| 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane | Dalian Onichem Co., Ltd. | 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is a coupling and crosslinking agent for waterborne systems. 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is used in latexes and PUD. | Request Sample |
| 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane | Dalian Onichem Co., Ltd. | 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is a coupling agent for epoxy composites. 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is compatible with cationic cure chemistries. | Request Sample |
| 205 | U.S. Zinc | 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...voir plus 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205H | U.S. Zinc | 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...voir plus 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205HSA | U.S. Zinc | 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...voir plus 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). voir moins | |
| 205L | U.S. Zinc | 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...voir plus 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205XL | U.S. Zinc | 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....voir plus 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. voir moins | |
| 210 | U.S. Zinc | 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...voir plus 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210E | U.S. Zinc | 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...voir plus 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210H | U.S. Zinc | 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...voir plus 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210HSA | U.S. Zinc | 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...voir plus 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. voir moins | |
| 210L | U.S. Zinc | 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...voir plus 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 3-Chloropropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties,...voir plus 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropylmethyldimethoxysilane is also the raw materials for other Organo-functional silanes with methyldimethoxy. voir moins | Request Sample |
| 3-Chloropropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as c...voir plus 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltriethoxysilane is also the key intermediate for other Organo-functional silanes with triethoxy. voir moins | Request Sample |
| 3-Chloropropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimetho...voir plus 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimethoxysilane is also a key intermediate for the preparation of a variety of amino-, mercapto- and methacryloyloxyorganosilanes which are used as silane coupling agents. voir moins | Request Sample |
| 3-Glycidoxypropylmethyldiethoxysilane | Dalian Onichem Co., Ltd. | 3-Glycidoxypropylmethyldiethoxysilane is a coupling and crosslinking agent for waterborne systems. 3-Glycidoxypropylmethyldiethoxysilane is used in acrylic SBR and polyurethane adhesives. | Request Sample |
| 3-Glycidoxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Glycidoxypropyltriethoxysilane is an adhesion promoter in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. | Request Sample |
| 3-Isocyanatopropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Isocyanatopropyltriethoxysilane is a bonding additive and used for polymer endcapping. | Request Sample |
| 3-Isocyanatopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Isocyanatopropyltrimethoxysilane is a crosslinking agent used in silylated polyurethanes. | Request Sample |
| 3-Mercaptopropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Mercaptopropyltriethoxysilane is a coupling agent for sulfur, cured rubber, and polyurethanes. | Request Sample |
| 3-Mercaptopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Mercaptopropyltrimethoxysilane is a coupling agent for sulfur, cured rubber and polyurethanes. | Request Sample |
| 3-Methacryloxypropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropylmethyldimethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropylmethyldimethoxysilane is used as a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| 3-Methacryloxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropyltriethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropyltriethoxysilane is a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| 3-Thiocyanatopropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Thiocyanatopropyltriethoxysilane is a coupling agent for mechanical rubber goods, and shoe soles. | Request Sample |
| 3-Ureidopropyltriethoxysilane (50% in Methanol) | Dalian Onichem Co., Ltd. | 3-Ureidopropyltriethoxysilane (50% in Methanol) is a colorless to light brown liquid which boils at 64.5°C. It is an ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass. | Request Sample |
| 3-Ureidopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | 3-Ureidopropyltrimethoxysilane is a bonding additive suited for contaminated surfaces. | Request Sample |
| Aqueous Aminoalkyl Silicone Solutions | Dalian Onichem Co., Ltd. | Aqueous Aminoalkyl Silicone Solutions is used for waterborne coatings, adhesives, sealants and primers. | Request Sample |
| AZO66 | U.S. Zinc | AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...voir plus AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| AZO66L | U.S. Zinc | AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...voir plus AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| AZO66XL | U.S. Zinc | AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...voir plus AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. voir moins | |
| AZO77H | U.S. Zinc | AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...voir plus AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). voir moins | |
| AZO77HSA | U.S. Zinc | AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...voir plus AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). voir moins | |
| Bis-[3-(Triethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Triethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bis-[3-(Trimethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Trimethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bis[3-(Triethoxysilyl)Propyl]Disulfide | Dalian Onichem Co., Ltd. | Bis[3-(Triethoxysilyl)Propyl]Disulfide is a coupling agent for rubber belts, hoses, shoe soles and silica filled tires. | Request Sample |
| Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide | Dalian Onichem Co., Ltd. | Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide is a bifunctional polysulfide silane with four sulfur atoms in the center of structure that finds use as adhesion promoter for precious metals, and coupling agent & vulcanizing agent for rubbers. It is ayellowish ...voir plus Bis[3-(Triethoxysilyl)Propyl]Tetrasulfide is a bifunctional polysulfide silane with four sulfur atoms in the center of structure that finds use as adhesion promoter for precious metals, and coupling agent & vulcanizing agent for rubbers. It is ayellowish and transparent liquid used to improve the physical properties of sulfur cured compounds and to establish the chemical link between rubber and silica or other active white fillers. voir moins | Request Sample |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Glutaraldehyde Technical Grade | Dalian Onichem Co., Ltd. | Glutaraldehyde Technical Grade is a colorless, transparent liquid which boils at 101°C. It is frequently used as a disinfecting agent, sterilizing agent, and leather tanning agent. Glutaraldehyde Technical Grade is also used as a fixative for light or el...voir plus Glutaraldehyde Technical Grade is a colorless, transparent liquid which boils at 101°C. It is frequently used as a disinfecting agent, sterilizing agent, and leather tanning agent. Glutaraldehyde Technical Grade is also used as a fixative for light or electron microscopy. voir moins | Request Sample |
| Glyoxal 40% | Dalian Onichem Co., Ltd. | Glyoxal 40% is a colorless to pale yellow and transparent liquid which boils at 104°C. It is most widely used as a cross-linking agent in the production of permanent press resins for textiles, of moisture resistant glues and adhesives, as well as moisture...voir plus Glyoxal 40% is a colorless to pale yellow and transparent liquid which boils at 104°C. It is most widely used as a cross-linking agent in the production of permanent press resins for textiles, of moisture resistant glues and adhesives, as well as moisture resistant foundry binders. Glyoxal 40% is also used to improve the wet strength of paper and the moisture resistance of leather. voir moins | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| Methyltriethoxysilane | Dalian Onichem Co., Ltd. | Methyltriethoxysilane is a colorless and transparent liquid which boils at 143°C. It is used to synthesize methyl silicone resins and water-proofing adhesives, to polymerize with other monomers to be special and high molecular compounds. Methyltriethoxysi...voir plus Methyltriethoxysilane is a colorless and transparent liquid which boils at 143°C. It is used to synthesize methyl silicone resins and water-proofing adhesives, to polymerize with other monomers to be special and high molecular compounds. Methyltriethoxysilane can also be used as a coupling agent for inorganic materials and as strengthening agent for laminated plastic products. voir moins | Request Sample |
| Methyltrimethoxysilane | Dalian Onichem Co., Ltd. | Methyltrimethoxysilane is a colorless and transparent liquid which boils at 102°C. It can be used to polymerize with other monomers to be special and high molecular compounds. Methyltrimethoxysilane can also be used as a cross-linking agent for RTV, as c...voir plus Methyltrimethoxysilane is a colorless and transparent liquid which boils at 102°C. It can be used to polymerize with other monomers to be special and high molecular compounds. Methyltrimethoxysilane can also be used as a cross-linking agent for RTV, as coupling agent for inorganic materials and as a strengthening agent for laminated plastic products. voir moins | Request Sample |
| N-Octyltrimethoxysilane | Dalian Onichem Co., Ltd. | N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper...voir plus N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. voir moins | Request Sample |
| N-Phenyl-3-Aminopropyltrimethoxysilane | Dalian Onichem Co., Ltd. | N-Phenyl-3-Aminopropyltrimethoxysilane is an adhesion promoter additive and coupling agent especially suited for SPUR. | Request Sample |
| N-Propyltriethoxysilane | Dalian Onichem Co., Ltd. | N-Propyltriethoxysilane is an alkyltrialkoxy silane. This product is an important component in sol-gel systems. | Request Sample |
| N-Propyltrimethoxysilane | Dalian Onichem Co., Ltd. | N-Propyltrimethoxysilane is an alkyltrialkoxy silane. This product is an important component in sol-gel systems. | Request Sample |
| Organosilane 2A301 | Dalian Onichem Co., Ltd. | Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This p...voir plus Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This product is suitable for use with acrylic, isocyanate, polyurethane, ABS, PVC, and styrene polymers. voir moins | Request Sample |
| Organosilane A301 | Dalian Onichem Co., Ltd. | Organosilane A301 is a colorless and transparent liquid which boils at 210°C. It is an amino-functional coupling agent that is used over a broad range of applications. Organosilane A301 provides superior bonds between inorganic substrates and organic poly...voir plus Organosilane A301 is a colorless and transparent liquid which boils at 210°C. It is an amino-functional coupling agent that is used over a broad range of applications. Organosilane A301 provides superior bonds between inorganic substrates and organic polymers by improving organics/inorganics reactivity and chemical bonding, especially for fiberglass reinforced composites. voir moins | Request Sample |
| Organosilane A301B | Dalian Onichem Co., Ltd. | Organosilane A301B is a n-butylamino group silane coupling agent which boils at 238°C. It is a colorless to slight yellowish liquid which is the most recommended silage for endcapping polyurethanes. Organosilane A301B leads to colorless low-viscosity PU p...voir plus Organosilane A301B is a n-butylamino group silane coupling agent which boils at 238°C. It is a colorless to slight yellowish liquid which is the most recommended silage for endcapping polyurethanes. Organosilane A301B leads to colorless low-viscosity PU prepolymers with improved UV stability and reduced yellowing tendency of sealants. This product has fast reacting with free NCO groups and does not contain toxic aniline. voir moins | Request Sample |
| Organosilane A302 | Dalian Onichem Co., Ltd. | Organosilane A302 is a versatile amino-functional coupling agent that boils at 217°C. It is a colorless and transparent liquid that is used over a broad range of applications. Organosilane A302 provides superior bonds between inorganic substrates and orga...voir plus Organosilane A302 is a versatile amino-functional coupling agent that boils at 217°C. It is a colorless and transparent liquid that is used over a broad range of applications. Organosilane A302 provides superior bonds between inorganic substrates and organic polymers by improving organics/inorganics reactivity and chemical bonding, especially for fiberglass reinforced composites. voir moins | Request Sample |
| Organosilane A302-1 | Dalian Onichem Co., Ltd. | Organosilane A302-1 is nominally a 40% active aqueous solution of 3-Aminopropyltriethoxysilane. It is the hydrolysate of Organosilane A302. This product is mainly used for foundry resins and sealants. | Request Sample |
| Organosilane A312 | Dalian Onichem Co., Ltd. | Organosilane A312 is an amino-functional coupling agent which boils at 88°C. It is a colorless and transparent liquid that is used over a broad range of applications. Organosilane A312 provides superior bonds between inorganic substrates and organic polym...voir plus Organosilane A312 is an amino-functional coupling agent which boils at 88°C. It is a colorless and transparent liquid that is used over a broad range of applications. Organosilane A312 provides superior bonds between inorganic substrates and organic polymers by improving organics/inorganics reactivity and chemical bonding, especially for resins. voir moins | Request Sample |
| Organosilane AE301 | Dalian Onichem Co., Ltd. | Organosilane AE301 is a diamino-functional silane which boils at 259°C. It is a colorless and transparent liquid that is used as a coupling agent providing superior elongation, flexibility and spreading at the interface of polymers. Organosilane AE301 is ...voir plus Organosilane AE301 is a diamino-functional silane which boils at 259°C. It is a colorless and transparent liquid that is used as a coupling agent providing superior elongation, flexibility and spreading at the interface of polymers. Organosilane AE301 is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, and metal. voir moins | Request Sample |
| Organosilane AE301T | Dalian Onichem Co., Ltd. | Organosilane AE301T is a diamine functional silane that fins use as a coupling agent providing superior elongation, flexibility, and spreading at the interface of polymers. It is used to promote adhesion between resins that react with amino groups and t...voir plus Organosilane AE301T is a diamine functional silane that fins use as a coupling agent providing superior elongation, flexibility, and spreading at the interface of polymers. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, and metal. voir moins | Request Sample |
| Organosilane AE311 | Dalian Onichem Co., Ltd. | Organosilane AE311 is a diamino functional silane which boils at 265°C. It is a colorless and transparent liquid that uses a coupling agent which provides superior elongation, flexibility and spreading at the interface of polymers. Organosilane AE311 is u...voir plus Organosilane AE311 is a diamino functional silane which boils at 265°C. It is a colorless and transparent liquid that uses a coupling agent which provides superior elongation, flexibility and spreading at the interface of polymers. Organosilane AE311 is used to promote adhesion between resins that react with amino acid groups and the surfaces of glass, mineral, and metal. voir moins | Request Sample |
| Organosilane G301 | Dalian Onichem Co., Ltd. | Organosilane G301 is a glycidoxy (epoxy) functional silane which boils at 290°C. It is a colorless and transparent liquid that is used as a coupling agent for unsaturated polyester- fiberglass composites, for polysulfide and polyurethane caulks and sealan...voir plus Organosilane G301 is a glycidoxy (epoxy) functional silane which boils at 290°C. It is a colorless and transparent liquid that is used as a coupling agent for unsaturated polyester- fiberglass composites, for polysulfide and polyurethane caulks and sealants, and for glass roving size-binders. Organosilane G301 is also used as an adhesion promoter in waterborne systems. voir moins | Request Sample |
| Organosilane G312 | Dalian Onichem Co., Ltd. | Organosilane G312 is a glycidoxy (epoxy)-functional silane that is used as a coupling agent for unsaturated polyester-fiberglass composites, for polysulfide and polyurethane caulks and sealants, and for glass roving size-binders. It is also used as an adh...voir plus Organosilane G312 is a glycidoxy (epoxy)-functional silane that is used as a coupling agent for unsaturated polyester-fiberglass composites, for polysulfide and polyurethane caulks and sealants, and for glass roving size-binders. It is also used as an adhesion promoter in waterborne systems. voir moins | Request Sample |
| Organosilane IC301 | Dalian Onichem Co., Ltd. | Organosilane IC301 is an isocyanate silane which is typically used for silylated prepolymers like SPUR or silane modification of other polymers. It may also be used as an adhesion promoter for difficult substrates like nylon, by interacting with the surfa...voir plus Organosilane IC301 is an isocyanate silane which is typically used for silylated prepolymers like SPUR or silane modification of other polymers. It may also be used as an adhesion promoter for difficult substrates like nylon, by interacting with the surface via its silane or NCO functionality. voir moins | Request Sample |
| Organosilane IC302 | Dalian Onichem Co., Ltd. | Organosilane IC302 is an isocyanate silane typically used for silylated prepolymers such as SPUR or silane modification of other polymers. It is used as an adhesion promoter for difficult substrates like nylon, by interacting with the surface via its sila...voir plus Organosilane IC302 is an isocyanate silane typically used for silylated prepolymers such as SPUR or silane modification of other polymers. It is used as an adhesion promoter for difficult substrates like nylon, by interacting with the surface via its silane or NCO functionality. voir moins | Request Sample |
| Organosilane M301 | Dalian Onichem Co., Ltd. | Organosilane M301 is a methacrylic-functional silane which boils at 255°C. It is a colorless and transparent liquid that is used as a coupling agent to improve adhesion of free radical cured resins, dry and wet flexural and compressive strength of composi...voir plus Organosilane M301 is a methacrylic-functional silane which boils at 255°C. It is a colorless and transparent liquid that is used as a coupling agent to improve adhesion of free radical cured resins, dry and wet flexural and compressive strength of composites, the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins. Organosilane M301 is also used to modify surfaces by copolymerizing or grafting. voir moins | Request Sample |
| Organosilane MTA | Dalian Onichem Co., Ltd. | Organosilane MTA is a colorless to light yellowish liquid which boils at 87°C. This product is mainly used as a cross-linking agent for RTV silicone rubber and acidity silicone sealants. Organosilane MTA will crystallize at lower temperature. | Request Sample |
| Organosilane MTO | Dalian Onichem Co., Ltd. | Organosilane MTO is a colorless to yellowish transparent liquid which boils at 110°C. This product is widely used as a cross-linker/coupling agent for RTV (room temperature vulcanizing) silicone rubber and silicone sealant. | Request Sample |
| Organosilane NOEO | Dalian Onichem Co., Ltd. | Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon...voir plus Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. voir moins | Request Sample |
| Organosilane S1 | Dalian Onichem Co., Ltd. | Organosilane S1 is a thiocarboxylate functional silane. It is designed to reduce the number of non-productive mixing steps, while improving processing and performance of the tread compound. It requires only a single non-productive mixing step. With this s...voir plus Organosilane S1 is a thiocarboxylate functional silane. It is designed to reduce the number of non-productive mixing steps, while improving processing and performance of the tread compound. It requires only a single non-productive mixing step. With this silane, mixing temperature as high as 180°C can be employed, dependent on the formulation. voir moins | Request Sample |
| Organosilane S301 | Dalian Onichem Co., Ltd. | Organosilane S301 is a mercapto-functional silane that possesses a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. It is used as a coupling agent in polysulfide and polyurethane caulks and sealants. It is especially useful in su...voir plus Organosilane S301 is a mercapto-functional silane that possesses a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. It is used as a coupling agent in polysulfide and polyurethane caulks and sealants. It is especially useful in sulfur-cured and metal oxide-cured elastomers. It works as an adhesion promoter, crosslinking agent, surface modifier, or reactive agent. voir moins | Request Sample |
| Organosilane VME-S | Dalian Onichem Co., Ltd. | Organosilane VME-S is a combination of Organosilane VME and Silica carrier. It can be used as an efficient activators for inorganic and organic surfaces. The preparation on silica provides a better handling and miscibility into the rubber. In general, it ...voir plus Organosilane VME-S is a combination of Organosilane VME and Silica carrier. It can be used as an efficient activators for inorganic and organic surfaces. The preparation on silica provides a better handling and miscibility into the rubber. In general, it is used in silicate blend, peroxide, sulfur, and metal oxide curing systems. voir moins | Request Sample |
| Phenyltriethoxysilane | Dalian Onichem Co., Ltd. | Phenyltriethoxysilane is an arylalkoxy silane. This product is used for silane coupling agent blends. | Request Sample |
| Phenyltrimethoxysilane | Dalian Onichem Co., Ltd. | Phenyltrimethoxysilane is an arylalkoxy silane. It is used for silane coupling agent blends. | Request Sample |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...voir plus ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. voir moins | Request Sample |
| ProFlex 8 | P.A.T. Products | ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes ny...voir plus ProFlex 8 is a mixture of ortho and para n-Ethyl Toluenesulfonamide. It is one of the most widely compatible plasticizers. In addition, the product promotes adhesion and has excellent thermal stability. ProFlex 8 is highly polar and readily plasticizes nylon, other polyamides, shellac, cellulose acetate, and protein materials. It is outstanding for making compounds resistant to oils, solvents, and greases. Because of its low solubility in petroleum hydrocarbons, ProFlex 8 may be used to produce grease and oil-resistant coatings and adhesives. Nitrocellulose lacquers resistant to grease and aliphatic hydrocarbons may be made by combining ProFlex 8 with ProFlex MH (a sulfonamide-formaldehyde resin). In nylon and other polyamides, ProFlex 8 aids processing by lowering the melting point and improving low temperature flexibility. Cellulose acetate plasticized with ProFlex 8 has a brilliance an polish not obtained with other plasticizers, and sheets and films obtain high tensile strength, elongation and flexibility. Polyvinyl acetate adhesives plasticized with ProFlex 8 show exceptional grease resistance and have a quick tack and adhesion for joining difficult surfaces such as rubber to metal. ProFlex 8 is an excellent dye solvent and pigment dispersant. voir moins | Request Sample |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...voir plus ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. voir moins | Request Sample |
| ProFlex MS 80 | P.A.T. Products | ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nit...voir plus ProFlex MS 80 is a toluene sulfonamide based plasticizing co-resin dissolved in 20% butyl acetate. It is used in Nail lacquers, Coatings, Adhesives and Inks. ProFlex MS 80 is the liquid version of ProFlex MH, the most widespread plasticizing resin for nitrocellulose based nail lacquers. ProFlex MS 80 has the advantage that it can be easily poured into formulation during the production process. ProFlex MS 80 imparts improved adhesion and wear properties and generally provides the lacquer system with a shiny glossy appearance. ProFlex MS 80 can also be used as plasticizing resin in solvent borne coating and ink formulations. In these applications ProFlex MS 80 acts as a non-migratory plasticizing co-resin improving the adhesion and gloss of the system. Applications include nail lacquers, nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | Request Sample |
| Resveratrol | Dalian Onichem Co., Ltd. | Resveratrol is a selective inhibitor of cyclooxygenase-1(COX-1), antioxidant properties, phenolic compounds, particularly flavonoids. It has long been observed to have antioxidant activity with potential benefits for human health. Resveratrol is a potent ...voir plus Resveratrol is a selective inhibitor of cyclooxygenase-1(COX-1), antioxidant properties, phenolic compounds, particularly flavonoids. It has long been observed to have antioxidant activity with potential benefits for human health. Resveratrol is a potent phenolic antioxidant that also has antiproliferative and anti-inflammatory activity. voir moins | Request Sample |
| Tetraethyl Orthosilicate | Dalian Onichem Co., Ltd. | Tetraethyl Orthosilicate is a polymerization of silicone resins for use in paints and other surface modification applications. | Request Sample |
| Tetramethoxysilane | Dalian Onichem Co., Ltd. | Tetramethoxysilane is a polymerization of silicone resins for use in paints and other surface modification applications. | Request Sample |
| Tetrapropoxysilane | Dalian Onichem Co., Ltd. | Tetrapropoxysilane is used as starting materials for sol-gel systems. | Request Sample |
| Triamino-Functional Trimethoxysilane | Dalian Onichem Co., Ltd. | Triamino-Functional Trimethoxysilane is a general purpose bonding additive especially suited for PVC plastisols. | Request Sample |
| Vinylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | Vinylmethyldimethoxysilane is a copolymer in vinyl resins. It is used for unsaturated polyesters and mercapto resins. | Request Sample |
| Vinyltriethoxysilane | Dalian Onichem Co., Ltd. | Vinyltriethoxysilane is a coupling and crosslinking agent for free radical cured resins, in polyolefins and their composites. | Request Sample |
| Vinyltriisopropenyloxysilane | Dalian Onichem Co., Ltd. | Vinyltriisopropenyloxysilane is suited for waterborne systems. This product is used in acrylic and vinyl emulsions. | Request Sample |
| Vinyltrimethoxysilane | Dalian Onichem Co., Ltd. | Vinyltrimethoxysilane is a cross-linking agent for PE. This product is used as a moisture scavenger as well as a coupling agent for unsaturated polyesters. | Request Sample |
| Vinyltris-(2-Methoxyethoxy)Silane | Dalian Onichem Co., Ltd. | Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Sil...voir plus Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Silane is used mainly in mineral-filled EPM (ethylene propylene monomer) and EPDM (ethylene propylene diene monomer) cables. It is also used in the production of silane-modified polymers that serve as binders for paints and adhesives, and as an adhesion promoter in primers and coatings. voir moins | Request Sample |
