| Bitoner® C5 Resin BT-2104 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wa...展开 Bitoner® C5 Resin BT-2104, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with a wide range of polymers, good thermal stability, low wax cloud point, low odor, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. 收起 | |
| Bitoner® C9 Resin BP-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low...展开 Bitoner® C9 Resin BP-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with SAS, EVA, and other polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-100 has recommended applications in sealants, shoe adhesives, rubber, coatings, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展开 Bitoner® C9 Resin BP-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-120 has recommended applications in sealants, solvent based adhesives, rubber, coatings, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-140 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, lo...展开 Bitoner® C9 Resin BP-140, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with resins and polymers, good thermal resistance, low odor, low VOC, and water resistance. BP-140 has recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, asphalt modification, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent...展开 Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 收起 | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...展开 Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 收起 | |
| Bitoner® Hydrogenated C9 Resins H-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS...展开 Bitoner® Hydrogenated C9 Resins H-120, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-120 has recommended applications in solvent adhesives, hot melt adhesives, and wax modification. 收起 | |
| Bitoner® Resin BA-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water res...展开 Bitoner® Resin BA-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin obtained from petroleum-derived monomers. It has good compatibility with other polymers and resins, good thermal resistance, water resistance, low odor, and very low VOC. BA-120 has recommended applications in sealants, rubber, coatings, printing ink, hot melt adhesive, and solvent based adhesives. 收起 | |
| Bitoner® Resin BT-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in th...展开 Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, rubber, sealants, and hot melt adhesives. 收起 | |
| Bitoner® Resin BT-1102 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in t...展开 Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, coatings, sealants, and hot melt adhesives. 收起 | |
| Bitoner® Resin BT-1200H | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-1200H, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with APAO, NR, and other polymers, good thermal stability, low ...展开 Bitoner® Resin BT-1200H, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with APAO, NR, and other polymers, good thermal stability, low odor, low volatility, and water resistance. BT-1200H has recommended applications in sealants, wax modifications, asphalt modification, rubber, coatings, and hot melt adhesives. 收起 | |
| Bitoner® Resin BT-2110 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-2110, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with polymers and SIS, low wax cloud point, good thermal stabili...展开 Bitoner® Resin BT-2110, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin obtained from petroleum-derived monomers. It has good compatibility with polymers and SIS, low wax cloud point, good thermal stability, low odor, low volatility, and water resistance. BT-2104 has recommended applications in solvent based PSA, sealants, coatings, hot melt adhesives, and HMPSA. 收起 | |
| Bitoner® Resin C-2120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended a...展开 Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 收起 | |
| Bitoner® Resin C-2125 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended a...展开 Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 收起 | |
| Bitoner® Resin C2130 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot m...展开 Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| Bitoner® Resin DH-1110 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and...展开 Bitoner® Resin DH-1110, in the form of a white granular, is a thermoplastic resin obtained from hydrogenation and polymerization of cyclic ingredients such as derived monomers. It has good heat stability, good initial color, low VOC, water resistance, and good compatibility. DH-1110 has recommended applications in hot melt adhesives, sealants, pressure sensitive adhesives, and wax modifications. 收起 | |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications...展开 Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 收起 | |
| Bitoner® Resin TR-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appli...展开 Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| Bitoner® Resin TR-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appl...展开 Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| Bitoner® Resin TR-2080 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended app...展开 Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 收起 | |
| Brassylic Acid (DC13T) | Cathay Industrial Biotechnology | Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high ...展开 Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high performance polyamides/nylon, hot melt adhesives, and more. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Formaldehyde | Nanjing Shuguang Chemical Group | Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| KH-540 (SG-Si 1110) | Nanjing Shuguang Chemical Group | KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-550 (SG-Si 1100) | Nanjing Shuguang Chemical Group | KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-560 (SG-Si 187) | Nanjing Shuguang Chemical Group | KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起 | |
| KH-570 (SG-Si 174) | Nanjing Shuguang Chemical Group | KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起 | |
| Pure Mix | Cathay Industrial Biotechnology | Pure Mix, in the form of a white to off-white powder or flake, is a mixture of sebacic acid, undecanedioic acid, dodecanedioic acid, brassylic, tetradecanedioic acid, and has applications in corrosion inhibitor and adhesive crosslinker. | |
| SG-Si 151 | Nanjing Shuguang Chemical Group | SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fibergl...展开 SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fiberglass or inorganic siliceous fibers. 收起 | |
| SG-Ti 502 | Nanjing Shuguang Chemical Group | SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and gloss...展开 SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and glossy surfaces on glass, metal, filler, and pigments. 收起 | |
| SG-Zr 802 | Nanjing Shuguang Chemical Group | SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展开 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起 | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide NY-102 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide SP-106 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide TL-104 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide XJ-100 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide XJ-101 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide ZZ-108 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings. | |
| Tetrabutyl Titanate | Anhui Taichang Chemical Co., Ltd. | Tetrabutyl Titanate is a chemical intermediate. This product appears as a pale yellow, oily liquid that can be used as a heat resistant additive in coatings and adhesives. It can be used as a crosslinking agent and condensation reaction catalyst. | |
| Tetradecanedioic Acid (DC14S) | Cathay Industrial Biotechnology | Tetradecanedioic Acid (DC14S), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)12COOH. It has recommended applications i...展开 Tetradecanedioic Acid (DC14S), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)12COOH. It has recommended applications in polyamide and polyester resins, plasticizer diesters, powder coatings, hot melt adhesives, and more. 收起 | |
| Undecanedioic Acid (DC11P) | Cathay Industrial Biotechnology | Undecanedioic Acid (DC11P), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)nCOOH. It has recommended applications in co...展开 Undecanedioic Acid (DC11P), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)nCOOH. It has recommended applications in corrosion inhibitors, hot melt adhesives, high performance polyamides/Nylon, and more. 收起 | |
| Undecanedioic Acid (DC12S) | Cathay Industrial Biotechnology | Undecanedioic Acid (DC12S), in the form of a white powder, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)10COOH. It has recommended applications in corrosion ...展开 Undecanedioic Acid (DC12S), in the form of a white powder, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)10COOH. It has recommended applications in corrosion inhibitors, hot melt adhesives, polyamide and polyester resins, powder coatings, plasticizer diesters, and more. 收起 | |
| Vinyl Polymer Resin (VAH) ELT-VAAL | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product pr...展开 Vinyl Polymer Resin (VAH) ELT-VAAL is a white or slight yellow powder which has a high molecular weight. This product has a molecular weight of 25000 and is also crosslinkable with amino resins, polyisocyanates, and other generic resins. This product provides blocking resistance, sand-ability, adhesion, and resistance to paint, coatings, adhesives, and inks. 收起 | |
| Vinyl Polymer Resin VAM Resin | Anhui Elite Industrial Co., Ltd | Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to...展开 Vinyl Polymer Resin VAM Resin is a white powder with a high molecular weight. This product has a viscosity between 40 and 48 and is also approved for food contact applications by the FDA. Vinyl Polymer Resin VAM Resin provides flexibility and adhesion to paint, coatings, adhesives, and inks. 收起 |
