| AC-21 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epo...展开 AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epoxy, silicone, acrylic and polyurethane. 收起 | |
| AC-62 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used...展开 AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-626 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62...展开 AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-626 can also be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-63 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, cla...展开 AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, clay and silicas. 收起 | |
| AC-65 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for ...展开 AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for adhesive and sealant production. 收起 | |
| AC-66 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer ...展开 AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer to glass and metallic substrates. 收起 | |
| AC-661 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor i...展开 AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor in polymer to glass as well as in metallic substrates. 收起 | |
| AC-662 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion...展开 AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder to glass and metal substrates. 收起 | |
| AC-66(E) | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion pro...展开 AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder to glass and metal substrates. 收起 | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...展开 AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. 收起 | |
| AC-68 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic e...展开 AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic emulsion in adhesives as well as a filler in glass fiber surface treatments. 收起 | |
| AC-70 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-70 is a Vinyltri tert-butyl peroxide silane with the chemical formula of C14H30O6Si and comes as a yellowish liquid. Primarily used as an adhesive and sealant, it is used extensively in the rubber industry. AC-70 can bond to other rubber, silicon, and ...展开 AC-70 is a Vinyltri tert-butyl peroxide silane with the chemical formula of C14H30O6Si and comes as a yellowish liquid. Primarily used as an adhesive and sealant, it is used extensively in the rubber industry. AC-70 can bond to other rubber, silicon, and metal substrates. 收起 | |
| AC-703 Anionic Fluorocarbon Surfactant | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in s...展开 AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in strong base or strong oxidant media. It is a brownish, clear liquid in appearance. 收起 | |
| AC-75 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass ...展开 AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass / metallic substrates. 收起 | |
| AC-76 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-76 is a Vinyltriisopropoxysilane with the chemical formula C11H24O3Si and comes as a clear and colorless liquid. It is primarily used as a monomer in acrylic emulsions in the production of paints and coatings. | |
| AC-77 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and oth...展开 AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and other rubber chemicals as an adhesion promoter for paints and coatings. 收起 | |
| APMS Fluid A 1000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 10000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mo...展开 APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 2000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 5000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| Fluororesin | Ark (Fogang) Chemicals Industry Co., Ltd. | Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints ...展开 Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints which are weather durable, antifouling or salt fog resistant. 收起 | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起 | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| Speedblock 326 | Lambson Group Ltd. | Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...展开 Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm 收起 | |
| Speedblock 327 | Lambson Group Ltd. | Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers. | |
| Speedblock 328 | Lambson Group Ltd. | Speedblock 328 is a UV absorber of the hydroxyl phenyl benzotriazole class that can be used in adhesives and polymers. This pale yellow powder can be used alone or with additional additional additives including hindered light stabilisers antioxidants. | |
| Speedblock AO2 | Lambson Group Ltd. | Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water res...展开 Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water resisting performance while being able to combine with other stabilisers. 收起 | |
| Speedblock UV-0 | Lambson Group Ltd. | SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. | |
| Speedblock UV-6 | Lambson Group Ltd. | SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% de...展开 SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. 收起 | |
| Speedcure 7005 | Lambson Group Ltd. | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with ...展开 SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure 7040 | Lambson Group Ltd. | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...展开 SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. 收起 | |
| Speedcure 73 | Lambson Group Ltd. | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| Speedcure 84 | Lambson Group Ltd. | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 97 | Lambson Group Ltd. | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BDMB | Lambson Group Ltd. | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BEDB | Lambson Group Ltd. | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BEM | Lambson Group Ltd. | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulati...展开 SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure BKL | Lambson Group Ltd. | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| Speedcure BMS | Lambson Group Ltd. | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV a...展开 SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure BP | Lambson Group Ltd. | SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulati...展开 SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. 收起 | |
| Speedcure CPTX | Lambson Group Ltd. | SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DETX | Lambson Group Ltd. | SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DMB | Lambson Group Ltd. | SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EDB | Lambson Group Ltd. | SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EHA | Lambson Group Ltd. | SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EPD | Lambson Group Ltd. | Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起 | |
| Speedcure MBF | Lambson Group Ltd. | SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244_nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure MBP | Lambson Group Ltd. | SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulatio...展开 SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure PBZ | Lambson Group Ltd. | SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and L...展开 SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure PDO | Lambson Group Ltd. | SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications...展开 SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications. 收起 | |
| Speedcure XFs | Lambson Group Ltd. | SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at ...展开 SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations. 收起 | |
| Tetramethyldisiloxane | Ark (Fogang) Chemicals Industry Co., Ltd. | Tetramethyldisiloxane is a clear and colorless liquid with the chemical structure C4H14OSi2. It is widely used as a silicone intermediate in the production of high performance silicone surfactants, liquid silicone rubber, modified silicone oils, plastics ...展开 Tetramethyldisiloxane is a clear and colorless liquid with the chemical structure C4H14OSi2. It is widely used as a silicone intermediate in the production of high performance silicone surfactants, liquid silicone rubber, modified silicone oils, plastics and other resins. 收起 | |
| Uvi-Cure S105E | Lambson Group Ltd. | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S110-LV | Lambson Group Ltd. | Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起 | |
| Uvi-Cure S128 | Lambson Group Ltd. | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S130 | Lambson Group Ltd. | UviCure S130 is an alcohol functional mono oxetane. It is used as a reactive diluent in cationic formulations and will increase curing speed and adhesion when polymerised with onium salt photoinitiators. | |
| UviCure S105 | Lambson Group Ltd. | UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. |
