Selenis Maven MS 105 is a copolyester with a slow crystallisation rate and is suitable for the extrusion of heavy gauge sheets, allowing for thicknesses up to 2 mm, without crystallisation occurring. Selenis Maven MS 105 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge colour are required. Selenis Maven MS 105 is recommended when a combination of decorative capability, enhanced graphics, good impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents, are essential. Selenis Maven MS 105 is easy to process on standard extrusion lines. Sheets made with Selenis Maven MS 105 may be personalised though different methods of decoration, due to its inherent surface tension. Selenis Maven MS 105 is BPA and styrene free and is fully recyclable code 1.

Selenis Maven MS 110 Ge is a copolyester with a slow crystallisation rate and is suitable for the extrusion of heavy gauge sheets, allowing for thicknesses up to 6mm, without crystallisation occurring. Selenis Maven MS 110 Ge is the most adequate solution for flat sheets up to this thickness range, when excelent clarity, surface gloss, and neutral edge colour are required. Selenis Maven MS 110 Ge is recommended when a combination of decorative capability, enhanced graphics, good impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents, are essential. Selenis Maven MS 110 Ge is easy to process on standard extrusion lines. Sheets made with Selenis Maven MS 110 Ge may be personalised though different methods of decoration, due to its inherent surface tension. Selenis Maven MS 110 Ge is BPA and styrene free, and is fully recyclable code 1.

Selenis Maven MS 110 is a copolyester with a slow crystallisation rate and is suitable for the extrusion of heavy gauge sheets, allowing for thicknesses up to 4mm, without crystallisation occurring. Selenis Maven MS 110 is the most economic solution for flat sheets up to this thickness range, when good clarity, surface gloss, and neutral edge colour are required. Selenis Maven MS 110 is recommended when a combination of decorative capability, enhanced graphics, good impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents, are essential. Selenis Maven MS 110 is easy to process on standard extrusion lines. Sheets made with Selenis Maven MS 110 may be personalised though different methods of decoration, due to its inherent surface tension. Selenis Maven MS 110 is BPA and styrene free and is fully recyclable code 1.

Selenis Maven NF 300 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gauge sheets, allowing for high thicknesses without crystallisation occurring. Selenis Maven NF 300 is a very economical polymer for this highly competitive market environment. In competition with other polymers frequently used in the heavy gauge sheet business such as Polycarbonate, PMMA and Polystyrene Selenis Maven NF 300 is sensibly priced while featuring excellent clarity, good surface gloss, and a practically neutral edge colour. Selenis Maven NF 300 is recommended when a demanding performance and outstanding toughness are essential, such as, good impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 300 may be down-gauged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 300 is easy to process on standard extrusion lines up to 6mm. Sheets made with Selenis Maven NF 300 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalised though different methods of decoration. All Maven grades are BPA and styrene free.

Selenis Maven NF 411 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gauge sheets, allowing for high thicknesses without crystallization occurring. Selenis Maven NF 411 is the best possible solution when exceptional clarity, surface gloss, and neutral edge colour are required. Selenis Maven NF 411 is recommended when a very demanding performance and outstanding toughness are essential, such as, maximum impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 411 may be down-gauged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 411 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 411 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalized though different methods of decoration. All Maven grades are BPA and styrene free.

Selenis Maven NF 421 is an amorphous copolyester that has been specifically developed for the extrusion of heavy gauge sheets, allowing for high thicknesses without crystallisation occurring. Selenis Maven NF 421 is the best possible solution when exceptional clarity, surface gloss, and neutral edge colour are required. Selenis Maven NF 421 is recommended when a very demanding performance and outstanding toughness are essential, such as, ultimate impact strength at low temperatures and good chemical resistance to detergents and other household cleaning agents. Thanks to its inherent toughness, sheets produced from Selenis Maven NF 421 may be down-gauged without compromising performance. Cost-savings are possible given that there is no need to pre-dry the sheets. Selenis Maven NF 421 is easy to process on standard extrusion lines. Sheets made with Selenis Maven NF 421 may be easily thermoformed, cold-bent, drilled, sawed, screwed, adhesive bonded, routed and personalised though different methods of decoration. All Maven grades are BPA and styrene free.