| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514...voir plus DAPRO® FX 514 is an environmentally friendly waterborne coalescing agent prepared from renewable resources. It is specifically designed for low VOC water based coatings systems, in particular adhesives. This product is odorless and VOC-free. DAPRO® FX 514 shows excellent film formation, scrub resistance, improved gloss and open-time. voir moins | |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 is a silicone modified liquid defoamer for use in solvent systems. It has outstanding defoaming properties in a variety of solvent systems. DAPRO® NA 1622 is easy to incorporate in solventborne coatings and inks. | |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...voir plus DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. voir moins | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...voir plus DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. voir moins | |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks. | |
| DDSA | Univar Solutions | DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fu...voir plus DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fuels and lubricating oils. voir moins | Request Sample |
| Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...voir plus Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. voir moins | Request Sample |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| DMAMP-80 | Univar Solutions | DMAMP-80 is one of the strongest tertiary amino alcohols commercially available, which can be used in water based systems to provide exceptional clarity, wettability and stability. | Request Sample |
| Dow Corning® 1250 Surfactant | Univar Solutions | Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthe...voir plus Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthetic leathers. voir moins | Request Sample |
| Dow Corning® 26 Additive | Univar Solutions | Dow Corning® 26 Additive is a leveling and wetting agent for solvent-based coatings and inks. It is a low-viscosity, 100% silicone fluid containing no solvents. | Request Sample |
| Dow Corning® 550 Fluid | Univar Solutions | Dow Corning® 550 Fluid is a trimethyl-terminated dimethyl, phenylmethyl siloxane fluid. It offers excellent heat transfer characteristics, good compressibility, and good oxidation and thermal stability. | Request Sample |
| DOWSIL™ 100F Additive | Univar Solutions | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...voir plus Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. voir moins | Request Sample |
| DOWSIL™ 11 Additive | Univar Solutions | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...voir plus Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. voir moins | Request Sample |
| DOWSIL™ 163 Additive | Univar Solutions | Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% activ...voir plus Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. voir moins | Request Sample |
| DOWSIL™ 205SL Additive | Univar Solutions | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...voir plus Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. voir moins | Request Sample |
| DOWSIL™ 29 Additive | Univar Solutions | Dow Corning® 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, r...voir plus Dow Corning® 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. voir moins | Request Sample |
| DOWSIL™ 3 Additive | Univar Solutions | Dow Corning® 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. | Request Sample |
| DOWSIL™ 401LS Additive | Univar Solutions | Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat f...voir plus Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. voir moins | Request Sample |
| DOWSIL™ 402LS Additive | Univar Solutions | Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clea...voir plus Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. voir moins | Request Sample |
| DOWSIL™ 500W Additive | Univar Solutions | Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...voir plus Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | Request Sample |
| DOWSIL™ 501W Additive | Univar Solutions | Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...voir plus Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | Request Sample |
| DOWSIL™ 502W Additive | Univar Solutions | Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...voir plus Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | Request Sample |
| DOWSIL™ 56 Additive | Univar Solutions | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...voir plus Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. voir moins | Request Sample |
| DOWSIL™ 57 Additive | Univar Solutions | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...voir plus Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. voir moins | Request Sample |
| DOWSIL™ 67 Additive | Univar Solutions | Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effec...voir plus Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. voir moins | Request Sample |
| DOWSIL™ 68 Additive | Univar Solutions | Dow Corning® 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | Request Sample |
| DOWSIL™ 7 Additive | Univar Solutions | Dow Corning® 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system ...voir plus Dow Corning® 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. voir moins | Request Sample |
| DOWSIL™ 71 Additive | Univar Solutions | Dow Corning® 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearan...voir plus Dow Corning® 71 Additive is a polymeric silicone foam control agent. It provides effective foam control in a variety of waterborne coatings. This product is particularly suited for waterborne inks balancing effective foam control and good surface appearance. voir moins | Request Sample |
| DOWSIL™ 74 Additive | Univar Solutions | Dow Corning® 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear s...voir plus Dow Corning® 74 Additive is a polymeric silicone foam control agent. It shows good compatibility in waterborne coating and ink systems and has a low tendency to cause surface defects. This product is particularly suited for applications where high shear stability and ease of incorporation are needed. voir moins | Request Sample |
| DOWSIL™ 8590 Additive | Univar Solutions | Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emuls...voir plus Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. voir moins | Request Sample |
| Eastman Optifilm™ Enhancer 400 | Univar Solutions | Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman ...voir plus Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman Optifilm™ enhancer 400 delivers excellent film integrity, touch-up properties, and scrub resistance, even at the lowest VOCs content. Paints prepared with Eastman Optifilm™ enhancer 400 have also demonstrated good exterior durability after one year exposure. voir moins | Request Sample |
| Eastman Texanol™ Ester Alcohol | Univar Solutions | Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film inte...voir plus Eastman Texanol™ Ester Alcohol is the premier coalescent for latex paints. It performs well in all types of latex paints, in a variety of weather conditions, and over substrates with different levels of porosity. It provides the highest level of film integrity at low levels of coalescent, enhancing the performance properties of the paint including low temperature coalescence, touch-up, scrub resistance, washability, color development, thermal flexibility, and resistance to mudcracking. Eastman Texanol™ ester alcohol also enhances thickening efficiency when used with associative thickeners. voir moins | Request Sample |
| ECA 29 Epoxy Curing Agent | Univar Solutions | ECA 29 Epoxy Curing Agent is a mixture of aliphatic polyamines derived from ethylenediamine, useful as an epoxy curing agent in applications where higher glass transition temperature and reasonably fast reactivity are needed with longer pot life. | Request Sample |
| Genapol® PF 40 | Univar Solutions | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...voir plus Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. voir moins | Request Sample |
| Genapol® PF 80 Powder | Univar Solutions | Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to ac...voir plus Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This product has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 80 powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol® PF 80 powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. voir moins | Request Sample |
| Genapol® X 100 | Univar Solutions | Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...voir plus Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. voir moins | Request Sample |
| GEROPON® 99 | Univar Solutions | GEROPON® 99 is a highly efficient, low VOC, anionic surfactant. It’s high flash point and low odor make this product easy to handle. GEROPON® 99 improves flow and leveling of semi and gloss paints while reducing or eliminating crawling and cut-through ove...voir plus GEROPON® 99 is a highly efficient, low VOC, anionic surfactant. It’s high flash point and low odor make this product easy to handle. GEROPON® 99 improves flow and leveling of semi and gloss paints while reducing or eliminating crawling and cut-through over greasy and glossy surfaces. It can also be used as a re-wetting agent in board or adhesives for quick strike. voir moins | Request Sample |
| Glyoxal 40% | Univar Solutions | Glyoxal 40% is a colorless to yellow liquid, with a faint odor. It is also miscible with water. It is an intermediate used in the production of adhesives, cross linkers, paper resins, pharmaceuticals, sulfur scavengers, and textile resins. | Request Sample |
| Hostaphat® 1322 | Univar Solutions | Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rol...voir plus Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rolling oils. voir moins | Request Sample |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| LAPONITE® RD | Univar Solutions | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...voir plus LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. voir moins | Request Sample |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...voir plus LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. voir moins | Request Sample |
| LUDOX® CL | Univar Solutions | LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that impa...voir plus LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that imparts a positive charge. LUDOX® CL Colloidal Silica may be used in various coating applications in which the formulation requires acidic pH or cationic polymers or surfactants. The positively charged particles may be used as surface treatments to paper and fibrous materials. LUDOX® CL Colloidal Silica can also be used as a high temperature binder. voir moins | Request Sample |
| LUDOX® CL-P | Univar Solutions | LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...voir plus LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX® CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. voir moins | Request Sample |
| LUDOX® CL-X | Univar Solutions | LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...voir plus LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. voir moins | Request Sample |
| LUDOX® TMA | Univar Solutions | LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloida...voir plus LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloidal silica – ethyl silicate binders for precision investment casting. It may also be used in applications in which sodium or alkaline components are undesirable, such as catalysts or in formulations containing polar organic solvents. voir moins | Request Sample |
| M-P-A® 2000 X | Elementis | M-P-A® 2000 X is an easily incorporated, highly efficient organic solventborne antisettling and sag control additive supplied as a pourable dispersion in xylene. | |
| M-P-A® 3000 MS | Elementis | A liquid, 20% solids antisettling additive in Mineral Spirits. This highly effective, pourable additive is best suited to aliphatic solvent based systems where pigment suspension is not totally satisfactory when using only viscosity- building rheological ...voir plus A liquid, 20% solids antisettling additive in Mineral Spirits. This highly effective, pourable additive is best suited to aliphatic solvent based systems where pigment suspension is not totally satisfactory when using only viscosity- building rheological additives. M-P-A 3000 MS also effectively provides sag resistance in certain systems. voir moins | |
| M-P-A® 4020 BA | Elementis | M-P-A® 4020 BA is a solventborne/colorant HAPS-free and moisture free additive designed for highly efficient control of pigment settling in HAPS-free industrial finishes. | |
| M-P-A® 4020 BA2 | Elementis | M-P-A® 4020 BA2 is a HAPS-free and moisture free soft paste additive is designed for highly efficient control of pigment settling in HAPS-free industrial finishes. M-P-A 4020 BA 2 additive handles easily and disperses rapidly. It is organic in nature, hav...voir plus M-P-A® 4020 BA2 is a HAPS-free and moisture free soft paste additive is designed for highly efficient control of pigment settling in HAPS-free industrial finishes. M-P-A 4020 BA 2 additive handles easily and disperses rapidly. It is organic in nature, having a nominal non-volatile content of 20%. voir moins | |
| M-P-A® 4020 X | Elementis | M-P-A® 4020 X is a solventborne/colorant, highly stable, moisture-free, high efficiency, pourable antisettling agent offering the effectiveness of the M-P-A 1078 X additive in an easier to handle form. Use of this product as an additive in industrial fini...voir plus M-P-A® 4020 X is a solventborne/colorant, highly stable, moisture-free, high efficiency, pourable antisettling agent offering the effectiveness of the M-P-A 1078 X additive in an easier to handle form. Use of this product as an additive in industrial finishes yields superior control of pigment settling at lower additive levels than for conventional antisettling agents. It may be directly substituted on an equal solids basis for either M-P-A® 60X or M-P-A® 2000X. voir moins | |
| M-P-A® 60 MS | Elementis | M-P-A® 60 MS is a highly efficient organic solventborne/colorant antisettling agent and sag control additive supplied as a soft paste dispersed in mineral spirit. | |
| M-P-A® 60 X | Elementis | M-P-A® 60 X is a solventborne/colorant paste, anti-settling agent for industrial finishes. | |
| Methyl Formate | Univar Solutions | Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specific...voir plus Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specifically in polyurethane foams. It is also used as a chemical intermediate and solvent in the production of fine chemicals, fumigants, and insecticides. voir moins | Request Sample |
| NALZIN® FA 179 | Elementis | NALZIN® FA 179 is a recommended as a corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for application as an inhibitor against the formation of in-can corrosion. Emulsified in water...voir plus NALZIN® FA 179 is a recommended as a corrosion inhibitor for waterborne paint systems to counteract the formation of flash-rust. The product is also recommended for application as an inhibitor against the formation of in-can corrosion. Emulsified in water, NALZIN® FA 179 can also be used as a temporary rust inhibitor. voir moins | |
| NALZIN® FA-379 | Elementis | NALZIN® FA-379 is a very effective liquid corrosion inhibitor for waterborne coatings; it counteracts both flash and early rusting. The product is nitrite-free but still performs excellently as a permanent corrosion inhibitor in coatings. | |
| NUOSPERSE® 15 | Elementis | NUOSPERSE® 15 is a multifunctional pigment dispersing additive/vehicle that has been developed for high performance solventborne coatings. | |
| NUOSPERSE® 2000 | Elementis | NUOSPERSE® 2000 is a waterborne liquid carrier/humectant for use in VOC- compliant colorants and pigment dispersions. | |
| NUOSPERSE® 2006 | Elementis | NUOSPERSE® 2006 is an organic-solvent free, anionic, waterborne surface active compound which can be used as a wetting agent in aqueous as well as organic- solvent borne systems. It has excellent substrate wetting properties. | |
| NUOSPERSE® 2008 | Elementis | NUOSPERSE® 2008 is a unique solvent free/NO- VOC waterborne/solventborne pigment dispersing agent specifically used in NO-VOC paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as...voir plus NUOSPERSE® 2008 is a unique solvent free/NO- VOC waterborne/solventborne pigment dispersing agent specifically used in NO-VOC paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as well as organic solvent based coatings and inks. voir moins | |
| NUOSPERSE® 657 NA | Elementis | NUOSPERSE® 657 NA is a highly effective in various types of organic and inorganic pigments. It is recommended for use in a wide range of high- performance, solvent-borne coatings. The product can also be used in vinyl applications. | |
| NUOSPERSE® 9100 | Elementis | NUOSPERSE® 9100 is a powder solventborne dispersing agent designed for high solids and UV systems. It is soluble in a wide variety of solvents, monomers, reactive diluents and compatible with most non-aqueous systems. It can be used as the sole dispersing...voir plus NUOSPERSE® 9100 is a powder solventborne dispersing agent designed for high solids and UV systems. It is soluble in a wide variety of solvents, monomers, reactive diluents and compatible with most non-aqueous systems. It can be used as the sole dispersing resin to prepare highly concentrated dispersions of both organic and inorganic pigments. voir moins | |
| NUOSPERSE® FA 115 | Elementis | NUOSPERSE® FA 115 is a waterborne additive to improve the incorporation of universal tinting pastes into the base dispersion paint. | |
| NUOSPERSE® FA 182 | Elementis | NUOSPERSE® FA 182 is an anionic waterborne/solventborne surface active compound which can be used as a wetting agent in dispersion paints. The product also reduces the resistance of electrostatic spray paints. | |
| NUOSPERSE® FA 196 | Elementis | NUOSPERSE® FA 196 is a highly concentrated liquid pigment waterborne/solventborne/colorant dispersing agent for application in organic solvent-borne systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for carbon blac...voir plus NUOSPERSE® FA 196 is a highly concentrated liquid pigment waterborne/solventborne/colorant dispersing agent for application in organic solvent-borne systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for carbon black, for thermoplastic acrylic systems and as an auxiliary product to improve the action of universal tinting pastes in basic alkyd paints. voir moins | |
| NUOSPERSE® FK 329 | Elementis | NUOSPERSE® FK 329 is a liquid solventborne corrosion inhibitor for non-aqueous systems. This product is also recommended as a cationic pigment dispersant. | |
| NUOSPERSE FN® 1566 | Elementis | NUOSPERSE FN® 1566 is a nonyl phenol ethoxylate waterborne surfactant. In general these ethoxylated compounds are resistant to acids and alkali, as well as weak oxidation and reduction agents. They are also totally compatible with both anionic and cationi...voir plus NUOSPERSE FN® 1566 is a nonyl phenol ethoxylate waterborne surfactant. In general these ethoxylated compounds are resistant to acids and alkali, as well as weak oxidation and reduction agents. They are also totally compatible with both anionic and cationic compounds. voir moins | |
| NUOSPERSE® FN 211 | Elementis | NUOSPERSE® FN 211 is a nonionic pigment wetting and dispersing agent primarily for use in waterborne coating formulations. This product is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. | |
| NUOSPERSE® FN 260 | Elementis | NUOSPERSE® FN 260 is a unique, waterborne, labelling-free nonionic wetting agent and emulsifier. | |
| NUOSPERSE® FN 265 | Elementis | NUOSPERSE® FN 265 is an alkylphenol-free, nonionic waterborne wetting agent and emulsifier. | |
| NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 is a nonionic polymeric wetting and dispersing agent for use in waterborne coating and ink formulations and pigment pastes. This product shows outstanding pigment wetting and stabilizing properties. | |
| NUOSPERSE® FX 504 | Elementis | NUOSPERSE® FX 504 is a low-foaming, polymeric waterborne pigment dispersing agent that works effectively for many hydrophilic pigments and extenders that are used in aqueous coatings. | |
| NUOSPERSE® FX 600 | Elementis | NUOSPERSE® FX 600 is a highly effective pigment dispersing agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of or...voir plus NUOSPERSE® FX 600 is a highly effective pigment dispersing agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of organic solvents. voir moins | |
| NUOSPERSE® FX 605 | Elementis | NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even af...voir plus NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even after extended storage of the coating system. voir moins | |
| NUOSPERSE® W-22 | Elementis | NUOSPERSE® W-22 is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent flocculation and viscosity drift. | |
| NUOSPERSE® W-28 | Elementis | NUOSPERSE® W-28 is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent flocculation and viscosity drift. | |
| NUOSPERSE® W-30 | Elementis | NUOSPERSE® W-30 is an environmentally friendly waterborne dispersing agent that can be used with all types of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in water...voir plus NUOSPERSE® W-30 is an environmentally friendly waterborne dispersing agent that can be used with all types of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent re-flocculation and viscosity drift. voir moins | |
| NUOSPERSE® W-33 | Elementis | NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the f...voir plus NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent reflocculation and viscosity drift. NUOSPERSE® W-33 is low VOC and free of Alkylphenolethoxylates. voir moins | |
| NUOSPERSE® W-39 | Elementis | NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments...voir plus NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent re-flocculation and viscosity drift. voir moins | |
| NUOSPERSE® XL-1/80 | Elementis | NUOSPERSE® XL-1/80 is solventborne/colorant, and is designed for use in manufacturing of glycol-free universal colorants for in-plant and machine tinting. This product is also used as an additive to improve compatibility of colorant/paint systems. | |
| OPTIGEL® CK | Univar Solutions | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...voir plus OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. voir moins | Request Sample |
| OPTIGEL® WX | Univar Solutions | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...voir plus OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. voir moins | Request Sample |
| OROTAN™ 731 DP | Univar Solutions | OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosi...voir plus OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosion resistance for flat primers, low VOC paints, interior and exterior flat, sheen, and semi-gloss paints, and glossy topcoats. It lends to improved dispersing, stability, and film properties in a broad array of coating systems. voir moins | Request Sample |
| OXFILM 351 | Univar Solutions | OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required...voir plus OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required to obtain the desired final film hardness. OXFILM 351 is not designed to be a drop-in replacement for traditional ester alcohol or glycol ether coalescents. It is intended for next generation low odor, low VOC coatings. Use of a slightly harder polymer is recommended to compensate for its permanence and plasticizing effect in the dried film. Low odor, extremely low 28 day emission results are achievable with OXFILM 351 when properly formulated. voir moins | Request Sample |
| OZ WHITE™ | Univar Solutions | OZ WHITE™ is a dry ground limestone marble with a very coarse particle size that is controlled between 6 mesh and 14 mesh. Textured coatings and water treatment are the main applications. OZ WHITE™ is suited for use in textured coatings and stuccos based...voir plus OZ WHITE™ is a dry ground limestone marble with a very coarse particle size that is controlled between 6 mesh and 14 mesh. Textured coatings and water treatment are the main applications. OZ WHITE™ is suited for use in textured coatings and stuccos based on cement of acrylics, acid neutralization, and water filtration systems. voir moins | Request Sample |
| PB10 | Univar Solutions | PB10 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...voir plus PB10 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. voir moins | Request Sample |
| PB122 | Univar Solutions | PB122 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...voir plus PB122 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. voir moins | Request Sample |
| PB124 | Univar Solutions | PB124 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...voir plus PB124 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. voir moins | Request Sample |
| PB128 | Univar Solutions | PB128 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...voir plus PB128 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. voir moins | Request Sample |
