |
| OPTIGEL® WA | BYK | OPTIGEL® WA, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. It has a neutral pH-value and is particularly effective in neutral and alkaline systems. This produc...voir plus OPTIGEL® WA, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. It has a neutral pH-value and is particularly effective in neutral and alkaline systems. This product prevents the settling of heavy pigments or fillers, inhibits sagging, and allows the application of thick coatings. voir moins | |
| OPTIGEL® WM | BYK | OPTIGEL® WM is an organically modified bentonite which has been specially developed as a thickening agent for aqueous systems. Due to its high thixotropy, it is particularly suited for improving consistency and stability of emulsion paints. Although the p...voir plus OPTIGEL® WM is an organically modified bentonite which has been specially developed as a thickening agent for aqueous systems. Due to its high thixotropy, it is particularly suited for improving consistency and stability of emulsion paints. Although the powder is slightly tinted, it is easy to incorporate and has no influence on the colour of the pigments added. voir moins | |
| OPTIGEL® WX | BYK | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...voir plus OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. voir moins | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Pluract 10+ | Braskem S.A. | Pluract 10+ is an aromatic hydrocarbon solvent. | |
| Pluract 12+ | Braskem S.A. | Pluract 12+ is a hydrocarbon solvent. | |
| Pluract 9 | Braskem S.A. | Pluract 9 is an aromatic hydrocarbon solvent. | |
| RHEOBYK-411 | BYK | RHEOBYK-411 is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems to improve anti-sagging and anti-settling properties. The additive causes highly thixotropic flow behavior; post-addition is possible. It is recommen...voir plus RHEOBYK-411 is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems to improve anti-sagging and anti-settling properties. The additive causes highly thixotropic flow behavior; post-addition is possible. It is recommended for low-polarity systems. voir moins | |
| RHEOBYK-420 | BYK | RHEOBYK-420 is a liquid rheology additive for aqueous and water-reducible coating systems for improving anti-sagging and anti-settling properties. The additive is also especially suited for manufacturing aqueous pigment concentrates. RHEOBYK-420 causes th...voir plus RHEOBYK-420 is a liquid rheology additive for aqueous and water-reducible coating systems for improving anti-sagging and anti-settling properties. The additive is also especially suited for manufacturing aqueous pigment concentrates. RHEOBYK-420 causes thixotropic flow behavior; post-addition is possible. voir moins | |
| RHEOBYK-425 | BYK | RHEOBYK-425 is a liquid, VOC-free rheology additive for aqueous systems to set the in-can viscosity and to improve the anti-sagging and anti-settling properties. It is suitable for all kinds of aqueous coatings, printing inks, and adhesives in order to im...voir plus RHEOBYK-425 is a liquid, VOC-free rheology additive for aqueous systems to set the in-can viscosity and to improve the anti-sagging and anti-settling properties. It is suitable for all kinds of aqueous coatings, printing inks, and adhesives in order to improve the anti-sagging properties and set the required in-can viscosity of the formulation. The resulting increase in viscosity simultaneously improves the storage stability with reduced settling. When grinding pigment pastes, the additive can also increase the millbase viscosity and therefore improve the dispersion conditions. voir moins | |
| RHEOBYK-430 | BYK | RHEOBYK-430 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. | |
| RHEOBYK-431 | BYK | RHEOBYK-431 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. With the aid of the pigments and fillers, the additive generates a three-dimensional network structure. The...voir plus RHEOBYK-431 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. With the aid of the pigments and fillers, the additive generates a three-dimensional network structure. The entanglement of the high molecular weight polymers is responsible for the development of the pseudoplastic flow behavior. The polarity of the system and the incorporation temperature influence the rheological effectiveness. The settling of the pigments and fillers is prevented and outstanding anti-sagging properties are produced due to the rapid rebound in viscosity after shearing. The additive has no "false body effect", no negative influence on the intercoat adhesion, and it is easy to process on account of its liquid form. voir moins | |
| RHEOBYK-7405 | BYK | RHEOBYK-7405 is an aromatic- and tin-free rheology additive for solvent-free and solvent-borne systems to enhance the rheological properties in conjunction with organophilic phyllosilicates and hydrophilic fumed silica. | |
| RHEOBYK-7410 CA | BYK | RHEOBYK-7410 CA is a liquid rheology additive to produce a highly thixotropic flow behavior for medium-polar solvent-borne and solvent-free systems. | |
| RHEOBYK-7411 CA | BYK | RHEOBYK-7411 CA is a liquid rheology additive for low-polarity solvent-borne and solvent-free systems to produce a highly thixotropic flow behavior and to improve anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 CA | BYK | RHEOBYK-7420 CA is a liquid rheology additive to produce thixotropic flow behavior in aqueous and highly polar systems for improving anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 ET | BYK | RHEOBYK-7420 ET is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | |
| RHEOBYK-7502 | BYK | RHEOBYK-7502 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems. | |
| RHEOBYK-7503 | BYK | RHEOBYK-7503 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems. | |
| RHEOBYK-7591 | BYK | RHEOBYK-7591 is a rheology and processing additive for powder coatings particularly suitable for use in powder coating systems, and in this segment it is broadly compatible with various binders. | |
| RHEOBYK-7610 | BYK | RHEOBYK-7610 is a VOC-, APEO- and tin-free associative thickener for aqueous systems, to generate a highly pseudoplastic flow behavior. | |
| RHEOBYK-H 3300 VF | BYK | RHEOBYK-H 3300 VF is a VOC-free polymer solution used to generate low shear viscosity. It is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. The use of RHEOBYK-H 3300 VF will increase body by ge...voir plus RHEOBYK-H 3300 VF is a VOC-free polymer solution used to generate low shear viscosity. It is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. The use of RHEOBYK-H 3300 VF will increase body by generating low shear viscosity with some impact on high shear viscosity. voir moins | |
| RHEOBYK-H 6500 VF | BYK | RHEOBYK-H 6500 VF is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. It is VOC-free and APEO free. The use of this product will increase low shear rheology, such as Stormer viscosity as well as ...voir plus RHEOBYK-H 6500 VF is an aqueous solution of a hydrophobically modified nonionic polymer commonly called an associative thickener. It is VOC-free and APEO free. The use of this product will increase low shear rheology, such as Stormer viscosity as well as improved sag control and some high shear or ICI viscosity. voir moins | |
| RHEOBYK-H 7500 VF | BYK | RHEOBYK-H 7500 VF is a VOC-free associative thickener (HEUR) for aqueous systems, especially for spray applications, to generate a highly pseudoplastic flow behavior. It significantly increases the viscosity in the low shear range. It reduces sagging and ...voir plus RHEOBYK-H 7500 VF is a VOC-free associative thickener (HEUR) for aqueous systems, especially for spray applications, to generate a highly pseudoplastic flow behavior. It significantly increases the viscosity in the low shear range. It reduces sagging and increases storage stability. The additive is liquid and therefore easy to handle. It is not necessary to adjust the pH value or control the temperature during incorporation. When combined with rheology additives which are effective in the high shear range, such as the RHEOBYK-L/T series, it enables an optimum processability. voir moins | |
| Sensitis 13/15 | Braskem S.A. | Sensitis 13/15 is a hydrocarbon solvent. | |
| Sensitis 17/21 | Braskem S.A. | Sensitis 17/21 is a hydrocarbon solvent. | |
| Sensitis 22/25 | Braskem S.A. | Sensitis 22/25 is a hydrocarbon solvent. | |
| SILZOT® FS-X1 | AlzChem | SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride po...voir plus SILZOT® FS-X1 is an injection moulding feedstock (with 15-20% polymers and sintering additives) for production of sintered silicon nitride ceramics. Due to Alzchem's continuous production process and solely dry processing steps, SILZOT® silicon nitride powders show a very stable and uniform high quality and are manufactured with best environmental practice. voir moins | |
| Silzot® HQ plus (Powder) | AlzChem | Silzot® HQ plus (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Silzot® HQ (Powder) | AlzChem | Silzot® HQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| SILZOT® RTP | AlzChem | SILZOT® RTP is a spray dried granulated silicon nitride powder containing processing and sintering additives. | |
| Silzot® SQ | AlzChem | Silzot® SQ is a fine powder derived from the direct chemical reaction of highly purified silicon and nitrogen. | |
| Silzot® TQ (Powder) | AlzChem | Silzot® TQ (Powder) is a grey powder derived from the direct chemical reaction of silicon and nitrogen. | |
| Tetrâmero | Braskem S.A. | Tetrâmero is used in the formulation of industrial detergents and additives for lubricating oils. | |
| Toluene | Braskem S.A. | Toluene is an aromatic hydrocarbon solvent. | |
| UNILENE® A100 | Braskem S.A. | UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...voir plus UNILENE® A100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| UNILENE® A80 | Braskem S.A. | UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...voir plus UNILENE® A80 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| UNILENE® A90 | Braskem S.A. | UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents a...voir plus UNILENE® A90 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| UNILENE® B100 | Braskem S.A. | UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...voir plus UNILENE® B100 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| UNILENE® B110 | Braskem S.A. | UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...voir plus UNILENE® B110 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| UNILENE® B120 | Braskem S.A. | UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents ...voir plus UNILENE® B120 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| UNILENE® BS130 | Braskem S.A. | UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...voir plus UNILENE® BS130 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| UNILENE® BS140 | Braskem S.A. | UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents...voir plus UNILENE® BS140 is a thermoplastic resin with a low molecular weight obtained through catalytic polymerization of hydrocarbons by continuous process, pastillated in pearls-shaped and presented in soft yellow colored scale. Compatible with the most solvents and polymeric materials. voir moins | |
| White Spirit | Braskem S.A. | White Spirit is a white mineral spirit. | |
| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...voir plus ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. voir moins |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...voir plus FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. voir moins |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...voir plus High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. voir moins |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...voir plus Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. voir moins |  |
