| EPI-REZ™ Resin 7521-WH-57 | Brenntag North America | EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concret...voir plus EPI-REZ™ Resin 7521-WH-57 is a 57% weight solids, non-ionic aqueous dispersion of a modified EPON™ Resin 1001 solid epoxy resin. This low VOC and HAPs-Free1 waterborne epoxy dispersion can be formulated into high-performance coatings for metal and concrete substrates. EPIREZ™ Resin 7521-WH-57 exhibits good compatibility with many water-reducible amine curing agents and is designed for use with either EPIKURE™ Curing Agent 8530-W-75 or EPIKURE™ Curing Agent 6870-W-53. EPI-REZ Resin 7521-WH-57, when combined with EPIKURE™ 8530-W-75, provides a cost-effective, high-performance alternative to traditional waterborne epoxy coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. 1 Hazardous air pollutants as defined by the US Environmental Protection Agency. voir moins | Request Sample |
| EPI-REZ™ Resin 7720-W-50 | Brenntag North America | EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional so...voir plus EPI-REZ Resin 7720-W-50 is a nonionic, waterborne epoxy dispersion based on a modified EPON™ Resin 1001-type solid epoxy resin. It is supplied in water at 50% solids by weight. This dispersion can be formulated to provide the performance of traditional solvent-based epoxy coatings at an ultra-low VOC (<50 g/L). EPI-REZ Resin 7720-W-50 may be used in non-HAP waterborne formulations for metal and concrete substrates. EPI-REZ Resin 7720-W-50 exhibits good compatibility with a water-reducible amine curing agents. A variety of EPIKURE™ curing agents may be used with EPI-REZ Resin 7720-W-50 (e.g., EPIKURE Curing Agent 6870-W-53 and EPIKURE Curing Agent 8530-W75). voir moins | Request Sample |
| EPIKOTE™ Resin 235 | Brenntag North America | EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no dil...voir plus EPIKOTE™ Resin 235 is a low to medium viscosity epoxy resin consisting of a blend of Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and Bisphenol F resin (produced from Bisphenol F and epichlorohydrin). EPIKOTE Resin 235 contains no diluent. Its principal feature, as determined in laboratory tests is that it has excellent crystallization resistance during storage. Furthermore, the addition of reactive diluents, e.g., in the production of formulated compositions, has little to no adverse effect on crystallization resistance. EPIKOTE Resin 235 also provides good pigment-wetting and good resistance to filler settling. (Note: EPIKOTE Resin 235 is one product out of a series. There are other resin blends of similar type that offer the formulator a choice of starting viscosity). voir moins | Request Sample |
| EPIKOTE™ Resin 240 | Brenntag North America | EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono...voir plus EPIKOTE™ Resin 240 is a lower viscosity epoxy resin based on a blend of a Bisphenol A resin (produced from Bisphenol A and epichlorohydrin) and a Bisphenol F resin (produced from Bisphenol F and epichlorohydrin), and containing an added proportion of mono-epoxidized alcohol as a reactive diluent. The resin has lower volatility and lower odor factors which are responsible for its agreeable handling characteristics. EPIKOTE 240 has superior crystallization resistance during storage. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3115-U-80 | Brenntag North America | EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions ...voir plus EPIKURE™ Curing Agent 3115-U-80 is a high molecular weight, reactive polyamide, high viscosity epoxy curing agent based on dimerized fatty acid and polyamines. For ease in formulating and handling, EPIKURE Curing Agent 3115 is also available in solutions of isopropyl alcohol at 73% solids, xylene at 70 solids, and Aromatic 100 at 80% solids. Other solutions may be made available upon request. voir moins | Request Sample |
| EPIKURE™ Curing Agent 3125 | Brenntag North America | EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, pottin...voir plus EPIKURE™ Curing Agent 3125 is a medium viscosity reactive polyamide curing agent, based ondimerized fatty acid and poly-amines. This is a general-purpose curing agent for epoxy resins that is suitable for many uses including solvent-borne coatings, potting, adhesives, caulks and voir moins | Request Sample |
| EPIKURE™ Curing Agent 3393 | Brenntag North America | EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liq...voir plus EPIKURE™ Curing Agent 3393 is a light color, low viscosity, modified cycloaliphatic amine curing agent. It has been specifically designed for use with EPON™ Resin 233 and can be used with standard liquid epoxy resins such as EPON Resin 828 or modified liquid epoxy resins such as EPON Resin 8132. voir moins | Request Sample |
| EPIKURE™ Curing Agent 580 | Brenntag North America | EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop ...voir plus EPIKURE™ Curing Agent 580 is a light color, lower viscosity, modified cycloaliphatic amine curing agent that does not contain intentionally-added benzyl alcohol or nonylphenol. Any potential free BPA content is less than 10 ppm. It can be used to develop flooring formulations with lower indoor air emissions. voir moins | Request Sample |
| EPIKURE™ Curing Agent 6870-W-53 | Brenntag North America | EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy co...voir plus EPIKURE™ Curing Agent 6870-W-53 is a 53% solids, non-ionic aqueous dispersion of a modified polyamine adduct curing agent. This high molecular weight curing agent contains no solvents and is designed to provide the high performance of traditional epoxy coatings in low VOC1, non-HAPS2 waterborne epoxy coatings. Although EPIKURE Curing Agent 6870-W-53 exhibits good compatibility with other epoxy resin dispersions, it is designed for use with EPI-REZ™ Resin 6520-WH-53. 1 VOC is the acronym for volatile organic compound, as defined by the U.S. 40CFR51.100 (s). 2 HAP is the acronym for a hazardous air pollutant, as defined by the U.S. Clean Air Act Amendments of 1990. voir moins | Request Sample |
| EPIKURE™ Curing Agent 8530-W-75 | Brenntag North America | EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to ...voir plus EPIKURE™ Curing Agent 8530-W-75 is a water-reducible polyamine adduct supplied at 75% weight solids in water. It does not contain any organic solvents or acids. This versatile waterborne curing agent can be combined with a solid epoxy resin dispersion to produce ambient-cure metal and concrete coatings. EPIKURE 8530-W-75, when combined with the solid epoxy resin dispersion EPI-REZ™ Resin 7520-WD-52, provides a cost-effective, high-performance alternative to traditional solvent-borne coatings systems. This new system is called the NextGen Epoxy™ Waterborne System. voir moins | Request Sample |
| EPIKURE LY™ Curing Agent 3801 | Brenntag North America | EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy re...voir plus EPIKURE LY™ Curing Agent 3801 is a solvent-free, modified cycloaliphatic amine curing agent designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPON LY™ Resin 1810. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON LY™ Resin 1810 | Brenntag North America | EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curi...voir plus EPON LY™ Resin 1810 is a solvent-free, modified aliphatic epoxy resin designed for lower yellowing, and faster cure coatings for concrete protection. It is recommended to be used with EPIKURE LY™ Curing Agent 3801. This combination of epoxy resin and curing agent is designated as the INFINIUM™ Lower Yellowing Epoxy System. voir moins | Request Sample |
| EPON™ Resin 1001-CX-75 | Brenntag North America | EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resista...voir plus EPON™ Resin 1001-CX-75 is a 75 percent solids solution of an EPON Resin 1001F type epoxy resin in a blend of 65 percent methyl isobutyl ketone, and 35 percent xylene. Systems using EPON Resin 1001-CX-75 can be formulated to have excellent chemical resistance, corrosion resistance, and low color. This resin is used in formulating various room temperature curing industrial maintenance coatings including clears, primers, masonry surfaces, and gloss and semigloss enamels. The base resin is also available in other solvent lineups. voir moins | Request Sample |
| EPON™ Resin 1007F | Brenntag North America | EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007...voir plus EPON™ Resin 1007F is a moderately high molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. This resin is used extensively as a vehicle in high-performance industrial baking finishes. In these coatings, the EPON Resin 1007F is usually reacted with urea formaldehyde or phenol-formaldehyde resins to develop the desired film properties. Coatings of this type exhibit outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. Some of the more important applications for EPON Resin 1007F/ureaformaldehyde or phenol formaldehyde coatings are linings for metal containers, appliance primers, metal furniture finishes, and clear coatings for brass hardware and cosmetic cases. EPON Resin 1007F also finds application in powder coatings and may be used as a partial replacement for other EPON Resins in amine or polyamide cured two package coatings. In addition, this product can be reacted with vegetable oil acids and isocyanate curing agents to produce epoxy resin esters and urethane coatings, respectively. voir moins | Request Sample |
| EPON™ Resin 160 | Brenntag North America | EPON™ Resin 160 is a multifunctional novolac resin. It combines low viscosity and ease of processing with good thermal stability and chemical resistance for use in a number of applications. | Request Sample |
| EPON™ Resin 233 | Brenntag North America | EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with ...voir plus EPON™ Resin 233 is a low viscosity resin based on a mixture of Bisphenol-F epoxy resin and a Bisphenol-A epoxy resin that has been modified to provide easy handling, and superior compatibility (no induction) and excellent concrete adhesion when used with cycloaliphatic amine curing agents. voir moins | Request Sample |
| EPON™ Resin 828 | Brenntag North America | EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obt...voir plus EPON™ Resin 828 is an undiluted clear dysfunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication, and fusion technology. voir moins | Request Sample |
| EPON™ Resin 874-G-90 | Brenntag North America | EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications,...voir plus EPON™ Resin 874-G-90 is a Bisphenol-A-based epoxy resin that has been modified to improve flexibility and reduce solution viscosity. EPON Resin 874-G-90 is supplied at 90% weight solids in normal-butyl acetate solvent (non-HAPS). In coatings applications, EPON Resin 874-G-90 outperforms standard liquid epoxy resin grades (e.g., EPON Resin 828) offering better flexibility and faster dry times while providing comparable performance to solid epoxy resin grades like EPON Resin 1001F. EPON Resin 874-G-90 can be formulated into non-HAPs coatings (<250 g/l VOC) that offer performance equivalent to standard epoxy-polyamide systems. A wide variety of curing agents can be used with EPON 874-G-90 including low viscosity polyamidoamines (e.g. EPIKURE™ Curing Agent 3175), cycloaliphatic amines, and amine adducts. voir moins | Request Sample |
| EPOSIL™ Resin 5550 | Brenntag North America | EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-perform...voir plus EPOSIL™ Resin 5550 is a siloxane-modified hybrid epoxy resin designed to be formulated into protective topcoats. This resin can be cross-linked by amine or amino-silane curing agents. EPOSIL™ Resin 5550 can be used to develop isocyanate-free, high-performance topcoats with the potential to reduce the overall cost of ownership through improved durability and fewer coating layers. voir moins | Request Sample |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...voir plus FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. voir moins | |
| HELOXY™ Modifier 8 | Brenntag North America | HELOXY™ Modifier 8 is an aliphatic monoglycidyl ether containing alkyl chains that are predominately C12 and C14 in length. Its primary use is the viscosity reducing modification of epoxy resin formulations. | Request Sample |
| HP series™ HM080 | Polygroup Inc. | HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| NOVACOM-P™ HFS2100P | Polygroup Inc. | NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EV...voir plus NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EVOH, Nylon and other materials. Primarily markets for these materials are plastics compounding and mixed plastic recycle industries as compatibilizer. voir moins | |
| P. GLYCOL ETHER DPNB | Brenntag North America | P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, texti...voir plus P. GLYCOL ETHER DPNB (Dipropylene glycol n-butyl ether) is a colourless liquid with a mild odour and low volatility. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, agricultural products, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PNB | Brenntag North America | P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaner...voir plus P. GLYCOL ETHER PNB (Propylene glycol n-butyl ether) is a colourless liquid with a characteristic odour. It has low water solubility, good coupling and demonstrates good solvency for coating resins. It is ideal for use in coatings, inks, textiles, cleaners, and adhesives. voir moins | Request Sample |
| P. GLYCOL ETHER PPH | Brenntag North America | P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings,...voir plus P. GLYCOL ETHER PPH (P. Glycol ether PPH) is a slow-evaporating, very hydrophobic glycol ether ideal in coalescing and carrier solvent applications. It has a low odor. Ideal for use in latex coalescent in water-based architectural and industrial coatings, carrier solvent for textile dyes, solvent for inks in ball point and felt tip pens, stamp pads, and textile printing pastes, paint removers, coalescent for latex adhesives, and is useful in the formulation of homogeneous, stable metalworking fluids. voir moins | Request Sample |
| PROPOLDER™ MPP2010 | Polygroup Inc. | PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2020 | Polygroup Inc. | PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2040 | Polygroup Inc. | PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2060 | Polygroup Inc. | PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2080 | Polygroup Inc. | PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2100 | Polygroup Inc. | PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| Research Curing Agent RSC-4628 | Brenntag North America | Research Curing Agent RSC-4628 is a light color, very low viscosity, amino silane curing agent that is used with EPOSIL™ Resin 5550 for the development of lower yellowing protective topcoats. | Request Sample |
| SONGLIGHT® 1230 | Songwon International AG | SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and u...voir plus SONGLIGHT® 1230 is a liquid hindered amine light stabilizer (HALS) of NOR type. It is an effective light stabilizer in acrylics, polyurethanes, sealants, adhesives, rubbers, impact modified polyolefin blends (TPE, TPO), vinyl polymers (PVC, PVB), PP and unsaturated polyesters. Can be used in automotive and industrial coating, decorative paint and wood stains or varnishes. voir moins | |
| SONGNOX® 1010 | Songwon International AG | SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effe...voir plus SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effect in combination with SONGNOX® 1680 and other secondary antioxidants. It can also be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use voir moins | |
| SONGNOX® 1024 | Songwon International AG | SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (...voir plus SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (particularly SONGNOX® 1010) to achieve synergistic performance. voir moins | |
| SONGNOX® 1035 | Songwon International AG | SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility ...voir plus SONGNOX® 1035 provides both primary and secondary antioxidant protection for organic polymers. It is compatible with a wide range of organic substrates and can be used with a broad range of other stabilizers for optimum performance. It has low volatility and provides long-term heat stability. voir moins | |
| SONGNOX® 1076 | Songwon International AG | SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used wi...voir plus SONGNOX® 1076 is an effective antioxidant for use in polymer processing - reducing viscosity change and gel formation. It provides long term heat stability, protecting physical properties during storage and use of end-product. SONGNOX® 1076 can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. voir moins | |
| SONGNOX® 1098 | Songwon International AG | SONGNOX® 1098 is hghly effective especially in wire and cable applications used as primary insulation of PP, HDPE, LDPE and other elastomers. Is an antioxidant for Polyamide fibers, molded articles and films. Provides extraction resistance. | |
| SONGNOX® 117B | Songwon International AG | SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term h...voir plus SONGNOX® 117B blend of SONGNOX® 1076, a primary hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent Melt Flow and Color protection during processing of Polyolefins. SONGNOX® 117B provides long term heat stability - protects physical properties during storage and in the end use application. It is also useful for stabilization of Polycarbonates, ABS, and Polyesters. voir moins | |
| SONGNOX® 11B | Songwon International AG | SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides...voir plus SONGNOX® 11B is a blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. provides excellent melt flow and color protection during processing of Polyolefins. It provides long term heat stability - protects physical properties during storage and in the end use application. SONGNOX® 11B can also useful for stabilization of Polycarbonate, ABS, and Polyesters. voir moins | |
| SONGNOX® 1290 | Songwon International AG | SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polysty...voir plus SONGNOX® 1290 is a primary antioxidant for organic polymers. It provides long term heat stability - protects physical properties during storage and use of end-product. SONGNOX® 1290 is highly effective in plastics including crystal and high impact Polystyrene, ABS terpolymer, PVC, Polyamides, Polyurethanes, Elastomers, Adhesives, Rubbers such as EPDM, SBS and rubber blends with Polyolefins, and natural and synthetic tackifier resins. voir moins | |
| SONGNOX® 1330 | Songwon International AG | SONGNOX® 1330 is a primary antioxidant for organic polymers. It offers extraction resistant in water-quenched PP film lines. SONGNOX® 1330 exhibits high performance in controlling degradation of polyolefins. It is not absorbed by filler in polyolefins. | |
| SONGNOX® 1520 LQ | Songwon International AG | SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplasti...voir plus SONGNOX® 1520 LQ is a liquid phenolic antioxidant for organic substrates such as elastomers, plastics, adhesives, sealants, oil and lubricants. It is also effective thermo-oxidative stabilizer of solution polymerized, emulsion polymerized and thermoplastic elastomers. voir moins | |
| SONGNOX® 1680 | Songwon International AG | SONGNOX® 1680 is a secondary antioxidant for organic polymers. Applications include polyolefins, polycarbonate, polyester, and styrenics. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. | |
| SONGNOX® 1790 | Songwon International AG | SONGNOX® 1790 is a primary antioxidant for organic polymers. It offers high performance for sterically hindered phenolic antioxidants. It can be used for polyolefin, polyurethane, polystyrene, polyester and polyamide fiber. | |
| SONGNOX® 2450 | Songwon International AG | SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. I...voir plus SONGNOX® 2450 is a primary antioxidant for organic polymers. It is a high performance sterically hindered phenolic antioxidant that protects the polymer against thermo-oxidative degradation during the manufacturing processes and in end-use applications. It is an effective antioxidant for styrenics, synthetic rubbers, POM homo & copolymer, polyurethanes, polyamides, polyesters, MBS and PVC. It can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. voir moins | |
| SONGNOX® 4120 | Songwon International AG | SONGNOX® 4120 is a secondary antioxidant for organic polymers. It is a sulfur containing antioxidant with high molecular weight, and the characteristics of low volatility and high performance. SONGNOX® 4120 performs as a better synergist with phenolic ant...voir plus SONGNOX® 4120 is a secondary antioxidant for organic polymers. It is a sulfur containing antioxidant with high molecular weight, and the characteristics of low volatility and high performance. SONGNOX® 4120 performs as a better synergist with phenolic antioxidant than SONGNOX® DLTDP & DSTDP and etc. It is effective in polyolefins and has high heat resistance and low leaching properties. voir moins | |
| SONGNOX® 4425 | Songwon International AG | SONGNOX® 4425 is a primary antioxidant for organic polymers. It is a non-discoloring antioxidant with a wide range of applications for thermoplastics and adhesives. SONGNOX® 4425 is highly effective in Polyamide and tire cod and high impact Polystyrene, A...voir plus SONGNOX® 4425 is a primary antioxidant for organic polymers. It is a non-discoloring antioxidant with a wide range of applications for thermoplastics and adhesives. SONGNOX® 4425 is highly effective in Polyamide and tire cod and high impact Polystyrene, ABS, Polyesters, most elastomers and rubbers. voir moins | |
| SONGNOX® 5650 | Songwon International AG | SONGNOX® 5650 is a high molecular weight, non-discoloring, non-staining, multifunctional phenolic antioxidant. It is an effective antioxidant for elastomers including BR, Polyisoprene, SBR, NBR, carboxylated SBR and SBS, SIS. SONGNOX® 5650 is used in adhe...voir plus SONGNOX® 5650 is a high molecular weight, non-discoloring, non-staining, multifunctional phenolic antioxidant. It is an effective antioxidant for elastomers including BR, Polyisoprene, SBR, NBR, carboxylated SBR and SBS, SIS. SONGNOX® 5650 is used in adhesives, tackifier resins, EPDM, ABS, impact polystyrenes, polyamides and polyolefins. voir moins | |
| SONGNOX® 611B | Songwon International AG | SONGNOX® 611B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefi...voir plus SONGNOX® 611B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefins. 611B also provides long term heat stability. It is also useful for stabilization of Polycarbonate, ABS, and Polyesters. voir moins | |
| SONGNOX® 621B | Songwon International AG | SONGNOX® 621B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefi...voir plus SONGNOX® 621B is the physical blend of SONGNOX® 1010, a primary high molecular weight hindered phenolic antioxidant, with SONGNOX® 6260, a secondary phosphite antioxidant. It provides excellent melt flow and color protection during processing of Polyolefins. 621B also provides long term heat stability. It is also useful for stabilization of Polycarbonate, ABS, and Polyesters. voir moins | |
| SONGNOX® 6260 | Songwon International AG | SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and st...voir plus SONGNOX® 6260 is a secondary high performance antioxidant for organic polymers. It can be used with benzotriazoles and HALS for thermal and light stabilization in out door use. Applications include polyolefins, elastomers, polycarbonate, polyester, and styrenics. voir moins | |
| SONGNOX® 921B | Songwon International AG | SONGNOX® 921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term therma...voir plus SONGNOX® 921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term thermal stability. Can be used in Polyolefins, Polycarbonates, ABS, Polyesters. 921B can also be used in combination with polymeric UVAs and HALS. voir moins | |
| SONGNOX® 931B | Songwon International AG | SONGNOX® 931B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term therma...voir plus SONGNOX® 931B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provide excellent protection in Polyolefins, and excellent processing and long term thermal stability. Can be used in Polyolefins, Polycarbonates, ABS, Polyesters. 931B can also be used in combination with polymeric UVAs and HALS. voir moins | |
| SONGNOX® DLTDP | Songwon International AG | SONGNOX® DLTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DLTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It can be used as ...voir plus SONGNOX® DLTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DLTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It can be used as a synergist in combination with phenolic antioxidants for enhanced aging and light stability. voir moins | |
| SONGNOX® DMTDP | Songwon International AG | SONGNOX® DMTDP is a secondary thio’s ester antioxidant for organic polymers. It can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum products. DMTDP is an efficient stabilizer for polyolefins, particularly PP and HD...voir plus SONGNOX® DMTDP is a secondary thio’s ester antioxidant for organic polymers. It can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum products. DMTDP is an efficient stabilizer for polyolefins, particularly PP and HDPE. It is mainly used in PE, PP, ABS, HIPS, Polyester and polyamide. voir moins | |
| SONGNOX® DSTDP | Songwon International AG | SONGNOX® DSTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. Can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum p...voir plus SONGNOX® DSTDP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. Can be used as an antioxidant for plastics, rubber, synthetic fiber, fat and oils, petroleum products. It can also be used as a synergist in combination with phenolic antioxidants to enhance aging and light stability. voir moins | |
| SONGNOX® DTDTP | Songwon International AG | SONGNOX® DTDTP is a secondary thio’s ester antioxidant for organic polymers. It decomposes and neutralizes hydroperoxides, formed by auto-oxidation of polymers. DTDTP is an efficient stabilizer for polyolefins, particularly PP and HDPE. | |
| SONGNOX® OPS921B | Songwon International AG | SONGNOX® OPS921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent protection in Polyolefins and excellent processing and long term the...voir plus SONGNOX® OPS921B is the physical blend of SONGNOX® 1790, high molecular weight hindered phenolic antioxidant, with SONGNOX® 1680, a secondary phosphite antioxidant. It provides excellent protection in Polyolefins and excellent processing and long term thermal stability. OPS921B can be used in Polyolefins, Polycarbonates, ABS, Polyesters. voir moins | |
| SONGNOX® PQ | Songwon International AG | SONGNOX® PQ is a high performance secondary antioxidant for organic polymers. It is an effective in stabilization of polyolefins, elastomers, engineering plastic and adhesives. PQ has excellent color stability during compounding, fabrication and end-use, ...voir plus SONGNOX® PQ is a high performance secondary antioxidant for organic polymers. It is an effective in stabilization of polyolefins, elastomers, engineering plastic and adhesives. PQ has excellent color stability during compounding, fabrication and end-use, and improvement in the light stability. It is highly effective processing stabilizer and excellent discoloration inhibitor for organic polymers. voir moins | |
| SONGSORB® 1000 | Songwon International AG | SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to ...voir plus SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to a wide range of polymers. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use. voir moins | |
| SONGSORB® 2340 | Songwon International AG | SONGSORB® 2340 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It is particularly suitable for applica...voir plus SONGSORB® 2340 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It is particularly suitable for application characterized by high surface area, such as films and fibers. Applications include PET fibers and films, Polycarbonate, POM, Nylon, Polyolefins, TPE, TPO, and coatings. voir moins | |
| SONGSORB® 2908 | Songwon International AG | SONGSORB® 2908 provides antioxidant activity both during thermal processing and in moderate elevated temperatures due to radical scavenging mechanism. It exhibits excellent compatibility, low color contribution, low volatility and low toxicity. SONGSORB® ...voir plus SONGSORB® 2908 provides antioxidant activity both during thermal processing and in moderate elevated temperatures due to radical scavenging mechanism. It exhibits excellent compatibility, low color contribution, low volatility and low toxicity. SONGSORB® 2908 is an excellent ultraviolet light stabilizer for olefins, particularly pigmented opaque formulations, for applications such as pipes, drums, sheeting, marine, and garden. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use - synergizies well with UV absorbers and antioxidants which function as hydroperoxide decomposers. voir moins | |
| SONGSORB® 3260 | Songwon International AG | SONGSORB® 3260 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It can be used in combination with phen...voir plus SONGSORB® 3260 is a strong absorber of ultraviolet radiation in the 300~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use. voir moins | |
| SONGSORB® 3280 | Songwon International AG | SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low i...voir plus SONGSORB® 3280 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. It features strong UV absorption, low initial color, good solubility in plasticizers and monomers, moderately low volatility, and excellent compatibility in a wide variety of substrates. SONGSORB® 3280 is recommended for use in polyolefins, PVC, styrene homo and copolymers, ABS, acrylic polymers, unsaturated polyesters, thermoplastic urethanes, moisture cured polyurethanes, polyacetals, polyvinylbutyral, two component epoxies and urethanes, oil alkyds and thermosetting acrylic enamels. voir moins | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| Viplex 200 | Atmos Technologies | Viplex 200 is a general purpose extender or secondary plasticizer with a moderate viscosity used in flexible PVC, polyurethane elastomers, rubber, and epoxies. Applications include concrete crack repair and more. | |
| Viplex 222 | Atmos Technologies | Viplex 222 is a general purpose PU extender with moderate viscosity. Applications include Carpet rebond adhesive. | |
| Viplex 222HV | Atmos Technologies | Viplex 222HV is a general-purpose high viscosity extender with excellent compatibility with Polyurethane systems. High loading capability. Applications include Carpet rebond adhesive. | |
| Viplex 223.5 | Atmos Technologies | Viplex 223.5 is a general purpose extender for higher-loading polyurethane systems and PVC plastisols. | |
| Viplex 525-24 | Atmos Technologies | Viplex 525-24 is a general purpose extender with good water resistance required in Polyurethane and Epoxy systems. Applications include Coatings, PVC Plastisol, and Sealants. | |
| Viplex 530A | Atmos Technologies | Viplex 530A is a general-purpose PU extender with moderate viscosity. Applications include Tire Fill, Waterproofing, and Roofing sealant. | |
| Viplex LS | Atmos Technologies | Viplex LS is a low-viscosity diluent with excellent compatibility in Polyurethane and Epoxy systems. Applications include Coatings, PVC Plastisols, and Carbon Black. | |
| Vycel EF | Atmos Technologies | Vycel EF is a viscosity-reducing diluent with very low color and a low odor level for Polyurethane and Epoxy systems. Vycel EF is very hydrophobic and is completely compatible with Epoxy, Phenolics, MDI, TDI and their Prepolymers. Applications include Coa...voir plus Vycel EF is a viscosity-reducing diluent with very low color and a low odor level for Polyurethane and Epoxy systems. Vycel EF is very hydrophobic and is completely compatible with Epoxy, Phenolics, MDI, TDI and their Prepolymers. Applications include Coatings, Adhesives, Sealants, Pigments, PU Foam. voir moins | |
| Vycel U | Atmos Technologies | Vycel U is a low-viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester, and Phenolic resin systems. Applications include Coatings, Adhesives, Sealants, Electrical potting, PU Foam. | |
| Vycel U-3000 | Atmos Technologies | Vycel U-3000 is a low-viscosity diluent, low-odor, and water-white extender. Applications include Coatings, Adhesives, Sealants, and concrete crack repair. | |
| Vycel U-V | Atmos Technologies | Vycel U-V is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems. Vanilla odorant added to mitigate petroleum smell. Applications include Coatings, ...voir plus Vycel U-V is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems. Vanilla odorant added to mitigate petroleum smell. Applications include Coatings, Adhesives, Sealants, Electrical potting, PU Foam. voir moins |
