Commercial: Active

E45329 - SABIC INNOVATIVE PLASTICS B V

Download Document

Europe

Appliances

Also Available In, Density / Specific Gravity, Density, Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Molding Shrinkage, Water Absorption Sat/23C, Water Absorption 23C/50RH, Outdoor Suitability, Tensile Modulus, Tensile Modulus, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Stress, Flexural Strength at Yield, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Instrumented Dart Impact, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (0.45 MPa) Annealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, DTUL (1.80 MPa) Annealed, Vicat Softening Temperature, Vicat Softening Temperature, Ball Pressure Test, CLTE, Flow (TMA), Coefficient of Linear Thermal Expansion, Flow, CLTE, Transverse (TMA), Coefficient of Linear Thermal Expansion, Transverse, Comparative Tracking Index (CTI), Comparative Tracking Index, High Amp Arc Ignition (HAI), Hot-wire Ignition (HWI), Flame Rating, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Oxygen Index, Drying Temperature, Drying Time, Suggested Max Moisture, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature