| ALKOMOL® IT 406 | Indorama Ventures | ALKOMOL® IT 406 is a nonionic compound resulting from the reaction of isotridecyl alcohol with 4 moles of ethylene oxide and 6 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophil...展开 ALKOMOL® IT 406 is a nonionic compound resulting from the reaction of isotridecyl alcohol with 4 moles of ethylene oxide and 6 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic part from the addtion of ethylene oxide. This structure allows for low foaming power, excellent wetting properties and good detergency. This product can be used in both Paints and Coatings and the Industrial and Institutional Industry. In the I&I it has the lowest foaming capacity in the Alokmol® line and thus functions as an anti-foaming agent in the presense of other surfactants. It is recommended for wetting and detergency in bottle washing and dairy & brewery tank cleaners. In P&C it shows significant surface tension reduction power and has good wetting and dispersion properties. This enables it to be used in pigmented pastes, acrylic paint and vinyl latex paint. 收起 | |
| ALKOMOL® L 306 | Indorama Ventures | ALKOMOL® L 306 is a nonionic compound resulting from the reaction of lauryl alcohol with 3 moles of ethylene oxide and 6 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic par...展开 ALKOMOL® L 306 is a nonionic compound resulting from the reaction of lauryl alcohol with 3 moles of ethylene oxide and 6 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic part from the addtion of ethylene oxide. This structure allows for low foaming power, excellent wetting properties and good detergency. This product can be used in both Paints and Coatings and the Industrial and Institutional Industry. In the I&I it is recommended as a wetting agent in rinse-aids, automatic dishwashing detergents and low foam I&I degreasers. In P&C it shows significant surface tension reduction power and has good wetting and dispersion properties. This enables it to be used in pigmented pastes, acrylic paint and vinyl latex paint. 收起 | |
| ALKOMOL® L 405 | Indorama Ventures | ALKOMOL® L 405 is a nonionic compound resulting from the reaction of lauryl alcohol with 4 moles of ethylene oxide and 5 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic par...展开 ALKOMOL® L 405 is a nonionic compound resulting from the reaction of lauryl alcohol with 4 moles of ethylene oxide and 5 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic part from the addtion of ethylene oxide. This structure allows for low foaming power, excellent wetting properties and good detergency. This product can be used in both Paints and Coatings and the Industrial and Institutional Industry. In the I&I it is recommended as a wetting agent in rinse-aids, automatic dishwashing detergents and low foam I&I degreasers. In P&C it shows significant surface tension reduction power and has good wetting and dispersion properties. This enables it to be used in pigmented pastes, acrylic paint and vinyl latex paint. 收起 | |
| ALKOMOL® L 408 | Indorama Ventures | ALKOMOL® L 408 is a nonionic compound resulting from the reaction of lauryl alcohol with 4 moles of ethylene oxide and 8 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic par...展开 ALKOMOL® L 408 is a nonionic compound resulting from the reaction of lauryl alcohol with 4 moles of ethylene oxide and 8 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic part from the addtion of ethylene oxide. This structure allows for low foaming power, excellent wetting properties and good detergency. This product can be used in both Paints and Coatings and the Industrial and Institutional Industry. In the I&I it is recommended as a wetting agent in rinse-aids, automatic dishwashing detergents and low foam I&I degreasers. In P&C it shows significant surface tension reduction power and has good wetting and dispersion properties. This enables it to be used in pigmented pastes, acrylic paint and vinyl latex paint. 收起 | |
| ALKOMOL® L 504 | Indorama Ventures | ALKOMOL® L 504 is a nonionic compound resulting from the reaction of lauryl alcohol with 5 moles of ethylene oxide and 4 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic par...展开 ALKOMOL® L 504 is a nonionic compound resulting from the reaction of lauryl alcohol with 5 moles of ethylene oxide and 4 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic part from the addtion of ethylene oxide. This structure allows for low foaming power, excellent wetting properties and good detergency. This product can be used in both Paints and Coatings and the Industrial and Institutional Industry. In the I&I it is recommended as a wetting agent in rinse-aids, automatic dishwashing detergents and low foam I&I degreasers. In P&C it shows significant surface tension reduction power and has good wetting and dispersion properties. This enables it to be used in pigmented pastes, acrylic paint and vinyl latex paint. 收起 | |
| ALKOMOL® L 603 | Indorama Ventures | ALKOMOL® L 603 is a nonionic compound resulting from the reaction of lauryl alcohol with 6 moles of ethylene oxide and 3 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic par...展开 ALKOMOL® L 603 is a nonionic compound resulting from the reaction of lauryl alcohol with 6 moles of ethylene oxide and 3 moles propylene oxide. The lipophilic portion of the molecule comes from the fatty alcohol and propylene oxide and the hydrophilic part from the addtion of ethylene oxide. This structure allows for low foaming power, excellent wetting properties and good detergency. This product can be used in both Paints and Coatings and the Industrial and Institutional Industry. In I&I it is recommended as a wetting agent in rinse-aids, automatic dishwashing detergents and low foam I&I degreasers. In P&C it shows significant surface tension reduction power and has good wetting and dispersion properties. This enables it to be used in pigmented pastes, acrylic paint and vinyl latex paint. 收起 | |
| ALKONAT® C200 | Indorama Ventures | ALKONAT® C200 is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. This product is a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency ...展开 ALKONAT® C200 is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. This product is a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency agent and co-emulsifiers, along with its high melting point, aids in the stability and rheology desired for oil-in-water emulsions. It is 29% renewable carbon and has about 15.7 HLB. The ALKONAT® alcohol ethoxylates are also recommended in hair conditioners and crème rinses as thickeners and emulsifiers/dispersing agents. 收起 | |
| ALKONAT® CE 200 F | Indorama Ventures | ALKONAT® CE 200 F is the reaction product of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. This product is a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consisten...展开 ALKONAT® CE 200 F is the reaction product of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. This product is a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency agent and co-emulsifiers, along with its high melting point, aids in the stability and rheology desired for oil-in-water emulsions. It is also recommended for liquid wax formulas for floors, carnauba-based leather polishes, and car care products based on beeswax and paraffin. This product is 31% renewable carbon and has about 15.4 HLB. The combination of ALKONAT® CE 50 and ALKONAT® CE 200 F with ALKOMOL® E (Propoxylated Stearyl Alcohol) is specifically recommended in hair conditioners for daily use, providing such benefits as: increased viscosity, stability of the emulsion and suitable lubrication, that facilitates hair combing, both wet and dry. 收起 | |
| ALKONAT® CE 250 F | Indorama Ventures | ALKONAT® CE 250 F is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. It is a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency agent ...展开 ALKONAT® CE 250 F is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. It is a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency agent and co-emulsifiers, along with its high melting point, aids in the stability and rheology desired for oil-in-water emulsions. This product is 26% renewable carbon and has about 16.1 HLB. The ALKONAT® alcohol ethoxylates are also recommended in hair conditioners and crème rinses as thickeners and emulsifiers/dispersing agents. 收起 | |
| ALKONAT® CE50 | Indorama Ventures | ALKONAT® CE50 is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. ALKONAT® CE is indicated as O/W emulsifier of synthetic waxes and stabilizer of emulsions for mixtures of natural and synthet...展开 ALKONAT® CE50 is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. ALKONAT® CE is indicated as O/W emulsifier of synthetic waxes and stabilizer of emulsions for mixtures of natural and synthetic waxes.This product is a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency agent and co-emulsifiers, along with its high melting point, aids in the stability and rheology desired for oil-in-water emulsions. This product is 64% renewable carbon and has about 10.0 HLB. The combination of ALKONAT® CE 50 and ALKONAT® CE 200 F with ALKOMOL® E (Propoxylated Stearyl Alcohol) is specifically recommended in hair conditioners for daily use, providing such benefits as: increased viscosity, stability of the emulsion and suitable lubrication, that facilitates hair combing, both wet and dry. 收起 | |
| ALKONAT® E 20 F | Indorama Ventures | ALKONAT® E 20 F is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. It is considered a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consisten...展开 ALKONAT® E 20 F is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. It is considered a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency agent and co-emulsifiers, along with its high melting point, aids in the stability and rheology desired for oil-in-water emulsions. This product is 82% renewable carbon and has about 4.9 HLB. The ALKONAT® alcohol ethoxylates are also recommended in hair conditioners and crème rinses as thickeners and emulsifiers/dispersing agents. ALKONAT® E 20 F is used in antiperspirants and deodorants. 收起 | |
| ALKONAT® E 200 F | Indorama Ventures | ALKONAT® E 200 F is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. This product is considered a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as...展开 ALKONAT® E 200 F is the reaction products of cetyl, cetearyl and stearyl alcohols of natural, vegetable origin with ethylene oxide. This product is considered a classical emulsifier for creams and lotions. Its compatibility with the fatty alcohols used as consistency agent and co-emulsifiers, along with its high melting point, aids in the stability and rheology desired for oil-in-water emulsions. This product is 31% renewable carbon and has about 15.3 HLB. The ALKONAT® alcohol ethoxylates are also recommended in hair conditioners and crème rinses as thickeners and emulsifiers/dispersing agents. ALKONAT® E 200 F is used in antiperspirants and deodorants. 收起 | |
| ALKONAT® L 10 | Indorama Ventures | ALKONAT® L 10 is a grade of ethoxylated alcohol obtained by the reaction of naturally derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer and also provides high detergency and wettability. This product has 86% carbo...展开 ALKONAT® L 10 is a grade of ethoxylated alcohol obtained by the reaction of naturally derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer and also provides high detergency and wettability. This product has 86% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants, and humectants. They can be used in cream cleansers, essence fixers, dyes, perms, and bleaches for hair, lotions, and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifiers for medicinal shampoos. 收起 | |
| ALKONAT® L 100 | Indorama Ventures | ALKONAT® L 100 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 38% car...展开 ALKONAT® L 100 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 38% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 20 | Indorama Ventures | ALKONAT® L 20 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 76% carb...展开 ALKONAT® L 20 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 76% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 230 | Indorama Ventures | ALKONAT® L 230 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 22% car...展开 ALKONAT® L 230 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 22% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 30 | Indorama Ventures | ALKONAT® L 30 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 68% carb...展开 ALKONAT® L 30 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 68% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 40 | Indorama Ventures | ALKONAT® L 40 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 61% carb...展开 ALKONAT® L 40 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 61% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 50 | Indorama Ventures | ALKONAT® L 50 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 56% carb...展开 ALKONAT® L 50 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 56% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 60 | Indorama Ventures | ALKONAT® L 60 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 51% carb...展开 ALKONAT® L 60 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 51% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 70 | Indorama Ventures | ALKONAT® L 70 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 47% carb...展开 ALKONAT® L 70 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 47% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 70 WA | Indorama Ventures | ALKONAT® L 70 WA is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO) in an aqueous solution. It is an excellent surface tension reducer, and also provides high detergency and wettability....展开 ALKONAT® L 70 WA is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO) in an aqueous solution. It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 47% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 80 | Indorama Ventures | ALKONAT® L 80 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 41% carb...展开 ALKONAT® L 80 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 41% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONAT® L 90 | Indorama Ventures | ALKONAT® L 90 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 38% carb...展开 ALKONAT® L 90 is a grade of ethoxylated alcohol obtained by the reaction of naturally-derived lauryl alcohol with ethylene oxide (EO). It is an excellent surface tension reducer, and also provides high detergency and wettability. This product has 38% carbons derived from natural sources. It can be used both in household and personal care products. ALKONAT® L products act as emulsifiers, solubilizers, thickeners, foaming agents, detergents, dispersants and humectants. They can be used in cream cleansers, essence fixers, dyes, perms and bleaches for hair, lotions and deodorants and also as viscosity agents and co-surfactants in shampoos and bathing gels. ALKONAT® L products are excellent emulsifier for medicinal shampoos. 收起 | |
| ALKONT® IT 100 | Indorama Ventures | ALKONT® IT 100 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is soluble in ...展开 ALKONT® IT 100 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is soluble in water and offers excellent capability to wet textiles. ALKONT® IT 100 has an HLB value of 13.8. 收起 | |
| ALKONT® IT 120 | Indorama Ventures | ALKONT® IT 120 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is suitable fo...展开 ALKONT® IT 120 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is suitable for use in high alkaline, hot-wash detergents, multiuse and ammonia-based detergents, laundry detergents, metal pretreatment degreasers and disinfecting detergents. Its water solubility characteristic and high cloud point ensure stable formulations at high temperatures. ALKONT® IT 120 has an HLB value of 14.5. 收起 | |
| ALKONT® IT 30 | Indorama Ventures | ALKONT® IT 30 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It can be used as a water-in-oil emulsifier in detergents and degreasing agents. This product functions as a humectant, sol...展开 ALKONT® IT 30 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It can be used as a water-in-oil emulsifier in detergents and degreasing agents. This product functions as a humectant, solubilizer, dispersing agent and emulsifier in agrochemical formulations. It can be used as intermediates in the production of moderate foaming anionic surfactants. ALKONT® IT 30 has an HLB value of 8.0. 收起 | |
| ALKONT® IT 50 | Indorama Ventures | ALKONT® IT 50 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It can be used as a water-in-oil emulsifier in detergents and degreasing agents. This product functions as a humectant, sol...展开 ALKONT® IT 50 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It can be used as a water-in-oil emulsifier in detergents and degreasing agents. This product functions as a humectant, solubilizer, dispersing agent and emulsifier in agrochemical formulations. It can be used as intermediates in the production of moderate foaming anionic surfactants. ALKONT® IT 50 has an HLB value of 10.5. 收起 | |
| ALKONT® IT 60 | Indorama Ventures | ALKONT® IT 60 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is also useful ...展开 ALKONT® IT 60 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is also useful in degreasing formulations for the pretreatment of metal and car parts, car shampoos, laundry detergents and abrasive cleaning agents for silver. It is also widely used in the textile sector as a silicon oil emulsifier and re-humectant. ALKONT® IT 60 has an HLB value of 11.4. 收起 | |
| ALKONT® IT 80 | Indorama Ventures | ALKONT® IT 80 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is soluble in w...展开 ALKONT® IT 80 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is soluble in water and offers excellent capability to wet textiles. ALKONT® IT 80 has an HLB value of 12.8. 收起 | |
| ALKONT® IT 90 | Indorama Ventures | ALKONT® IT 90 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is soluble in w...展开 ALKONT® IT 90 is a biodegradable non-ionic surfactant, resulting from the reaction of isotridecyl alcohol with ethylene oxide (EO). It is recommended in construction paint, pigment dispersion and in polymerization in emulsion. This product is soluble in water and offers excellent capability to wet textiles. ALKONT® IT 90 has an HLB value of 13.3. 收起 | |
| ALKOPON® CN | Indorama Ventures | ALKOPON® CN is based on naturally-derived lauryl alcohol. The average number of moles of ethylene oxide equals 2. It is derived from palm kernel oil certified by RSPO (Roundtable on Sustainable Palm Oil), an organization of which OXITENO is an associate, ...展开 ALKOPON® CN is based on naturally-derived lauryl alcohol. The average number of moles of ethylene oxide equals 2. It is derived from palm kernel oil certified by RSPO (Roundtable on Sustainable Palm Oil), an organization of which OXITENO is an associate, whose aim is to promote sustainable growth of palm oil and palm kernel production. This product can be used in shampoos, liquid soaps, bubble baths, toothpastes, hand and dish washing detergents, fine fabric wash, liquid laundry detergents and household hard surface cleaners such as glass cleaners and bathroom cleaners. It's used as primary surfactants in shampoo, liquid soap, and bubble bath formulations. 收起 | |
| ALKOPON® N | Indorama Ventures | ALKOPON® N consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. The naturally-derived lauryl alcohol used to produce it is derived from palm kernel oil....展开 ALKOPON® N consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. The naturally-derived lauryl alcohol used to produce it is derived from palm kernel oil. It is a completely biodegradable sodium lauryl ether sulfate (27%). This product can be used in shampoos, liquid soaps, bubble baths, toothpastes, hand and dish washing detergents, fine fabric wash, liquid laundry detergents and household hard surface cleaners such as glass cleaners and bathroom cleaners. It is used as primary surfactant in shampoo, liquid soap, and bubble bath formulations. 收起 | |
| ALKOPON® N APH | Indorama Ventures | ALKOPON® N APH consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. The naturally-derived lauryl alcohol used to produce ALKOPON® N APH is derived from ...展开 ALKOPON® N APH consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. The naturally-derived lauryl alcohol used to produce ALKOPON® N APH is derived from palm kernel oil. It is a completely biodegradable sodium lauryl ether sulfate (27%). This product can be used in shampoos, liquid soaps, bubble baths, toothpastes, hand and dish washing detergents, fine fabric wash, liquid laundry detergents and household hard surface cleaners such as glass cleaners and bathroom cleaners. It is useful in these same applications with the added benefit of being preservative-free. This aspect allows the formulator flexibility in choosing formulation preservatives in order to meet efficacy and marketing requirements. 收起 | |
| ALKOPON® NS | Indorama Ventures | ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the ...展开 ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the main surfactant used as a detergent and foaming agent in toothpaste formulas. Due to its higher Krafft point compared to ether sulfates, it is an excellent choice for pearled formulations and cream cleansers. This product can be used in shampoos, liquid soaps, bubble baths, toothpastes, hand dishwashing detergents, fine fabric wash, liquid laundry detergents and household hard surface cleaners such as glass cleaners and bathroom cleaners. ALKOPON® NS is also used in polymerization of PVC, acrylic resin, vinyl acetates, acrylates, methacrylates, styrene, butadiene, etc. 收起 | |
| Ammonium Chloride | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Ammonium Chloride, in the form of a white powder, is an acid salt of ammonia. This product can be used in adhesives and as a constituent of dyeing processes. It contains no more than 0.70% water, and its pH lies between 4.0 and 5.8. | |
| Benzimidazolone Yellow 194 | Hangzhou Shine Chemical Co., Ltd. | Benzimidazolone Yellow 194, in the form of a yellow powder, is an organic dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, an average particle size between 250 and 350 nanomet...展开 Benzimidazolone Yellow 194, in the form of a yellow powder, is an organic dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, an average particle size between 250 and 350 nanometers, and an oil absorption of 40-70 g/100g. 收起 | |
| BUTYL DIGLYCOL | Indorama Ventures | BUTYL DIGLYCOL is a type of glycol ether, which is the result from the reaction of alcohols or phenol with ethylene oxide. It can be used in formulas of transparent disinfectants, multiuse type formulas and general degreasers. This product acts as a clean...展开 BUTYL DIGLYCOL is a type of glycol ether, which is the result from the reaction of alcohols or phenol with ethylene oxide. It can be used in formulas of transparent disinfectants, multiuse type formulas and general degreasers. This product acts as a cleaning agent in the solubilization of oily dirt, and as a surface active agent by lowering the surface tension of water. 收起 | |
| BUTYL GLYCOL | Indorama Ventures | BUTYL GLYCOL is a type of glycol ether, which is the result from the reaction of alcohols or phenol with ethylene oxide. It can be used in formulas of transparent disinfectants, multiuse type formulas and general degreasers. This product acts as a cleani...展开 BUTYL GLYCOL is a type of glycol ether, which is the result from the reaction of alcohols or phenol with ethylene oxide. It can be used in formulas of transparent disinfectants, multiuse type formulas and general degreasers. This product acts as a cleaning agent in the solubilization of oily dirt, and as a surface active agent by lowering the surface tension of water. 收起 | |
| BUTYL GLYCOL ACETATE | Indorama Ventures | BUTYL GLYCOL ACETATE is obtained from the reaction of the butyl ether derived from monoethylene glycol (BUTYL GLYCOL) with acetic acid. It is a clear, colorless liquid with a mild odor, and has low volatility at room temperature. It has low solubitlity in...展开 BUTYL GLYCOL ACETATE is obtained from the reaction of the butyl ether derived from monoethylene glycol (BUTYL GLYCOL) with acetic acid. It is a clear, colorless liquid with a mild odor, and has low volatility at room temperature. It has low solubitlity in water and is miscible with most organic solvents. 收起 | |
| BUTYL TRIGLYCOL | Indorama Ventures | BUTYL TRIGLYCOL is a type of glycol ether, which is the result from the reaction of alcohols or phenol with ethylene oxide. Ideal for use in leathers and hydraulic fluids. It results from the reaction of alcohols or phenol with ethylene oxide. The reacti...展开 BUTYL TRIGLYCOL is a type of glycol ether, which is the result from the reaction of alcohols or phenol with ethylene oxide. Ideal for use in leathers and hydraulic fluids. It results from the reaction of alcohols or phenol with ethylene oxide. The reactions to obtain these compounds and their molecular structures are shown in the figure below, starting from methanol and ethanol. This product has other denominations of Triethylene glycol butyl ether, TEGBE, and has a CAS No. of 143-22-6. 收起 | |
| Caustic Soda | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Caustic Soda, in the form of a glossy white granule or flake, is a dried form of lye. This product can be used in paper dyeing. It contains no more than 0.008% iron and no more than 0.05% sodium chloride. | |
| Chrome Oxide Green, Low Cr6+ Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Low Cr6+ Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing ap...展开 Chrome Oxide Green, Low Cr6+ Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. Its pH lies between 5 and 8. 收起 | |
| Chrome Oxide Green, Metallurgical Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Metallurgical Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. It can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing applica...展开 Chrome Oxide Green, Metallurgical Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. It can be used as a colorant in enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. It contains no more than 0.01% sulfur and no more than .1% iron oxide. 收起 | |
| Chrome Oxide Green, Pigment Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Pigment Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing ap...展开 Chrome Oxide Green, Pigment Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. Its pH lies between 6 and 8. 收起 | |
| Chrome Oxide Green, Refractory Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Refractory Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing...展开 Chrome Oxide Green, Refractory Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant for enamels and porcelain ware, as well as in sun-proof coatings and currency printing applications. It contains no more than .15% water. 收起 | |
| Chrome Oxide Green, Standard Grade | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chrome Oxide Green, Standard Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as for sun-proof coatings and currency printing a...展开 Chrome Oxide Green, Standard Grade, in the form of an amorphous olive green powder with a metallic sheen, is a mineral powder. This product can be used as a colorant in enamels and porcelain ware, as well as for sun-proof coatings and currency printing applications. Its pH lies between 5 and 8. 收起 | |
| Chromic Acid | Tianjin Minle Chemical Import & Export Trade Co., Ltd. | Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisono...展开 Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisonous and corrosive. 收起 | |
| C.I. Pigment Blue 1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 1, in the form of a blue powder, is a triarylcarbonium (PTMA) dye that can be used in printing ink applications. This product has a specific gravity approximately between 1.60 and 1.80, a bulk volume between 2.8 and 3.2 l/kg, and an aver...展开 C.I. Pigment Blue 1, in the form of a blue powder, is a triarylcarbonium (PTMA) dye that can be used in printing ink applications. This product has a specific gravity approximately between 1.60 and 1.80, a bulk volume between 2.8 and 3.2 l/kg, and an average particle size between 50 and 150 nanometers. 收起 | |
| C.I. Pigment Blue 15 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 15, in the form of a blue powder, is a copper phthalocyanine dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.50 and 1.80, a bulk volume between 2.0 and 2.4 l/kg, and an averag...展开 C.I. Pigment Blue 15, in the form of a blue powder, is a copper phthalocyanine dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.50 and 1.80, a bulk volume between 2.0 and 2.4 l/kg, and an average particle size between 50 and 120 nanometers. 收起 | |
| C.I. Pigment Blue 15:1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 15:1, in the form of a blue powder, is a copper-phthalocyanine dye that can be used in printing ink applications and paint systems. This product has a bulk volume between 2.0 and 2.4 l/kg, an average particle size between 40 and 140 nano...展开 C.I. Pigment Blue 15:1, in the form of a blue powder, is a copper-phthalocyanine dye that can be used in printing ink applications and paint systems. This product has a bulk volume between 2.0 and 2.4 l/kg, an average particle size between 40 and 140 nanometers, and a specific gravity between 1.55 and 1.75. 收起 | |
| C.I. Pigment Blue 15:2 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 15:2, in the form of a blue powder, is a copper-phthalocyanine dye that can be used in paint applications. This product has a specific gravity between 1.60 and 1.80, a bulk volume between 2.0 and 2.4 l/kg, and an average particle size be...展开 C.I. Pigment Blue 15:2, in the form of a blue powder, is a copper-phthalocyanine dye that can be used in paint applications. This product has a specific gravity between 1.60 and 1.80, a bulk volume between 2.0 and 2.4 l/kg, and an average particle size between 50 and 150 nanometers. 收起 | |
| C.I. Pigment Blue 15:3 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 15:3, in the form of a blue powder, is a copper-phthalocyanine blue dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 2.1 and 2.6 l/kg, a...展开 C.I. Pigment Blue 15:3, in the form of a blue powder, is a copper-phthalocyanine blue dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 2.1 and 2.6 l/kg, and an average particle size between 50 and 150 nanometers. 收起 | |
| C.I. Pigment Blue 15:4 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 15:4, in the form of a blue powder, is a copper-phthalocyanine dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.55 and 1.75, a bulk volume between 2.0 and 2.5 l/kg, and an...展开 C.I. Pigment Blue 15:4, in the form of a blue powder, is a copper-phthalocyanine dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.55 and 1.75, a bulk volume between 2.0 and 2.5 l/kg, and an average particle size between 50 and 120 nanometers. 收起 | |
| C.I. Pigment Blue 60 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 60, in the form of a blue powder, is an indanthrone dye that can be used in paint applications. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 2.6 and 3.0 l/kg, and an average particle size between 50 an...展开 C.I. Pigment Blue 60, in the form of a blue powder, is an indanthrone dye that can be used in paint applications. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 2.6 and 3.0 l/kg, and an average particle size between 50 and 120 nanometers. 收起 | |
| C.I. Pigment Blue 61 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 61, in the form of a blue powder, is a triarylcarbonium dye that can be used in printing ink applications. This product has a specific gravity of 1.05 to 1.20, a bulk volume of 2.8 to 3.2 l/kg, and an average particle size of 40 to 150 n...展开 C.I. Pigment Blue 61, in the form of a blue powder, is a triarylcarbonium dye that can be used in printing ink applications. This product has a specific gravity of 1.05 to 1.20, a bulk volume of 2.8 to 3.2 l/kg, and an average particle size of 40 to 150 nanometers. 收起 | |
| C.I. Pigment Blue 79 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Blue 79, in the form of a blue powder, is an aluminum phthalocyanine dye that can be used in printing ink applications. This product has a specific gravity of approximately 1.50 to 2.50, an average particle size of 20-50 nanometers, and a bul...展开 C.I. Pigment Blue 79, in the form of a blue powder, is an aluminum phthalocyanine dye that can be used in printing ink applications. This product has a specific gravity of approximately 1.50 to 2.50, an average particle size of 20-50 nanometers, and a bulk volume of 2.5 to 3.0 l/kg. 收起 | |
| C.I. Pigment Green 36 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Green 36, in the form of a green powder, is a copper-phthalocyanine pigment that can be used in printing ink applications and paint systems. This product has a specific gravity between 2.8 and 3.0, a bulk volume of 2.0-2.4 l/kg, and an averag...展开 C.I. Pigment Green 36, in the form of a green powder, is a copper-phthalocyanine pigment that can be used in printing ink applications and paint systems. This product has a specific gravity between 2.8 and 3.0, a bulk volume of 2.0-2.4 l/kg, and an average particle size between 40 and 100 nanometers. 收起 | |
| C.I. Pigment Green 7 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Green 7, in the form of a green powder, is a copper-phthalocyanine dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 2.00 and 2.20, a bulk volume between 2.0 and 2.4 l/kg, and an ...展开 C.I. Pigment Green 7, in the form of a green powder, is a copper-phthalocyanine dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 2.00 and 2.20, a bulk volume between 2.0 and 2.4 l/kg, and an average particle size between 40 and 120 nanometers. 收起 | |
| C.I. Pigment Orange 13 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Orange 13, in the form of an orange powder, is a disazopyrazolone dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 3.5 and 4.0 l/kg, and an a...展开 C.I. Pigment Orange 13, in the form of an orange powder, is a disazopyrazolone dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 3.5 and 4.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Orange 16 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Orange 16, in the form of an orange powder, is a diarylide dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.20 and 1.40, a bulk volume between 4.0 and 4.5 l/kg, and an average ...展开 C.I. Pigment Orange 16, in the form of an orange powder, is a diarylide dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.20 and 1.40, a bulk volume between 4.0 and 4.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Orange 34 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Orange 34, in the form of an orange powder, is a disazopyrazolone dye that can be used in printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.8 and 5.3 l/kg, and an average particle si...展开 C.I. Pigment Orange 34, in the form of an orange powder, is a disazopyrazolone dye that can be used in printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.8 and 5.3 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Orange 36 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Orange 36, in the form of an orange powder, is a benzimidazolone dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 4.0 and 4.5 l/kg, and an av...展开 C.I. Pigment Orange 36, in the form of an orange powder, is a benzimidazolone dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 4.0 and 4.5 l/kg, and an average particle size between 200 and 300 nanometers. 收起 | |
| C.I. Pigment Orange 43 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Orange 43, in the form of an orange powder, is a perinone dye that can be used in printing inks and paint systems. This product has a specific gravity between 1.50 and 1.80, a bulk volume between 3.2 and 3.6 l/kg, and an average particle size...展开 C.I. Pigment Orange 43, in the form of an orange powder, is a perinone dye that can be used in printing inks and paint systems. This product has a specific gravity between 1.50 and 1.80, a bulk volume between 3.2 and 3.6 l/kg, and an average particle size between 100 and 300 nanometers. 收起 | |
| C.I. Pigment Orange 5 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Orange 5, in the form of an orange powder, is a naphthol dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.60 and 1.80, a bulk volume of 2.8-3.2 l/kg, and an average particle si...展开 C.I. Pigment Orange 5, in the form of an orange powder, is a naphthol dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.60 and 1.80, a bulk volume of 2.8-3.2 l/kg, and an average particle size between 250 and 350 nanometers. 收起 | |
| C.I. Pigment Red 112 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 112, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.0 and 4.5 l/kg, and an average part...展开 C.I. Pigment Red 112, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.0 and 4.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 122 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 122, in the form of a red powder, is a dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.35 and 1.55, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size be...展开 C.I. Pigment Red 122, in the form of a red powder, is a dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.35 and 1.55, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 50 and 150 nanometers. 收起 | |
| C.I. Pigment Red 146 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 146, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 5.0 and 5.5 l/kg, and an average particle size between ...展开 C.I. Pigment Red 146, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 5.0 and 5.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 169 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 169, in the form of a red powder, is a triacrylcarbonium dye that can be used in printing ink applications. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 5.0 and 5.5 l/kg, and an average particle size be...展开 C.I. Pigment Red 169, in the form of a red powder, is a triacrylcarbonium dye that can be used in printing ink applications. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 5.0 and 5.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 170 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 170, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average part...展开 C.I. Pigment Red 170, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 150 and 250 nanometers. 收起 | |
| C.I. Pigment Red 176 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 176, in the form of a red powder, is a dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size be...展开 C.I. Pigment Red 176, in the form of a red powder, is a dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 177 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 177, in the form of a red powder, is an anthraquinone dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.35 and 1.55, a bulk volume between 4.5 and 5.0 l/kg, and an average p...展开 C.I. Pigment Red 177, in the form of a red powder, is an anthraquinone dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.35 and 1.55, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 184 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 184, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average part...展开 C.I. Pigment Red 184, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 185 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 185, in the form of a red powder, is a benzimidazolone dye that can be used in printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size betw...展开 C.I. Pigment Red 185, in the form of a red powder, is a benzimidazolone dye that can be used in printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 140 and 200 nanometers. 收起 | |
| C.I. Pigment Red 2 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 2, in the form of a red powder, is a naphthol AS dye that can be used in ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size b...展开 C.I. Pigment Red 2, in the form of a red powder, is a naphthol AS dye that can be used in ink applications and paint systems. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 22 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 22, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and in textiles. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particl...展开 C.I. Pigment Red 22, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and in textiles. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 23 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 23, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications, paint systems, and in textiles. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.2 and 4.7 l/kg, and an...展开 C.I. Pigment Red 23, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications, paint systems, and in textiles. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.2 and 4.7 l/kg, and an average particle size between 120 and 200 nanometers. 收起 | |
| C.I. Pigment Red 254 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 254, in the form of a red powder, is a DDP dye that can be used in paint systems. This product has a specific gravity between 1.55 and 1.75, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 200 and 280 nanomete...展开 C.I. Pigment Red 254, in the form of a red powder, is a DDP dye that can be used in paint systems. This product has a specific gravity between 1.55 and 1.75, a bulk volume between 4.5 and 5.0 l/kg, and an average particle size between 200 and 280 nanometers. 收起 | |
| C.I. Pigment Red 266 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 266, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 5.0 and 5.5 l/kg, and an average particle ...展开 C.I. Pigment Red 266, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 5.0 and 5.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 269 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 269, in the form of a red powder, is a naphthol AS dye that can be used in paint systems and printing ink applications. This product has a specific gravity between 1.35 and 1.55, a bulk volume between 5.0 and 5.5 l/kg, and an average part...展开 C.I. Pigment Red 269, in the form of a red powder, is a naphthol AS dye that can be used in paint systems and printing ink applications. This product has a specific gravity between 1.35 and 1.55, a bulk volume between 5.0 and 5.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 3 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 3, in the form of a red powder, is a monoazo dye that can be used in paint systems and printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.0 and 4.5 l/kg, and an average particle s...展开 C.I. Pigment Red 3, in the form of a red powder, is a monoazo dye that can be used in paint systems and printing ink applications. This product has a specific gravity between 1.30 and 1.50, a bulk volume between 4.0 and 4.5 l/kg, and an average particle size between 250 and 350 nanometers. 收起 | |
| C.I. Pigment Red 31 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 31, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.20 and 1.40, a bulk volume between 3.5 and 4.0 l/kg, and an average particle s...展开 C.I. Pigment Red 31, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.20 and 1.40, a bulk volume between 3.5 and 4.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 48:1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 48:1, in the form of a red powder, is a barium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 2.00 and 2.20, a bulk volume between 2.0 and 2.5 l/kg, and an average ...展开 C.I. Pigment Red 48:1, in the form of a red powder, is a barium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 2.00 and 2.20, a bulk volume between 2.0 and 2.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 48:2 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 48:2, in the form of a red powder, is a dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.5 and 1.7, a bulk volume between 2.2 and 2.6 l/kg, and an average particle size bet...展开 C.I. Pigment Red 48:2, in the form of a red powder, is a dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.5 and 1.7, a bulk volume between 2.2 and 2.6 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 48:3 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 48:3, in the form of a red powder, is a strontium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.60 and 1.90, a bulk volume between 2.2 and 2.6 l/kg, and an avera...展开 C.I. Pigment Red 48:3, in the form of a red powder, is a strontium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.60 and 1.90, a bulk volume between 2.2 and 2.6 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 48:4 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 48:4, in the form of a red powder, is a manganese-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.70 and 2.00, a bulk volume between 2.4 and 2.8 l/kg, and an avera...展开 C.I. Pigment Red 48:4, in the form of a red powder, is a manganese-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.70 and 2.00, a bulk volume between 2.4 and 2.8 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 49:1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 49:1, in the form of a red powder, is a barium-complex naphthol dye that can be used in printing ink applications. This product has a specific gravity between 1.60 and 1.80, a bulk volume between 2.3 and 2.7 l/kg, and an average particle ...展开 C.I. Pigment Red 49:1, in the form of a red powder, is a barium-complex naphthol dye that can be used in printing ink applications. This product has a specific gravity between 1.60 and 1.80, a bulk volume between 2.3 and 2.7 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 52:2 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 52:2, in the form of a red powder, is a manganese-complex dye that can be used in paint systems. This product has a specific gravity between 1.50 and 1.80, a bulk volume between 2.5 and 3.0 l/kg, and an average particle size between 100 a...展开 C.I. Pigment Red 52:2, in the form of a red powder, is a manganese-complex dye that can be used in paint systems. This product has a specific gravity between 1.50 and 1.80, a bulk volume between 2.5 and 3.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 53:1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 53:1, in the form of a red powder, is a barium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.70 and 1.90, a bulk volume between 3.0 and 3.5 l/kg, and an average ...展开 C.I. Pigment Red 53:1, in the form of a red powder, is a barium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.70 and 1.90, a bulk volume between 3.0 and 3.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 57:1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 57:1, in the form of a red powder, is a calcium-complex dye that can be used in offset ink applications. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 2.8 and 3.2 l/kg, and an average particle size betwe...展开 C.I. Pigment Red 57:1, in the form of a red powder, is a calcium-complex dye that can be used in offset ink applications. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 2.8 and 3.2 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 63:1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 63:1, in the form of a red powder, is a calcium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.45 and 1.65, a bulk volume between 2.4 and 2.8 l/kg, and an average...展开 C.I. Pigment Red 63:1, in the form of a red powder, is a calcium-complex dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.45 and 1.65, a bulk volume between 2.4 and 2.8 l/kg, and an average particle size between 100 and 250 nanometers. 收起 | |
| C.I. Pigment Red 8 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 8, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.20 and 1.50, a bulk volume between 3.5 and 4.0 l/kg, and an average particle si...展开 C.I. Pigment Red 8, in the form of a red powder, is a naphthol AS dye that can be used in printing ink applications and textiles. This product has a specific gravity between 1.20 and 1.50, a bulk volume between 3.5 and 4.0 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Red 81 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Red 81, in the form of a red powder, is a triarylcarbonium dye that can be used in printing ink applications. This product has a specific gravity between 1.80 and 2.20, a bulk volume between 3.0 and 3.5 l/kg, and an average particle size betw...展开 C.I. Pigment Red 81, in the form of a red powder, is a triarylcarbonium dye that can be used in printing ink applications. This product has a specific gravity between 1.80 and 2.20, a bulk volume between 3.0 and 3.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Violet 1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Violet 1, in the form of a violet powder, is a triarylcarbonium (PTMA) dye that can be used in printing ink applications. This product has a specific gravity between 2.20 and 2.50, a bulk volume between 2.5 and 3.0 l/kg, and an average partic...展开 C.I. Pigment Violet 1, in the form of a violet powder, is a triarylcarbonium (PTMA) dye that can be used in printing ink applications. This product has a specific gravity between 2.20 and 2.50, a bulk volume between 2.5 and 3.0 l/kg, and an average particle size between 50 and 200 nanometers. 收起 | |
| C.I. Pigment Violet 19 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Violet 19, in the form of a violet powder, is a β-quinacridone dye that can be used in printing inks and paint applications. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.0 and 4.5 l/kg, and an average par...展开 C.I. Pigment Violet 19, in the form of a violet powder, is a β-quinacridone dye that can be used in printing inks and paint applications. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 4.0 and 4.5 l/kg, and an average particle size between 50 and 150 nanometers. 收起 | |
| C.I. Pigment Violet 23 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Violet 23, in the form of a violet powder, is a dioxazine dye that can be used in printing ink applications, paint systems, and in textiles. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 2.5 and 3.0 l/kg, an...展开 C.I. Pigment Violet 23, in the form of a violet powder, is a dioxazine dye that can be used in printing ink applications, paint systems, and in textiles. This product has a specific gravity between 1.40 and 1.60, a bulk volume between 2.5 and 3.0 l/kg, and an average particle size between 35 and 120 nanometers. 收起 | |
| C.I. Pigment Violet 27 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Violet 27, in the form of a violet powder, is a triarylcarbonium dye that can be used in printing ink applications. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 2.8 and 3.5 l/kg, and an average particle siz...展开 C.I. Pigment Violet 27, in the form of a violet powder, is a triarylcarbonium dye that can be used in printing ink applications. This product has a specific gravity between 1.50 and 1.70, a bulk volume between 2.8 and 3.5 l/kg, and an average particle size between 100 and 300 nanometers. 收起 | |
| C.I. Pigment Violet 3 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Violet 3, in the form of a violet powder, is a triarylcarbonium dye that can be used in water-based or offset ink applications. This product has a specific gravity between 1.50 and 2.50, a bulk volume between 2.0 and 2.6 l/kg, and an average ...展开 C.I. Pigment Violet 3, in the form of a violet powder, is a triarylcarbonium dye that can be used in water-based or offset ink applications. This product has a specific gravity between 1.50 and 2.50, a bulk volume between 2.0 and 2.6 l/kg, and an average particle size between 50 and 200 nanometers. 收起 | |
| C.I. Pigment Yellow 1 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Yellow 1, in the form of a yellow powder, is an organic monoazo dye that can be used in water-based ink applications and in water-based paint systems. This product has a specific gravity between 1.25 and 1.45, a bulk volume between 4.0 and 4....展开 C.I. Pigment Yellow 1, in the form of a yellow powder, is an organic monoazo dye that can be used in water-based ink applications and in water-based paint systems. This product has a specific gravity between 1.25 and 1.45, a bulk volume between 4.0 and 4.5 l/kg, and an average particle size between 100 and 200 nanometers. 收起 | |
| C.I. Pigment Yellow 110 | Hangzhou Shine Chemical Co., Ltd. | C.I. Pigment Yellow 110, in the form of a yellow powder, is an isoindoline dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.50 and 1.85, a bulk volume between 3.0 and 3.5 l/kg, and an avera...展开 C.I. Pigment Yellow 110, in the form of a yellow powder, is an isoindoline dye that can be used in printing ink applications and paint systems. This product has a specific gravity between 1.50 and 1.85, a bulk volume between 3.0 and 3.5 l/kg, and an average particle size between 200 and 300 nanometers. 收起 |
