| BLUESIL PRIM 10073 | Elkem Silicones | BLUESIL PRIM 10073 is a product intended to improve the adhesion of BLUESIL one-component and two-component elastomers to metals and certain painted surfaces. The product is available as a ready-to-use solution of reactants diluted in a solvent. | |
| BLUESIL PRIM 12076 | Elkem Silicones | BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactan...展开 BLUESIL PRIM 12076 is a compound intended to improve the adhesion of one- or two-component room temperature vulcanising silicone elastomers. BLUESIL PRIM 12076 can be used on most porous surfaces. It comes as a colourless, ready to use solution of reactants diluted in a solvent. 收起 | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 8170P | Elkem Silicones | BLUESIL RES 8170P is used to manufacture rigid insulators in the high pressure process: laminates based on glass fabric, mica (mica paper), mica/glass composite fabric and asbestos. It offers outstanding mechanical properties. | |
| BLUESIL RES 8360M | Elkem Silicones | BLUESIL RES 8360M is a methyl silicone resin supplied as a solution in toluene and intended for the manufacture of flexible insulants. | |
| BLUESIL SLT 10B OFF WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10B PVC WHITE | Elkem Silicones | BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low ...展开 BLUESIL SLT 10B is a one component, odourless, ready-to-use, neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. 收起 | |
| BLUESIL SLT 10T OFF WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 10T PVC WHITE | Elkem Silicones | BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low m...展开 BLUESIL SLT 10T is a one-component, odourless, ready-to-use neutral silicone elastomer (alcoxy type) intended to produce sealing and bonding joints. It cures at room temperature in the presence of air moisture to give a flexible and strong seal with low modulus of elasticity. BLUESIL SLT 10T adheres without a primer on virtually all surfaces found in building construction and accepts movements of 25% in continuous service within a wide range of temperatures. 收起 | |
| BLUESIL SLT 3B BLACK | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3B WHITE | Elkem Silicones | BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of...展开 BLUESIL SLT 3B is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 25 % throughout a wide temperature range resistance to severe weathering is excellent. 收起 | |
| BLUESIL SLT 3E BLACK | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3E WHITE | Elkem Silicones | BLUESIL SLT 3E is a one-component silicone sealant which, when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses excellent resistance to severe weathering conditions. | |
| BLUESIL SLT 3S TRANSLUCENT | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 3S WHITE | Elkem Silicones | BLUESIL SLT 3S is a one-component, moisture-cured silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT 4S TRANSCLUCENT | Elkem Silicones | BLUESIL SLT 4S is a one-component, moisture-cure silicone sealant which contains a fungicide. It cures at room temperature to form a flexible, low modulus watertight joint for general sanitary sealing. | |
| BLUESIL SLT AQUARIUM BLACK | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT AQUARIUM TRANSLUCENT | Elkem Silicones | BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modu...展开 BLUESIL SLT AQUARIUM is a one-component, ready-to-use silicone elastomer intended for sealing and bonding applications. This sealant cures quickly at room temperature and in the presence of air moisture to give a flexible and strong joint with a high modulus of elasticity. BLUESIL SLT AQUARIUM offers excellent resistance to climatic ageing. 收起 | |
| BLUESIL SLT NOVART S TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to...展开 BLUESIL SLT NOVART S is a one component, neutral (alcoxy) and fast curing, ready-to-use silicone elastomer suitable for weather sealing and bonding seals in construction applications, which is protected by a fungicide. It crosslinks at room temperature to give a flexible seal of low modulus. 收起 | |
| BLUESIL SLT NOVART TRANSLUCENT | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT NOVART WHITE | Elkem Silicones | BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL ...展开 BLUESIL SLT NOVART is a one component, neutral and fast curing, ready-to-use silicone elastomer suitable for weather-sealing and bonding seals in construction applications. It crosslinks at room temperature to give a flexible seal of low modulus. BLUESIL SLT NOVART can withstand movement of 25 % in constant service throughout a wide temperature range. 收起 | |
| BLUESIL SLT VEC 90 BLACK | Elkem Silicones | BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, fle...展开 BLUESIL SLT VEC 90 is a one-component silicone elastomer with high mechanical properties mainly intended for applications using so called Structural Glazing technique. It cures at room temperature and in the presence of air humidity to form a strong, flexible seal. 收起 | |
| BLUESIL SLT VEC 99A BLACK | Elkem Silicones | BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and ...展开 BLUESIL SLT VEC 99 is a two-component silicone elastomer with a high modulus of elasticity. After homogeneous mixing of parts A and B, the paste-like product transforms quickly at room temperature into an elastic material with outstanding mechanical and adhesion properties. Its advantage, relative to conventional two-component elastomers lies in the large tolerance relative to the accuracy of the ratio A/B. BLUESIL SLT VEC 99 has been specially designed to meet requirements in Structural Glazing applications. 收起 | |
| BLUESIL SLT VI 10 BLACK | Elkem Silicones | BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with h...展开 BLUESIL SLT VI 10 is a one component, odourless, ready to use neutral silicone elastomer mainly used as second barrier seal in the Double Glazing market. It cures at room temperature, under the effect of natural air humidity to give a flexible seal with high mechanical performance levels. 收起 | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...展开 D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...展开 D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...展开 D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. 收起 | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...展开 D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...展开 D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...展开 D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. 收起 | |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...展开 FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. 收起 | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...展开 FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. 收起 | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...展开 FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. 收起 | |
| HP series™ HM080 | Polygroup Inc. | HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...展开 HP series™ HM080 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. 收起 | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...展开 HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. 收起 | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. | |
| LT-530 | BlueSky Chemical Co., Ltd. | LT-530 is a 2-(3,4-epoxycyclohexyl) ethyl trimethoxysilane. This product can be used as a water-based polyurethane dispersion in adhesives and as an adhesion promoter for organic/inorganic interfaces. Its density at 25 degrees Celsius is 1.07 g/ml. | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...展开 LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. 收起 | |
| LT-550 | BlueSky Chemical Co., Ltd. | LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25...展开 LT-550 is a γ-aminopropyltriethoxysilane, a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. This product can be used as an adhesion promoter in acrylic coatings, adhesives, and sealants. Its density at 25 degrees Celsius is 0.94 g/ml. 收起 | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...展开 LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. 收起 | |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...展开 LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. 收起 | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...展开 LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. 收起 | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| NOVACOM-P™ HFS2100P | Polygroup Inc. | NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EV...展开 NOVACOM-P™ HFS2100P is a maleic anhydride (MAH) grafted high density polyethylene (HPDE) polymer in a powder form. These polar materials have been specifically designed to provide adhesion to inorganic fillers or additives, wood and paper fiber, glass, EVOH, Nylon and other materials. Primarily markets for these materials are plastics compounding and mixed plastic recycle industries as compatibilizer. 收起 | |
| PROPOLDER™ MPP2010 | Polygroup Inc. | PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...展开 PROPOLDER™ MPP2010 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. 收起 | |
| PROPOLDER™ MPP2020 | Polygroup Inc. | PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...展开 PROPOLDER™ MPP2020 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. 收起 | |
| PROPOLDER™ MPP2040 | Polygroup Inc. | PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...展开 PROPOLDER™ MPP2040 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. 收起 | |
| PROPOLDER™ MPP2060 | Polygroup Inc. | PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...展开 PROPOLDER™ MPP2060 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. 收起 | |
| PROPOLDER™ MPP2080 | Polygroup Inc. | PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...展开 PROPOLDER™ MPP2080 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. 收起 | |
| PROPOLDER™ MPP2100 | Polygroup Inc. | PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with graft...展开 PROPOLDER™ MPP2100 is a maleic anhydride modified polypropylene (PP) polymer in a fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ MPP series materials are polypropylene powders with grafted polar groups for enhanced performance in specialty applications such as paints and coatings, cosmetics, personal care and textiles. 收起 | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...展开 SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 收起 | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...展开 SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 收起 | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...展开 SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. 收起 | |
| Speedblock 326 | Lambson Group Ltd. | Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220...展开 Speedblock 326 is a UV absorber of the hydroxyl phenyl benzotriazole class and can be used to impart light stability in organic materials and as an adhesive. A pale yellow powder, it contains a range of UV protection with an absorption band width from 220nm to 400nm 收起 | |
| Speedblock 327 | Lambson Group Ltd. | Speedblock 327 is a UV absorber of the hydroxyl phenyl benzotriazole class that has absorption bands in the 200-230nm & 300-360nm ranges. A pale yellow powder, this product can be used in adhesives and polymers. | |
| Speedblock 328 | Lambson Group Ltd. | Speedblock 328 is a UV absorber of the hydroxyl phenyl benzotriazole class that can be used in adhesives and polymers. This pale yellow powder can be used alone or with additional additional additives including hindered light stabilisers antioxidants. | |
| Speedblock AO2 | Lambson Group Ltd. | Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water res...展开 Speedblock AO2 is a sterically hindered phenolic anti-oxidant. It is an efficient and non-discolouring stabiliser for organic substrates including elastomers and adhesives. A white crystalline powder, it is non-polluting, non-toxic with head and water resisting performance while being able to combine with other stabilisers. 收起 | |
| Speedblock UV-0 | Lambson Group Ltd. | SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. | |
| Speedblock UV-6 | Lambson Group Ltd. | SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% de...展开 SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. 收起 | |
| Speedcure 7005 | Lambson Group Ltd. | SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with ...展开 SpeedCure 7005 is a liquid polymeric Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 245 and 309 nm. SpeedCure 7005 provides surface cure, low odour and low migration potential when used at 0.5-8 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure 7040 | Lambson Group Ltd. | SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable f...展开 SpeedCure 7040 is a liquid polymeric amine synergist of the aminobenzoate family. SpeedCure 7040 provides low odour, low migration and generates active species when used at 2-10 wt% and combined with Norrish Type II photoinitiators in UV and LED curable formulations. 收起 | |
| Speedcure 73 | Lambson Group Ltd. | SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV-curable formulations. | |
| Speedcure 84 | Lambson Group Ltd. | SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure 97 | Lambson Group Ltd. | SpeedCure 97 is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximum at 306 nm. SpeedCure 97 provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BDMB | Lambson Group Ltd. | SpeedCure BDMB is a Norrish Type I photoinitiator from the aminoacetophenone family, with an absorption maximumat 321 nm. SpeedCure BDMB provides high reactivity, surface and depth cure when used at 0.5-5 wt% in UV and LED curable formulations. | |
| Speedcure BEDB | Lambson Group Ltd. | SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure BEM | Lambson Group Ltd. | SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulati...展开 SpeedCure BEM is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 254.nm. SpeedCure BEM provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure BKL | Lambson Group Ltd. | SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253.nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations. | |
| Speedcure BMS | Lambson Group Ltd. | SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV a...展开 SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315.nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure BP | Lambson Group Ltd. | SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulati...展开 SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with an absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV-curable formulations. 收起 | |
| Speedcure CPTX | Lambson Group Ltd. | SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DETX | Lambson Group Ltd. | SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and co...展开 SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure DMB | Lambson Group Ltd. | SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EDB | Lambson Group Ltd. | SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EHA | Lambson Group Ltd. | SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations. | |
| Speedcure EPD | Lambson Group Ltd. | Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addi...展开 Speedcure EPD is a highly efficient amine synergist which, when used with Type II photoinitiators, generates free radicals that initiate photo-polymerisation of suitable resin formulations. This white to off white powder has low toxicity and odour in addition to solubility in most common organic solvents and UV curable monomers. It is applied to wood varnishes, printing inks, decorative coatings for metal cans and food cartons, adhesives, sealants and metal primers. 收起 | |
| Speedcure MBF | Lambson Group Ltd. | SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244_nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations. | |
| Speedcure MBP | Lambson Group Ltd. | SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulatio...展开 SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259.nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations. 收起 | |
| Speedcure PBZ | Lambson Group Ltd. | SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and L...展开 SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations. 收起 | |
| Speedcure PDO | Lambson Group Ltd. | SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications...展开 SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications. 收起 | |
| Speedcure XFs | Lambson Group Ltd. | SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at ...展开 SpeedCure XFs is a blend of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations. 收起 | |
| Uvi-Cure S105E | Lambson Group Ltd. | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S110-LV | Lambson Group Ltd. | Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains l...展开 Uvi-Cure S110-LV is a standard cycloaliphatic epoxy base resin used in metal decoration coatings, overprint varnishes, white base coats, DVD adhesives, electrical coatings and sealants in addition to flexo, screen and ink jet inks. This product contains low viscosity enabling a greater scope for meeting end-use processing needs. When this pale yellow to colourless transparent liquid is combined with photoinitiators it produces a clear, hard, glossy coatings. 收起 | |
| Uvi-Cure S128 | Lambson Group Ltd. | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S130 | Lambson Group Ltd. | UviCure S130 is an alcohol functional mono oxetane. It is used as a reactive diluent in cationic formulations and will increase curing speed and adhesion when polymerised with onium salt photoinitiators. | |
| UviCure S105 | Lambson Group Ltd. | UviCure S105 is a low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. |
