| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...voir plus AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. voir moins | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...voir plus AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). voir moins | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...voir plus AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). voir moins | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL MAM | Hoffmann Mineral | AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL MAM-R | Hoffmann Mineral | AKTISIL MAM-R is an activated SILLITIN V 85, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL PF 216 | Hoffmann Mineral | AKTISIL PF 216 is an activated SILLITIN Z 86, produced by modifying the surface with Bis-(3-triethoxy-silylpropyl)-tetrasulfane. Used as a functional filler either on its own or in combination with another non-reinforcing or reinforcing filler. | |
| AKTISIL PF 777 | Hoffmann Mineral | AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| AKTISIL Q | Hoffmann Mineral | AKTISIL Q is SILLITIN V 90* coated with methacryl silane. | |
| AKTISIL VM 56 | Hoffmann Mineral | AKTISIL VM 56 is an activated SILLITIN Z 86, produced by modifying the surface with Vinyl-triethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL VM 56/89 | Hoffmann Mineral | AKTISIL VM 56/89 is an activated SILLITIN Z 89, produced by modifying the surface with 3-Vinyltriethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Benox® B50-106 | UNITED INITIATORS GMBH & CO KG | Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polyme...voir plus Benox® B50-106 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy white paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-106 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-210 | UNITED INITIATORS GMBH & CO KG | Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-210 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-210 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-230 | UNITED INITIATORS GMBH & CO KG | Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing...voir plus Benox® B50-230 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy lighter blue pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-230 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-513 | UNITED INITIATORS GMBH & CO KG | Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiato...voir plus Benox® B50-513 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy red pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-513 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B50-713 | UNITED INITIATORS GMBH & CO KG | Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent a...voir plus Benox® B50-713 is a fine dispersion of 50% dibenzoyl peroxide in a smooth, non-separating fire resistant creamy onyx pigmented paste form. It can freely be dissolved in monomers and resins and is primarily used with auto body filler or as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B50-713 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...voir plus Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-107 | UNITED INITIATORS GMBH & CO KG | Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt ind...voir plus Benox® B55-107 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in industries which require a product to be further diluted prior to use and in the mine bolt industry. Benox® B55-107 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® B55-108 | UNITED INITIATORS GMBH & CO KG | Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized b...voir plus Benox® B55-108 is a fine dispersion of 55% dibenzoyl peroxide in a smooth, non-separating fire resistant white paste form. It is formulated primarily for use in elevated and ambient temperature curing of unsaturated polyester resins and is characterized by its lower water content, compared to Benox® B55-107. Benox® B55-108 can also be used in two-part adhesive systems based on methacylate or polyester resins. voir moins | |
| Benox® L-50E | UNITED INITIATORS GMBH & CO KG | Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical form...voir plus Benox® L-50E, in the form of a smooth water white low viscosity fire resistant creamy paste, is a fine dispersion of dibenzoyl peroxide. It can be readily dissolved in monomers and resins, is less hazardous, and is easier to use than dry or technical forms of dibenzoyl peroxide (provided the water content and plasticizer are not objectionable. Benox® L-50E is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, unsaturated polyester/vinyl ester resins, and copolymers of these resins. It can also be used in two-part adhesive systems, based on methacrylate or polyester resins, where the creamy consistency allows uniform mixing of the components. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...voir plus EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. voir moins | Request Sample |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...voir plus EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). voir moins | Request Sample |
| EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...voir plus EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). voir moins | Request Sample |
| EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...voir plus EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...voir plus EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...voir plus EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and voir moins | Request Sample |
| EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...voir plus EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. voir moins | Request Sample |
| EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...voir plus EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. voir moins | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...voir plus EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. voir moins | Request Sample |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...voir plus EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. voir moins | Request Sample |
| EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...voir plus EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...voir plus EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...voir plus EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. voir moins | Request Sample |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...voir plus EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. voir moins | Request Sample |
| EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
| EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...voir plus EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. voir moins | Request Sample |
| EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...voir plus EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. voir moins | Request Sample |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...voir plus EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. voir moins | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...voir plus EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. voir moins | Request Sample |
| GLOXIL iM16k A | Hoffmann Mineral | GLOXIL iM16k A is based on hollow glass microspheres from 3M, this product brings further improvements in plastics where weight reduction is an important issue thanks to its surface modification. | |
| GLOXIL iM16k MAM | Hoffmann Mineral | GLOXIL iM16k MAM is a micro hollow glass sphere whose surface has been modified with a special methacrylic functional group. The process parameters are selected in such a way that, on one hand, anchoring to the surface takes place and, on the other hand, ...voir plus GLOXIL iM16k MAM is a micro hollow glass sphere whose surface has been modified with a special methacrylic functional group. The process parameters are selected in such a way that, on one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable by-products, such as occur during in-situ mixing, are therefore practically completely prevented. voir moins | |
| GLOXIL SF 91 A | Hoffmann Mineral | GLOXIL SF 91 A is a hybrid filler made of fiber and Neuburg Siliceous Earth with subsequent modification produces very good properties in plastics where a good mix of rigidity and flexibility is required. | |
| GLOXIL WW SL | Hoffmann Mineral | GLOXIL WW SL is an aqueous dispersion based on modified silica for use in matt water-based coatings improves incorporation, transparency and resistance. | |
| HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...voir plus P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...voir plus P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...voir plus P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. voir moins | Request Sample |
| Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
| SILFITZ 91 | Hoffmann Mineral | SILFIT Z 91 is a natural combination of corpuscular silica and lamellar kaolinite, which has been subjected to a heat treatment. The components and the thermal process lead to a product that offers special performance benefits as a functional filler. | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | SILLIKOLLOID P 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinte. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| SILLIKOLLOID P 87 PURISS | Hoffmann Mineral | SILLIKOLLOID P 87 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| SILLITIN N 85 | Hoffmann Mineral | SILLITIN N 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 85 PURISS | Hoffmann Mineral | SILLITIN N 85 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 87 | Hoffmann Mineral | SILLITIN N 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN V 85 | Hoffmann Mineral | SILLITIN V 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral | SILLITIN Z 86 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | SILLITIN Z 89 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| SONGLIGHT® 1230 | Songwon International AG | SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and u...voir plus SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyesters. Can be used in automotive and industrial coating, decorative paint and wood stains or varnishes. voir moins | |
| SONGNOX® 1010 | Songwon International AG | SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effe...voir plus SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effect in combination with SONGNOX® 1680 and other secondary antioxidants. It can also be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use voir moins | |
| SONGNOX® 1024 | Songwon International AG | SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (...voir plus SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (particularly SONGNOX® 1010) to achieve synergistic performance. voir moins | |
| SONGNOX® 1035 | Songwon International AG | SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility ...voir plus SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility and provides long-term heat stability. voir moins | |
| SONGNOX® 1076 | Songwon International AG | SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used wi...voir plus SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. voir moins | |
| SONGNOX® 1098 | Songwon International AG | SONGNOX® 1098 is hghly effective especially in wire and cable applications used as primary insulation of PP, HDPE, LDPE and other elastomers. Is an antioxidant for Polyamide fibers, molded articles and films. Provides extraction resistance. | |
| SONGNOX® 117B | Songwon International AG | SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term h...voir plus SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term heat stability - protects physical properties during storage and in the end use application. It is also useful for stabilization of Polycarbonates, ABS, and Polyesters. voir moins | |
| SONGNOX® 11B | Songwon International AG | SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides...voir plus SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides long term heat stability - protects physical properties during storage and in the end use application. SONGNOX® 11B can also useful for stabilization of Polycarbonate, ABS, and Polyesters. voir moins | |
| SONGNOX® 1290 | Songwon International AG | SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polysty...voir plus SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polystyrene, ABS terpolymer, PVC, Polyamides, Polyurethanes, Elastomers, Adhesives, Rubbers such as EPDM, SBS and rubber blends with Polyolefins, and natural and synthetic tackifier resins. voir moins | |
| SONGNOX® 1330 | Songwon International AG | SONGNOX® 1330 is a primary antioxidant for organic polymers. It offers extraction resistant in water-quenched PP film lines. SONGNOX® 1330 exhibits high performance in controlling degradation of polyolefins. It is not absorbed by filler in polyolefins. | |
| SONGNOX® 1520 LQ | Songwon International AG | SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplasti...voir plus SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplastic elastomers. voir moins | |
| SONGNOX® 1680 | Songwon International AG | SONGNOX® 1680 is a secondary antioxidant for organic polymers. Applications include polyolefins, polycarbonate, polyester, and styrenics. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. | |
| SONGNOX® 1790 | Songwon International AG | SONGNOX® 1790 is a primary antioxidant for organic polymers. It offers high performance for sterically hindered phenolic antioxidants. It can be used for polyolefin, polyurethane, polystyrene, polyester and polyamide fiber. | |
| SONGNOX® 2450 | Songwon International AG | SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. I...voir plus SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. It is an effective antioxidant for styrenics, synthetic rubbers, POM homo & copolymer, polyurethanes, polyamides, polyesters, MBS and PVC. It can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. voir moins | |
| SONGNOX® 4120 | Songwon International AG | SONGNOX® 4120 is a secondary antioxidant for organic polymers. It is a sulfur containing antioxidant with high molecular weight, and the characteristics of low volatility and high performance. SONGNOX® 4120 performs as a better synergist with phenolic ant...voir plus SONGNOX® 4120 is a secondary antioxidant for organic polymers. It is a sulfur containing antioxidant with high molecular weight, and the characteristics of low volatility and high performance. SONGNOX® 4120 performs as a better synergist with phenolic antioxidant than SONGNOX® DLTDP & DSTDP and etc. It is effective in polyolefins and has high heat resistance and low leaching properties. voir moins | |
| SONGNOX® 4425 | Songwon International AG | SONGNOX® 4425 is a primary antioxidant for organic polymers. It is a non-discoloring antioxidant with a wide range of applications for thermoplastics and adhesives. SONGNOX® 4425 is highly effective in Polyamide and tire cod and high impact Polystyrene, A...voir plus SONGNOX® 4425 is a primary antioxidant for organic polymers. It is a non-discoloring antioxidant with a wide range of applications for thermoplastics and adhesives. SONGNOX® 4425 is highly effective in Polyamide and tire cod and high impact Polystyrene, ABS, Polyesters, most elastomers and rubbers. voir moins |
