| Burez® K80 500D | Lawter | Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionat...voir plus Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionated rosins saponified with potassium hydroxide or sodium. It is designed mostly for emulsion polymerization, wet glue formulations and organic pigment production. voir moins | |
| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...voir plus DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...voir plus DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...voir plus DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). voir moins | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...voir plus DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. voir moins | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...voir plus DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. voir moins | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...voir plus DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. voir moins | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...voir plus DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. voir moins | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...voir plus DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. voir moins | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...voir plus DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. voir moins | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...voir plus DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). voir moins | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...voir plus DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. voir moins | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...voir plus DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...voir plus DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...voir plus MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. voir moins | |
| MAXGARD® 1030 | Lycus Ltd. | MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorpt...voir plus MAXGARD® 1030 is a light yellow powder that is a special blend of benzophenone-2 and benzophenone-6, making it an effective light stabilizer for protecting coatings against UV radiation. This product has a mass density of 1.26 g/cm3 at 25°C and an absorptivity of 52 at 339nm. It is suitable for use in polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, fluorescent pigments and acrylic adhesives. voir moins | |
| MAXGARD® 2700 | Lycus Ltd. | MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C...voir plus MAXGARD® 2700 is a light yellow powder that can be used as an UV stabilizer for protecting coatings from the damaging UV radiation which is a component of natural sunlight. This product has a melting point of 175°C and a mass density of 1.19 g/cm3 at 25°C. It is suitable for use in polyurethane coatings, epoxy coatings, vinyl and acrylic adhesives. voir moins | |
| MAXGARD® 300 | Lycus Ltd. | MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radia...voir plus MAXGARD® 300 is a light yellow powder that is a light stabilizer used for broad-spectrum protection of acrylic adhesives, polyurethane coatings, furniture stains and varnishes, nitrocellulose lacquers, pigments and emulsions from damage caused by UV radiation. This product has a melting point of 130-132°C and a mass density of 1.34 g/cm3 at 25°C. voir moins | |
| MAXGARD® 400 | Lycus Ltd. | MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at ...voir plus MAXGARD® 400 is an off white powder that is used as an UV stabilizer to protect nitrocellulose lacquers, varnishes, and pressure sensitive acrylic adhesives from UV damage. This product has a melting range of 140-143°C and a mass density of 1.27 g/cm3 at 25°C. voir moins | |
| MAXGARD® 500 | Lycus Ltd. | MAXGARD® 500 is a free flowing light yellow powder that is used as an UV absorber and stabilizer to protect oil-based paints, nitrocellulose lacquers, and varnishes. This product has a melting range of 63-65°C and a mass density of 1.33 g/cm3 at 25°C. | |
| MAXGARD® 600 | Lycus Ltd. | MAXGARD® 600 is a 100% active, pale yellow liquid that is used as an UV stabilizer in industrial coatings, such as polyurethanes, as well as vinyl and acrylic adhesives. This product has a melting range of ~5°C and a mass density of 1.27 g/cm3 at 25°C. | |
| MAXGARD® 700 | Lycus Ltd. | MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural s...voir plus MAXGARD® 700 is a free flowing, light yellow powder that is used primarily in polyurethanes, acrylic coatings, alkyd varnishes and vinyl and acrylic adhesives. It can be used as an UV stabilizer to protect the end product from degradation due to natural sunlight. This product has a melting range of 47-49°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® 900 | Lycus Ltd. | MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68...voir plus MAXGARD® 900 is a free flowing light yellow powder which can be used as an UV stabilizer. It is very effective for UV protection of oil-based paints, urethane coatings, pressure sensitive acrylic and vinyl adhesives. This product has a melting range of 68-74°C and a mass density of 1.37 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-2 | Lycus Ltd. | MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacq...voir plus MAXGARD® DPA-2 is a white powder designed to provide good heat stability and UV protection with little to no color contribution to the substrate. It can be used as an UV stabilizer in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a melting point of 93°C and a mass density of 1.16 g/cm3 at 25°C. voir moins | |
| MAXGARD® DPA-8 | Lycus Ltd. | MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This pro...voir plus MAXGARD® DPA-8 is a 100% active, clear light amber, viscous liquid stabilizer that has low color and low volatility. It is often used in acrylic coatings, varnishes, polyurethane coatings, nitrocellulose lacquers, and acrylic and vinyl adhesives. This product has a solidification point of 10°C and a mass density of 1.05 g/cm3 at 25°C. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| Pinerez® 2490 | Lawter | Pinerez® 2490 is a tackifier resin that boosts adhesion and tack in a variety of hot melt and solvent-based adhesives. It is commonly used in pavement coatings. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt ...voir plus Pinerez® 2490 is a tackifier resin that boosts adhesion and tack in a variety of hot melt and solvent-based adhesives. It is commonly used in pavement coatings. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. voir moins | |
| Pinerez® 7024 E | Lawter | Pinerez® 7024 E is a tackifier resin that shows compatibility with various polymers, is stable and is ideally suited to improve adhesion in flooring adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt a...voir plus Pinerez® 7024 E is a tackifier resin that shows compatibility with various polymers, is stable and is ideally suited to improve adhesion in flooring adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. voir moins | |
| Pinerez® 9089 | Lawter | Pinerez® 9089 is a tackifier resin that helps to improve tack in hot melt adhesives and also functions as a cure accelerator in rubber-based adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive ...voir plus Pinerez® 9089 is a tackifier resin that helps to improve tack in hot melt adhesives and also functions as a cure accelerator in rubber-based adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. voir moins | |
| POLYVEST® 110 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resista...voir plus POLYVEST® 110 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 110 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 110 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. voir moins | Request Sample |
| POLYVEST® 130 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resista...voir plus POLYVEST® 130 is a stereospecific, low viscous and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. The apolar, hydrophobic hydrocarbon resin POLYVEST® 130 is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. POLYVEST® 130 is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, release agents for polyurethane foams, cell opener for polyurethane foams, defoamers, modifier of resin systems, modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. voir moins | Request Sample |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...voir plus POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. voir moins | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...voir plus POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. voir moins | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...voir plus POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. voir moins | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...voir plus POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics, and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® eCO HT Bio is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber-based sealants and recycled rubber compounds, polymer modification, and many more. voir moins | Request Sample |
| POLYVEST® eCO MA 75 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessibl...voir plus POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO MA 75 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO MA 75 Bio brings the same well-known performance but has reduced carbon emissions. The polar, hydrophobic hydrocarbon resin POLYVEST® eCO MA 75 Bio is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® eCO MA 75 Bio is used in adhesives and sealants compositions, electrical insulations, and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. voir moins | Request Sample |
| POLYVEST® EP MA 100 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible fo...voir plus POLYVEST® EP MA 100 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. voir moins | Request Sample |
| POLYVEST® HT | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive ...voir plus POLYVEST® HT is a stereospecific, low viscous and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® HT is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® HT exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® HT is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber based sealants and recycled rubber compounds, polymer modification, and many more. voir moins | Request Sample |
| POLYVEST® MA 75 | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® MA 75 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for va...voir plus POLYVEST® MA 75 is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. The polar, hydrophobic hydrocarbon resin POLYVEST® MA 75 is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® MA 75 is used in adhesives and sealants compositions, electrical insulations and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. voir moins | Request Sample |
| SARAWAX SX 105 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic proc...voir plus SARAWAX SX 105 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a drop point of 114-120 °C. The product can be used as a value additive for Hot melts or in plastic processing. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. voir moins | Request Sample |
| SARAWAX SX 80 | Evonik Operations GmbH, BL Coating & Adhesive Resins | SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecu...voir plus SARAWAX SX 80 is a Fischer-Tropsch hard paraffin produced by Shell and distributed by Evonik. This grade is supplied in the form of prills and it has a low congealing point of 81-86 °C. The SARAWAX SX 80 shows high crystallinity and a extremely low molecular weight distribution. Applications include amongst others Hot melts especially for food packaging. The product is compliant to FDA and EU 10/2011 without specific migration limit. SARAWAX are only available from Evonik in Europe, South America, Middle East, North Africa and India. voir moins | Request Sample |
| Snowtack™ 765A | Lawter | Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfac...voir plus Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfaces. It is mechanically stable, has good wash-off behavior and is suitable for use in waterborne adhesives in building and construction and automotive and paper industries. voir moins | |
| Snowtack® 775 A | Lawter | Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended ...voir plus Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. voir moins | |
| Snowtack® 780A | Lawter | Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based d...voir plus Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. voir moins | |
| Snowtack® 880G | Lawter | Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emul...voir plus Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. voir moins | |
| Snowtack™ SE724G | Lawter | Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...voir plus Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. voir moins | |
| Snowtack™ SE780G | Lawter | Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...voir plus Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. voir moins | |
| VESTOPLAST® 206 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 206 is a silane modified product with low viscosity and medium softening point. This product is a moisture-curable reactive system and can be purchased either in drums or 10kg Easy Peel Packages. The product can be used as a raw material for v...voir plus VESTOPLAST® 206 is a silane modified product with low viscosity and medium softening point. This product is a moisture-curable reactive system and can be purchased either in drums or 10kg Easy Peel Packages. The product can be used as a raw material for various applications amongst others automotive and window glazing. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® 308 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 308 is a functionalized grade. It is typically applied as a raw material for the production of hot melts for bonding metal and polar substrates. VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion...voir plus VESTOPLAST® 308 is a functionalized grade. It is typically applied as a raw material for the production of hot melts for bonding metal and polar substrates. VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 408 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 408 is a hard grade with excellent thermal stability under load and tear strength. It is typically applied as a raw material for the production of hot melts, e.g. for the textile-, paper- and packaging industry. Generally, VESTOPLAST® amorphou...voir plus VESTOPLAST® 408 is a hard grade with excellent thermal stability under load and tear strength. It is typically applied as a raw material for the production of hot melts, e.g. for the textile-, paper- and packaging industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 508 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 508 is a grade of low viscosity, long open time and low softening point. This product is typically applied as a raw material for the production of hot melts for the hygienic industry and for the production of mattresses. Generally, VESTOPLAST®...voir plus VESTOPLAST® 508 is a grade of low viscosity, long open time and low softening point. This product is typically applied as a raw material for the production of hot melts for the hygienic industry and for the production of mattresses. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 520 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 520 is a product of higher viscosity with a long open time and a low softening point. This product is typically applied as a raw material for cable filling compounds. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the follo...voir plus VESTOPLAST® 520 is a product of higher viscosity with a long open time and a low softening point. This product is typically applied as a raw material for cable filling compounds. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 608 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 608 is a product with a high softening point combined with a relatively low melt viscosity. It is typically applied as a raw material for the production of hot melt adhesives for the paper and packaging industry. Generally, VESTOPLAST® amorpho...voir plus VESTOPLAST® 608 is a product with a high softening point combined with a relatively low melt viscosity. It is typically applied as a raw material for the production of hot melt adhesives for the paper and packaging industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 703 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 703 is a grade of low melt viscosity and short open time. It is applied as a raw material for the production of hot melt adhesives for the packaging- and electrical industry as well as for fiber and filament fixation in carpets. Generally, VES...voir plus VESTOPLAST® 703 is a grade of low melt viscosity and short open time. It is applied as a raw material for the production of hot melt adhesives for the packaging- and electrical industry as well as for fiber and filament fixation in carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 704 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 704 is a soft grade with a relatively short open time. It is applied as a raw material for the production of sprayable hot melt adhesives for the hygienic industry, as well as for labelling and production of sealing compositions. Generally, VE...voir plus VESTOPLAST® 704 is a soft grade with a relatively short open time. It is applied as a raw material for the production of sprayable hot melt adhesives for the hygienic industry, as well as for labelling and production of sealing compositions. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 708 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 708 is a relatively soft product of low melt viscosity and a good thermal stability under load. It is applied as a raw material for the production of hot melt adhesives for the hygienic-, paper- and packaging industry as well as for fiber and ...voir plus VESTOPLAST® 708 is a relatively soft product of low melt viscosity and a good thermal stability under load. It is applied as a raw material for the production of hot melt adhesives for the hygienic-, paper- and packaging industry as well as for fiber and filament fixation in carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 750 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 750 shows a good tear strength and elongation at break combined with a relatively low softening point. This product is applied as a raw material for the production of hot melt adhesives for the hygienic and woodworking industry. Generally, VES...voir plus VESTOPLAST® 750 shows a good tear strength and elongation at break combined with a relatively low softening point. This product is applied as a raw material for the production of hot melt adhesives for the hygienic and woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 751 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: ...voir plus VESTOPLAST® 751 is a high viscosity product with a medium softening point. This product can be used as a raw material for various applications such as automotive. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® 792 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 792 is a high viscous grade of good tear strength and elongation at break. This product is applied as a raw material for the production of hot melt adhesives for the furniture industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO...voir plus VESTOPLAST® 792 is a high viscous grade of good tear strength and elongation at break. This product is applied as a raw material for the production of hot melt adhesives for the furniture industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 828 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 828 shows a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges, hot melt adhesives fo...voir plus VESTOPLAST® 828 shows a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges, hot melt adhesives for the woodworking industry, heavy coating compounds for carpet tiles and for preshaped-car carpets. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 888 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 888 is a high viscous product with good thermal stability under load and a short open time. This product is typically applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges ...voir plus VESTOPLAST® 888 is a high viscous product with good thermal stability under load and a short open time. This product is typically applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges as well as for hot melt adhesives for the woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® 891 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® 891 is a high viscosity product with a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bri...voir plus VESTOPLAST® 891 is a high viscosity product with a good thermal stability under load and a relatively short open time. This product is applied as a raw material for the production of polymer modified bitumen for waterproofing membranes for roofing and bridges as well as for hot melt adhesives for the woodworking industry. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® EP 807 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 80...voir plus VESTOPLAST® EP 807 is a low viscosity product with a high softening point and high shear adhesion failure temperature. This product can be used as a raw material for various applications amongst others automotive and packaging. By adding VESTOPLAST® EP 807 the adhesion to e.g. PP can be improved. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® EP V2094 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Lo...voir plus VESTOPLAST® EP V2094 is a low viscosity product with a an excellent hot tack and adhesion to various substrates such as PP, PE and foams.This product can be used as a raw material for various low viscosity applications especially hygiene and matresses. Low process temperatures are possible with heat stability still remaining high. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® EP V2103 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, t...voir plus VESTOPLAST® EP V2103 is a low viscosity product with a high shear adhesion failure temperature and a medium to high softening point. This product can be used as a raw material for various low viscosity applications especially packaging. In formulations, the polymer shows a very short setting time which enables for fast production processes. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability. voir moins | Request Sample |
| VESTOPLAST® S | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® S is applied as a raw material for the production of polymer modified bitumen for road construction. This product has a melt viscosity at 190 degrees Celsius. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following ben...voir plus VESTOPLAST® S is applied as a raw material for the production of polymer modified bitumen for road construction. This product has a melt viscosity at 190 degrees Celsius. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOPLAST® SR | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOPLAST® SR is applied as a raw material for the production of polymer modified bitumen for road construction. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bondin...voir plus VESTOPLAST® SR is applied as a raw material for the production of polymer modified bitumen for road construction. Generally, VESTOPLAST® amorphous poly-alpha-olefins (APAO) provide the following benefits: excellent adhesion and hot tack properties; bonding to various substrates; good cohesion and high thermal stability; good moisture and gas barrier behavior; and very good hydrolytic and UV stability. voir moins | Request Sample |
| VESTOWAX® C 20 Flakes/Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. ...voir plus VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® C 60 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a ...voir plus VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® C 60 Prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applicatio...voir plus VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® C40 Micro prills | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® C40 is a Fischer-Tropsch wax oxidate with an acid number of 24-27 mg KOH/g | Request Sample |
| VESTOWAX® EH 100 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-...voir plus VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® FM 1012 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® FM 1012 is a micronised Fischer-Tropsch/PFTE wax. | Request Sample |
| VESTOWAX® H 2050 MG | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® H 2050 MG is a non-functionalised Fischer-Tropsch hard paraffin. | Request Sample |
| VESTOWAX® SH 105 Pellets | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-P...voir plus VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® SH 105 Powder | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Pr...voir plus VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| VESTOWAX® SH 112 | Evonik Operations GmbH, BL Coating & Adhesive Resins | VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Proces...voir plus VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. voir moins | Request Sample |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...voir plus A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. voir moins |  |
| Double Planetary Mixer | Charles Ross & Son Company | Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available. |  |
