| A65 Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construc...展开 A65 Polyethylene Wax is produced by pyrolysis polyethylene and can be used to provide excellent lubrication and good dispersibility. A65 is widely used in the production of plastics，pigments and masterbatches. It is used extensively in the metal, construction, and paper industries, ect. A65 can be used to provide excellent external and internal lubrication in most plastic processes. 收起 | |
| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| Calcium Sulfate Whisker | Shanghai Tengmin Industry Co., Ltd. | Calcium Sulfate Whisker is a calcium sulfate single crystal that is produced with an advanced environmental technology. This product has smooth texture and stability and is primarily used in sealing materials. | |
| Chlorinated PVC-YURON CPVC | Yuron New Material 裕隆新材料 | 水相法低黏度过氯乙烯树脂是使用国际领先的水相悬浮法工艺， 把PVC树脂经氯气深度氯化所制成。在甲苯、二甲苯等多种芳烃、酮类溶剂中有良好的溶解性。这款产品有优异的耐酸，耐碱，耐候，耐水，耐油，耐寒， 阻燃性。可以与醇酸树脂、丙烯酸树脂、氯化橡胶树脂、高氯化聚乙烯树脂等多种树脂相溶。 | |
| Chlorinated Rubber-YURON CR-130 | Yuron New Material 裕隆新材料 | YURON CR-130是以白色粉末形式供货的氯化橡胶。它主要用作橡胶和金属应用的粘合剂原材料。这款产品溶于大多数芳香族溶剂，如甲苯或二甲苯中，还溶于大部分酯。 | |
| Chlorinated Rubber-YURON CR-170 | Yuron New Material 裕隆新材料 | YURON CR-130以白色粉末形式供货的氯化橡胶。它主要用作橡胶和金属应用的粘合剂原材料。这款产品溶于大多数芳香族溶剂，如甲苯或二甲苯中，还溶于大部分酯， | |
| Chlorinated Rubber-YURON CR-22 | Yuron New Material 裕隆新材料 | YURON CR-22是一种氯化橡胶产品，以白色粉末形式供应。它主要添加到溶剂型粘合剂中。它可以溶解于多数芳香族溶剂中，如甲苯或二甲苯，同时可溶于大多数酯中。 | |
| Chlorinated Rubber-YURON CR-40 | Yuron New Material 裕隆新材料 | YURON CR-40是一种以白色粉末形式供货的氯化橡胶，它用作防腐涂料或胶粘剂的树脂，也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。 | |
| Chlorinated Rubber-YURON CR-400 | Yuron New Material 裕隆新材料 | YURON CR-400是一种氯化橡胶产品，以白色粉末形式供应。主要用于在橡胶和金属应用中使用的粘合剂原料中。它可以溶解于多数芳香族溶剂中，如甲苯或二甲苯，同时可溶于大多数酯中。 | |
| Chlorinated Rubber-YURON CR-90 | Yuron New Material 裕隆新材料 | YURON CR-90是一种氯化橡胶，是不溶于水的白色粉末。它用作防腐涂料或胶粘剂的树脂，也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。 | |
| EW-160 Oxidized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | EW-160 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as sign...展开 EW-160 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as significantly improving the lubrication properties of PVC, promote palatalization and improve overall production efficiency and the mechanical strength of the article. 收起 | |
| EW-180 Oxidized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | EW-180 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as sign...展开 EW-180 oxidized polyethylene wax is mainly used as a plastic processing lubricant and can completely replace most imported products. It can be applied to various types of processing PVC, in particular PVC calendering and extrusion process. As well as significantly improving the lubrication properties of PVC, promote palatalization and improve overall production efficiency and the mechanical strength of the article. 收起 | |
| Formaldehyde | Nanjing Shuguang Chemical Group | Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to...展开 Formaldehyde, in the form of a colorless, transparent liquid that could be hazy at room temperature, is mainly used as a disinfectant and antiseptic in medicines. This product is a raw material that can produce coatings and adhesives. It is also used to fabricate formaldehyde-phenolic resins, urea resins, melamine resins, pentaerythritol, and hexamethylenamine. 收起 | |
| Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
| Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...展开 Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. 收起 | |
| Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...展开 Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. 收起 | |
| Hanwha 2-EH (2-Ethyl-1-Hexanol) | Hanwha Chemical Corporation | Hanwha 2-EH is an colorless, transparent liquid made of 2-Ethyl-1-Hexanol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha CP-430 | Hanwha Chemical Corporation | Hanwha CP-430 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-430 is well suited for use in the production of Gravure inks, adhesives and paints. | |
| Hanwha CP-450 | Hanwha Chemical Corporation | Hanwha CP-450 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-450 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha DIDP (Diisodecyl Phthalate) | Hanwha Chemical Corporation | Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...展开 Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. 收起 | |
| Hanwha DINP (Diisononyl Phthalate) | Hanwha Chemical Corporation | Hanwha DINP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...展开 Hanwha DINP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. 收起 | |
| Hanwha DOP (Dioctyl Phthalate) | Hanwha Chemical Corporation | Hanwha DOP is a transparent plasticizer made of Dioctyl Phthalate with excellent viscosity and outstanding compatibility with other resins. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring mat...展开 Hanwha DOP is a transparent plasticizer made of Dioctyl Phthalate with excellent viscosity and outstanding compatibility with other resins. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. 收起 | |
| Hanwha EL-102 | Hanwha Chemical Corporation | Hanwha EL-102 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding foaming and whitening properties. It is well suited for the use in producing eco-friendly wallpapers and foaming products for high speed coatings. | |
| Hanwha EL-103 | Hanwha Chemical Corporation | Hanwha EL-103 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding foaming and whitening properties. It is well suited for the use in producing eco-friendly wallpapers and foaming products for high speed coatings. | |
| Hanwha EM-2070 | Hanwha Chemical Corporation | Hanwha EM-2070 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with a low degree of sedimentation. It is well suited for the use in producing tarpulins, flooring products and for high speed coatings or fillers. | |
| Hanwha EM-3090 | Hanwha Chemical Corporation | Hanwha EM-3090 is a high density PSR resin paste made of a Polyvinyl Chloride emulsion with outstanding thermal and viscosity stability. It is well suited for the use in producing wallpapers, sealants, tarpaulins and eathers. | |
| Hanwha EVA 1519 | Hanwha Chemical Corporation | Hanwha EVA 1519 is an Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its...展开 Hanwha EVA 1519 is an Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1519 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). 收起 | |
| Hanwha EVA 1520 | Hanwha Chemical Corporation | Hanwha EVA 1520 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its ...展开 Hanwha EVA 1520 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1520 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). 收起 | |
| Hanwha EVA 1528 | Hanwha Chemical Corporation | Hanwha EVA 1528 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its ...展开 Hanwha EVA 1528 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1528 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). 收起 | |
| Hanwha EVA 1529 | Hanwha Chemical Corporation | Hanwha EVA 1529 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for...展开 Hanwha EVA 1529 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1529 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). 收起 | |
| Hanwha EVA 1533 | Hanwha Chemical Corporation | Hanwha EVA 1533 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for...展开 Hanwha EVA 1533 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1533 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). 收起 | |
| Hanwha EVA 1540 | Hanwha Chemical Corporation | Hanwha EVA 1540 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for...展开 Hanwha EVA 1540 is a Ethylene Vinylacetate Copolymer that manufactured by a Dow autoclave high pressure process and designed for variety hot melt adhesive application. It is primarily used as an antioxidant and anti-caking agent. It is also well known for its excellent adhesive properties as well as its mixing property with other raw materials. EVA 1540 complies with U.S. FDA regulation 21 CFR 177.1350 (a)(1). 收起 | |
| Hanwha HB-100 | Hanwha Chemical Corporation | Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-f...展开 Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. 收起 | |
| Hanwha HB-65 | Hanwha Chemical Corporation | Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-fi...展开 Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. 收起 | |
| Hanwha I-BuOH (2-Methylpropan-1-Ol) | Hanwha Chemical Corporation | Hanwha I-BuOH is an colorless, transparent liquid made of 2-Methylpropan-1-Ol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents and amino resins as well. | |
| Hanwha KCH-12 | Hanwha Chemical Corporation | Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...展开 Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. 收起 | |
| Hanwha KCH-15 | Hanwha Chemical Corporation | Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other product...展开 Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other products requiring satisfactory adhesion to metal surfaces and corrosion resistance. 收起 | |
| Hanwha KCM-12 | Hanwha Chemical Corporation | Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...展开 Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. 收起 | |
| Hanwha KH-10 | Hanwha Chemical Corporation | Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additi...展开 Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additional transparency and thermal stability. 收起 | |
| Hanwha KH-31G | Hanwha Chemical Corporation | Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperatu...展开 Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperature foaming. 收起 | |
| Hanwha KH-31S | Hanwha Chemical Corporation | Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other pro...展开 Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other products requiring low-temperature foaming products. 收起 | |
| Hanwha KH-60 | Hanwha Chemical Corporation | Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low...展开 Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low-temperature foaming products. 收起 | |
| Hanwha KL-10 | Hanwha Chemical Corporation | Hanwha KL-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a faster gelling speed than other KH products. It has a low density and absorption rate with a smal change when stood up. It is well suited for use in the pro...展开 Hanwha KL-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a faster gelling speed than other KH products. It has a low density and absorption rate with a smal change when stood up. It is well suited for use in the production of sealants, moldings and other products requiring low temperature melting. 收起 | |
| Hanwha KL-31 | Hanwha Chemical Corporation | Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature ...展开 Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature melting foams. 收起 | |
| Hanwha KL-701 | Hanwha Chemical Corporation | Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temper...展开 Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temperature foaming products. 收起 | |
| Hanwha KM-31 | Hanwha Chemical Corporation | Hanwha KM-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and erasers. | |
| Hanwha KM-60 | Hanwha Chemical Corporation | Hanwha KM-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and a small change when stood up. It is well suitable for use in the production of Tarpaulin coatings, transparent labels, erasers and other prod...展开 Hanwha KM-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and a small change when stood up. It is well suitable for use in the production of Tarpaulin coatings, transparent labels, erasers and other products that require good resistance to water and whitening. 收起 | |
| Hanwha MA (High-purity Maleic Anhydride) | Hanwha Chemical Corporation | Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paint...展开 Hanwha MA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of a High-purity Maleic Anhydride, it is primarily used in the production of resins. It can also be used in the production of FRP paints, dyes and pigments. 收起 | |
| Hanwha N-BuOH (N-Butyl Alcohol) | Hanwha Chemical Corporation | Hanwha N-BuOH is an colorless, transparent liquid made of N-Butyl Alcohol. It is primarily used as the main ingredient in the production of certain types of plasticizers. It is well suited for use in making solvents, stabilizers and acrylates as well. | |
| Hanwha PA (High-purity Phthalic Anhydride) | Hanwha Chemical Corporation | Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the product...展开 Hanwha PA is a pure white flaky solid at room temperature that when heated becomes a colorless transparent liquid. Made of High-purity Phthalic Anhydride, it is primarily used in the production of phthalate plasticizers. It can also be used in the production of FRP paints and spandex. 收起 | |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...展开 HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. 收起 | |
| High Chlorinated Polyethylene Adhesive Level - YURON HCPE-H(B) | Yuron New Material 裕隆新材料 | YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, ...展开 YURON HCPE-H(B) is a high clorinated polyethylene. It can bind all kinds of tubes, pipes, and plates which are made by PVC or chlorinated polyethylene and replace CPVC adhesives. It can be used for the bonding of metal material, fiber industry adhesives, and so on. 收起 | |
| High Chlorinated Polyethylene-YURON HCPE-H (A) | Yuron New Material 裕隆新材料 | 胶黏剂级高氯化聚乙烯树脂（HCPE-H）是为胶黏剂市场开发的一款环保高性能树脂。该产品采用水相法氯化工艺， 将PE树脂在水相中深度氯化所制得。HCPE-H的分子量大，黏度高，具有极强的黏结力。它溶解于甲苯、二甲苯、二氯乙烷等各类溶剂中。它可以黏结聚氯乙烯或者氯化聚氯乙烯所制成的各类管材、管件、板材，替代过氯乙烯胶黏剂，黏结金属材料，并在纤维行业用作胶黏剂。 | |
| High Performance High Chlorinated Polyethylene-YURON HPE 2200 | Yuron New Material 裕隆新材料 | YURON HPE 2200 is a high performance high chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to produce high grade adhesives. | |
| Hydrogenated Castor Oil HCO | Changxing Xiehe Polymer Co., Ltd. | Hydrogenated castor oil (HCO) is made from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other...展开 Hydrogenated castor oil (HCO) is made from the hydrogenation process castor oil and can be used as a thickening thixotropic agent in the solvent-based coatings such as inks and adhesives systems. It can also be used in cosmetic, pharmaceutical and other industries. 收起 | |
| KH-540 (SG-Si 1110) | Nanjing Shuguang Chemical Group | KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be us...展开 KH-540 (SG-Si 1110) in the form of a colorless to slightly yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-550 (SG-Si 1100) | Nanjing Shuguang Chemical Group | KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in ...展开 KH-550 (SG-Si 1100), in the form of a colorless to yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion promoter in glass, aluminum, or iron in order to improve pigment dispersions to substrates. It can also be used in polyurethane, epoxy, and acrylic latex paints, and phenol-formaldehyde adhesives and sealants. 收起 | |
| KH-560 (SG-Si 187) | Nanjing Shuguang Chemical Group | KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It ...展开 KH-560 (SG-Si 187), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used in the adhesive industry to enhance the adhesions of adhesives, particularly epoxy, polyurethane, and phenol-formaldehyde. It can also improve the cohesive force of acrylic latex, sealants, polyurethanes, and epoxy resins for glass sealants. 收起 | |
| KH-570 (SG-Si 174) | Nanjing Shuguang Chemical Group | KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under ...展开 KH-570 (SG-Si 174), in the form of a colorless to pale yellow clear liquid, is an ethoxylated silane. This product can be used as an adhesion improver in adhesives and coatings. It can also improve the strength of unsaturated polyester composites under dry or hygrometric conditions. 收起 | |
| MAW-6600 Micronized Polyamine Wax Powder | Changxing Xiehe Polymer Co., Ltd. | MAW-6600 micronized polyamine wax powder is used in solvent-base coating, ink and adhesive. It could improve the scratch resistance of paints and used as coatings’ matting agent, sanding aid, additive for powder coatings, anti-blocking agent for printing ...展开 MAW-6600 micronized polyamine wax powder is used in solvent-base coating, ink and adhesive. It could improve the scratch resistance of paints and used as coatings’ matting agent, sanding aid, additive for powder coatings, anti-blocking agent for printing inks. 收起 | |
| MEW-3618 Micronized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | MEW-3618 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properti...展开 MEW-3618 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properties matting agent for paints & coatings. As well as a lubricant for plastics especially for high demanding pigment concentrates based on PE and PP (dispersing aid). 收起 | |
| MEW-3628 Micronized Polyethylene Wax | Changxing Xiehe Polymer Co., Ltd. | MEW-3628 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface propert...展开 MEW-3628 Micronized Polyethylene Wax is a new kind of amide rheological additive that is used in non-aqueous system to prevent precipitation and flow. Primarily used as a rub resistance additive for printing inks. It can be used to modify surface properties matting agent for paints & coatings. As well as a lubricant for plastics especially for high demanding pigment concentrates based on PE and PP (dispersing aid). 收起 | |
| Modified Hydrogenated Castor Oil Rheological Additive RC-HMT | Changxing Xiehe Polymer Co., Ltd. | RC-HMT is a 100% active rheological additive and is generally used for solvent based paints and coatings, adhesives, sealants and lubricant oils. It can provide excellent thickening, thixotropic and sag resistance. It is primarily used in the production o...展开 RC-HMT is a 100% active rheological additive and is generally used for solvent based paints and coatings, adhesives, sealants and lubricant oils. It can provide excellent thickening, thixotropic and sag resistance. It is primarily used in the production of industrial coatings, traffic paints, inks, powder paints, adhesive & sealants and lubricating oils. 收起 | |
| Modified Hydrogenated Castor Oil Rheological Additive RC-HST | Changxing Xiehe Polymer Co., Ltd. | RC-HST is a 100% active organic rheological additive and is made by a special process modification of solvent-based coatings. It is primarily used in the production of inks and adhesives and can effectively provide thixotropy and sag as well as resistance...展开 RC-HST is a 100% active organic rheological additive and is made by a special process modification of solvent-based coatings. It is primarily used in the production of inks and adhesives and can effectively provide thixotropy and sag as well as resistance and prevention of sedimentation. 收起 | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...展开 Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...展开 Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. 收起 |
