| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展开 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起 | |
| 3-(Trimethoxysilyl)propyl Glycidyl Ether | Penpet Petrochemical Trading GmbH | 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled...展开 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled or glass-reinforced thermosets and thermoplastics. 收起 | |
| A65 Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construc...展开 A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construction, and paper industries, ect. A65 can be used to provide excellent external and internal lubrication in most plastic processes. 收起 | |
| Adipic Acid | Penpet Petrochemical Trading GmbH | Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the syn...展开 Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the synthesis of polyetherpolyole for polyurethane systems and for thermoplastic polyurethane. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Diisodecylphthalate | Penpet Petrochemical Trading GmbH | Diisodecylphthalate, in the form of a colourless and nearly odourless fluid, is an organic compound that can be used in glues, paints, solvents and sealants. This product is normally used as a plasticizer for PVC. | |
| Diisononyl Phthalate (DINP) | Penpet Petrochemical Trading GmbH | Diisononyl Phthalate (DINP), in the form of a colourless and a nearly odourless fluid, is a phthalate and an organic chemical compound that can be used in glues, paints, solvents, and sealants. This product is mostly used as a plasticizer for PVC. | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展开 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| EW-160 Oxidized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | EW-160 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as sign...展开 EW-160 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as significantly improving the lubrication properties of PVC, promote palatalization and improve overall production efficiency and the mechanical strength of the article. 收起 | |
| EW-180 Oxidized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | EW-180 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as sign...展开 EW-180 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as significantly improving the lubrication properties of PVC, promote palatalization and improve overall production efficiency and the mechanical strength of the article. 收起 | |
| Formaldehyde | Nanjing Shuguang Chemical Group | Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起 | |
| Fumaric Acid | Penpet Petrochemical Trading GmbH | Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated pol...展开 Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated polyester resins, and in lubricants. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Hydrogenated Castor Oil HCO | Changxing Xiehe Polymer Co., Ltd. | Hydrogenated castor oil (HCO) is made from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other...展开 Hydrogenated castor oil (HCO) is made from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other industries. 收起 | |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展开 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展开 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| KH-540 (SG-Si 1110) | Nanjing Shuguang Chemical Group | KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-550 (SG-Si 1100) | Nanjing Shuguang Chemical Group | KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-560 (SG-Si 187) | Nanjing Shuguang Chemical Group | KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起 | |
| KH-570 (SG-Si 174) | Nanjing Shuguang Chemical Group | KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起 | |
| MAW-6600 Micronized Polyamine Wax Powder | Changxing Xiehe Polymer Co., Ltd. | MAW-6600 micronized polyamine wax powder is used in solvent-base coating, ink and adhesive. It could improve the scratch resistance of paints and used as coatings’ matting agent, sanding aid, additive for powder coatings, anti-blocking agent for printing ...展开 MAW-6600 micronized polyamine wax powder is used in solvent-base coating, ink and adhesive. It could improve the scratch resistance of paints and used as coatings’ matting agent, sanding aid, additive for powder coatings, anti-blocking agent for printing inks. 收起 | |
| Methylhexahydrophthalic Anhydride | Penpet Petrochemical Trading GmbH | Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also k...展开 Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also known as hexahydromethylphthalic anhydride. 收起 | |
| MEW-3618 Micronized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | MEW-3618 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properti...展开 MEW-3618 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properties matting agent for paints & coatings. As well as a lubricant for plastics especially for high demanding pigment concentrates based on PE and PP (dispersing aid). 收起 | |
| MEW-3628 Micronized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | MEW-3628 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface propert...展开 MEW-3628 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properties matting agent for paints & coatings. As well as a lubricant for plastics especially for high demanding pigment concentrates based on PE and PP (dispersing aid). 收起 | |
| Modified Hydrogenated Castor Oil Rheological Additive RC-HMT | Changxing Xiehe Polymer Co., Ltd. | RC-HMT is a 100% active rheological additive and is generally used for solvent based paints and coatings, adhesives, sealants and lubricant oils. It can provide excellent thickening, thixotropic and sag resistance. It is primarily used in the production o...展开 RC-HMT is a 100% active rheological additive and is generally used for solvent based paints and coatings, adhesives, sealants and lubricant oils. It can provide excellent thickening, thixotropic and sag resistance. It is primarily used in the production of industrial coatings, traffic paints, inks, powder paints, adhesive & sealants and lubricating oils. 收起 | |
| Modified Hydrogenated Castor Oil Rheological Additive RC-HST | Changxing Xiehe Polymer Co., Ltd. | RC-HST is a 100% active organic rheological additive and is made by a special process modification of solvent-based coatings. It is primarily used in the production of inks and adhesives and can effectively provide thixotropy and sag as well as resistance...展开 RC-HST is a 100% active organic rheological additive and is made by a special process modification of solvent-based coatings. It is primarily used in the production of inks and adhesives and can effectively provide thixotropy and sag as well as resistance and prevention of sedimentation. 收起 | |
| Neopentyl Glycol (NPG), Flakes | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Flakes, in the form of a clear flake, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Neopentyl Glycol (NPG), Solution | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Solution, in the form of a 90% solution, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Pentaerythritol | Penpet Petrochemical Trading GmbH | Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a densi...展开 Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a density of 1.396 g/cm3. Its melting point is defined at 260.5°C and its boiling point is at 276°C. 收起 | |
| RC-100 Polyamide Micro-Powder | Changxing Xiehe Polymer Co., Ltd. | RC-100 Polyamide Micro-Powder is a special polyamide wax. The product can be dispersed in the solvent and pre-activated to wax paste. It can be used as rheological additives in solvent based system. RC-100 has some advantages in viscosity control, thixotr...展开 RC-100 Polyamide Micro-Powder is a special polyamide wax. The product can be dispersed in the solvent and pre-activated to wax paste. It can be used as rheological additives in solvent based system. RC-100 has some advantages in viscosity control, thixotropic, sag control and pigment suspension. 收起 | |
| RC-200 Micronized Polyamide Wax | Changxing Xiehe Polymer Co., Ltd. | RC-200 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, ad...展开 RC-200 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, adhesives, sealants and lubricating etc. RC-200 has some advantages in viscosity control, thixotropic, sag control and pigment suspension. 收起 | |
| RC-750 Anti-Settling Agent | Changxing Xiehe Polymer Co., Ltd. | RC-750 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-750 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acry...展开 RC-750 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-750 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is suitable also for wash primer and high solid paints. According to experience, RC-750 cannot be applied to systems containing zinc-powder. 收起 | |
| RC-760 Anti-Settling Agent | Changxing Xiehe Polymer Co., Ltd. | RC-760 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-760 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acry...展开 RC-760 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-760 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is suitable also for wash primer and high solid paints. 收起 | |
| RC-800 Micronized Polyamide Wax | Changxing Xiehe Polymer Co., Ltd. | RC-800 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, ad...展开 RC-800 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, adhesives, sealants and lubricating etc. RC-800 is recommended for solvent based heavy duty paints, specifically Epoxy primers, Chlorinated rubber primers and Alkyds primers. 收起 | |
| RC-820 Polyamide Wax Paste | Changxing Xiehe Polymer Co., Ltd. | RC-820 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigmen...展开 RC-820 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigments in formulation. It is primarily used in acrylic resin paints, unsaturated polyester paints, chlorinated rubber paints, epoxy resin paints, vinyl resin paints, asphalt & tar coatings, acrylic/melamines and urethane resin paints. 收起 | |
| RC-920 Polyamide Wax Paste | Changxing Xiehe Polymer Co., Ltd. | RC-920 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigment...展开 RC-920 Polyamide Wax Paste is a special polyamide wax paste that is pre-activated in organic solvents. The product provides excellent thixotropic, anti-settling and anti-sagging functions; also enhance flake orientation of metallic and pearlescent pigments in formulation. It is primarily used in acrylic resin paints, unsaturated polyester paints, chlorinated rubber paints, epoxy resin paints, vinyl resin paints, asphalt & tar coatings, acrylic/melamines and urethane resin paints. 收起 | |
| SG-Si 151 | Nanjing Shuguang Chemical Group | SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fibergl...展开 SG-Si 151, in the form of a colorless to pale yellow clear liquid, is an ethoxylated vinyl silane coupling agent. This product can be used to cross-link adhesives and in special coating materials. It can also crosslink polyethylene and dip treat fiberglass or inorganic siliceous fibers. 收起 | |
| SG-Ti 502 | Nanjing Shuguang Chemical Group | SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and gloss...展开 SG-Ti 502, in the form of a clear to slightly hazy, colorless to light yellow aqueous liquid, is a titanate coupling agent. This product improves the cross-linking performance for water-borne paints and adhesives. It also makes paint form hard and glossy surfaces on glass, metal, filler, and pigments. 收起 | |
| SG-Zr 802 | Nanjing Shuguang Chemical Group | SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate s...展开 SG-Zr 802, in the form of a yellowish to brown organic liquid, is a zirconate coupling agent. This product can be used in adhesives and printing inks as a catalyst for cross-linking resins, which improves the binding force and adhesion to the substrate surface. It can also be used in the electronic industry as a surface treatment for inorganic minerals to improve the dielectric properties of the composites. 收起 | |
| Silicon Dioxide GJ-103 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase th...展开 Silicon Dioxide GJ-103 is a transparent white powder that provides strength and abrasion resistance. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide JLJ-105 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is...展开 Silicon Dioxide JLJ-105 is a transparent white powder that has large surface area and small average particle size. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide NY-102 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bondin...展开 Silicon Dioxide NY-102 is a white powder that has good dispersion and absorption properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide SP-106 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is a...展开 Silicon Dioxide SP-106 is a transparent white powder that has heavy metal content and strong absorption ability. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide TL-104 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase m...展开 Silicon Dioxide TL-104 is a transparent white powder that is used as a dispersing agent; the liquid form is used as rheology control agent. This product has the purpose of thickening and anti-settling, and is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. 收起 | |
| Silicon Dioxide XJ-100 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-100 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide XJ-101 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide XJ-101 is a white powder that is used as an additive in adhesives to increase mechanical strength. It is also used in paints and coatings to increase the bonding properties. | |
| Silicon Dioxide ZZ-108 | Shanghai Tengmin Industry Co., Ltd. | Silicon Dioxide ZZ-108 is a transparent white powder that has high bulkiness and water-solubility properties. This product has the ability to be used as an additive in adhesives to increase mechanical strength, and it is also used in paints and coatings. | |
| Sodium Formate | Penpet Petrochemical Trading GmbH | Sodium Formate is the sodium salt of formic acid. This product appears as a colourless powder that can be used in printing processes. Its melting point is -94.7 degrees Celsius and it boils between 55.8 and 56.6 degrees C. | |
| Spolapon CS | Enaspol AS | Spolapon CS is a cumenesulfonic acid catalyst with a pasty yellow liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in coatings ...展开 Spolapon CS is a cumenesulfonic acid catalyst with a pasty yellow liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in coatings and the cross-linking of adhesives. 收起 | |
| Spolapon XS | Enaspol AS | Spolapon XS is a xylenesulphonic acid catalyst with a light brown liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in paints or...展开 Spolapon XS is a xylenesulphonic acid catalyst with a light brown liquid appearance that is used in environments where strong acid is required. This product is used in esterfication processes and emulsion breaking as well as polymer reactions in paints or coatings and the cross-linking of adhesives. 收起 | |
| Tetrahydrofurane (THF) | Penpet Petrochemical Trading GmbH | Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and p...展开 Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and polyurethane. 收起 | |
| Tetrahydrophthalic Anhydride (THPA) | Penpet Petrochemical Trading GmbH | Tetrahydrophthalic Anhydride (THPA), in the form of a white crystalline powder, is created from the reaction of butadiene with maleic anhydride. This product can be used in adhesives and as an intermediate for alkyd resins. | |
| Toluene-Diisocyanate (TDI) | Penpet Petrochemical Trading GmbH | Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics i...展开 Toluene-Diisocyanate (TDI) is a clear, colourless to yellowish liquid or solid, depending on the ambient temperature. This product is an aromatic diisocyanate that can be used in varnishes and adhesives. It is an important intermediate in the plastics industry that is normally used in high-end lacquers and coatings. 收起 | |
| Trimethylolpropane (TMP) | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also ...展开 Trimethylolpropane (TMP), in the form of a clear crystalline flake, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Trimethylolpropane (TMP), Liquid | Penpet Petrochemical Trading GmbH | Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also k...展开 Trimethylolpropane (TMP), in the form of a clear colorless liquid, is an alcohol produced by the reaction of formaldehyde with n-butyraldehyde. This product is an intermediate and a triol that can be used in glues and polyurethane coatings. It is also known as hexaglycerol. 收起 | |
| Triphenylphosphite (TPP) | Penpet Petrochemical Trading GmbH | Triphenylphosphite (TPP), in the form of a colourless liquid or solid (depending on ambient temperature) is the ester of phosphorous acid and phenol. This product is normally an antioxidant, but it can be used in lubricant additives and adhesives. |
