| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...展开 Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...展开 Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...展开 Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...展开 Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF200W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为200um。 | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF300W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为300um。 | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G是一种白色粉末状或纤维状的，广泛应用于建筑行业的天然纤维素添加物。 Celofiber® CF450G取材于天然纤维素，通过特殊的制造工艺加工生产。Celofiber® CF450G木质纤维在自然状态下不溶于水。Celofiber® CF450G的胶粘功能提升了抹灰和填缝剂的抗垂挂性，并大幅度提高了稳定性，因此无论涂 层是厚是薄，都能快速施工，不会从垂直面滑下。 Celofiber® CF450G的三维网状结构能减少收缩，防止干燥过程中产生龟裂。Celofiber® CF...展开 Celofiber® CF450G是一种白色粉末状或纤维状的，广泛应用于建筑行业的天然纤维素添加物。 Celofiber® CF450G取材于天然纤维素，通过特殊的制造工艺加工生产。Celofiber® CF450G木质纤维在自然状态下不溶于水。Celofiber® CF450G的胶粘功能提升了抹灰和填缝剂的抗垂挂性，并大幅度提高了稳定性，因此无论涂 层是厚是薄，都能快速施工，不会从垂直面滑下。 Celofiber® CF450G的三维网状结构能减少收缩，防止干燥过程中产生龟裂。Celofiber® CF450G可延长产品的储存期，从里到外的液态移动可防止薄膜产生。这款产品的纤维长度为450um。 收起 | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF450W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为450um。 | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF500W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为500um。 | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W是一款自然状态不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF60W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为60um。 | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W是在自然状态下存留的不溶于水的纤维素。纤维素纤维是一种用于建筑化工产品中的粉状或纤维状的纤维素添加剂。其结构纤维胶行为在膏剂和填充化合物中的抗流挂效果方面有出众的影响力。它可以在实质上改善绿色稳定性，因此可以在单一步骤中完成厚或薄层的应用，同时使其在垂直表面滑动。其三维纤维骨架提供更少的收缩，有助于防止在干燥过程中形成裂纹。Celofiber® CF800W可以延长储存期，从内到外的液体迁移可以抑制膜的形成。这款产品的纤维长度为800um。 | |
| Celopro® CS160 | Celotech Chemical Co., Ltd. | Celopro® C (CMC)系列羧甲基纤维素是一种多样化的水溶性凝胶,其特性为众多工业应用提供均衡性性能。CMC属于多功能水状胶质，通过其运作方式为配方提供良好的性能。 | |
| Celopro® CS170 | Celotech Chemical Co., Ltd. | Celopro® C (CMC)系列羧甲基纤维素是一种多样化的水溶性凝胶,其特性为众多工业应用提供均衡性性能。CMC属于多功能水状胶质，通过其运作方式为配方提供良好的性能。 | |
| Celopro® CS180 | Celotech Chemical Co., Ltd. | Celopro® C (CMC)系列羧甲基纤维素是一种多样化的水溶性凝胶,其特性为众多工业应用提供均衡性性能。CMC属于多功能水状胶质，通过其运作方式为配方提供良好的性能。 | |
| Celopro® HHB15S | Celotech Chemical Co., Ltd. | Celopro®HHB15S是具有中等粘度的羟乙基纤维素（HEC）。它是非离子型的水溶性物质，可以在乳胶漆，个人护理产品和家用清洁产品等水性体系中用作增稠剂。 | |
| Celopro® HHB30S | Celotech Chemical Co., Ltd. | Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleanin...展开 Celopro® HHB30S is a medium high viscosity type of Hydroxyethyl cellulose (HEC). It is a non-ionic, water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating, household cleaning products and so on, which provides water retention, binding power, protective colloid, biostable, etc. for systems. 收起 | |
| Celopro® HHB50S | Celotech Chemical Co., Ltd. | Celopro®HHB50S是一种具有延迟溶解度的高粘度羟乙基纤维素（HEC）。它是非离子型水溶性材料，可以在乳胶漆，个人护理产品和家用清洁产品等水性体系中用作增稠剂。 | |
| Celopro® HHB60S | Celotech Chemical Co., Ltd. | Celopro® HHB60S是一种具有延迟溶解度的高粘度羟乙基纤维素（HEC）。它是非离子型水溶性材料，可以在乳胶漆，个人护理产品和家用清洁产品等水性体系中用作增稠剂。 | |
| Celopro® HHB70S | Celotech Chemical Co., Ltd. | Celopro® HHB70S is an extremely high viscosity Hydroxyethyl cellulose (HEC). It is water-soluble material which can be applied as a thickener for water-borne systems including latex paints, interior and exterior coating and so on. | |
| Celopro® ME10M P | Celotech Chemical Co., Ltd. | Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...展开 Celopro® ME10M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. 收起 | |
| Celopro® ME20M P | Celotech Chemical Co., Ltd. | Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, ex...展开 Celopro® ME20M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based trowelling compounds, gypsum-based jointing compounds, exterior insulating finishing systems, and more. 收起 | |
| Celopro® ME30M P | Celotech Chemical Co., Ltd. | Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...展开 Celopro® ME30M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. 收起 | |
| Celopro® ME40M P | Celotech Chemical Co., Ltd. | Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer...展开 Celopro® ME40M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-lime plasters, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, and gypsum-lime-plaster. 收起 | |
| Celopro® ME4M P | Celotech Chemical Co., Ltd. | Celopro® ME4M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement based grouts and repair mortars. | |
| Celopro® ME50M P | Celotech Chemical Co., Ltd. | Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-base...展开 Celopro® ME50M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, cement-based skim coats, gypsum-based thin layer plasters, cement-based trowlling compounds, gypsum-based machine applied plasters, and decorative renders. 收起 | |
| Celopro® ME60M P | Celotech Chemical Co., Ltd. | Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, ...展开 Celopro® ME60M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as tile adhesives, gypsum-lime-plasters, and gypsum-based plasters, thin layer plasters, and machine applied plasters. 收起 | |
| Celopro® ME6M P | Celotech Chemical Co., Ltd. | Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based j...展开 Celopro® ME6M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as gypsum- and cement-based plasters, mineral-based decorative renders, and gypsum-based jointing compounds. 收起 | |
| Celopro® ME70M P | Celotech Chemical Co., Ltd. | Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and th...展开 Celopro® ME70M P is a Hydroxypropyl Methylcellulose powder with high etherification. It helps to efficiently thicken and provide water retention in formulations such as cement-based plasters and tile adhesives, gypsum-based plasters, joint fillers, and thin layer plasters. 收起 | |
| Celopro® MH15M P | Celotech Chemical Co., Ltd. | Celopro® MH15M P是一种中等粘度的羟乙基甲基纤维素（HEMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。Celopro®MH品牌下的产品是高效的添加剂，用于改善建筑材料的质量和加工特性，包括石膏和粉刷，灰泥，瓷砖黏合剂，密封剂，以及乳胶漆。 | |
| Celopro® MH40MP | Celotech Chemical Co., Ltd. | Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered...展开 Celopro® MH40M P is a high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. These products, offered under the CELOPRO™ MH brand, are highly effective additives used to improve the quality and processing characteristics of building materials such as plasters and renders, mortars, tile adhesives, joint compounds and emulsion paints. 收起 | |
| Celopro® MH55M FP | Celotech Chemical Co., Ltd. | Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retent...展开 Celopro® MH55M FP is a very high viscosity type of Hydroxyethyl methylcellulose (HEMC) with fine particle size. It provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. This product has been applied in tile adhesives, skim coats, thin layer plasters, gypsum based trowelling compounds, machine applied plasters, and decorative renders. 收起 | |
| Celopro® MH70M FP | Celotech Chemical Co., Ltd. | Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ap...展开 Celopro® MH70M FP is a extremely high viscosity type of Hydroxyethyl methylcellulose (HEMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in gypsum and cement based plasters, joint fillers, machine-applied plasters, tile adhesives, gypsum-lime-plasters, thin layer plasters, and gypsum based plasters. 收起 | |
| Celopro® MK20M FP | Celotech Chemical Co., Ltd. | Celopro® MK20M FP是一种非改性低粘度羟丙基甲基纤维素（HPMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。Celopro®非改性型提供对干粉砂浆的灵活性和易于配方性。 | |
| Celopro® MK30M FP | Celotech Chemical Co., Ltd. | Celopro® MK30M FP是一种非改性高粘度羟丙基甲基纤维素（HPMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。Celopro®非改性型提供对干粉砂浆的灵活性和易于配方性。它可以用作瓷砖黏合剂，粉灰层，修平材料等应用的粘稠剂。 | |
| Celopro® MK400 P | Celotech Chemical Co., Ltd. | Celopro® MK400 P是低粘度型羟丙基甲基纤维素（HPMC）。它是专为作为自流平化合物而开发的。 | |
| Celopro® MK40M FP | Celotech Chemical Co., Ltd. | Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-mod...展开 Celopro® MK40M FP is a non modified high viscosity Hydroxypropyl methylcellulose (HPMC) which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. Celopro® non-modified type offers flexibility to dry mortar companies for easy formulation. It can be applied as thickener in tile adhesives, cement-lime-plasters, skim coats, plasters, machine applied plasters, joint fillers and thermal insulation systems. 收起 | |
| Celopro® MK4M FP | Celotech Chemical Co., Ltd. | Celopro® MK4M FP是一种非改性低粘度羟丙基甲基纤维素（HPMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。 | |
| Celopro® MK60M FP | Celotech Chemical Co., Ltd. | Celopro® MK60M FP是一种具有极高粘度的羟丙基甲基纤维素（HPMC），提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。 | |
| Celopro® MK6M FP | Celotech Chemical Co., Ltd. | Celopro® MK6M FP是一种非改性低粘度羟丙基甲基纤维素（HPMC），它可以提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性以及具有保水能力。 | |
| Celopro® MK70M FP | Celotech Chemical Co., Ltd. | Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be ...展开 Celopro® MK70M FP is a extremely high viscosity type of Hydroxypropyl methylcellulose (HPMC), which provides many of the same benefits as other methylcellulose derivatives, such as the ability to efficiently thicken and provide water retention. It can be applied in plaster, joint filler, tile adhesive, gypsum-lime-plasters, thin layer plasters etc. 收起 | |
| Celopro® MK70MS FP | Celotech Chemical Co., Ltd. | Celopro® MK70MS FP是一种有表面处理效果，并具有极高粘度的羟丙基甲基纤维素（HPMC）。它提供多种与其它甲基纤维素衍生物相似的优势，如有效的增稠性，并提供保水能力。这款产品可以在石膏、接缝填料，花砖胶黏剂，石灰泥和薄层石灰中应用。 | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| Liquid Chlorine | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine is chlorine gas which has been dried, chilled, pressurized, and converted into liquid. This product has a purity of 99.5 percent and a total chloromethanes weight of 175 ppm. Liquid Chlorine is used in various manufacturing applications. | |
| Liquid Chlorine (Pesticide) | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine (Pesticide) is a green to yellow gas which has been turned into an amber liquid. This product has a purity of 99.5 percent and a chloroform weight of 75 ppm. Liquid Chlorine (Pesticide) is used in various manufacturing applications. | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Methyl Chloride | Occidental Chemical Corp. (OxyChem) | Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: ...展开 Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: cosmetics, suto polishes, furniture polishes, and paper coatings. 收起 | |
| Methylene Chloride - Aerosol Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in...展开 Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations. 收起 | |
| Methylene Chloride - Decaffeination Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methyl...展开 Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methylene Chloride - Decaffeination Grade is used as a solvent for pharmaceutical coatings. 收起 | |
| Methylene Chloride - Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a de...展开 Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a degreasing agent for various temperature sensitive parts. 收起 | |
| Methylene Chloride - Special Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chlori...展开 Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chloride - Special Grade is used as an auxiliary-blowing agent in the production of slab-stock flexible polyurethane foams. 收起 | |
| Methylene Chloride - Technical Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene C...展开 Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene Chloride - Technical Grade is used as an a solvent in paint removers and paint mask cleaners. 收起 | |
| NT-552 | Changzhou Niutang Chemical Plant | NT-552 is a white powdered curing agent. It is widely used for its stabilizing, adhesive and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| Perchloroethylene - Fluorocarbon (PTAP) Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120....展开 Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Fluorocarbon (PTAP) Grade is primarily used in metal and dry cleaning. 收起 | |
| Perchloroethylene - Industrial Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between ...展开 Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Industrial Grade is used in a variety of applications which require cold-cleaning operations. 收起 | |
| Perchloroethylene - Isomerization Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomer...展开 Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomerization and regeneration applications. 收起 | |
| Perchloroethylene - Technical Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Tech...展开 Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Technical Grade is used in fabric finishes, rubber, silicons, adhesives, and paint removers. 收起 | |
| Perchloroethylene - Vapor Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Per...展开 Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Perchloroethylene - Vapor Degreasing Grade is used in the removal of high melting point pitches and waxes. 收起 | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展开 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| Resiprene 36 | PT. Industri Karet Nusantara | Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in ...展开 Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in protective coatings, printing inks, marine paints, and back mirror tapes. 收起 | |
| Sodium Hypochlorite | Occidental Chemical Corp. (OxyChem) | Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textil...展开 Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textiles, water purification, medicine, fungicides, swimming pool disinfectants, and germicides. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展开 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展开 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| TGIC-D | Changzhou Niutang Chemical Plant | TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB s...展开 TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. 收起 | |
| TGIC-G | Changzhou Niutang Chemical Plant | TGIC-G is a white granule with low UV absorption. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| TGIC-P | Changzhou Niutang Chemical Plant | TGIC-P is a white powder with high heat and chemical resistance. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant in...展开 TGIC-P is a white powder with high heat and chemical resistance. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. 收起 | |
| Uniphur Black BRN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Black BRN is a Sulphur Dyestuff with a Color Index Number of Black 1. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. | |
| Uniphur Blue 2BN | UNIVERSAL DYECHEM PVT. LTD. | Uniphur Blue 2BN is a Sulphur Dyestuff with a Color Index of Blue 7. This product is used for cotton, viscose and linen fibers as well as an additive in paints, coatings and inks. |
