| CUMAR® 105 | Neville Chemical Company | CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne ...voir plus CUMAR® 105 is an aromatic flaked resin that promotes wetting of pigments and fillers, improves resistance to acids and alkalis, maintains thermal stability and enables leafing characteristics for metallic pigments. It is used in high solids solvent-borne and epoxy based coatings, IV ink modifiers, adhesives and sealants. voir moins | |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| LithoFill 100 | LITHOS Industrial Minerals GmbH | LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, an...voir plus LithoFill 100 is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| LithoFill BM | LITHOS Industrial Minerals GmbH | LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...voir plus LithoFill BM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| LithoFill MM | LITHOS Industrial Minerals GmbH | LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, ant...voir plus LithoFill MM is a natural aluminium-silicate Zeolite with a high content of Clinoptilolite. It exhibits an extremely high porosity and cationic exchange capacity, making it suitable for use in paints, coatings, and adhesives as a filler, odor reducer, anti-settling agent, and thickener. voir moins | |
| LX®-1035 Resin | Neville Chemical Company | LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry ...voir plus LX®-1035 Resin is a flaked resin that improves cohesive strength and promotes heat resistance of adhesives. In addition it can contribute to rapid solvent release and faster drying of litho inks. It has applications in the adhesives and sealants industry as well as in certain coatings related to the automobile industry. voir moins | |
| LX®-1200 | Neville Chemical Company | LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...voir plus LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. voir moins | |
| LX®-1200, 130 | Neville Chemical Company | LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint. | |
| LX®-2161 Resin | Neville Chemical Company | LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to lit...voir plus LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. voir moins | |
| LX®-238 Resin | Neville Chemical Company | LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concret...voir plus LX®-238 Resin is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, is soluble in aromatic and aliphatic solvents/oils and has applications for use in high solids solvent-borne alkyd based coatings and concrete cure compounds. voir moins | |
| NEVCHEM® 100 | Neville Chemical Company | NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are use...voir plus NEVCHEM® 100 is a thermoplastic hydrocarbon resin that improves track and bond strength in adhesive and caulks, promote wetting of pigments and fillers, provide leafing characteristics for metallic pigments and enable good thermal stability. They are used in hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and litho printing inks. voir moins | |
| NEVCHEM® 110 | Neville Chemical Company | NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to ...voir plus NEVCHEM® 110 is a thermoplastic hydrocarbon resin that promotes tack and bond strength in adhesive and caulks, enhances wetting and pigments of fillers, provide leafing characteristics for metallic pigments and give thermal stability. They are applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings and be used in asphalt modification. voir moins | |
| NEVCHEM® 120 | Neville Chemical Company | NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteris...voir plus NEVCHEM® 120 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product promotes tack and bond strength in adhesive and caulks, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 130 | Neville Chemical Company | NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applie...voir plus NEVCHEM® 130 is a thermoplastic hydrocarbon resin. This product contains compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. They can be applied to hot melt and construction adhesives, sealants and caulks, high solids solvent-borne and alkyd based coatings, UV ink modification and asphalt modification. voir moins | |
| NEVCHEM® 140 | Neville Chemical Company | NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks a...voir plus NEVCHEM® 140 is a thermoplastic hydrocarbon resin produced from petroleum mixed from aromatic/aliphatic feedstreams. This product can be applied to construction adhesives, sealants, high solids solvent-borne and alkyd based coatings, litho printing inks and asphalt modification. voir moins | |
| NEVCHEM® 150 | Neville Chemical Company | NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has ap...voir plus NEVCHEM® 150 is a thermoplastic hydrocarbon resin derived from petroleum mixed from aromatic/aliphatic feedstreams. This product is compatible with medium and long oil alkyds, improves acid and moisture resistance and contains thermal stability. It has applications to sealants and construction adhesives. voir moins | |
| NEVCHEM® 200 | Neville Chemical Company | NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to ho...voir plus NEVCHEM® 200 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility and tackifier for EVA, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments and offers thermal stability. It is applied to hot melt and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings, UV ink modification and concrete cure. voir moins | |
| NEVCHEM® 220 | Neville Chemical Company | NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is appl...voir plus NEVCHEM® 220 is a thermoplastic C9 hydrocarbon resin that has excellent compatibility with a range of polymers and elastomers, enhances wetting of pigments and fillers, provides leafing characteristics for metallic pigments, and improves gloss. It is applied to hot melt, solvent based and construction adhesives, sealants, high solids solvent-borne and epoxy based coatings and used in asphalt modification. voir moins | |
| NEVCHEM® 240 | Neville Chemical Company | NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This prod...voir plus NEVCHEM® 240 is a thermoplastic C9 hydrocarbon resin compatible with a range of polymers and elastomers that provides leafing characteristics for metallic pigments as well as improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and is used in asphalt modification. voir moins | |
| NEVCHEM® 250 | Neville Chemical Company | NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied t...voir plus NEVCHEM® 250 is a thermoplastic C9 hydrocarbon resin that is compatible with a range of polymers and elastomers, enhances the wetting of pigments and fillers, improves gloss and increases cohesive strength in SBC based adhesives. This product is applied to solvent based and construction adhesives, sealants, high solids solvent-borne and alkyd based coatings and used in asphalt modification. voir moins | |
| NEVEX® 1069 | Neville Chemical Company | NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains hea...voir plus NEVEX® 1069 is a pure monomer modified C9 aromatic hydrocarbon resin that has compatibility with EVA copolymers, promotes stress and strain properties for EVA systems, enhances wetting of pigments and fillers, improves moisture resistance and contains heat stability. It has applications in hot melt adhesives, as a modifier for epoxy and alkyd based coatings, in construction and high solid solvent based adhesives and in asphalt modification. voir moins | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...voir plus NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. voir moins | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins | Request Sample |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins | Request Sample |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins | Request Sample |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | Request Sample |
| REAXIS® C114 | Reaxis Inc. | REAXIS® C114 is a versatile, liquid tin-based catalyst that is used in a number of applications including: esterifications, polyurethane coatings and resins. As well as aiding and improving the cure time of silicone resins and salines. | |
| REAXIS® C125 | Reaxis Inc. | REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can...voir plus REAXIS® C125 is a liquid tin-based catalyst that is used in a number of applications, including: esterifications, Polyurethanes (CASE) and Silicone condensation reactions. It can give enhanced storage stability in various RTV silicone formulations. It can also be utilized either neat or as a mixture in alcohols. REAXIS® C125 is typically used at concentrations ranging from 0.01 - 0.20 wt%. voir moins | |
| REAXIS® C129LC | Reaxis Inc. | REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act ...voir plus REAXIS® C129LC is a versatile, liquid tin-based catalyst that is used in a number of applications, including: oleochemical esterifiction, polyurethane coatings and resins. It can also improve the curing time of silicone resins and salines. As well as act as a catalysis of lactone polymerization to form biodegradable polymers. REAXIS® C129LC can be utilized neat or as a mixture in alcohols. This product is typically used at concentrations ranging from 0.01 - 0.20 wt% at 80 - 240 °C. voir moins | |
| REAXIS® C154 | Reaxis Inc. | REAXIS® C154 is a white crystalline product that is used in the curing of thermoplastic elastomer. Made of Stannous Chloride Dihydrate, it is used in Sn/Pd activator formulations for POP. This product is also a preferred tin source for tin/nickel alloy pl...voir plus REAXIS® C154 is a white crystalline product that is used in the curing of thermoplastic elastomer. Made of Stannous Chloride Dihydrate, it is used in Sn/Pd activator formulations for POP. This product is also a preferred tin source for tin/nickel alloy plating and as a surface color modifier for art glass. voir moins | |
| REAXIS® C160 | Reaxis Inc. | REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activit...voir plus REAXIS® C160 is a high-activity solid inorganic tin based catalyst used in the synthesis of organic esters and plasticizers. Made of Stannous Oxalate, this product can be used to complete conversions with short reaction times due to high catalytic activity with minimal secondary reactions and colored by-products when compared to acid catalysts. REAXIS® C160 is non-corrosive and can be used at concentrations ranging from 0.01 - 0.2 wt% at 160 - 260°C. voir moins | |
| REAXIS® C162 | Reaxis Inc. | REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and sol...voir plus REAXIS® C162 is an inorganic, white powder, tin catalyst used in the synthesis of polyesters and and oleo-based esters. Made of Stannous Chloride Anhydrous, REAXIS® C162 can be used in the crosslinking of elastomers, synthesis of polyester polyols and solubility in polar solvents. It also finds use in Sn/Pd activator formulations for POP as well as a preferred tin source for tin/nickel alloy plating and as a surface color modifier for art glass. voir moins | |
| REAXIS® C188 | Reaxis Inc. | REAXIS® C188 is a free-flowing, dry black powder, of stable tin(II) oxide powder that has excellent catalytic properties for esterification reactions. This product is used at typical concentrations ranging from 0.01 - 0.20 wt% at 160 - 260°C. In addition...voir plus REAXIS® C188 is a free-flowing, dry black powder, of stable tin(II) oxide powder that has excellent catalytic properties for esterification reactions. This product is used at typical concentrations ranging from 0.01 - 0.20 wt% at 160 - 260°C. In addition, REAXIS® C188 is neutral and non-corrosive and can complete conversions with short reaction times due to its high catalytic activity. It has minimal secondary reactions and colored by-products when compared to other acid catalysts. And is very useful for oleochemical ester reactions. REAXIS® C188 is well suited for use in the metal finishing industry for tin and tin alloy plating processes. voir moins | |
| REAXIS® C208 | Reaxis Inc. | REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon reque...voir plus REAXIS® C208 is a octyl-based organotin dissolved in xylene (50%). A yellowish liquid, it can be used for the production of polyurethane coatings, RTV silicones and saline-modified polyethylene. Custom formulations of REAXIS® C208 are available upon request. voir moins | |
| REAXIS® C211 | Reaxis Inc. | REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extend...voir plus REAXIS® C211 is a proprietary catalyst based on a modified organotin compound. A yellowish liquid, it has been designed for catalysis of polyurethane reactions. Advantages include: high selectiveity for the isocyanate/alcohol reaction, low foaming, extended pot life and low color. voir moins | |
| REAXIS® C214 | Reaxis Inc. | REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) fo...voir plus REAXIS® C214 is a versatile tin mercaptide catalyst that can be used in various polyurethane coatings formulations that demand hydrolytic stability and selectivity. A clear to slightly yellow liquid, it is usually more reactive than DBTL (REAXIS® C218) for most polyurethane systems, resulting in quicker cure times.In addition, REAXIS® C214 can be used in waterborne systems. voir moins | |
| REAXIS® C216 | Reaxis Inc. | REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C....voir plus REAXIS® C216 is a liquid organotin catalyst that contains dioctyltin functionality. This provides improved toxicological properties compared with dibutyltin based catalysts. This product is used at concentrations ranging from 0.01 - 1.0 wt% at 80 - 240°C. Additional features and applications of REAXIS® C216 can be used as a catalysis for polyurethane reactions, curing of silicone resins, esterification and transesterification reactions and the production of silicone-modified polyethylenes. voir moins | |
| REAXIS® C218 | Reaxis Inc. | REAXIS® C218 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. This product is typically used at concentrations ranging from 0.01 - 1.0 wt% at 160 - 260°C. Additionally REAXIS® C218 c...voir plus REAXIS® C218 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. This product is typically used at concentrations ranging from 0.01 - 1.0 wt% at 160 - 260°C. Additionally REAXIS® C218 can be used as a catalysis for isocyanate/alcohol reactions, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and the production of saline modified polyethylenes voir moins | |
| REAXIS® C220 | Reaxis Inc. | REAXIS® C220 is a liquid catalyst that contains monobutyltin functionality. The main uses are in catalysis of esterification and polycondensation reactions. REAXIS® C220 is well suited for the production of plasticizers, catalysis of saturated and unsatur...voir plus REAXIS® C220 is a liquid catalyst that contains monobutyltin functionality. The main uses are in catalysis of esterification and polycondensation reactions. REAXIS® C220 is well suited for the production of plasticizers, catalysis of saturated and unsaturated polyesters. I can also improve the curing time of polyurethane based powder coatings. voir moins | |
| REAXIS® C221 | Reaxis Inc. | REAXIS® C221 is a versatile organotin catalyst that can be used in various silicone and polyurethane applications. REAXIS® C221 is well suited for use as a catalysis of urethanes where low color is required, esterification and transesterification reaction...voir plus REAXIS® C221 is a versatile organotin catalyst that can be used in various silicone and polyurethane applications. REAXIS® C221 is well suited for use as a catalysis of urethanes where low color is required, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and the production of saline modified polyethylenes. voir moins | |
| REAXIS® C223 | Reaxis Inc. | REAXIS® C223 is a yellowish liquid catalyst that is utilized suited for the synthesis of polyurethane systems, polycondensation reactions of RTV silicone resins and salines. REAXIS® 223 is also available in special formulations upon request. | |
| REAXIS® C225 | Reaxis Inc. | REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This produ...voir plus REAXIS® C225 is a versatile organotin catalyst that can be used in various applications, including polyurethane coatings and polymers. It has a higher catalytic activity compared to other grades of DBTL, due to significantly higher tin content. This product is used at concentrations ranging from 0.01 - 1.0 wt%. REAXIS® C225 is well suited for use as a catalysis of isocyanate/alcohol reactions, esterification and transesterification reactions, silicone condensations (e.g. RTV resins) and saline modified polyethylenes. voir moins | |
| REAXIS® C226 | Reaxis Inc. | REAXIS® C226 is a yellowish liquid catalyst that is well suited for the synthesis of polyurethane systems and the polycondensation reactions of RTV silicone resins and salines. REAXIS® C226 is also available in special formulations upon request. | |
| REAXIS® C227 | Reaxis Inc. | REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyureth...voir plus REAXIS® C227 is yellowish liquid catalyst used in polyurethane systems. This catalyst exhibits a high activity and improved hydrological stability. REAXIS® C227 is well suited for use in solvent borne polyurethane coatings as well as water borne polyurethane coatings. voir moins | |
| REAXIS® C228 | Reaxis Inc. | REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and...voir plus REAXIS® C228 is a yellowish liquid catalyst used in polyurethane systems. This catalyst is a very active catalyst and is a less toxic analogue to REAXIS® C223 (dibutyltin diacetate). REAXIS® C228 is well suited for use in producing polyurethane resins and crosslinking, silicone condensations and esterifications voir moins | |
| REAXIS® C232 | Reaxis Inc. | REAXIS® C232 is a solid, amorphous organotin catalyst that is well suited for esterification and transesterification reactions, polycondesation reactions and the production of polyester and alkyd resins. The toxicological properties of REAXIS® C232 are b...voir plus REAXIS® C232 is a solid, amorphous organotin catalyst that is well suited for esterification and transesterification reactions, polycondesation reactions and the production of polyester and alkyd resins. The toxicological properties of REAXIS® C232 are better compared to its dibutyltin counterparts. It is typically used at concentrations ranging from 0.01 - 0.5 wt%, depending on the application. voir moins | |
| REAXIS® C233 | Reaxis Inc. | REAXIS® C233 is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and salines as well as the production of poly...voir plus REAXIS® C233 is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and salines as well as the production of polycarbonate raw materials. REAXIS® C233 is slightly sensitive to moisture. It is typically used at concentrations ranging from 0.1 - 1.0 wt%. voir moins | |
| REAXIS® C233T | Reaxis Inc. | REAXIS® C233T is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and silanes as well as the production of pol...voir plus REAXIS® C233T is a liquid organotin catalyst that is well suited for the catalysis of isocyanate/alcohol reactions, transesterification reactions at 80 - 240°C, polycondensation reactions of RTV silicone resins and silanes as well as the production of polycarbonate raw materials. voir moins | |
| REAXIS® C248 | Reaxis Inc. | REAXIS® C248 is a solid, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248 is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the ...voir plus REAXIS® C248 is a solid, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248 is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the synthesis of alkyd and polyester resins, as well as the production of polycarbonates, electrodeposition coatings. REAXIS® C248 is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. voir moins | |
| REAXIS® C248D | Reaxis Inc. | REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acryl...voir plus REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the synthesis of alkyd and polyester resins, as well as the production of polycarbonates, electrodeposition coatings. REAXIS® C248D is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. voir moins | |
| REAXIS® C248LC | Reaxis Inc. | REAXIS® C248LC is a solid, low particle size, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. REAXIS® C248LC is well suited for the transesterification of vinyl acetate or acrylic acid copolymers as well ...voir plus REAXIS® C248LC is a solid, low particle size, amorphous organotin catalyst that is used mainly in esterification and polycondensation reactions. REAXIS® C248LC is well suited for the transesterification of vinyl acetate or acrylic acid copolymers as well as the production of polycarbonates. In addition it can also be used for the electrodeposition coatings and the synthesis of alkyd and polyester resins. REAXIS® C248LC is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. voir moins | |
| REAXIS® C250 | Reaxis Inc. | REAXIS® C250 is a solid, amorphous organotin catalyst that is typically utilized in esterification and polycondensation reactions. REAXIS® C250 is well suited for the production of saturated and unsaturated polyester synthesis and alkyd resins. It can als...voir plus REAXIS® C250 is a solid, amorphous organotin catalyst that is typically utilized in esterification and polycondensation reactions. REAXIS® C250 is well suited for the production of saturated and unsaturated polyester synthesis and alkyd resins. It can also improve the curing time of silicone resins and salines. REAXIS® C250 is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 280°C. voir moins | |
| REAXIS® C256 | Reaxis Inc. | REAXIS® C256 is a solid white powder, which is an organotin based catalyst that is typically used in esterification and polycondensation reactions. Made of Monobutyltin Hydroxide Oxide it is typically used at concentrations ranging from 0.01 - 0.5 wt% at ...voir plus REAXIS® C256 is a solid white powder, which is an organotin based catalyst that is typically used in esterification and polycondensation reactions. Made of Monobutyltin Hydroxide Oxide it is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 280°C. REAXIS® C256 is well suited for use in saturated and unsaturated polyester synthesis, alkyd resin production and transesterification reactions. voir moins | |
| REAXIS® C311X | Reaxis Inc. | REAXIS® C311X is a light yellow liquid catalyst in xylene. The main use is for the catalysis of silicone and urethane CASE products. | |
| REAXIS® C317 | Reaxis Inc. | REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification a...voir plus REAXIS® C317 is a yellowish liquid catalyst that can be used in various applications. The catalyst is manufactured from synthetic raw materials and provides excellent temperature and color stability. REAXIS® C317 is well suited for use in esterification and transesterification reactions, isocyanate/alcohol reactions for urethane coatings as well as silicone condensation reactions, especially with RTV silicones. voir moins | |
| REAXIS® C318 | Reaxis Inc. | REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use ...voir plus REAXIS® C318 is a yellowish liquid catalyst used in the condensation cure of silicones and the synthesis and curing of polyurethanes. It is considered a slower catalyst compared to its butyl and methyl-based analogues. REAXIS® C318 is well suited for use as a catalyst in the production of RTV silicone adhesives and sealants, polyurethane elastomers, polyurethane adhesive and sealants as well as polyurethane coatings. voir moins | |
| REAXIS® C319 | Reaxis Inc. | REAXIS® C319 is a yellowish liquid catalyst that is used in the synthesis and curing of polyurethanes. REAXIS® C319 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C321 | Reaxis Inc. | REAXIS® C321is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C321 is well suited for more of a delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C322 | Reaxis Inc. | REAXIS® C322 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C322 is well suited for a more delayed cure time when compared to organotin carboxylates. | |
| REAXIS® C325 | Reaxis Inc. | REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, pol...voir plus REAXIS® C325 is a yellowish liquid catalyst of high activity used in the condensation cure of silicones and the production of polyurethanes. REAXIS® C325 is well suited for use as a catalyst in the manufacturing of RTV silicone adhesives and sealants, polyurethane elastomers, adhesive and sealants and coatings. voir moins | |
| REAXIS® C333E50 | Reaxis Inc. | REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol...voir plus REAXIS® C333E50 is a clear liquid catalyst that is well suited for curing a wide selection of solventborne polyurethane-based formulations. It exhibits a high selectivity for the NCO/OH reaction. And is supplied as a 50% active catalyst in ethylene glycol. REAXIS® C333E50 can be supplied in other diluents. voir moins | |
| REAXIS® C333W50 | Reaxis Inc. | REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied a...voir plus REAXIS® C333W50 is a hydrolytically stable catalyst used for curing waterborne polyurethane systems. It exhibits a high selectivity for the NCO/OH reaction which leads to improved physical properties and over all development. REAXIS® C333W50 is supplied as a 50% active catalyst in water and can be supplied in other diluents. voir moins | |
| REAXIS® C416 | Reaxis Inc. | REAXIS® C416 is a yellowish liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C416 provides for more of a delayed action cure and enhanced hydroltic stability compared to organotin carboxylates. | |
| REAXIS® C417 | Reaxis Inc. | REAXIS® C417 is a yellowish liquid catalyst based on dioctyltin oxide. REAXIS® C417 is used in the curing of silicone and saline systems and is well suited for the curing of alkoxy-based RTV silicones, oxime-based RTV silicones and MS Polymers. | |
| REAXIS® C418 | Reaxis Inc. | REAXIS® C418 is a liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C418 is well suited for a delayed cure reaction and enhanced hydrological stability when compared to organotin carboxylates. | |
| REAXIS® C616 | Reaxis Inc. | REAXIS® C616 is a yellowish liquid made of an effective zinc catalyst that is well suited for use in polyurethane and polyester resins. REAXIS® C616 exhibits lower reactivity when compared to organotins and can provide pot life extension in 2 component sy...voir plus REAXIS® C616 is a yellowish liquid made of an effective zinc catalyst that is well suited for use in polyurethane and polyester resins. REAXIS® C616 exhibits lower reactivity when compared to organotins and can provide pot life extension in 2 component systems. As typical with most zincs, REAXIS® C616 can catalyze the hydroxyl/water in polyurethane reactions. voir moins | |
| REAXIS® C620 | Reaxis Inc. | REAXIS® C620 is a yellowish liquid made of Zinc Octoate which can be used as a catalyst for polyurethane resin synthesis and crosslinking. In polyurethanes, it will promote lower reactivity when compared to organotins and provides pot life extension in 2-...voir plus REAXIS® C620 is a yellowish liquid made of Zinc Octoate which can be used as a catalyst for polyurethane resin synthesis and crosslinking. In polyurethanes, it will promote lower reactivity when compared to organotins and provides pot life extension in 2-component systems. REAXIS® C620 can also be used as a curing catalyst for unsaturated polyesters. In addition, it can also be used to catalyze a variety of isocyanates for crosslinking reactions. voir moins | |
| REAXIS® C623 | Reaxis Inc. | REAXIS® C623 is an off white solid zinc compound that is well suited for use as a catalyst in the condensation of silicone resins and the crosslinking of powder resins | |
| REAXIS® C634 | Reaxis Inc. | REAXIS® C634 is a non-corrosive, white solid zinc based catalyst, used for esterification reactions. This product is typically used at concentrations ranging from 0.01 - 0.5 wt% at 160 - 260°C. Reaxis® C634 is well suited for complete conversions with sho...voir plus REAXIS® C634 is a non-corrosive, white solid zinc based catalyst, used for esterification reactions. This product is typically used at concentrations ranging from 0.01 - 0.5 wt% at 160 - 260°C. Reaxis® C634 is well suited for complete conversions with short reaction times due to high catalytic activity as well as minimal secondary reactions and colored by-products compared to acid catalysts. voir moins | |
| REAXIS® C716 | Reaxis Inc. | REAXIS® C716 is an effective liquid catalyst for polyurethane. Made of a bismuth-based catalyst, it can provide a good balance in potlife and cure. REAXIS® C716 is good a non-tin alternative to DBTL for various polyurethane coatings, adhesive/sealants and...voir plus REAXIS® C716 is an effective liquid catalyst for polyurethane. Made of a bismuth-based catalyst, it can provide a good balance in potlife and cure. REAXIS® C716 is good a non-tin alternative to DBTL for various polyurethane coatings, adhesive/sealants and elastomer systems. voir moins | |
| REAXIS® C717 | Reaxis Inc. | REAXIS® C717 is a mixed metal liquid catalyst used for the production of polyurethane systems, including 2Ks, prepolymers, and elastomers. REAXIS® C717 is characterized by a high selectivity for the NCO/OH reaction, especially in 2K formulations. | |
| REAXIS® C719 | Reaxis Inc. | REAXIS® C719 is a colorless to light yellow aqueous solution of Bi(CH3SO3)3 produced by a proprietary process from high purity raw materials. It is primarily used to replenish bismuth in bismuth and bismuth alloy plating baths. It is also used in elecrode...voir plus REAXIS® C719 is a colorless to light yellow aqueous solution of Bi(CH3SO3)3 produced by a proprietary process from high purity raw materials. It is primarily used to replenish bismuth in bismuth and bismuth alloy plating baths. It is also used in elecrodepostion coating formulations. voir moins | |
| REAXIS® C723 | Reaxis Inc. | REAXIS® C723 is a slightly yellow liquid bismuth-based catalyst used for the catalysis of polyurethane systems. | |
| REAXIS® C726 | Reaxis Inc. | REAXIS® C726 is a slightly yellow liquid bismuth-based catalyst used for the catalysis of polyurethane systems. | |
| REAXIS® E120 | Reaxis Inc. | REAXIS® E120 s a stabilized high quality aqueous tin salt solution that is manufactured by a proprietary direct process to provide exceptionally low impurity levels. It is used as the tin source in acid tin and solder electroplating baths. | |
| REAXIS® E140 | Reaxis Inc. | REAXIS® E140 is a fast dissolving alkaline tin salt solution manufactured by a proprietary direct process that yields consistently high purity product. It is used as the tin replenisher in alkaline tin and tin alloy plating baths. REAXIS® E140 also finds ...voir plus REAXIS® E140 is a fast dissolving alkaline tin salt solution manufactured by a proprietary direct process that yields consistently high purity product. It is used as the tin replenisher in alkaline tin and tin alloy plating baths. REAXIS® E140 also finds use in esterfications. voir moins | |
| REAXIS® E140P | Reaxis Inc. | REAXIS® E140P is an exceptionally pure grade of potassium stannate that is approved for use in applications where the tightest specifications must be met, such as in formulations for Hydrogen Peroxide stabilization. It is manufactured by a proprietary dir...voir plus REAXIS® E140P is an exceptionally pure grade of potassium stannate that is approved for use in applications where the tightest specifications must be met, such as in formulations for Hydrogen Peroxide stabilization. It is manufactured by a proprietary direct process which yields the purest product available anywhere. REAXIS® E140P also finds use in esterfications. voir moins | |
| REAXIS® E144 | Reaxis Inc. | REAXIS® E144 is a fast dissolving alkaline tin salt manufactured by a proprietary direct process that yields consistently high purity crystal. It is used as the tin replenisher in alkaline electroplating of pure tin and its alloys. It is also used in imme...voir plus REAXIS® E144 is a fast dissolving alkaline tin salt manufactured by a proprietary direct process that yields consistently high purity crystal. It is used as the tin replenisher in alkaline electroplating of pure tin and its alloys. It is also used in immersion tin plating baths for cast aluminum alloys and as a chemical intermediate. voir moins | |
| REAXIS® E144P | Reaxis Inc. | REAXIS® E144P is a fast dissolving, alkaline tin salt manufactured by a proprietary direct process that yields consistently high purity crystal. Made of Sodium Stannate, it is used as an ingredient in Hydrogen Peroxide stabilization / stabilizer concentra...voir plus REAXIS® E144P is a fast dissolving, alkaline tin salt manufactured by a proprietary direct process that yields consistently high purity crystal. Made of Sodium Stannate, it is used as an ingredient in Hydrogen Peroxide stabilization / stabilizer concentrates and other applications where highest purity is required. voir moins | |
| REAXIS® E155 | Reaxis Inc. | REAXIS® E155 is a fast dissolving high quality tin salt that is manufactured by a proprietary direct process to insure consistently very low impurity levels. Made of a Stannous Sulfate, it is used as the coloring agent in electrolytic coloring baths for h...voir plus REAXIS® E155 is a fast dissolving high quality tin salt that is manufactured by a proprietary direct process to insure consistently very low impurity levels. Made of a Stannous Sulfate, it is used as the coloring agent in electrolytic coloring baths for hard anodized aluminum extrusions and as the tin source in acid tin electroplating baths. voir moins | |
| REAXIS® E810 | Reaxis Inc. | REAXIS® E810 is a high purity low melting point solid material which is dark blue green in color, that is well suited for use in anti-fouling of certain varnishes or paints. REAXIS® E810 can also be blended for use in the electronics industries. | |
| REAXIS® E825 | Reaxis Inc. | REAXIS® E825 is a blue liquid copper solution produced by a proprietary process from high purity raw materials. It is primarily used in the electoplating industry for metal surface treatment in acid copper and copper alloy plating baths. | |
| REAXIS® MSA70 | Reaxis Inc. | REAXIS® MSA70 is a clear liquid of a very high purity grade of metanesulfonic acid that is used in the production of catalysis, pharmaceuticals, tin plating and tin/lead alloys for electronics. It also finds use in bearing plating processes and immersion ...voir plus REAXIS® MSA70 is a clear liquid of a very high purity grade of metanesulfonic acid that is used in the production of catalysis, pharmaceuticals, tin plating and tin/lead alloys for electronics. It also finds use in bearing plating processes and immersion plating of tin. voir moins | |
| REAXIS® S40AW | Reaxis Inc. | REAXIS® S40AW is a stable aqueous solution of stannous chloride. Its main use is as a powerful reducing agent for removal of metal contaminants. This product is more stable at low temperatures than REAXIS® S50. | |
| REAXIS® S40PW | Reaxis Inc. | REAXIS® S40PW is a stable aqueous solution of stannous chloride. Its main use is as a powerful reducing agent for removal of metal contaminants. The product is more stable at low temperatures than REAXIS® S50. |
