| Burez® K79 | Lawter | Burez® K79 is a potassium soap of modified rosin with 80% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier for water-based adhesives. | |
| Burez® NA18 502D | Lawter | Burez® NA18 502D is a sodium soap of stabilized rosin with 18% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system as well as in adhesives, particularly bottle labeling, in ad...展开 Burez® NA18 502D is a sodium soap of stabilized rosin with 18% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system as well as in adhesives, particularly bottle labeling, in addition to uses in pigment resination. 收起 | |
| Burez® NA40 502D | Lawter | Burez® NA40 502D is a sodium soap of stabilized rosin with 40% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with added applications in pigment resination and adhesives. | |
| Burez® NK25 502D | Lawter | Burez® NK25 502D is a potassium soap of stabilized rosin with 25% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with applications also in adhesives and pigment resinatio...展开 Burez® NK25 502D is a potassium soap of stabilized rosin with 25% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with applications also in adhesives and pigment resination. 收起 | |
| Burez® NK40 502D | Lawter | Burez® NK40 502D is a sodium and potassium soap of stabilized rosin with 40% solids, good stability and a low level of unsaponifiables. It is mostly used as an emulsifier in the emulsion polymerization system, in pigment resination and in additives. | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Eco-Rez™ 350 C | Lawter | Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealan...展开 Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealants and heat resistant inks. 收起 | |
| Epoxies® 10-2055I | Epoxies, Etc. | Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I pro...展开 Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2055P | Epoxies, Etc. | Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P pro...展开 Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2055PHV | Epoxies, Etc. | Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV...展开 Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2080I | Epoxies, Etc. | Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produc...展开 Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2080P | Epoxies, Etc. | Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produc...展开 Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-2080PHV | Epoxies, Etc. | Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV pr...展开 Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. 收起 | |
| Epoxies® 10-3002 | Epoxies, Etc. | Epoxies® 10-3002 is a clear, high bond strength, high viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handl...展开 Epoxies® 10-3002 is a clear, high bond strength, high viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenience for the end user. 10-3002 yields high peel strength and excellent tensile strength with thermal shock, impact and vibration resistance. 收起 | |
| Epoxies® 10-3003 | Epoxies, Etc. | Epoxies® 10-3003 is a clear, high bond strength epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenien...展开 Epoxies® 10-3003 is a clear, high bond strength epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenience for the end user. 10-3003 yields high peel strength and excellent tensile strength with thermal shock, impact and vibration resistance. 收起 | |
| Epoxies® 10-3004 NC | Epoxies, Etc. | Epoxies® 10-3004 NC is a clear, high bond strength, low viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in han...展开 Epoxies® 10-3004 NC is a clear, high bond strength, low viscosity, epoxy adhesive with outstanding physical, thermal, and electrical insulation properties. It has a non-critical mix ratio and adjustable flexibility that has been formulated for ease in handling and convenience for the end user. 10-3004 NC yields high peel strength and excellent tensile strength with thermal shock, impact and vibration resistance. 收起 | |
| Epoxies® 10-3005 | Epoxies, Etc. | Epoxies® 10-3005 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water,...展开 Epoxies® 10-3005 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3005 can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. 收起 | |
| Epoxies® 10-3005 NS | Epoxies, Etc. | Epoxies® 10-3005 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great...展开 Epoxies® 10-3005 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 5 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3005 NS can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. 收起 | |
| Epoxies® 10-3008 | Epoxies, Etc. | Epoxies® 10-3008 is a two part, high performance structural epoxy adhesive made of a grey resin and a beige catalyst. It is a flexible adhesive with outstanding lap shear and peel strength and has a great choice for bonding substrates of differing coeffic...展开 Epoxies® 10-3008 is a two part, high performance structural epoxy adhesive made of a grey resin and a beige catalyst. It is a flexible adhesive with outstanding lap shear and peel strength and has a great choice for bonding substrates of differing coefficients of thermal expansion. Epoxies® 10-3008 is well suited for applications requiring impact and vibration resistance. 收起 | |
| Epoxies® 10-3012 | Epoxies, Etc. | Epoxies® 10-3012 is a clear, high strength, fast setting epoxy adhesive and potting compound that is formulated for high clarity, good impact strength and water resistance. Epoxies® 10-3012 suited for a wide range of jewelry, industrial, structural and el...展开 Epoxies® 10-3012 is a clear, high strength, fast setting epoxy adhesive and potting compound that is formulated for high clarity, good impact strength and water resistance. Epoxies® 10-3012 suited for a wide range of jewelry, industrial, structural and electrical applications. This adhesive is an excellent choice for field repairs. 收起 | |
| Epoxies® 10-3020 | Epoxies, Etc. | Epoxies® 10-3020 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water...展开 Epoxies® 10-3020 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3020 can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. 收起 | |
| Epoxies® 10-3020 NS | Epoxies, Etc. | Epoxies® 10-3020 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with grea...展开 Epoxies® 10-3020 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 20 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3020 NS can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. 收起 | |
| Epoxies® 10-3044 | Epoxies, Etc. | Epoxies® 10-3044 is a fast curing, two part epoxy adhesive and sealant with great chemical and heat resistance. It is widely used as a stencil and screen adhesive due to its bonding strength and toughness. Epoxies® 10-3044 is well suited to bond polyester...展开 Epoxies® 10-3044 is a fast curing, two part epoxy adhesive and sealant with great chemical and heat resistance. It is widely used as a stencil and screen adhesive due to its bonding strength and toughness. Epoxies® 10-3044 is well suited to bond polyester mesh to aluminum frames and for the bonding of stainless steel foil to polyester mesh. 收起 | |
| Epoxies® 10-3046 | Epoxies, Etc. | Epoxies® 10-3046 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water...展开 Epoxies® 10-3046 is a clear, low viscosity, high bond strength, epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3046 can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. 收起 | |
| Epoxies® 10-3046 NS | Epoxies, Etc. | Epoxies® 10-3046 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with grea...展开 Epoxies® 10-3046 NS is a semi-transparent, high bond strength, non-sag epoxy adhesive with a quick setting time of 46 minutes at room temperature. It is well suited for a wide range of electronic, industrial, structural and jewelery applications with great water, chemical and shock resistance. Epoxies® 10-3046 NS can be used to bond plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. 收起 | |
| Epoxies® 10-3062 | Epoxies, Etc. | Epoxies® 10-3062 is a two part epoxy potting compound and adhesive made of a clear resin and an amber curing agent. This product is well suited encapsulating electronics and electrical equipment and can provide good water resistance, adhesion, and toughne...展开 Epoxies® 10-3062 is a two part epoxy potting compound and adhesive made of a clear resin and an amber curing agent. This product is well suited encapsulating electronics and electrical equipment and can provide good water resistance, adhesion, and toughness. 收起 | |
| Epoxies® 10-3216 | Epoxies, Etc. | Epoxies® 10-3216 is a toughened, flexible, and impact resistant epoxy adhesive. it is a two component system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 is excellent f...展开 Epoxies® 10-3216 is a toughened, flexible, and impact resistant epoxy adhesive. it is a two component system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 is excellent for bonding many metals and woods, most plastics and rubbers and masonry products. This system is designed for electronic, aerospace and other demanding industrial applications. 收起 | |
| Epoxies® 10-3216 TR | Epoxies, Etc. | Epoxies® 10-3216 TR is a translucent, flexible, and impact resistant unfilled epoxy adhesive. It is a two part system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 TR is...展开 Epoxies® 10-3216 TR is a translucent, flexible, and impact resistant unfilled epoxy adhesive. It is a two part system that forms strong structural bonds at room temperature. This unique adhesive system provides high peel and shear strengths. 10-3216 TR is excellent for bonding many metals and woods, most plastics and rubbers and masonry products. This system is designed for electronic, aerospace and other demanding industrial applications. 收起 | |
| Epoxies® 10-3713 | Epoxies, Etc. | Epoxies® 10-3713 is a two part, very strong and clear epoxy adhesive designed for a variety of bonding applications. Formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy it forms a crystal clear bond line. 10-3713 is...展开 Epoxies® 10-3713 is a two part, very strong and clear epoxy adhesive designed for a variety of bonding applications. Formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy it forms a crystal clear bond line. 10-3713 is low in viscosity and therefore offers maximum wetting and penetration of substrates and is well suited to be used anywhere a clear, strong bond is required. 收起 | |
| Epoxies® 10-3782 | Epoxies, Etc. | Epoxies® 10-3782 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a very low viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, ma...展开 Epoxies® 10-3782 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a very low viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic bonding applications. It can be used anywhere a tough indestructible bond is required. Epoxies® 10-3782 is well suited for use with a variety of substrates including metals, ceramics, wood, magnets, plastics, glass, etc. 收起 | |
| Epoxies® 10-3783 | Epoxies, Etc. | Epoxies® 10-3783 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a medium viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magn...展开 Epoxies® 10-3783 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated with a medium viscosity. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic bonding applications. It can be used anywhere a tough indestructible bond is required. Epoxies® 10-3783 is well suited for use with a variety of substrates including metals, ceramics, wood, magnets, plastics, glass, etc. 收起 | |
| Epoxies® 10-3784 | Epoxies, Etc. | Epoxies® 10-3784 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated as a non-sag paste. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic ...展开 Epoxies® 10-3784 is a one part, heat cured epoxy adhesive. Grey in color, it is made of a fast setting materials formulated as a non-sag paste. Primarily used in a variety of electronic bonding and potting applications, filer end cap assemblies, magnetic bonding applications. It can be used anywhere a tough indestructible bond is required. Epoxies® 10-3784 is well suited for use with a variety of substrates including metals, ceramics, wood, magnets, plastics, glass, etc. 收起 | |
| Epoxies® 20-3004 HV | Epoxies, Etc. | Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates incl...展开 Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's high viscosity prevents sagging and is noncorrosive. 收起 | |
| Epoxies® 20-3004 LV | Epoxies, Etc. | Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates inclu...展开 Epoxies® 20-3004 LV is a low viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's low viscosity lends itself to being a self leveling system and is noncorrosive. 收起 | |
| Epoxies® 20-3064 NC | Epoxies, Etc. | Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3...展开 Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. 收起 | |
| Epoxies® 20-3064 NC LV | Epoxies, Etc. | Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Sho...展开 Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. 收起 | |
| Epoxies® 20-3068 | Epoxies, Etc. | Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with...展开 Epoxies® 20-3068 is a two part epoxy adhesive and potting compound that can cure in room temperatures and has excellent chemical and corrosion resistance. This product provides good water resistance, adhesion, and toughness and is well suited for use with most electronics. 20-3068 Epoxy System meets the Food and Drug Administration (FDA) regulations permitting use in “indirect” food contact applications. The raw materials used in the products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections 175.105 and 175.300. 收起 | |
| Epoxies® 20-3236 | Epoxies, Etc. | Epoxies® 20-3236 is a low viscosity, copolymer elastomer made of a modified epoxy resin that is specifically designed for bonding vinyls and neoprenes. It can be used in many difficult bonding applications and has an extended working time with a convenien...展开 Epoxies® 20-3236 is a low viscosity, copolymer elastomer made of a modified epoxy resin that is specifically designed for bonding vinyls and neoprenes. It can be used in many difficult bonding applications and has an extended working time with a convenient 2:1 mix ratio. 20-3236 Resin can also be used for the encapsulation of vinyl insulated electrical components or sealing vinyl lead wires. 收起 | |
| Epoxies® 20-3302 | Epoxies, Etc. | Epoxies® 20-3302 is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excel...展开 Epoxies® 20-3302 is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excellent optical transmission along with outstanding adhesion and electrical properties. 20-3302 is a low viscosity system designed for L.E.D. encapsulating, fiber optics, and any potting or adhesive application requiring a bubble free and glass smooth finish with optimum clarity. 收起 | |
| Epoxies® 20-3302NCLV | Epoxies, Etc. | Epoxies® 20-3302NCLV is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides e...展开 Epoxies® 20-3302NCLV is a two part, water clear, optically transparent epoxy potting compound and adhesive. This high purity grade polymer system is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. It provides excellent optical transmission along with outstanding adhesion and electrical properties. 20-3302NCLV is a very low viscosity system designed for L.E.D. encapsulating, fiber optics, and any potting or adhesive application requiring a bubble free and glass smooth finish with optimum clarity. 收起 | |
| Epoxies® 40-3900 | Epoxies, Etc. | Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic...展开 Epoxies® 40-3900 is a two part, silver filled, epoxy resin adhesive that is electrically conductive and has a very low resistance value of less than 1x10-4 ohm-cm. 40-3900 is specifically designed for adhesive bonding in microelectronic and optoelectronic applications. Due to its excellent continuity, it has also been used extensively in applications such as micro-wave EMI and RFI shielding, in the assembly or repair of printed circuit boards, wave guides, electronic modules, flat cable, high frequency shields, connectors, circuitry, and as a cold solder. 收起 | |
| Epoxies® 40-3905 | Epoxies, Etc. | Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epo...展开 Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epoxy filled with pure silver for improved electrical conduction and heat transfer. It has outstanding adhesion to plastics, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic, and printed circuit boards. 40-3905 can also be thinned with up to 10% Toluol for many coating applications. 收起 | |
| Epoxies® 40-3909 | Epoxies, Etc. | Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternat...展开 Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternative to many silver filled epoxy systems. 40-3909 has a convenient 1:1 mix ratio by weight and can cure at room temperature overnight but can also be accelerated with mild heat. It is well suited for use in the assembly or repairs of printed circuit boards, connectors, wave guides, high frequency shields, and as a cold solder. 收起 | |
| Epoxies® 40-3911 | Epoxies, Etc. | Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part ...展开 Epoxies® 40-3911 is an electrically conductive, silver filled, epoxy adhesive that is formulated without solvents and is 100% solids. Because of it is highly filled with silver, it has a very low volume resistance rating of 5 X 10-4 ohm-cm. This one part system cures quickly at elevated temperatures making it a suitable adhesive for many electronic assembly operations. And it is a good choice for lid sealing and die bonding applications. 收起 | |
| Epoxies® 50-3112 | Epoxies, Etc. | Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature ...展开 Epoxies® 50-3112 is a two part, fast curing thermally conductive epoxy adhesive. Dark grey in color when mixed, this product a simple 1:1 mix ratio and develops a 1,400 psi Lap Shear strength bond (aluminum to aluminum) in four hours at room temperature and 2,200 psi. just after 20 hours. 50-3112 offers fast heat dissipation for a wide range of electronic applications. The black resin and white hardener provide an excellent visual indication of a complete mix. 收起 | |
| Epoxies® 50-3122 | Epoxies, Etc. | Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electri...展开 Epoxies® 50-3122 is a one part epoxy adhesive with both high sheer and high peel strength properties. It is also able to maintain exceptionally strong bonds over a wide temperature range of -60 to +205°C. 50-3122 is both a thermally conductive and electrically insulating epoxy adhesive. It is suitable for electronic, electrical, aerospace, appliance, automotive and industrial applications. 收起 | |
| Epoxies® 50-3186 NC | Epoxies, Etc. | Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...展开 Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. 收起 | |
| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...展开 Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Pinerez® 1290 | Lawter | Pinerez® 1290 is a tackifier resin with a moderate softening point and broad compatibility which helps it function as a tackifier in hot melt adhesives and solvents. The product is part of a series of Pinerez® tackifier resins which are recommended to boo...展开 Pinerez® 1290 is a tackifier resin with a moderate softening point and broad compatibility which helps it function as a tackifier in hot melt adhesives and solvents. The product is part of a series of Pinerez® tackifier resins which are recommended to boost the adhesive performance not only of hot melt adhesives and solvent-based adhesives, but to aid in sealants and water-based flooring adhesives as well. 收起 | |
| Pinerez® 2010LV | Lawter | Pinerez® 2010LV is a liquid rosin ester with a highly stabilized rosin ester that has a low odor, is light in color and displays a low viscosity at ambient temperatures. It is used in water-based, hot melt and solvent-based adhesives. | |
| Pinerez® 2110 | Lawter | Pinerez® 2110 is a tackifier resin with a light color and moderate softening point which shows broad compatibility and helps to improve adhesion to difficult surfaces like PET. The product is part of a series of Pinerez® tackifier resins which are recomme...展开 Pinerez® 2110 is a tackifier resin with a light color and moderate softening point which shows broad compatibility and helps to improve adhesion to difficult surfaces like PET. The product is part of a series of Pinerez® tackifier resins which are recommended to boost the adhesive performance not only of hot melt adhesives and solvent-based adhesives, but to aid in sealants and water-based flooring adhesives as well. 收起 | |
| Pinerez® 2260 | Lawter | Pinerez® 2260 is a tackifier resin with a highly stabilized rosin ester that has a low odor and a medium to high softening point. It is used as a tackifier in hot melt and solvent-based adhesives. | |
| Pinerez® 2400M | Lawter | Pinerez® 2400M is a tackifier resin with a highly stabilized rosin ester that has a medium to high softening point with good color and viscosity stability. It is ideal in hot melt formulations for road markings. | |
| Pinerez® 2410 | Lawter | Pinerez® 2410 is a tackifier resin that is highly stabilized with a low odor and color and a medium to high softening point. It is used as a tackifier in hot melt and solvent-based adhesives. | |
| Pinerez® LE4014 | Lawter | Pinerez® LE4014 is a liquid rosin ester that helps to boost adhesion in water-based flooring adhesives, while also acting as a plasticizer resin together with harder resins. | |
| Reactol™ 1717 H C | Lawter | Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds...展开 Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds, melamines, chlorinated rubber and polyamide resins. The product is used in rotogravure and flexographic inks, laminating inks, primer coatings, cellulose lacquers and adhesives. 收起 | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide NY-102 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide SP-106 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide TL-104 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide XJ-100 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide XJ-101 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide ZZ-108 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings. | |
| Snowtack® 776A | Lawter | Snowtack® 776A is a tackifier resin with a solid content of 50% and performs as a standard purpose ester grade for acrylic polymers and SBR. It is part of the series of Snowtack® tackifier resins created for the needs of surface coating and adhesives indu...展开 Snowtack® 776A is a tackifier resin with a solid content of 50% and performs as a standard purpose ester grade for acrylic polymers and SBR. It is part of the series of Snowtack® tackifier resins created for the needs of surface coating and adhesives industries. 收起 | |
| Snowtack® 790G | Lawter | Snowtack® 790G is a tackifier resin with 57% solid content and is designed to boost cohesive strength and water resistance. It is part of the series of Snowtack® tackifier resins created for the needs of the adhesive and surface coating industries. | |
| Snowtack® SE100G | Lawter | Snowtack® SE100G is a high softening point tackifier for PSA adhesives that are used in labels and tape applications that need good mandrel performance. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the n...展开 Snowtack® SE100G is a high softening point tackifier for PSA adhesives that are used in labels and tape applications that need good mandrel performance. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhesives industries. 收起 | |
| Snowtack™ SE724G | Lawter | Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...展开 Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. 收起 | |
| Snowtack® SE772A | Lawter | Snowtack® SE772A is a tackifier resin with 50% solids and functions as a standard purpose ester grade for acrylic polymers and SBR, with the added benefit of staging a good low temperature performance. The product is part of a series of Snowtack® tackifie...展开 Snowtack® SE772A is a tackifier resin with 50% solids and functions as a standard purpose ester grade for acrylic polymers and SBR, with the added benefit of staging a good low temperature performance. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhesives industries. 收起 | |
| Snowtack™ SE780G | Lawter | Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...展开 Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. 收起 | |
| Snowtack® SE790 | Lawter | Snowtack® SE790 is a tackifier resin with 57% solids and is designed to improve water resistance and cohesive strength. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhes...展开 Snowtack® SE790 is a tackifier resin with 57% solids and is designed to improve water resistance and cohesive strength. The product is part of a series of Snowtack® tackifier resins created for the purpose of serving the needs of surface coating and adhesives industries. 收起 | |
| UV Cure 60-7105 | Epoxies, Etc. | UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. Thi...展开 UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for products requiring deep section curing. 收起 | |
| UV Cure 60-7108 | Epoxies, Etc. | UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...展开 UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. 收起 | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...展开 UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. 收起 | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...展开 UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. 收起 | |
| UV Cure 60-7155 | Epoxies, Etc. | UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...展开 UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. 收起 | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...展开 UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. 收起 | |
| UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for...展开 UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. 收起 | |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...展开 UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. 收起 | |
| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...展开 UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. 收起 |
