| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...voir plus FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. voir moins | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...voir plus FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. voir moins | |
| HP series™ HM080 | Polygroup Inc. | HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...voir plus HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. voir moins | |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...voir plus MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. voir moins | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...voir plus MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. voir moins | |
| NOVACOM-P™ HFS2100P | Polygroup Inc. | NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EV...voir plus NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EVOH, Nylon and other materials. Primarily markets for these materials are plastics compounding and mixed plastic recycle industries as compatibilizer. voir moins | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins | Request Sample |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins | Request Sample |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins | Request Sample |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | Request Sample |
| PROPOLDER™ MPP2010 | Polygroup Inc. | PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2020 | Polygroup Inc. | PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2040 | Polygroup Inc. | PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2060 | Polygroup Inc. | PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2080 | Polygroup Inc. | PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| PROPOLDER™ MPP2100 | Polygroup Inc. | PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...voir plus PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. voir moins | |
| RA100 | Guangxi Zhongchang Resin Co., Ltd. | RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA100 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. voir moins | |
| RA100W | Guangxi Zhongchang Resin Co., Ltd. | RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA100W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 100ºC and an acid number less than or equal to 190 mgKOH/g. voir moins | |
| RA120 | Guangxi Zhongchang Resin Co., Ltd. | RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA120 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. voir moins | |
| RA120W | Guangxi Zhongchang Resin Co., Ltd. | RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA120W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 120ºC and an acid number less than or equal to 210 mgKOH/g. voir moins | |
| RA140 | Guangxi Zhongchang Resin Co., Ltd. | RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA140 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. voir moins | |
| RA140W | Guangxi Zhongchang Resin Co., Ltd. | RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesi...voir plus RA140W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 140ºC and an acid number less than or equal to 145 mgKOH/g. voir moins | |
| RA90 | Guangxi Zhongchang Resin Co., Ltd. | RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive...voir plus RA90 is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. voir moins | |
| RA90W | Guangxi Zhongchang Resin Co., Ltd. | RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesiv...voir plus RA90W is a light yellow flaky solid derived from modified rosin. This product provides dissolvability in low carbon alcohol, light color aging resistance and light resistance used in alcohol and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink, paints and electronic flux. It contains a softening point of less than or equal to 90ºC and an acid number less than or equal to 180 mgKOH/g. voir moins | |
| RF95 | Guangxi Zhongchang Resin Co., Ltd. | RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters...voir plus RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters, azulene ketones and aromatic hydrocarbon. voir moins | |
| RGF100 | Guangxi Zhongchang Resin Co., Ltd. | RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon so...voir plus RGF100 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF100W | Guangxi Zhongchang Resin Co., Ltd. | RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon s...voir plus RGF100W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 97-103ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF90 | Guangxi Zhongchang Resin Co., Ltd. | RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solv...voir plus RGF90 is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RGF90W | Guangxi Zhongchang Resin Co., Ltd. | RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon sol...voir plus RGF90W is a light yellow flaky solid and a glycerol rosin ester used in a variety of adhesives due to its heat stability and polymer compatibility. This product has a softening point between 87-93ºC and is soluble in aromatic and aliphatic hydrocarbon solvents (petroleum benzine, mineral spirit, benzene, ethyl acetate, acetone),esters, ketones and chlorinated solvents. It is compatible with several polymers, resins, alkyds and more. voir moins | |
| RL10 | Guangxi Zhongchang Resin Co., Ltd. | RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a pr...voir plus RL10 is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 25 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| RL10W | Guangxi Zhongchang Resin Co., Ltd. | RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a p...voir plus RL10W is a light yellow flaky solid and a liquid rosin ester tackifier that contains low odor and strong stability with an acid number of less than or equal to 20 mgKOH/g. This product is most useful when a specific adhesion and wetting performance of a premium rosin ester is required. It can also be applied to sealants and coatings. voir moins | |
| Rosin Modified Phenolic Resin - 2112 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It ...voir plus Rosin Modified Phenolic Resin - 2112 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than or equal to 135ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2116 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2116 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 151ºC and an acid number less than or equal to 18. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Modified Phenolic Resin - 2118 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble i...voir plus Rosin Modified Phenolic Resin - 2118 is a product of esterification derived from glycerol (or pentaerythrite) with the polycondensate of rosin. This product has a softening point less than 157ºC and an acid number less than or equal to 20. It is soluble in hydrocarbon, aroma, ester, ketone, benzine, benzene, ethyl benzine, spirit and turpentine for use in paint, printing ink and adhesives. voir moins | |
| Rosin Pentaerythrite Ester - 145 | Guangxi Zhongchang Resin Co., Ltd. | Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kind...voir plus Rosin Pentaerythrite Ester - 145 is the produce of esterification of rosin with pentaerythrite. This product dissolves in ester ,ketone and aromatic hydrocarbon and mixes well with polymers. It is used to increase initial adhesive strength of various kinds of adhesive. voir moins | |
| RPF100 | Guangxi Zhongchang Resin Co., Ltd. | RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ...voir plus RPF100 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100A | Guangxi Zhongchang Resin Co., Ltd. | RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low...voir plus RPF100A is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than four and an acid number less than or equal to 30 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100B | Guangxi Zhongchang Resin Co., Ltd. | RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low...voir plus RPF100B is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than five and an acid number less than or equal to 40 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF100W | Guangxi Zhongchang Resin Co., Ltd. | RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ...voir plus RPF100W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 97-103ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...voir plus RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...voir plus RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. voir moins | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...voir plus SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. voir moins |
