| Airase® 4500 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils,...voir plus Airase® 4500 Defoamer is a proprietary organic oil defoamer designed to control and typically eliminate foam, pinholes and entrapped air in waterbased inks, adhesives and coatings without generating surface defects. It does not contain added mineral oils, hazardous air pollutants (HAPs), or alkyl phenol ethoxylates (APEs). voir moins | |
| Airase® 5700 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no adde...voir plus Airase® 5700 Defoamer is a structured siloxane defoamer line (SSDL) defoamer - a member of aline of products that spans the application space from strong defoaming to high compatibility. Airase® 5700 Defoamer is a formulated product that contains no added solvent, HAPs, or alkylphenol ethoxylates. This siloxane-based defoamer was developed for use in a wide range of water-based applications. Airase® 5700 Defoamer is formulated for incorporation in the let-down of a coating or ink. Airase® 5700 Defoamer can provide an excellent balance of effective defoaming and film compatibility. voir moins | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...voir plus Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. voir moins | |
| Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. voir moins | |
| Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...voir plus Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. voir moins | |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| DYNOL™ 604 Surfactant | Evonik Operations GmbH, BL Interface & Performance | DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...voir plus DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. voir moins | |
| Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants ...voir plus Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more. voir moins | |
| Dynol™ 980 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offe...voir plus Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with low foam and excellent compatibility. The characteristics of Dynol™ 980 surfactant enable exceptional performance in waterborne wood coatings and overprint varnishes. This product can also provide good flow and leveling under diverse application conditions. voir moins | |
| ESTISOL 140 | Esti Chem A/S | ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as...voir plus ESTISOL 140 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 195 to 205 °C and can reduce or eliminate VOC content in products. ESTISOL 140 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 150 | Esti Chem A/S | ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as...voir plus ESTISOL 150 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 220 to 225 °C and can reduce or eliminate VOC content in products. ESTISOL 150 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 165 | Esti Chem A/S | ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as...voir plus ESTISOL 165 is a synthetic based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 190 °C and can reduce or eliminate VOC content in products. ESTISOL 165 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 170 | Esti Chem A/S | ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as...voir plus ESTISOL 170 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 180 to 300 °C and can reduce or eliminate VOC content in products. ESTISOL 170 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 180 | Esti Chem A/S | ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as...voir plus ESTISOL 180 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 175 to 195 °C and can reduce or eliminate VOC content in products. ESTISOL 180 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 240 | Esti Chem A/S | ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as...voir plus ESTISOL 240 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 255 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 240 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 242 | Esti Chem A/S | ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as...voir plus ESTISOL 242 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 270 to 280 °C and can reduce or eliminate VOC content in products. ESTISOL 242 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 260 | Esti Chem A/S | ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as...voir plus ESTISOL 260 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 260 to 320 °C and can reduce or eliminate VOC content in products. ESTISOL 260 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 295 | Esti Chem A/S | ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as...voir plus ESTISOL 295 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 295 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 300 | Esti Chem A/S | ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as...voir plus ESTISOL 300 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 355 °C and can reduce or eliminate VOC content in products. ESTISOL 300 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 305 | Esti Chem A/S | ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as...voir plus ESTISOL 305 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 300 to 360 °C and can reduce or eliminate VOC content in products. ESTISOL 305 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 312 | Esti Chem A/S | ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as...voir plus ESTISOL 312 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of 320 to 340 °C and can reduce or eliminate VOC content in products. ESTISOL 312 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| ESTISOL 390 | Esti Chem A/S | ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC...voir plus ESTISOL 390 is a vegetable based ester fluid used as an alternative to aliphatic and aromatic hydrocarbons in formulated chemical products. It has a boiling range of >350 °C and can reduce or eliminate VOC content in products. ESTISOL 390 can act as a VOC replacement, solvency booster, or carrier fluid in industrial cleaners, printing inks, and paint strippers. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| Polymer ST 48 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...voir plus Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. voir moins | |
| Polymer ST 80 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 81 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotiv...voir plus Polymer ST 81 does not contain plasticizers, it offers a large variability in formulation design. It allows the formulation of both tin- and phthalate-free products. It allows formulators to enter markets such as wood construction, transport and automotive, assembly as well as light-weight construction. voir moins | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins | Request Sample |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins | Request Sample |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins | Request Sample |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | Request Sample |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing ...voir plus SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104A | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing...voir plus SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. voir moins | |
| SURFYNOL® 104BC | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in 2-Butoxyethanol. | |
| SURFYNOL® 104DPM | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Dipropylene Glycol Monomethyl Ether. | |
| SURFYNOL® 104E | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104H SURFACTANT | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 75% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104PA | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Isopropyl Alcohol. | |
| SURFYNOL® 104PG-50 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Propylene Glycol. | |
| SURFYNOL® 104S | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 46% active powder on Amorphous Silica. | |
| Surfynol® 107 L | Evonik Operations GmbH, BL Interface & Performance | Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid. | |
| SURFYNOL® 2502 | Evonik Operations GmbH, BL Interface & Performance | An ethoxylated/propoxylated acetylenic-based surfactant that provides specific performance benefits in a broad range of water-based systems. 100% active liquid. | |
| SURFYNOL® 420 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions both as a wetting agent and foam control agent. 100% active liquid with an HLB of 4. | |
| SURFYNOL® 440 | Evonik Operations GmbH, BL Interface & Performance | A nonfoaming, nonionic surfactant that is employed for substrate wetting. 100% active liquid with an HLB of 8. | |
| SURFYNOL® 465 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. It has a high cloud point for utilization in high-temperature systems. 100% active liquid with an HLB of 13. | |
| SURFYNOL® 485W | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions as a wetting agent and has slight emulsification properties. 75% active liquid with an HLB of 17. | |
| SURFYNOL® 82 | Evonik Operations GmbH, BL Interface & Performance | This is a 95% Dimethyl Octynediol surfactant. | |
| SURFYNOL® CT-131 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-131 is a solvent-free, low-foaming pigment grind aid designed for use in aqueous systems. | |
| SURFYNOL® CT-171 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-171 is a solvent-free anionic/nonionic grind aid designed to provide both effective pigment wetting and dispersing characteristics for many types of organic pigments. | |
| Surfynol® DF-110 D | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF 110 D is a very compatible molecular defoamer basedon Gemini surfactant technology. Free of silicone and silica. Offers additional dynamic wetting properties. | |
| Surfynol® DF-110BC Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surfa...voir plus Surfynol® DF-110BC defoamer is a highly effective, nonionic, molecular defoamer and deaerator. This defoaming/deairentraining agent can be used for a wide variety of applications where foam prevention or foam elimination is necessary without causing surface defects. voir moins | |
| SURFYNOL® DF-110L | Evonik Operations GmbH, BL Interface & Performance | Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide ...voir plus Surfynol DF-110C, Surfynol DF-110D, and Surfynol DF-110L molecular defoamers are highly effective, non-ionic organic products. They do not contain silicone, silica or fluoro products. These three defoaming/de-air entraining agents are useful for a wide variety of applications where foam prevention or foam elimination is nescessary without causing surface defects. voir moins | |
| Surfynol® DF-178 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for appl...voir plus Surfynol® DF-178 Defoamer is a formulated defoamer and de-aerator that provides strong defoaming and microfoam control and is particularly effective in spray applications. It is a liquid, 100% active, silicone-based product developed specifically for applications in water-borne coatings and graphic arts that demand both powerful defoaming and defect-free surfaces. voir moins | |
| Surfynol® DF-220 Defoamer | Evonik Operations GmbH, BL Interface & Performance | Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid tha...voir plus Surfynol® DF-220 Defoamer is a 100% active, silicone-free, silica-free, and alkylphenol ethoxylate (APE)-free organic defoamer that can provide not only high initial efficacy, but also long term sustained defoaming. It is a clear, low viscosity liquid that has been specifically designed to be used in a variety of water-based formulations, including printing inks, coatings and adhesives. voir moins | |
| SURFYNOL® DF-37 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. 100% active liquid. | |
| SURFYNOL® DF-37 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. A unique additive designed to minimize web formation during latex glove and waterborne coating dipping processes. | |
| SURFYNOL® DF-58 | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. The product has strong foam control and deairation performance. 100% active liquid. | |
| SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. It has strong foam control and deairation performance. Developed for use in water-based coating and ink formulations where strong, rapid defoaming is required. 100% active liquid. | |
| SURFYNOL® DF-62 | Evonik Operations GmbH, BL Interface & Performance | An ether-modified polysiloxane-based defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time. 100% active liquid. | |
| SURFYNOL® DF-62 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | Ether-modified, silicone defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time in a variety of waterborne formulations. Useful when long-term defoamer efficacy is needed. 100% active liquid. | |
| SURFYNOL® DF-66 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A liquid, acetylenic-modified polysiloxane-based emulsion defoamer which provides excellent balance of initial knockdown and sustained defoaming with no detrimental effects. Designed for use in aqueous ink and coating systems. 46% active liquid. | |
| SURFYNOL® DF-695 | Evonik Operations GmbH, BL Interface & Performance | A silicone emulsion defoamer, which provides initial and sustained defoaming performance in water-based formulations. 100% active liquid. | |
| SURFYNOL® DF-695 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based emulsion defoamer designed for use in aqueous ink systems. It is recommended for use in grinding and dispersion as well as letdown applications. 100% active liquid. | |
| SURFYNOL® MD-600S | Evonik Operations GmbH, BL Interface & Performance | This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast...voir plus This is a highly effective powder product designed to eliminate air entrapment in cementitious-based products for the construction industry. It allows for fast-acting defoaming with long-lasting deaeration, at a molecular level. It also ensures the fast escape of air entrapped while incorporating water and during mixing. voir moins | |
| Surfynol® MD20 | Evonik Operations GmbH, BL Interface & Performance | Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minim...voir plus Surfynol® MD20 is a 100% active, nonsilicone, liquid product based on Gemini Surfactant Technology. This multifunctional defoamer provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Additional advantages of Surfynol® MD20 include, long-lasting defoamer efficacy, ease of incorporation and good compatibility without separation, synergestic with typical wetting agents, eliminates microfoam, wide compounding latitude, solvent-free and temperature and pH stable (pH 1-13). voir moins | |
| SURFYNOL® PSA-336 | Evonik Operations GmbH, BL Interface & Performance | A powerful solvent-free wetting agent with moderate foaming tendencies. | |
| SURFYNOL® SE | Evonik Operations GmbH, BL Interface & Performance | A nonionic defoaming surfactant which can act as a highly effective wetting agent, defoamer and viscosity stabilizer and often performs more than one of these functions in combination. 80% active liquid with an HLB of 4-5. | |
| SURFYNOL® SE-F | Evonik Operations GmbH, BL Interface & Performance | A nonionic self-emulsifiable surfactant that will reduce surface tension and control foam. 80% active liquid with an HLB of 4-5. | |
| TEGOPAC® Bond 150 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number ...voir plus TEGOPAC® Bond 150 is recommended for usage as a binder in assembly adhesives and sealant formulations. The combination of outstanding through-cure and excellent elastic recovery properties allows formulations with TEGOPAC® Bond 150 to be used in a number of demanding applications, e.g. in construction of sandwich elements, for flexible bonding in transport applications or for high quality expansion joints. voir moins | |
| TEGOPAC® Bond 160 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties,...voir plus TEGOPAC® Bond 160 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 160 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 170 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties,...voir plus TEGOPAC® Bond 170 is a silylated polymer that is used for production of neutral curing adhesives and sealants. The polymer is based on a unique polymer technology with lateral crosslinking groups. TEGOPAC® Bond 170 shows excellent through cure properties, improved water & thermal resistance and excellent elastic recovery properties. The low polymer viscosity allows quick & easy handling. voir moins | |
| TEGOPAC® Bond 251 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Bond 251 is a hybrid polymer with a modified backbone that contains hydrophilic segments. Formulations with TEGOPAC® Bond 251 are suitable to replace flexible PUR adhesives and sealants. | |
| TEGOPAC® RD 1 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 1 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® RD 2 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers,...voir plus TEGOPAC® RD 2 is a silane-modified polymers which can be used to reduce viscosities of adhesives & sealant formulations. It can be blended with different types of silane-modified polymers and epoxy polymers. Formulating with various plasticizers, fillers, and other additives is possible to address applications like parquet adhesives, roof sealing applications or pressure sensitive adhesives. voir moins | |
| TEGOPAC® Seal 100 | Evonik Operations GmbH, BL Interface & Performance | TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also ...voir plus TEGOPAC® Seal 100 is a moisture curing silane-modified polymer recommended for low modulus sealant formulations which are used in construction applications (e.g. for façades, expansion joints, etc. ) or for indoor applications. TEGOPAC® Seal 100 is also recommended for use in sealant and adhesive formulations where vibration and sound dampening is an issue. voir moins | |
| ZetaSperse® 170 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring grou...voir plus ZetaSperse® 170 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles with acidic surface groups. A nonionic stabilizing surfactant, ZetaSperse® 170 dispersant utilizes a tertiary amine anchoring group that has been found to have particularly strong affinity for carbon black pigments, titanium dioxide pigments, and other pigments and particles with acidic surface groups. ZetaSperse® 170 dispersant is most effective when used as a secondary dispersant in conjunction with anionic polymeric dispersants and grind resins where it can provide significant wetting, milling, and steric stabilization benefits, often improving milling efficiency, color development, and dispersion stability, allowing formulators to achieve higher performance. voir moins | |
| ZetaSperse® 179 Dispersant | Evonik Operations GmbH, BL Interface & Performance | ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, c...voir plus ZetaSperse® 179 Dispersant was designed to provide steric stabilization for the aqueous dispersion of pigments and particles. A nonionic, high-HLB surfactant, ZetaSperse® 179 Dispersant provides performance benefits in the aqueous dispersion of organic, carbon black, and inorganic pigments as well as fillers and functional solid chemicals. Ideal applications include resinated dispersions, colorants and pigment dispersions, inks and graphic arts, architectural and industrial coatings, and industrial processes. voir moins |
