| Alkipol 2250-50 H | Polidur San Luis | Alkipol 2250-50 H is a short oil alkyd emulsion at 50 % solids in water. This product has good air drying properties, excellent final film hardness and gloss and is amine and solvent free. Cero VOC. It is for use in air or forced dried primers and enamels...voir plus Alkipol 2250-50 H is a short oil alkyd emulsion at 50 % solids in water. This product has good air drying properties, excellent final film hardness and gloss and is amine and solvent free. Cero VOC. It is for use in air or forced dried primers and enamels with cero VOC. voir moins | |
| Alkipol 307-50 T | Polidur San Luis | Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for elect...voir plus Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for electrical uses, corrosion resistant primers and cellulose nitrate lacquers. voir moins | |
| Alkipol 434-50 A | Polidur San Luis | Alkipol 434-50 A is a medium oil alkyd resin based on soya-bean oil at 50% in white spirit. This product has good yelowing resistance properties, good air dry and final film hardness and good gloss and elasticity. Alkipol 434-50 A is for use in low cost d...voir plus Alkipol 434-50 A is a medium oil alkyd resin based on soya-bean oil at 50% in white spirit. This product has good yelowing resistance properties, good air dry and final film hardness and good gloss and elasticity. Alkipol 434-50 A is for use in low cost decorative enamels and undercoats, corrosion resistant primers, air drying and stoving primers and topcoats for industrial applications. voir moins | |
| Alkipol 469-100 | Polidur San Luis | Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking pa...voir plus Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking paints. voir moins | |
| Crestabond® M1-04 | Scott Bader | Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-04 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-05 | Scott Bader | Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-20 | Scott Bader | Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-20 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-30 | Scott Bader | Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-30 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-60 | Scott Bader | Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-60 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M1-90 | Scott Bader | Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M1-90 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-05 | Scott Bader | Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating...voir plus Crestabond® M7-05 is a primerless two component acrylic adhesive designed for bonding composites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestabond® M7-15 | Scott Bader | Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstratin...voir plus Crestabond® M7-15 is a primerless two component acrylic adhesive designed for bonding compoisites, thermoplastics, and metals. This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations, demonstrating excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. voir moins | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...voir plus Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. voir moins | |
| Crestomer® 1151A | Scott Bader | Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative u...voir plus Crestomer® 1151A is a structural adhesive and filleting compound that is fast curing, non-sagging and bonds a variety of substrates with little surface preparation. It has a lower odor than other competing structural adhesives and is based on innovative urethane acrylate technology. Crestomer® 1151A shows good impact strength and toughness as well as exhibiting good adhesion and gap filling properties that enables the user greater flexibility in design, saving time and money. The adhesive is especially formulated for use in bulk metering systems. voir moins | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...voir plus Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. voir moins | |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...voir plus Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. voir moins | |
| Crestomer® 1186PA | Scott Bader | Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and off...voir plus Crestomer® 1186PA is a structural adhesive from unique unsaturated urethane acrylate that shows resistance to crack propagation, toughness and good impact strength. It displays good adhesion to a variety of metals, polymeric materials and ceramics and offers structural adhesion even when bonding FRP laminates with a 30mm thick bondline. The multi-purpose gap filling structural adhesive is used in a variety of FRP applications. voir moins | |
| Crestomer® 1196PA | Scott Bader | Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured ...voir plus Crestomer® 1196PA is a low denisty core bonding structural adhesive based on unique urethane acrylate technology that displays outstanding strength and toughness. The adhesive is designed to bond core materials like balsa and rigid PVC foam to semi-cured or cured FRP skins. It also displays a tougher and more durable structural bond than a polyester bonding adhesive or a polyester resin/glass structure. Crestomer® 1196PA also exhibits reduced styrene emissions, great weight savings and more improved cosmetics with the ridding of core print through. Crestomer® 1196PA is suited for use in sandwich construction where the needs are for a high impact-resistant, strong and tough structure. voir moins | |
| Crestomer® Advantage 30 | Scott Bader | Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in...voir plus Crestomer® Advantage 30 is a structural adhesive that is white in color and bonds with a variety of substrates with less surface preparation and a lower odor than competitive materials. It has a quick gel time of 30 minutes and bonded parts can be used in 2 hours and 20 minutes. It is based on unique urethane acrylate technology and displays good impact strength and toughness. With the strong adhesion and gap filling qualities shown by Crestomer® Advantage 30, great flexibility in design is offered, along with time and cost savings. voir moins | |
| Crystic® BP 621CC 30 | Scott Bader | Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 30 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 45 | Scott Bader | Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 45 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC 65 | Scott Bader | Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound i...voir plus Crystic® BP 621CC 65 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 621CC White 20 | Scott Bader | Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical f...voir plus Crystic® BP 621CC White 20 is a preaccelerated, urethane acrylate- and isophthalic polyester-based, high performance bonding paste with a final product colour of white. It offers high shear strength for bonded joints, eliminating the need for mechanical fixings. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-78PA | Scott Bader | Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assemb...voir plus Crystic® BP 90-78PA is a white, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-79PA | Scott Bader | Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembl...voir plus Crystic® BP 90-79PA is a grey, preaccelerated, orthophthalic polyester bonding paste featuring high thixotropy, fast curing, good handling characteristics, and ease of application. This non-sagging, filled compound is specifically designed for the assembly and bonding of GRP mouldings - including panels, insert frames, ribs, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-80PA | Scott Bader | Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanic...voir plus Crystic® BP 90-80PA is a pre-accelerated polyester bonding paste, consisting of a viscous, filled compound containing short glass fibers and flexible and low shrink additives. It features high shear strength, high thixotropy, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP moldings - including internal frames, inserts, ribs, panels, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-82PA | Scott Bader | Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specificall...voir plus Crystic® BP 90-82PA is a pre-accelerated polyester bonding paste, consisting of a viscous, white, filled compound containing a flexible additive. It features high shear strength, high thixotropy, and improved impact resistance. This product is specifically designed for the assembly and bonding of GRP moldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-83PA | Scott Bader | Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically design...voir plus Crystic® BP 90-83PA is a pre-accelerated orthophathlic polyester bonding paste consisting of a non-sagging, filled compound. Key features include ease of application, high thixotropy, and good handling characteristics. This product is specifically designed for the assembly and bonding of GRP moldings, including internal frames, inserts, ribs, panels, and other non-structural bonding applications. voir moins | |
| Crystic® BP 90-83PAHV | Scott Bader | Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically...voir plus Crystic® BP 90-83PAHV is a low exotherm, preaccelerated polyester bonding paste consisting of a viscous, filled compound. It features high thixotropy, low shrink properties, good handling characteristics, and no print through. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, ribs, composite constructions, and car body components. voir moins | |
| Crystic® BP 90-84PA | Scott Bader | Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effec...voir plus Crystic® BP 90-84PA is a lightweight, low exotherm, pre-accelerated, orthophthalic polyester bonding paste consisting of a non-sagging compound. It features high thixotropy, low specific gravity, good handling characteristics, and a visual check for effective catalyst mix. This product is designed for non-structural applications where gap filling may be a secondary requirement. voir moins | |
| Crystic® BP 91-21PA | Scott Bader | Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifica...voir plus Crystic® BP 91-21PA is a preaccelerated isophthalic polyester bonding paste, in the form of a viscous, filled compound. Benefits include high shear strength, increased water resistance, and improved overall mechanical properties. This product is specifically designed for the assembly and bonding of GRP mouldings - including panels, inserts, internal frames, hull-to-deck assemblies, composite constructions, and car body components. voir moins | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...voir plus Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. voir moins | |
| Crystic® Scottbond 117PA | Scott Bader | Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that a...voir plus Crystic® Scottbond 117PA is a high quality orthophthalic polyester resin in a gap filling adhesive paste that has been pre-accelerated to offer a convenient working time. The bonding paste is recognized as having the ability to bond most materials that are standard in the GRP industry. Crystic® Scottbond 117PA shows good adhesion to GRP laminates, offering a stronger bond compared to resin and glass fiber in the laminate. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Dynasylan® 1124 | Evonik Operations GmbH, BL Silanes | Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be us...voir plus Dynasylan® 1124 is a secondary aminofunctional methoxy-silane. The product acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers). It can also be used for the chemical modification of polymers and isocyanates. voir moins | |
| Dynasylan® 4148 | Evonik Operations GmbH, BL Silanes | Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contr...voir plus Dynasylan® 4148 is a ready-to-use silane, soluble in water and most organic solvents. Dynasylan® 4148 is a rheological additive which reduces the viscosity of highly-filled polymer systems, like aluminum trihydroxide-filled polyesters or SMC-pastes. Contrary to most other organofunctional silanes, Dynasylan® 4148 features chemical polarity but has a non-reactive polar group. Furthermore, Dynasylan® 4148 can be used as anti-settling agent for fillers and pigments in paints as well as corrosion inhibitors in glycol based cooling agents. voir moins | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...voir plus Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. voir moins | |
| Dynasylan® SIVO 202 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 202 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 202 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 202 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| Dynasylan® SIVO 203 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silyla...voir plus Dynasylan® SIVO 203 is a new multifunctional aminosilane adhesion promoter that can be used for a wide variety of applications. Dynasylan® SIVO 203 is mainly dedicated for use in adhesives & sealants to improve the adhesion of hybrid products (e.g. silylated polyurethanes, MS Polymers), RTV-silicones, two-part polyurethanes and two-part epoxies to inorganic surfaces and some difficult plastic surfaces. In addition, Dynasylan® SIVO 203 can lead to fast sealant curing and high-crosslinked products and it imparts both additional flexibility and hydrophobicity. voir moins | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMOEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, meta...voir plus Dynasylan® VTMOEO is a bifunctional organosilane possessing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. The dual nature of its reactivity allows Dynasylan® VTMOEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning mainly as an efficient adhesion promoter and/or surface modifier. Dynasylan® VTMOEO is a colorless, low-viscosity liquid with a typical aromatic odor. voir moins | |
| Fenopol 90-100 | Polidur San Luis | Fenopol 90-100 is a rosin modified phenolic resin at 100% of solids. This product presents good solubility at aliphatic solvents, good dielectric properties and improvement of enamel´s gloss and hard dry. It has applications in insulating and oleoresin va...voir plus Fenopol 90-100 is a rosin modified phenolic resin at 100% of solids. This product presents good solubility at aliphatic solvents, good dielectric properties and improvement of enamel´s gloss and hard dry. It has applications in insulating and oleoresin varnishes and is a gloss and dry enamel modifier. voir moins | |
| Fumapol 71-100 | Polidur San Luis | Fumapol 71-100 is a rosin modified fumaric resin at 100% of solids. This product presents a high melting range, fast solvent release and excellent compatibility with alcohols. It has applications in water and alcohol based flexographics inks, auto gloss w...voir plus Fumapol 71-100 is a rosin modified fumaric resin at 100% of solids. This product presents a high melting range, fast solvent release and excellent compatibility with alcohols. It has applications in water and alcohol based flexographics inks, auto gloss waxes and nitrocellulose lacquers. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Mapol 50-100 | Polidur San Luis | Mapol 50-100 is a rosin modified maleic resin at 100% of solids. This product presents improved gloss and sandability in nitrocellulosic lacquers, improved enamel´s gloss and hard dry and excellent copatibility with nitrocellulosic resins. It has applicat...voir plus Mapol 50-100 is a rosin modified maleic resin at 100% of solids. This product presents improved gloss and sandability in nitrocellulosic lacquers, improved enamel´s gloss and hard dry and excellent copatibility with nitrocellulosic resins. It has applications in nitrocellulose sealers and lacquers for wood, oleoresin varnishes and as a gloss and dry enamel modifier. voir moins | |
| Melapol 1010-60 B | Polidur San Luis | Melapol 1010-60 B is a butylated melamine-formaldehyde resin at 60% in xilol-isobutanol. This product provides medium reactivity, good final hardness in stoving enamels and good compatibility with alkyd resins. It is for use in stoving enamels with short,...voir plus Melapol 1010-60 B is a butylated melamine-formaldehyde resin at 60% in xilol-isobutanol. This product provides medium reactivity, good final hardness in stoving enamels and good compatibility with alkyd resins. It is for use in stoving enamels with short, medium and long oil alkyds and stoving enamels with epoxy esters. voir moins | |
| Melapol 1040-60 B | Polidur San Luis | Melapol 1040-60 B is a butylated melamine-formaldehyde resin at 60% in butanol. This product provides high reactivity, excellent gloss and nivelation in stoving enamels and good compatibility with hydroxylated acrylic resins. It is for use in stoving enam...voir plus Melapol 1040-60 B is a butylated melamine-formaldehyde resin at 60% in butanol. This product provides high reactivity, excellent gloss and nivelation in stoving enamels and good compatibility with hydroxylated acrylic resins. It is for use in stoving enamels combined with short, medium and long oil alkyds and stoving enamels combined with acrylic resins and epoxy esters. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| Olgamid 2115-80 X | Polidur San Luis | Olgamid 2115-80 X is a reactive polyamidoamine at 80% in xilol. This product presents excellent reactivity with epoxy resins and Good mixture (Pot Life). It has applications in curing agent for solid and liquid epoxy resins, epoxy enamels and primers for ...voir plus Olgamid 2115-80 X is a reactive polyamidoamine at 80% in xilol. This product presents excellent reactivity with epoxy resins and Good mixture (Pot Life). It has applications in curing agent for solid and liquid epoxy resins, epoxy enamels and primers for maintenance, two component epoxy adhesives and epoxy concrete sealers. voir moins | |
| Policure 5000 | Polidur San Luis | Policure 5000 is unneutralized Trimethylolpropane triacrylated and is a high linking cross polymer. This product presents excellent cured and film hardness and good viscosity reduction. It is for use in varnishes and pigmented paints for wood, Inks and va...voir plus Policure 5000 is unneutralized Trimethylolpropane triacrylated and is a high linking cross polymer. This product presents excellent cured and film hardness and good viscosity reduction. It is for use in varnishes and pigmented paints for wood, Inks and varnishes for plastics, paper and glass. voir moins | |
| Policure 5010 | Polidur San Luis | Policure 5010 is Trimethylolpropane triacrylated that provides excellent cured and film hardness, high crosslinking monomer and good viscosity reduction. It is for use in varnishes and pigmented paints for wood and inks and varnishes for plastics, paper a...voir plus Policure 5010 is Trimethylolpropane triacrylated that provides excellent cured and film hardness, high crosslinking monomer and good viscosity reduction. It is for use in varnishes and pigmented paints for wood and inks and varnishes for plastics, paper and glass. voir moins | |
| Polimer 3100 | Polidur San Luis | Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylat...voir plus Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylated oligomer. voir moins | |
| Polimer 4007 | Polidur San Luis | Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent ...voir plus Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and varnishes and lacquers for wood. voir moins | |
| Polimer 4008 | Polidur San Luis | Polimer 4008 is epoxy acrylated at 80% in TMPTA. This product presents excellent curing speed, is a versatile oligomer for different applications and high film hardness and gloss. It is for use in varnishes and pigmented paints for wood, inks and varnishe...voir plus Polimer 4008 is epoxy acrylated at 80% in TMPTA. This product presents excellent curing speed, is a versatile oligomer for different applications and high film hardness and gloss. It is for use in varnishes and pigmented paints for wood, inks and varnishes for plastics, paper and glass and varnishes and lacquers resistance to risk. voir moins | |
| Polimer 6000 | Polidur San Luis | Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excelle...voir plus Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and Varnishes and lacquers for wood. voir moins | |
| Polisat 620-80 X | Polidur San Luis | Polisat 620-80 X is a saturated polyester resin at 80 % solids in xylene. This product has excellent solubility in a wide range of solventes and excellent compatibility with most solvent based resins. It is for use as a binder for solvent based pigment pa...voir plus Polisat 620-80 X is a saturated polyester resin at 80 % solids in xylene. This product has excellent solubility in a wide range of solventes and excellent compatibility with most solvent based resins. It is for use as a binder for solvent based pigment pastes. voir moins | |
| Polisat 714-70 HF | Polidur San Luis | Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high sol...voir plus Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high solids stoving enamels. voir moins | |
| Polisat 738-65 X | Polidur San Luis | Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane prime...voir plus Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane primers and lacquers for wood and metal of low crosslinking, two component polyurethane matt and low gloss lacquers and cellulose nitrate plasticizer. voir moins | |
| Polisat 768-80 AB | Polidur San Luis | Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use i...voir plus Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use in 2 K PU laquers, lacquers for plastics and leather, overprinting varnishes and is an elasticity modifier of acrylic resins. voir moins | |
| Polistand 920-60 A | Polidur San Luis | Polistand 920-60 A is a binder for aluminium enamels at 60% solids in white spirit. This product has excellent leafing, very good mirroring effect, and good tack free times and final hardening. Uses include decorative enamels with aluminium pastes. | |
| Poliuret 750-60 XD | Polidur San Luis | Poliuret 750-60 XD is one component of aromatic polyurethane at 60% in xilol-PMA. This product presents Fast dry to dust and hard excellent gloss and excellent abrasion resistance. It has applications as a plasticizer for wood floors, a component of polyu...voir plus Poliuret 750-60 XD is one component of aromatic polyurethane at 60% in xilol-PMA. This product presents Fast dry to dust and hard excellent gloss and excellent abrasion resistance. It has applications as a plasticizer for wood floors, a component of polyurethane lacquers for wood, metal lacquers and concrete floors sealers. voir moins | |
| Poliuret 778-75 AE | Polidur San Luis | Poliuret 778-75 AE is a non-reactive aromatic polyurethane at 75% in ethyl acetate. It presents a fast hard dry to dust, good flexibility, fast solvent release and excellent compatibility with nitrocellulose resins. It has applications in nitrocellulose p...voir plus Poliuret 778-75 AE is a non-reactive aromatic polyurethane at 75% in ethyl acetate. It presents a fast hard dry to dust, good flexibility, fast solvent release and excellent compatibility with nitrocellulose resins. It has applications in nitrocellulose plasticizer por laminating inks and adhesives, front and laminating inks and inks for application on rubber and plastics. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Silanes | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Sancryl 825-60 X | Polidur San Luis | Sancryl 825-60 X is a thermoplastic acrylic resin at 60% solids in xylene. This product provides Excellent dry and film hardness, weather resistance, adhesion to metal and plastics and solvent release. It is for use in metal lacquers, coatings for dificul...voir plus Sancryl 825-60 X is a thermoplastic acrylic resin at 60% solids in xylene. This product provides Excellent dry and film hardness, weather resistance, adhesion to metal and plastics and solvent release. It is for use in metal lacquers, coatings for dificult ahesion plastics (abs,pp,etc) and concrete coatings. voir moins | |
| Sancryl 842-60 X | Polidur San Luis | Sancryl 842-60 X is an hydroxylated acrylic resin at 60% in xilol. This product offers excellent weather and yellowing resistance and a high percentage of crosslinking. It is for use in two component polyurethane lacquers for machinery and industrial main...voir plus Sancryl 842-60 X is an hydroxylated acrylic resin at 60% in xilol. This product offers excellent weather and yellowing resistance and a high percentage of crosslinking. It is for use in two component polyurethane lacquers for machinery and industrial maintenance, metal lacquers, and sealants for concrete floors. voir moins | |
| Sancryl 864-60 AB | Polidur San Luis | Sancryl 864-60 AB is an hydroxylated acrylic resin at 60% solids in butyl acetate. This product offers excellent weather and yellowing resistance, gloss and mirror image (DOI). Sancryl 864-60 AB is for use in Two componet polyurethane lacquers, clear coa...voir plus Sancryl 864-60 AB is an hydroxylated acrylic resin at 60% solids in butyl acetate. This product offers excellent weather and yellowing resistance, gloss and mirror image (DOI). Sancryl 864-60 AB is for use in Two componet polyurethane lacquers, clear coat systems and top coats for the automotive industry. voir moins | |
| Sancryl 884-50 ABX | Polidur San Luis | Sancryl 884-50 ABX is an hydroxylated acrylic resin at 50% in butyl acetate:xilol (1:1). This product presents excellent sandability of primers for wood, excellent yelowing resistance and very fast drying and good hardness. It is for use in two component ...voir plus Sancryl 884-50 ABX is an hydroxylated acrylic resin at 50% in butyl acetate:xilol (1:1). This product presents excellent sandability of primers for wood, excellent yelowing resistance and very fast drying and good hardness. It is for use in two component polyurethane primers for wood, two component polyurethane lacquers for wood and two component polyurethane lacquers for machinery. voir moins | |
| TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
| TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Silanes | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| Texicote® 03-084 | Scott Bader | Texicote® 03-084 is a polyvinyl acetate homopolymer emulsion that is recommended as a base emulsion for wet bond adhesives due to its high viscosity and wet-tack. It is also ideal as a base for wood and general purpose adhesives to boost adhesion to sub-f...voir plus Texicote® 03-084 is a polyvinyl acetate homopolymer emulsion that is recommended as a base emulsion for wet bond adhesives due to its high viscosity and wet-tack. It is also ideal as a base for wood and general purpose adhesives to boost adhesion to sub-floors and improve anti-dusting properties. It can also be used as an adhesive or adhesive base in a wide range of applications. voir moins | |
| Texicote® 03-132 | Scott Bader | Texicote® 03-132 is a vinyl-acetate acrylic copolymer, which although developed as a binder for non-woven fabrics, can be used as a paper impregnant, especially for wallpaper bases to improve strippability. This product is ideal for use in bonding adhesiv...voir plus Texicote® 03-132 is a vinyl-acetate acrylic copolymer, which although developed as a binder for non-woven fabrics, can be used as a paper impregnant, especially for wallpaper bases to improve strippability. This product is ideal for use in bonding adhesives for non-woven and disposable fabrics. voir moins | |
| Texicryl® 13-023 | Scott Bader | Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considere...voir plus Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considered for use in mastic formulations, glass fiber bonding tapes and adhesives for expanded polystyrene tiles. It displays good water handling capabilities and offers adhesive bonds high strength. voir moins | |
| Texicryl® 13-031 | Scott Bader | Texicryl® 13-031 is a styrene acrylic copolymer emulsion that is made for use in textured and wall coatings, utility grade ceramic tile adhesives and other applications where high pigment loading and shear stability are needed. | |
| Texicryl® 13-061 | Scott Bader | Texicryl® 13-061 is a styrene acrylic copolymer emulsion that has been created specifically for the production of flexible water-resistant ceramic tile adhesives. It is also ideal for use in exterior wall and elastomeric roof coatings as well as floor til...voir plus Texicryl® 13-061 is a styrene acrylic copolymer emulsion that has been created specifically for the production of flexible water-resistant ceramic tile adhesives. It is also ideal for use in exterior wall and elastomeric roof coatings as well as floor tile adhesives. Silane structures that are on the polymer backbone show good adhesive strength to difficult substrates like green concrete. voir moins | |
| Texicryl® 13-065 | Scott Bader | Texicryl® 13-065 is a styrene acrylic copolymer emulsion that has been created especially as a binder for high performance ceramic tile adhesives along with fix and grouts. It is also Alkyl Phenol Ethoxylate-free. | |
| Texicryl® 13-066 | Scott Bader | Texicryl® 13-066 is a styrene acrylic copolymer emulsion created especially for the making of flexible, water-resistant ceramic tile adhesives. It is particularly suited for floor tile adhesives and is free of Alkyl Phenol Ethoxylate. | |
| Texicryl® 13-070 | Scott Bader | Texicryl® 13-070 is a styrene-acrylic copolymer emulsion that has been created primarily with a variety of filler types into D1 tile adhesives. | |
| Texicryl® 13-073 | Scott Bader | Texicryl® 13-073 is a styrene acrylic copolymer emulsion that can be compounded into adhesives with a high degree of flexibility, allowing it to be used in the production of water-resistant ceramic tile adhesives. It is especially ideal for floor tile adh...voir plus Texicryl® 13-073 is a styrene acrylic copolymer emulsion that can be compounded into adhesives with a high degree of flexibility, allowing it to be used in the production of water-resistant ceramic tile adhesives. It is especially ideal for floor tile adhesives and is Alkyl Phenol Ethoxylate-free. voir moins | |
| Texicryl® 13-076 | Scott Bader | Texicryl® 13-076 is an all-acrylic copolymer that has good water resistance properties and is ideal for use in a variety of coating and binding applications. It is recommended for use in exterior coatings and can also be used as a polymeric additive in ce...voir plus Texicryl® 13-076 is an all-acrylic copolymer that has good water resistance properties and is ideal for use in a variety of coating and binding applications. It is recommended for use in exterior coatings and can also be used as a polymeric additive in cementitious admixtures to improve the physical properties of the system. voir moins | |
| Texicryl® 13-078 | Scott Bader | Texicryl® 13-078 is a styrene acrylic copolymer emulsion that is Alkyl Phenol Ethoxylate-free and designed especially as a binder for high performance ceramic tile adhesives. | |
| Texicryl® 13-190 | Scott Bader | Texicryl® 13-190 is a styrene acrylic copolymer emulsion that is designed to withstand high filler pigment loadings. It is especially suited as a binder for waterborne adhesives that need high flexibility and adhesion. The polyer can be blended with harde...voir plus Texicryl® 13-190 is a styrene acrylic copolymer emulsion that is designed to withstand high filler pigment loadings. It is especially suited as a binder for waterborne adhesives that need high flexibility and adhesion. The polyer can be blended with harder polymers to obtain better flexibility and adhesion. Texicryl® 13-190 is ideal for a variety of water-based adhesives and emulsion paint formulations. It can be formulated into coatings ranging from semi-gloss finishes to high pigment volume concentrations with low costs. voir moins | |
| Texicryl® 13-220 | Scott Bader | Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printi...voir plus Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printing on flat screen and rotary systems. Texicryl® 13-220 also offers good adhesion on most substrates, with flexibility also ideal at low temperatures. Texicryl® 13-220 is suitable for the making of non-woven and flocking adhesives whether by pulverization, foaming or full bath methods. voir moins | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer emulsion that has good water resistance properties and is designed for use in cold seal adhesive applications. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a high performance styrene acrylic copolymer emulsion that has high pigment binding properties making it ideal for use in cold seal adhesive applications. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a high performance styrene acrylic copolymer emulsion that is created for use in cold seal adhesive applications. | |
| Texicryl® 13-602 | Scott Bader | Texicryl® 13-602 is a styrene acrylic copolymer emulsion that is part of the Texicryl® specialty polymer range of applications, designed for use in decorators caulks, flexible fillers and sealant applications. | |
| Texicryl® 17-0330 | Scott Bader | Texicryl® 17-0330 is a styrene acrylic copolymer emulsion that can be used in a variety of water-based adhesives and emulsion paint formulations. It can be incorporated into coatings with properties ranging from semi-gloss finishes to high pigment volume ...voir plus Texicryl® 17-0330 is a styrene acrylic copolymer emulsion that can be used in a variety of water-based adhesives and emulsion paint formulations. It can be incorporated into coatings with properties ranging from semi-gloss finishes to high pigment volume concentration of low cost paints. Texicryl® 17-0330 is especially suited as a binder for waterborne adhesives that need adhesion and flexibility. The product is also designed for use in inks. voir moins | |
| Texicryl® AD8077 | Scott Bader | Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water ...voir plus Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water and slip resistance and white color. voir moins | |
| Texicryl® AD8091 | Scott Bader | Texicryl® AD8091 is a styrene acrylic copolymer emulsion designed for use in high performance applications where good cold temperature and overall flexibility are desired. This product is ideal for use in a variety of applications, including water-based a...voir plus Texicryl® AD8091 is a styrene acrylic copolymer emulsion designed for use in high performance applications where good cold temperature and overall flexibility are desired. This product is ideal for use in a variety of applications, including water-based adhesives, emulsion paints, semi-gloss finish coatings, and high pigment concentration inks. voir moins | |
| Texicryl® S-0933 | Scott Bader | Texicryl® S-0933 is a 33% solution of solid styrene-acrylic resin in water, with ammonia added to enable solubility. This product is designed for use in a variety of flexible packaging applications - including pigmented inks, clear coatings, and adhesives...voir plus Texicryl® S-0933 is a 33% solution of solid styrene-acrylic resin in water, with ammonia added to enable solubility. This product is designed for use in a variety of flexible packaging applications - including pigmented inks, clear coatings, and adhesives. voir moins | |
| Texicryl® S-0933M | Scott Bader | Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coa...voir plus Texicryl® S-0933M is a styrene acrylic copolymer emulsion that has a 33% solids resin solution, solubilized with Monoethanolamine, in water. It is a vehicle made for use in various flexible packaging applications including pigmented systems like inks, coatings and adhesives. When formulated into ink systems, it is ideal for gravure and flexographic applications. Texicryl® S-0933M is designed to give off good gloss, while maintaining low foaming and aiding good printability. voir moins |
