| 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) | ChemFine International Co., Ltd. | 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive. | |
| COPONYL™ 5065 | Nippon Gohsei | COPONYL™ 5065 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics and is residue free. Applications include masking tapes and protective masking...voir plus COPONYL™ 5065 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics and is residue free. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 5411 | Nippon Gohsei | COPONYL™ 5411 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides permanent adhesion, and is suitable for thick-layer application. Applications include double-sided tapes and foam...voir plus COPONYL™ 5411 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides permanent adhesion, and is suitable for thick-layer application. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 5560 | Nippon Gohsei | COPONYL™ 5560 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and isopropyl alcohol solvents. It is a one-component cross-linkage product. Applications include films and labels. This product is well ...voir plus COPONYL™ 5560 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and isopropyl alcohol solvents. It is a one-component cross-linkage product. Applications include films and labels. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ 5672 | Nippon Gohsei | COPONYL™ 5672 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective maski...voir plus COPONYL™ 5672 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective masking films. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 5697 | Nippon Gohsei | COPONYL™ 5697 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It is a general use hard-type resin used in PVC backing materials. This product is well suited for use in adhesives. | |
| COPONYL™ 5698 | Nippon Gohsei | COPONYL™ 5698 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It is a general use soft-type resin used in PVC backing materials. This product is well suited for use in adhesives. | |
| COPONYL™ 5705L | Nippon Gohsei | COPONYL™ 5705L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and low tack. Applications include masking tapes and protective masking films. This product is w...voir plus COPONYL™ 5705L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and low tack. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 5706-A | Nippon Gohsei | COPONYL™ 5706-A is a pressure sensitive adhesive resin formulated from acrylic acid ester using toluene and cellosolve solvents. It is ideal for screen coatings. This product is well suited for use in adhesives. | |
| COPONYL™ 5740 | Nippon Gohsei | COPONYL™ 5740 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides slight adhesion, good removability, heat resistance, and is residue free. Applications include masking tapes, pro...voir plus COPONYL™ 5740 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides slight adhesion, good removability, heat resistance, and is residue free. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 8065 | Nippon Gohsei | COPONYL™ 8065 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. This product is well suited for use in adhesives in medical applications such as fixing tapes for cataplasm and elastics. | |
| COPONYL™ 8137 | Nippon Gohsei | COPONYL™ 8137 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperatures. Applications include films and labels. This product is well suited for use in ...voir plus COPONYL™ 8137 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperatures. Applications include films and labels. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ 8694 | Nippon Gohsei | COPONYL™ 8694 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective maski...voir plus COPONYL™ 8694 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides strong adhesion and good removability. Applications include films and labels, masking tapes, and protective masking films. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ 8700 | Nippon Gohsei | COPONYL™ 8700 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good adhesion to olefin and is suitable for short-aging time. Applications include double-sided tapes and foam tapes. ...voir plus COPONYL™ 8700 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good adhesion to olefin and is suitable for short-aging time. Applications include double-sided tapes and foam tapes. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ 8708 | Nippon Gohsei | COPONYL™ 8708 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well su...voir plus COPONYL™ 8708 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 8711 | Nippon Gohsei | COPONYL™ 8711 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good processability and heat resistance. Applications include double-sided tapes and foam tapes. This product is well ...voir plus COPONYL™ 8711 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good processability and heat resistance. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 8815 | Nippon Gohsei | COPONYL™ 8815 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good removability, is residue free, and has weather resistance properties. Applications include masking tapes and...voir plus COPONYL™ 8815 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good removability, is residue free, and has weather resistance properties. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ 8976L | Nippon Gohsei | COPONYL™ 8976L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good heat resistance. Applications include films and labels. This product is well suited for use in adhesives. | |
| COPONYL™ N-2031 | Nippon Gohsei | COPONYL™ N-2031 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. This product provides different levels of adhesive properties depending on temperature. Applications include masking tapes ...voir plus COPONYL™ N-2031 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. This product provides different levels of adhesive properties depending on temperature. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-2147 | Nippon Gohsei | COPONYL™ N-2147 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides heat resistance, dimension stability, and is suitable for window film. Applications include films and labels, P...voir plus COPONYL™ N-2147 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides heat resistance, dimension stability, and is suitable for window film. Applications include films and labels, PVC backing materials, and optical. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-2260 | Nippon Gohsei | COPONYL™ N-2260 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides low adhesion, high tack, is heat resistant, and residue free. Applications include masking tapes, protective ma...voir plus COPONYL™ N-2260 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides low adhesion, high tack, is heat resistant, and residue free. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-2332 | Nippon Gohsei | COPONYL™ N-2332 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. The characteristics of this product are low adherence and soft type. This product is well suited for use in adhesives for m...voir plus COPONYL™ N-2332 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. The characteristics of this product are low adherence and soft type. This product is well suited for use in adhesives for medical applications. voir moins | |
| COPONYL™ N-2584 | Nippon Gohsei | COPONYL™ N-2584 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methanol solvents. It is alkaline soluble and suitable for splicing labels and paper. This product is well suited for use in adhesi...voir plus COPONYL™ N-2584 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methanol solvents. It is alkaline soluble and suitable for splicing labels and paper. This product is well suited for use in adhesive labels and films. voir moins | |
| COPONYL™ N-3449L | Nippon Gohsei | COPONYL™ N-3449L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes and protective masking films. This produ...voir plus COPONYL™ N-3449L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes and protective masking films. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ N-3483 | Nippon Gohsei | COPONYL™ N-3483 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. Applications include masking tapes and protective masking films. This product is well suited for use in adhesives. | |
| COPONYL™ N-3495HS | Nippon Gohsei | COPONYL™ N-3495HS is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes, protective masking films, double-sided...voir plus COPONYL™ N-3495HS is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides good adhesion to olefin. Applications include masking tapes, protective masking films, double-sided tapes, and foam tapes. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-3581 | Nippon Gohsei | COPONYL™ N-3581 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good wettability, and good adhesion to rough surfaces. Applications include masking tapes, protective masking films,...voir plus COPONYL™ N-3581 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good wettability, and good adhesion to rough surfaces. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-3816E | Nippon Gohsei | COPONYL™ N-3816E is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It has good durability and is suitable for optical film applications. This product is well suited for use in electronics and adhesives. | |
| COPONYL™ N-3933E | Nippon Gohsei | COPONYL™ N-3933E is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion for rounded surfaces and labels for refrigerated food. Applications include films and labels. Th...voir plus COPONYL™ N-3933E is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides good adhesion for rounded surfaces and labels for refrigerated food. Applications include films and labels. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ N-4399 | Nippon Gohsei | COPONYL™ N-4399 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides slight adhesion, adhesion to rough surfaces, and is residue free. Applications include masking tapes,...voir plus COPONYL™ N-4399 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides slight adhesion, adhesion to rough surfaces, and is residue free. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-4495 | Nippon Gohsei | COPONYL™ N-4495 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics. Applications include masking tapes, protective masking films, and processin...voir plus COPONYL™ N-4495 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It provides high-speed peeling characteristics. Applications include masking tapes, protective masking films, and processing. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-4510 | Nippon Gohsei | COPONYL™ N-4510 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good repulsion resistance. Applications include double-sided tapes and foam tapes. This product is well suited for u...voir plus COPONYL™ N-4510 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and toluene solvents. It has good repulsion resistance. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-4519L | Nippon Gohsei | COPONYL™ N-4519L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides strong adhesion and high tack. Applications include masking tapes and protective masking films. This...voir plus COPONYL™ N-4519L is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and acetone solvents. It provides strong adhesion and high tack. Applications include masking tapes and protective masking films. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-6593 | Nippon Gohsei | COPONYL™ N-6593 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It has good durability and is suitable for optical film applications. This product is well suited for use in electronics and adhesives. | |
| COPONYL™ N-6803 | Nippon Gohsei | COPONYL™ N-6803 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It is formulated to provide good corrosion resistance and for use in thin-layer optical applications. This product is well suited for us...voir plus COPONYL™ N-6803 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It is formulated to provide good corrosion resistance and for use in thin-layer optical applications. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-6941 | Nippon Gohsei | COPONYL™ N-6941 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good bubble resistance, has good durability, and is ideal for thin layer application. This product is well suited for use in...voir plus COPONYL™ N-6941 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good bubble resistance, has good durability, and is ideal for thin layer application. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-7136 | Nippon Gohsei | COPONYL™ N-7136 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and methyl ethyl ketone solvents. It is acid free and ideal for optical applications. This product is well suited for use in electronics and adhe...voir plus COPONYL™ N-7136 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and methyl ethyl ketone solvents. It is acid free and ideal for optical applications. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-7166 | Nippon Gohsei | COPONYL™ N-7166 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, methyl ethyl ketone solvents. It provides good corrosion resistance, and is ideal for thin layer application. This product is well suit...voir plus COPONYL™ N-7166 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, methyl ethyl ketone solvents. It provides good corrosion resistance, and is ideal for thin layer application. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-7245 | Nippon Gohsei | COPONYL™ N-7245 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methyl ethyl ketone solvents. This product is well suited for use in electronic and adhesive applications, especially thick-layer o...voir plus COPONYL™ N-7245 is a pressure-sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate, toluene, and methyl ethyl ketone solvents. This product is well suited for use in electronic and adhesive applications, especially thick-layer optical films. voir moins | |
| COPONYL™ N-7482 | Nippon Gohsei | COPONYL™ N-7482 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well suited for us...voir plus COPONYL™ N-7482 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good adhesion at low temperature. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-7483 | Nippon Gohsei | COPONYL™ N-7483 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good removability. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronic...voir plus COPONYL™ N-7483 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good removability. Applications include double-sided tapes and foam tapes. This product is well suited for use in electronics and adhesives. voir moins | |
| COPONYL™ N-7486 | Nippon Gohsei | COPONYL™ N-7486 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides general type adhesive properties and punching processability. Applications include films and labels. This produ...voir plus COPONYL™ N-7486 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides general type adhesive properties and punching processability. Applications include films and labels. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ N-7487 | Nippon Gohsei | COPONYL™ N-7487 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides high transparency and punching processability. Applications include films and labels. This product is well suit...voir plus COPONYL™ N-7487 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate and acetone solvents. It provides high transparency and punching processability. Applications include films and labels. This product is well suited for use in adhesives. voir moins | |
| COPONYL™ N-7520 | Nippon Gohsei | COPONYL™ N-7520 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good corrosion resistance, good whitening resistance, and is ideal for thin layer application. This product is well suited f...voir plus COPONYL™ N-7520 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It provides good corrosion resistance, good whitening resistance, and is ideal for thin layer application. This product is well suited for use in electronics and adhesives. voir moins | |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...voir plus Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. voir moins | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...voir plus Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...voir plus Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...voir plus Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. voir moins | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...voir plus Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...voir plus Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. voir moins | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...voir plus Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. voir moins | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...voir plus Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. voir moins | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...voir plus Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. voir moins | Request Sample |
| KTR-100 | Suparna Chemicals Ltd. | KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-100 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-100 has a softening point of 95 to 105 °C, in butyl acetate of 75 to 95 at 25 °C (cps), and a hydroxyl value of 170 to 200. voir moins | |
| KTR-118 | Suparna Chemicals Ltd. | KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-118 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-118 has a softening point of 105 to 115 °C, in butyl acetate of 100 to 120 at 25 °C (cps), and a hydroxyl value of 180 to 210. voir moins | |
| KTR-123 | Suparna Chemicals Ltd. | KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries...voir plus KTR-123 is a ketonic resin that has the appearance of white prills. It is neutral, light in color, and inert to saponification. It displays good pigment-wetting properties, and increases yield of coating systems. It is suitable for all types of industries, including nitrocellulose paints where it improves polishing characteristic and adhesion. In printing inks, it enhances adhesion, imparts gloss, improves drying properties, and increases solids content, where it is used in maleic resins, alkyd resins, nitro cellulose, and polyvinyl butyral. KTRs are also used in isocyanate based adhesive systems, as well as radiation cured adhesives and in water clear systems. KTR-123 has a softening point of 105 to 115 °C, in butyl acetate of 110 to 140 at 25 °C (cps), and a hydroxyl value of 200 to 230. voir moins | |
| Lansperse BIO868 | P.A.T. Products | Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fas...voir plus Lansperse BIO868 is a powerful dispersing agent for water-based systems. It contains 100% renewable and sustainable components. BIO868 is an especially powerful dispersant for reds and titanium dioxide. It gives high solids loading with good rheology, fast reduction of particle size, and sustainability profiling. voir moins | Request Sample |
| Mowinyl 081F | Nippon Gohsei | Mowinyl 081F is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good heat sealing properties, transparency of film, and adhesion to plastics, this product is well suited for use in adhesive and laminate applicat...voir plus Mowinyl 081F is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good heat sealing properties, transparency of film, and adhesion to plastics, this product is well suited for use in adhesive and laminate applications. voir moins | |
| Mowinyl 082 | Nippon Gohsei | Mowinyl 082 is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good heat sealing properties, transparency of film, and adhesion to PE, this product is well suited for use in adhesive and laminate applications. | |
| Mowinyl 109E | Nippon Gohsei | Mowinyl 109E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good adhesion to polyvinyl, plywood, plastic, and paper surfaces, this product is well suited for use in adhesive and laminate applications. | |
| Mowinyl 127N | Nippon Gohsei | Mowinyl 127N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and good mechanical stability, this product is well suited for use in woodworking and plywood adhesives and laminates. | |
| Mowinyl 128N | Nippon Gohsei | Mowinyl 128N is a water-based synthetic resin emulsion composed of vinyl acetate. With good general adhesion properties, this product is well suited for use in woodworking, plywood, and packaging adhesive applications. | |
| Mowinyl 135N | Nippon Gohsei | Mowinyl 135N is a water-based synthetic resin emulsion composed of vinyl acetate. With high viscosity and good adhesion properties, this product is well suited for use in woodworking and plywood adhesives and laminates. | |
| Mowinyl 138N | Nippon Gohsei | Mowinyl 138N is a water-based synthetic resin emulsion composed of vinyl acetate. With good adhesion and compatibility with urea-formaldehyde, this product is well suited for use in woodworking and plywood adhesives and and laminates. | |
| Mowinyl 168N | Nippon Gohsei | Mowinyl 168N is a water-based synthetic resin emulsion composed of vinyl acetate. With good mechanical stability and a longer open time, this product is well suited for use in woodworking, plywood, and packaging adhesives. | |
| Mowinyl 172E | Nippon Gohsei | Mowinyl 172E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With good adhesion and temperature resistance, this product is well suited for use in bookbinding and plastic and paper laminating applications. | |
| Mowinyl 180E | Nippon Gohsei | Mowinyl 180E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high ethylene content and good adhesion, especially to polyvinyl and other plastics, this product is well suited for use in adhesive and laminate a...voir plus Mowinyl 180E is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high ethylene content and good adhesion, especially to polyvinyl and other plastics, this product is well suited for use in adhesive and laminate applications. voir moins | |
| Mowinyl 185EK | Nippon Gohsei | Mowinyl 185EK is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high solids content and good adhesion to polyvinyl, plywood, plastic, and paper surfaces, this product is well suited for use in adhesive and lami...voir plus Mowinyl 185EK is a water-based synthetic resin emulsion composed of a vinyl acetate/ethylene copolymer. With high solids content and good adhesion to polyvinyl, plywood, plastic, and paper surfaces, this product is well suited for use in adhesive and laminate applications. voir moins | |
| Mowinyl 461 | Nippon Gohsei | Mowinyl 461 is a synthetic acrylic resin emulsion that provides good adhesion, high tack, and good retention for olefins. This product is well suited for use in film- and paper-type adhesive label and tape applications. | |
| Mowinyl 462 | Nippon Gohsei | Mowinyl 462 is a synthetic acrylic resin emulsion that provides good adhesion, high tack, and good retention for olefins. This product is well suited for use in film- and paper-type adhesive label and tape applications. | |
| Mowinyl 490 | Nippon Gohsei | Mowinyl 490 is a synthetic acrylic resin emulsion that features good adhesion, high tack, and a transparent starch type. This product is well suited for use in adhesive film sheet and tape applications. | |
| Mowinyl 500N | Nippon Gohsei | Mowinyl 500N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, sprayability, and anticorrosion properties, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 502N | Nippon Gohsei | Mowinyl 502N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, stable viscosity at low temperature, and excellent pressure resistance strength, this product is well suited for use in packaging adhesive and la...voir plus Mowinyl 502N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, stable viscosity at low temperature, and excellent pressure resistance strength, this product is well suited for use in packaging adhesive and laminate applications. voir moins | |
| Mowinyl 503N | Nippon Gohsei | Mowinyl 503N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion and stable viscosity at low temperature, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 504N | Nippon Gohsei | Mowinyl 504N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion and stable viscosity at low temperature, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 590N | Nippon Gohsei | Mowinyl 590N is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and good anticorrosion properties, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 650 | Nippon Gohsei | Mowinyl 650 is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. With good adhesion to polyolefin substrates, this product is well suited for use in packaging adhesive applications. | |
| Mowinyl 6610 | Nippon Gohsei | Mowinyl 6610 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Crosslinkable by isocyanate and featuring good mechanical stability, this product is well suited for use in woodworking adhesive and laminate applications. | |
| Mowinyl 6720 | Nippon Gohsei | Mowinyl 6720 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to films and topcoats, this product is well suited for use in primer and sealer applications. | |
| Mowinyl 743N | Nippon Gohsei | Mowinyl 743N is a synthetic acrylic resin emulsion that provides good adherence and alkaline resistance. This product is well suited for use in primers, sealers, paints, and coatings. | |
| Mowinyl 745 | Nippon Gohsei | Mowinyl 745 is a synthetic acrylic resin emulsion with an added auxiliary filming agent. This product is well suited for use in clear coats, sealers, and gloss varnishes for paper. | |
| Mowinyl 760H | Nippon Gohsei | Mowinyl 760H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring has good adhesion with plastics and synthetic fibers, this product is well suited for use in laminate and bookbinding adh...voir plus Mowinyl 760H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring has good adhesion with plastics and synthetic fibers, this product is well suited for use in laminate and bookbinding adhesive applications. voir moins | |
| Mowinyl 761HG | Nippon Gohsei | Mowinyl 761HG is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring good mechanical stability, this product is well suited for use in packaging adhesive and laminate applications. | |
| Mowinyl 763 | Nippon Gohsei | Mowinyl 763 is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. With good adhesion properties, this product is well suited for use in textile and paper laminate applications. | |
| Mowinyl 771H | Nippon Gohsei | Mowinyl 771H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring good initial adhesion and heat resistance, this product is well suited for use in woodworking, plywood, and canvas wood f...voir plus Mowinyl 771H is a water-based synthetic resin emulsion composed of a vinyl acetate/acrylic copolymer. Self-crosslinking and featuring good initial adhesion and heat resistance, this product is well suited for use in woodworking, plywood, and canvas wood filling adhesive applications. voir moins | |
| Mowinyl 7980 | Nippon Gohsei | Mowinyl 7980 is a synthetic acrylic resin emulsion that provides good heat sealing properties, transparency, and adhesion to plastics. This product is well suited for use in film and label adhesive applications. | |
| Mowinyl 880 | Nippon Gohsei | Mowinyl 880 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring good miscible stability with colloidal silica, this product is well suited for use in clear coat and sealer applications. | |
| Mowinyl 940 | Nippon Gohsei | Mowinyl 940 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to base materials, this product is well suited for use in primer and sealer applications. | |
| Mowinyl 987B | Nippon Gohsei | Mowinyl 987B is a synthetic acrylic resin emulsion that provides good adhesion to heat-resistant and water-resistant materials. This product is well suited for use in aluminum foil and paper laminate applications. | |
| Mowinyl A24EN | Nippon Gohsei | Mowinyl A24EN is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and good winter functionality, this product is well suited for use in packaging and paper adhesive applications. | |
| Mowinyl A29 J5 | Nippon Gohsei | Mowinyl A29 J5 is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and all-season functionality, this product is well suited for use in packaging and paper adhesive applications. | |
| Mowinyl A29J3-A | Nippon Gohsei | Mowinyl A29J3-A is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, a longer open time, and low viscosity, this product is well suited for use in packaging and paper adhesive applications. | |
| Mowinyl D025N | Nippon Gohsei | Mowinyl D025N is a water-based synthetic resin emulsion composed of vinyl acetate. With good mechanical stability and water resistance, this product is well suited for use in bookbinding and backlining adhesive applications. | |
| Mowinyl DC | Nippon Gohsei | Mowinyl DC is a water-based synthetic resin emulsion composed of vinyl acetate. It has good compatibility with electrolytes and saline, as well as good water resistance and heat sealing properties. This product is well suited for use in adhesive applicati...voir plus Mowinyl DC is a water-based synthetic resin emulsion composed of vinyl acetate. It has good compatibility with electrolytes and saline, as well as good water resistance and heat sealing properties. This product is well suited for use in adhesive applications. voir moins | |
| Mowinyl DC02 | Nippon Gohsei | Mowinyl DC02 is a water-based synthetic resin emulsion composed of vinyl acetate. It features high solids content, good compatibility with electrolytes and saline, and good water resistance and mechanical stability. This product is well suited for use in ...voir plus Mowinyl DC02 is a water-based synthetic resin emulsion composed of vinyl acetate. It features high solids content, good compatibility with electrolytes and saline, and good water resistance and mechanical stability. This product is well suited for use in packaging adhesive and laminate applications. voir moins | |
| Mowinyl DHP1 | Nippon Gohsei | Mowinyl DHP1 is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion and heat resistance, this product is well suited for use in woodworking adhesive applications. | |
| Mowinyl DLR1 | Nippon Gohsei | Mowinyl DLR1 is a water-based synthetic resin emulsion composed of vinyl acetate. With good initial adhesion, this product is well suited for use in woodworking adhesive applications. | |
| Mowinyl DS5 | Nippon Gohsei | Mowinyl DS5 is a water-based synthetic resin emulsion composed of a vinyl acetate/malate copolymer. With good adherence to plastic substrates, this product is well suited for use in plastic and paper laminate applications. |
