| 133 Resin | Guangzhou Baohui Resin Co., Ltd. | 133 Resin is a resin synthesized from chloride acetate and nitrocotton. This clear, transparent liquid has arrangement properties in electroplated silver, and provides toughness, corrosion resistance, strong viscosity, and plasticity to paints and photogr...展开 133 Resin is a resin synthesized from chloride acetate and nitrocotton. This clear, transparent liquid has arrangement properties in electroplated silver, and provides toughness, corrosion resistance, strong viscosity, and plasticity to paints and photogravure inks. 收起 | |
| 161A | Guangzhou Baohui Resin Co., Ltd. | 161A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It has alcohol resistance, wear resistance, harness and handfeel, and is capable of polyurethane and ultraviolet finishing. Functioning to make aluminum silver paste uniform on co...展开 161A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It has alcohol resistance, wear resistance, harness and handfeel, and is capable of polyurethane and ultraviolet finishing. Functioning to make aluminum silver paste uniform on coatings, 161A also provides an electroplated effect on coatings. 收起 | |
| 179A | Guangzhou Baohui Resin Co., Ltd. | 179A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It is resistant to high temperatures, does not yellow, and provides an electroplated effect through the use of silver paste. 179A is commonly used in the surface coating of automo...展开 179A is a thermoplastic acrylic resin appearing as a clear, viscous liquid. It is resistant to high temperatures, does not yellow, and provides an electroplated effect through the use of silver paste. 179A is commonly used in the surface coating of automobiles, motorcycles, and other metal products. 收起 | |
| 6400-7D | Guangzhou Baohui Resin Co., Ltd. | 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of U...展开 6400-7D is an acrylic acid resin appearing as a clear, transparent liquid. It increases the strength of paint membranes based on various energies produced by UV conduction and solidification. 6400-7D is most commonly used to reduce the solidification of UV concentration in the presence of high energy and present cracking in thick membranes. 收起 | |
| 75-62S Acrylic Resin | Guangzhou Baohui Resin Co., Ltd. | 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resist...展开 75-62S Acrylic Resin is a light-cured primer thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring compatibility with nitrocotton and cellulose acetate, 75-62S Acrylic Resin adheres to UV light-cured paint films to provide resistance to water boning and high temperatures when used with UV. 收起 | |
| 75-66S | Guangzhou Baohui Resin Co., Ltd. | 75-66S is a thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring intermiscibility with nitrocotton and butyl acetate fiber, it is used as an additive in self-drying acrylic resin paints. The basic paint film produced has gloss, ...展开 75-66S is a thermoplastic acrylic resin appearing as a clear, transparent liquid. Featuring intermiscibility with nitrocotton and butyl acetate fiber, it is used as an additive in self-drying acrylic resin paints. The basic paint film produced has gloss, adhesion, chemical resistance, and a silver powder arrangement effect. 62-66S also provides water, humidity, and heat resistance. 收起 | |
| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...展开 Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. 收起 | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...展开 Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. 收起 | |
| BH-113 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings...展开 BH-113 UV Resin is a modified urethane acrylate of the middle functional group. This clear, transparent liquid can enhance the adhesion to metal and vacuum electroplating surface, improve the leveling status, and eliminate the spot and pinhole of coatings. BH-113 UV Resin enhances coating surface cleanness and humid packaging performance of pigments, and water boiling resistance of coatings. 收起 | |
| BH-1300 | Guangzhou Baohui Resin Co., Ltd. | BH-1300 is a modified resin synthesized from chloride acetate and nitrocotton. Appearing as a clear liquid, features include high toughness, corrosion resistance, strong viscosity, and high plasticity. BH-1300 finds application in paints for electrosilver...展开 BH-1300 is a modified resin synthesized from chloride acetate and nitrocotton. Appearing as a clear liquid, features include high toughness, corrosion resistance, strong viscosity, and high plasticity. BH-1300 finds application in paints for electrosilvering top coats, and photogravure inks. 收起 | |
| BH-2300 | Guangzhou Baohui Resin Co., Ltd. | BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling...展开 BH-2300 is a modified acrylic resin appearing as a light yellow liquid. The surface of the paint membrane has photo mask effect, anti-alcohol, excellent laser carving effect and layer density. It can be used as UV primer and compatible to the anti-falling auxiliary. BH-2300 is commonly used in the formulation of coatings requiring an electroplating effect. 收起 | |
| BH-233 | Guangzhou Baohui Resin Co., Ltd. | BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitabl...展开 BH-233 is a mixture of modified acrylic acid resin and solvent appearing as a light yellow liquid. It provides a photo mask effect, laser carving effect, and layer density to the surface of paint membranes. BH-233 can be used as a UV primer and is suitable for the formulation of electroplating effects in coatings. 收起 | |
| BH-533 | Guangzhou Baohui Resin Co., Ltd. | BH-533 is a dual-function PUA resin with weathering resistance and flexibility. This clear, transparent liquid has resistance to yellowing, and high and low temperature and thermal cycling performance. BH-533 finds application in UV plastic coatings. | |
| BH-6200-3G | Guangzhou Baohui Resin Co., Ltd. | BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press ...展开 BH-6200-3G is a polyurethane acrylic acid oligomer with comprehensive performance. This clear, transparent liquid provides leveling and waterproof properties, and RCA resistance. It is commonly applied to laptop UV, shells of mobile phones, and key-press UV to overcome whitening, pinhole and sagging problems in thick coatings. 6200-3G finds application in NB UV plastic paint and mobile UV plastic paints. 收起 | |
| BH-66 UV Resin | Guangzhou Baohui Resin Co., Ltd. | BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption qua...展开 BH-66 UV Resin is a modified polyester acrylate featuring UV radiation solidification performance. This clear, transparent liquid functions as a UV resin and enhances the light solidification speed rate in printing ink systems, reduces the consumption quantity of the photo initiator, and enhances the proportion of formula middle pigment and filling. BH-66 has adhesion force, hardness, and bruise resistance performance. It can be used in bruise-resistant coating systems. 收起 | |
| BH-9002 | Guangzhou Baohui Resin Co., Ltd. | BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties...展开 BH-9002 is a mirror silver resin appearing as a light yellow powder. Functions include strengthening adhesion, viscosity, rigidness, hardness, and chemical resistance. BH-9002 finds application in coatings requiring waterproof and anti-chemical properties. 收起 | |
| BH368 | Guangzhou Baohui Resin Co., Ltd. | BH368 is an acrylic polyester resin appearing as a transparent liquid. This product does not yellow, provides flexibility, and finds application in varnish finishes of ultraviolet ray solidification and printing inks. | |
| BH382 | Guangzhou Baohui Resin Co., Ltd. | BH382 is a UV resin appearing as a transparent liquid. This product is commonly used for the preparation of ultraviolet solidification wood coatings of half matt, matt, or full matt. BH382 also finds application as varnish for UV curing and printing inks. | |
| Burez® K79 | Lawter | Burez® K79 is a potassium soap of modified rosin with 80% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier for water-based adhesives. | |
| Burez® NA18 502D | Lawter | Burez® NA18 502D is a sodium soap of stabilized rosin with 18% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system as well as in adhesives, particularly bottle labeling, in ad...展开 Burez® NA18 502D is a sodium soap of stabilized rosin with 18% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system as well as in adhesives, particularly bottle labeling, in addition to uses in pigment resination. 收起 | |
| Burez® NA40 502D | Lawter | Burez® NA40 502D is a sodium soap of stabilized rosin with 40% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with added applications in pigment resination and adhesives. | |
| Burez® NK25 502D | Lawter | Burez® NK25 502D is a potassium soap of stabilized rosin with 25% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with applications also in adhesives and pigment resinatio...展开 Burez® NK25 502D is a potassium soap of stabilized rosin with 25% solids, good stability and a low level of unsaponifiables. It is mainly used as an emulsifier in the emulsion polymerization system with applications also in adhesives and pigment resination. 收起 | |
| Burez® NK40 502D | Lawter | Burez® NK40 502D is a sodium and potassium soap of stabilized rosin with 40% solids, good stability and a low level of unsaponifiables. It is mostly used as an emulsifier in the emulsion polymerization system, in pigment resination and in additives. | |
| Cinergi™ 1060 | Lawter | Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss...展开 Cinergi™ 1060 is a sheet-fed free-flow varnish that is tack stable and retains body in an ink at high shear temperatures. Its lithographic characteristics ensure the varnish produces a high print performance in long and short press runs. It has high gloss, good water balance with fast setting and low misting properties as added benefits. Cinergi™ 1060 is used in sheet-fed inks and wetting varnishes. 收起 | |
| Cinergi™ 1061 | Lawter | Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color develo...展开 Cinergi™ 1061 is a sheet-fed fast setting gel varnish with high solids and medium quickset features that give it greater synergy and compatibility with a broad range of color systems. Inks that use the gel varnish show higher gloss and better color development and water balance. Cinergi™ 1061 is used in sheet-fed inks. 收起 | |
| Cinergi™ 2000 E | Lawter | Cinergi™ 2000 E is a special varnish that is 100% non-volatile and is based on modified vegetable oil blends. The product displays high gloss, low bronzing and good film formation in special inks such as sheet-fed, metal deco and web-fed applications. | |
| Cinergi™ 8710 C | Lawter | Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C als...展开 Cinergi™ 8710 C is a sheet-fed gel varnish that is 78% non-volatile and is from phenolic modified rosin-based resins, vegetable oils, mineral distillates and gelling agents. It is fast setting and has good flow and high gloss features. Cinergi™ 8710 C also possesses good transfer, tack stability with good shear and heat resistance. The varnish shows good water balance with a high resistance to water. It is used as a let down varnish or gel in quickset offset inks or sheet-fed inks. 收起 | |
| Cinergi™ 8735 C | Lawter | Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows ...展开 Cinergi™ 8735 C is a completely non-volatile let down varnish based on gelling agents, ester solvents, vegetable oil and phenolic-modified rosin-based resins. It displays good color strength along with gloss and fast setspeeds. The gel varnish also shows good tack stability and a high resistance to water. Cinergi™ 8735 C is used as a let down varnish in quickset offset and sheet-fed offset inks and a variety of other offset inks. 收起 | |
| Cinergi™ 8760 C | Lawter | Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish show...展开 Cinergi™ 8760 C is a soya bean oil sheet-fed gel varnish with an 83% non-volatile composition and is based on soya bean oil, gelling agents, mineral distillates and phenolic-modified rosin-based resins. With 27% soya bean oil composition, the varnish shows good color strength and flow, combined with gloss and a fast setspeed. It also has good tack stability and a high resistance to water. Cinergi™ 8760 C is used as a let down varnish or gel in quickset offset and sheet-fed offset inks. 收起 | |
| Decotherm™ 100C | Lawter | Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminu...展开 Decotherm™ 100C is a metal decorating varnish created for inks that are used on drawn aluminum cans that are printed on a spindle press. It is used in standard steel and tin plate lithographic inks because of its faster cure rate. Apart from drawn aluminum cans and steel and tin plate lithographic inks, Decotherm™ 100C is also used on color cans, but not on white cans. 收起 | |
| Decotherm™ 1720C | Lawter | Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™...展开 Decotherm™ 1720C is a metal decorating varnish that has been created for inks applied on drawn aluminum cans which are printed on a spindle press. It is used in standard steel and tin plate lithographic inks as a result of its faster cure rate. Decotherm™ 1720C has good pigment wetting and scratch resistance properties and apart from drawn aluminum cans and steel and tin plate lithographic inks, is also suitable for use in color cans and not white cans. 收起 | |
| Decotherm™ 210 E | Lawter | Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing appli...展开 Decotherm™ 210 E is a 65% hydroxyl functional polyester resin that has high gloss, good printability and adhesion and good pigment wetting properties. Decotherm™ 210 E is meant for metal deco 2-piece cans, colored and white inks and spindle printing applications. 收起 | |
| Decotherm™ 260 E | Lawter | Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal d...展开 Decotherm™ 260 E is a polyester resin dissolved in tripropylene glycol that has the benefit of high pigment wetting, gloss, flow and transfer on high speed presses. It also has good adhesion to metals which is why it is considered ideal for use in metal deco inks. Such inks use the spindle printing or dry offset system of printing on 2-piece cans. 收起 | |
| Decotherm™ 290 E | Lawter | Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece...展开 Decotherm™ 290 E is a structured polyester resin that has low tack and misting properties, shows good transfer on high speed presses and displays adhesion to metals. It is used in metal deco inks using the spindle printing or dry offset method for 2-piece cans. It shows good color retention and is also used in white and colored ink applications. 收起 | |
| DPHA-4056 | Guangzhou Baohui Resin Co., Ltd. | DPHA-4056 is a UV monomer appearing as a transparent, light yellow liquid. Featuring fast solidification, high hardness, bruise resistance, and low stimulation, DPHA-4056 finds application in coatings, printing inks, varnish paints, and adhesives. | |
| Eco-Rez™ 350 C | Lawter | Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealan...展开 Eco-Rez™ 350 C is a high viscosity rosin ester with a high viscosity and showing good tolerance for low KB oils. It is primarily an offset ink, but has the potential to be used in other applications like pigment dispersions, coatings and adhesives, sealants and heat resistant inks. 收起 | |
| Eco-Rez™ 4237 C | Lawter | Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a...展开 Eco-Rez™ 4237 C is a rosin-modified resin that is formaldehyde and phenol-free, showing low or medium solubility together with a high viscosity in mineral distillates. Compared to other phenolic rosin resins, it gives better gel response, lower tack and a wider water window. Other advantages include good run resistance, low yellowing and odor and a high structure. Eco-Rez™ 4237 C is used in offset, web offset, heatset and coldset applications as well as in sheet-fed and gloss offsets and low odor inks. Lower color makes it ideal for use in overprint varnishes. 收起 | |
| Eco-Rez™ 9710 A | Lawter | Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images ...展开 Eco-Rez™ 9710 A is a phenol formaldehyde-free resin with a low-structured rosin resin providing good pigment wetting characteristics. It is part of the family of Eco-Rez™ products offering water balance and rheological stability with sharp imprint images during long and high-speed press runs. Eco-Rez™ 9710 A is ideally suited to be used in sheet-fed, heatset and coldset applications. 收起 | |
| Eco-Rez™ 9730 A | Lawter | Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the...展开 Eco-Rez™ 9730 A is a phenol formaldehyde-free resin that is part of a new generation of resins with greater rheological stability, sharp imprint images and water balance stability during long and high-speed press runs. Unlike prior phenol-free resins, the product provides a more sustainable chemistry option with improved levels of performance. Eco-Rez™ 9730 A is used in all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Eco-Rez™ 9760 A | Lawter | Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print ...展开 Eco-Rez™ 9760 A is a phenol formaldehyde-free resin that provides an increased level of renewable content in line with a more sustainable approach to chemistry formulations. As part of the new products in the Eco-Rez™ line, the resin offers sharper print images and better rheological stability and water balance stability during long and high-speed press runs. Eco-Rez™ 9760 A is suitable for all offset inks including coldset, heatset and sheet-fed applications. 收起 | |
| Electrosilvering Resin 9001 | Guangzhou Baohui Resin Co., Ltd. | Electrosilvering Resin 9001 is a mirror silver resin appearing as a white solid. It features high viscosity, anti-corrosion, and strong pasting and plasticity. Electrosilvering Resin 9001 is compatible in other coating resins and is dispersible in organic...展开 Electrosilvering Resin 9001 is a mirror silver resin appearing as a white solid. It features high viscosity, anti-corrosion, and strong pasting and plasticity. Electrosilvering Resin 9001 is compatible in other coating resins and is dispersible in organic pigments. It finds application in paints and photo printing inks. 收起 | |
| Filtrez™ 521 A | Lawter | Filtrez™ 521 A is a fumaric modified rosin ester, soluble in alcohol with a high acid value and softening point. The product's broad compatibility and solubility allow it to be an important consideration in flexographic printing inks. | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...展开 Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. 收起 | |
| Flex-Rez™ 0080 CS | Lawter | Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substra...展开 Flex-Rez™ 0080 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation. It provides good adhesion on films like treated polyethylene and polypropylene, cellophane, aluminum and other foil-coated substrates. The resin is used in gravure and flexographic inks, in overprint varnishes as well as cold seal release lacquers. 收起 | |
| Flex-Rez™ 0100 CS | Lawter | Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and...展开 Flex-Rez™ 0100 CS is a co-solvent soluble polyamide resin that has good chemical resistance, flexibility and film formation and offers good adhesion on various films like polypropylene and polyethylene. It is compatible with phenolic and maleic resins and displays low viscosity for increased solids. Flex-Rez™ 0100 CS is suitable for use in flexographic and gravure inks, in overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 0120 CS | Lawter | Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible wi...展开 Flex-Rez™ 0120 CS is a co-solvent soluble polyamide resin that has good flexibility, film formation and chemical resistance as well as providing good adhesion on films like polypropylene, polyethylene, nylon and foil-coated substrates. It is compatible with phenolic and maleic resins and displays good formulating flexibility. Flex-Rez™ 0120 CS is suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1060 CS | Lawter | Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applicati...展开 Flex-Rez™ 1060 CS is a co-solvent soluble polyamide resin that displays good adhesion on various films, provides good film formation as well as showing flexibility and chemical resistance. It is compatible with phenolic and maleic resins and has applications in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1066 CS | Lawter | Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with pheno...展开 Flex-Rez™ 1066 CS is a co-solvent soluble polyamide resin that displays good film formation, flexibility and chemical resistance with adhesion on various films like polyethylene, nylon, polypropylene and foil-coated substrates. It is compatible with phenolic and maleic resins, rosins and rosin derivatives and is considered suitable for use in flexographic and gravure inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1074 CS | Lawter | Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coa...展开 Flex-Rez™ 1074 CS is a co-solvent soluble polyamide resin that shows good chemical resistance, flexibility and film formation. It also displays good adhesion on films like treated polyethylene, cellophane, nylon, glassine, polypropylene and other foil coated substrates. Flex-Rez™ 1074 CS shows compatibility with phenolic and maleic resins, rosin derivatives and rosins. It has good formulating flexibility and a low viscosity. The product is ideally suited for use in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1084 AS | Lawter | Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial ge...展开 Flex-Rez™ 1084 AS is an alcohol soluble polyamide resin with a high melt point that should be considered in applications requiring high heat resistance. The resin won't gel at low temperatures, but when added to polyamide inks, it will give off partial gel resistance. Flex-Rez™ 1084 AS provides film hardness making it suitable as a modifier for improving rub, scratch and grease resistance. The resin presents ideal opportunities for the creation of unique, high-performance inks, applicable in various synthetic polymer substrates. Flex-Rez™ 1084 AS is used in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 1094 CS | Lawter | Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyeth...展开 Flex-Rez™ 1094 CS is a co-solvent soluble polyamide resin that has good flexibility, chemical resistance and film formation, along with good gel, water, alkali, lard and grease resistance properties. It provides good adhesion on films like treated polyethylene, aluminum, nylon, polypropylene and other foil coated substrates. Flex-Rez™ 1094 CS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It is commonly used in flexographic and gravure inks, in cold seal release lacquers and in overprint varnishes. 收起 | |
| Flex-Rez™ 1104 LCS | Lawter | Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104...展开 Flex-Rez™ 1104 LCS is a co-solvent soluble polyamide resin that shows good flexibility, chemical resistance and film formation. It displays good adhesion on films like nylon, polyethylene, glassine, polypropylene and foil-coated substrates. Flex-Rez™ 1104 LCS is compatible with phenolic and maleic resins, rosin derivatives and rosins. It shows lower viscosity for increased solids and good formulating flexibility. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. 收起 | |
| Flex-Rez™ 1155 AS | Lawter | Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degre...展开 Flex-Rez™ 1155 AS is an alcohol soluble polyamide resin combining alcohol solubility with nitrocellulose compatibility to create flexographic inks that have good runability and gloss. It shows tolerance for ester solvents and its high solubility and degree of compatibility allows it to be ideal for pigment wetting applications. Flex-Rez™ 1155 AS has good gel resistance as well as water, alkali, lard, oil and grease resistance properties. Further, it displays high gloss, adhesion and film forming capabilities. Flex-Rez™ 1155 AS is suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 2433 AD | Lawter | Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal ...展开 Flex-Rez™ 2433 AD is an alcohol dilutable polyamide resin that has good wet pack resistance along with adhesion to substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion, high gloss, low odor and makes for ideal use in gravure and flexographic inks and in coatings and overprint varnishes. 收起 | |
| Flex-Rez™ 2445 AD | Lawter | Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistan...展开 Flex-Rez™ 2445 AD is an alcohol dilutable polyamide resin that has good wet-pack resistance together with suitable adhesion on substrates like polypropylene, polyethylene and coated foils. Among the benefits of the resin include good gel and heat resistance properties, high gloss and pigment wetting features and film forming capabilities. Flex-Rez™ 2445 AD is suitable for use in gravure and flexographic inks, coatings and overprint varnishes and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 3370 CS | Lawter | Flex-Rez™ 3370 CS is a co-solvent polyamide resin that helps to improve gel resistance and is considered suitable for use in flexo and gravure inks as well as in lacquers for polyolefin films. | |
| Flex-Rez™ 4399 AD | Lawter | Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor an...展开 Flex-Rez™ 4399 AD is an alcohol dilutable polyamide resin that shows good wet-pack resistance as well as good adhesion on substrates like polypropylene, polyethylene and coated foils. It also has good pigment dispersion properties, high gloss, low odor and film forming benefits. Flex-Rez™ 4399 AD is ideal for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4512 AS | Lawter | Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solub...展开 Flex-Rez™ 4512 AS is an alcohol soluble polyamide resin that combines good alcohol solubility with nitrocellulose compatibility to form flexographic inks with outstanding gloss and runability. It shows ideal tolerance for ester solvents and its high solubility and high degree of compatibility make it suitable for pigment wetting applications. Flex-Rez™ 4512 AS also has good gel, water and deep freeze resistance as well as high gloss and low viscosity characteristics. The resin is suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 4584 AD | Lawter | Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suit...展开 Flex-Rez™ 4584 AD is an alcohol dilutable polyamide resin that displays good wet-pack resistance, good adhesion on substrates and coated foils as well as expert pigment dispersion properties. It also shows high gloss and good gel resistance making it suitable for use in gravure and flexographic inks, in overprint varnishes and coatings and in cold seal release lacquers. 收起 | |
| Flex-Rez™ 5111 AD | Lawter | Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that con...展开 Flex-Rez™ 5111 AD is an alcohol dilutable polyamide resin with good wet-pack resistance, good adhesion on substrates and coated foils as well as good pigment dispersion characteristics. It also shows block and gel resistance as well as high gloss that contribute to making Flex-Rez™ 5111 AD suitable for use in gravure and flexographic inks and in overprint varnishes and coatings. 收起 | |
| Flex-Rez™ 6243AS | Lawter | Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like oth...展开 Flex-Rez™ 6243AS is an alcohol soluble polyamide resin with a high melt point in a resin that can be used in overprints and inks that need high heat resistance. It has high gloss, is soluble in alcohol and displays flexibility, color and adhesion like other commercial polyamide resins. Flex-Rez™ 6243AS dries to a hard film composition creating water resistant, acid, alkali and grease resistant properties as well as block, ice-crinkle and rub characteristics. It does not gel at low temperatures, but can boost gel resistance of standard polyamide inks. Flex-Rez™ 6243AS is ideal for use in gravure and flexographic inks, overprint varnishes and coatings. 收起 | |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...展开 Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...展开 Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. 收起 | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...展开 Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 收起 | |
| High-Bright PU C701 | Guangzhou Baohui Resin Co., Ltd. | High-Bright PU C701 is a wear-resistant polyurethane resin. It enhances the luster and richness in polyurethane, has wettability with pigments, and is compatible with hydroxyl acrylic acid. This product is commonly applied to high-grade polyurethane coati...展开 High-Bright PU C701 is a wear-resistant polyurethane resin. It enhances the luster and richness in polyurethane, has wettability with pigments, and is compatible with hydroxyl acrylic acid. This product is commonly applied to high-grade polyurethane coatings. 收起 | |
| Hydro-Rez™ 1100D | Lawter | Hydro-Rez™ 1100D is a sulfopolyester resin for water-based liquid inks that displays high gloss and good pigment wetting properties. It has an ideal lay of aluminum (metallization), has good resolubility, alcohol resistance and easy wash-up. Hydro-Rez™ 11...展开 Hydro-Rez™ 1100D is a sulfopolyester resin for water-based liquid inks that displays high gloss and good pigment wetting properties. It has an ideal lay of aluminum (metallization), has good resolubility, alcohol resistance and easy wash-up. Hydro-Rez™ 1100D is suitable for use in metallic inks, pigment dispersions and pre and post-metal primers. 收起 | |
| Hydro-Rez™ 1200D2 | Lawter | Hydro-Rez™ 1200D2 is a sulfopolyester resin for water-based liquid inks that displays adhesion to metal surfaces and has good alcohol and water resistance properties. It is suitable for use in metallic inks, pre and post-metal primers and pigment dispersi...展开 Hydro-Rez™ 1200D2 is a sulfopolyester resin for water-based liquid inks that displays adhesion to metal surfaces and has good alcohol and water resistance properties. It is suitable for use in metallic inks, pre and post-metal primers and pigment dispersions. 收起 | |
| Hydro-Rez™ 1400D | Lawter | Hydro-Rez™ 1400D is a sulfopolyester resin for water-based liquid inks with a low glass transition temperature (Tg), good lamination bond strength and adhesion to polyester films as well as an easy wash-up. It is used in film-forming co-resins and laminat...展开 Hydro-Rez™ 1400D is a sulfopolyester resin for water-based liquid inks with a low glass transition temperature (Tg), good lamination bond strength and adhesion to polyester films as well as an easy wash-up. It is used in film-forming co-resins and lamination applications. 收起 | |
| Hydro-Rez™ 2007E | Lawter | Hydro-Rez™ 2007E is a solid acrylic resin with a low molecular weight intended for high-gloss OPV's. It is considered ideal for use in flexo and gravure inks and OPV applications. | |
| Hydro-Rez™ 2710E | Lawter | Hydro-Rez™ 2710E is a solid acrylic resin for water-based liquid inks that has good strength and pigment wetting properties. It is considered ideal for use in flexo and gravure inks and OPV applications. | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...展开 Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. 收起 | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...展开 Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. 收起 | |
| Hydro-Rez™ 6200 A | Lawter | Hydro-Rez™ 6200 A is a fumaric modified rosin ester soluble in alcohol or able to be dispersed in water with morpholine or ammonia. Its high melting point enhances fast solvent release and good leveling as well as providing compatibility with manila resin...展开 Hydro-Rez™ 6200 A is a fumaric modified rosin ester soluble in alcohol or able to be dispersed in water with morpholine or ammonia. Its high melting point enhances fast solvent release and good leveling as well as providing compatibility with manila resins and shellac. The rosin ester promotes gloss and leveling in floor polishes and is ideal for use in water-based or solvent flexographic inks. Hydro-Rez™ 6200 A can also be used in carton and specialty inks and in spirit varnishes. 收起 | |
| Hydroxyl Acrylic Resin BH655 | Guangzhou Baohui Resin Co., Ltd. | Hydroxyl Acrylic Resin BH655 is a water-resistant polyurethane resin. It improves the arrangement of aluminum powder, compatibility to cellulose acetate-butyrate and alcohol resistance, and wearing and solvent resistance. This product is commonly used in...展开 Hydroxyl Acrylic Resin BH655 is a water-resistant polyurethane resin. It improves the arrangement of aluminum powder, compatibility to cellulose acetate-butyrate and alcohol resistance, and wearing and solvent resistance. This product is commonly used in coatings and aluminum powder paints. 收起 | |
| K-636 | Guangzhou Baohui Resin Co., Ltd. | K-636 is an aliphatic, tetra-functional polyurethane resin appearing as a clear liquid. This product provides adhesion, and is commonly used in UV vacuum plating primers. | |
| KF-666 | Guangzhou Baohui Resin Co., Ltd. | KF-666 is a polyurethane acrylate resin appearing as a clear liquid. It features high curing speed and hardness, and solvent resistance. KF-666 finds application in vacuum electroplating finishes and polished finishes with high adhesion requirements. | |
| Miradull™ 7060 A | Lawter | Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and...展开 Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and is considered ideal for use in overprints. 收起 | |
| Miradull™ 8689 QL | Lawter | Miradull™ 8689 QL is an overprint varnish comprised of blended oils and is considered a varnish with driers, wax and matting agents. It has very dull OPV and shows resistance to polishing. Miradull™ 8689 QL is used in overprint varnishes for sheet-fed app...展开 Miradull™ 8689 QL is an overprint varnish comprised of blended oils and is considered a varnish with driers, wax and matting agents. It has very dull OPV and shows resistance to polishing. Miradull™ 8689 QL is used in overprint varnishes for sheet-fed applications. 收起 | |
| Miradull™ E | Lawter | Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing pro...展开 Miradull™ E is an overprint varnish from rosin-based resins, matting agents, alkyd resins, driers, waxes and mineral distillates. It has high rub and "polish" resistance, with a high amount of matting. It is fast drying and setting with low yellowing properties. The product is used in offset inks, sheet-fed and heatset inks. 收起 | |
| Miraglaze™ 22 A | Lawter | Miraglaze™ 22 A is an overprint varnish that has been created to give a great combination of light color, alcohol resistance, high gloss, drying speed and good rub and slip properties. Miraglaze™ 22 A is suitable for use in commercial sheet-fed and foldin...展开 Miraglaze™ 22 A is an overprint varnish that has been created to give a great combination of light color, alcohol resistance, high gloss, drying speed and good rub and slip properties. Miraglaze™ 22 A is suitable for use in commercial sheet-fed and folding carton sheet-fed inks as well as overprint varnishes. 收起 | |
| Miraglaze™ 8909 E | Lawter | Miraglaze™ 8909 E is an overprint varnish with 70% non-volatile composition derived from DCO, gelling agents, tung oil, mineral distillates and rosin-based resins. It shows a high gloss with fast drying and setting properties. Miraglaze™ 8909 E also exhib...展开 Miraglaze™ 8909 E is an overprint varnish with 70% non-volatile composition derived from DCO, gelling agents, tung oil, mineral distillates and rosin-based resins. It shows a high gloss with fast drying and setting properties. Miraglaze™ 8909 E also exhibits low yellowing, good tack stability and leveling features and is considered ideal in offset inks, overprint varnishes and wet-on-dry and wet-on-wet applications. 收起 | |
| Pinerez® 1290 | Lawter | Pinerez® 1290 is a tackifier resin with a moderate softening point and broad compatibility which helps it function as a tackifier in hot melt adhesives and solvents. The product is part of a series of Pinerez® tackifier resins which are recommended to boo...展开 Pinerez® 1290 is a tackifier resin with a moderate softening point and broad compatibility which helps it function as a tackifier in hot melt adhesives and solvents. The product is part of a series of Pinerez® tackifier resins which are recommended to boost the adhesive performance not only of hot melt adhesives and solvent-based adhesives, but to aid in sealants and water-based flooring adhesives as well. 收起 | |
| Pinerez® 2010LV | Lawter | Pinerez® 2010LV is a liquid rosin ester with a highly stabilized rosin ester that has a low odor, is light in color and displays a low viscosity at ambient temperatures. It is used in water-based, hot melt and solvent-based adhesives. | |
| Pinerez® 2110 | Lawter | Pinerez® 2110 is a tackifier resin with a light color and moderate softening point which shows broad compatibility and helps to improve adhesion to difficult surfaces like PET. The product is part of a series of Pinerez® tackifier resins which are recomme...展开 Pinerez® 2110 is a tackifier resin with a light color and moderate softening point which shows broad compatibility and helps to improve adhesion to difficult surfaces like PET. The product is part of a series of Pinerez® tackifier resins which are recommended to boost the adhesive performance not only of hot melt adhesives and solvent-based adhesives, but to aid in sealants and water-based flooring adhesives as well. 收起 | |
| Pinerez® 2260 | Lawter | Pinerez® 2260 is a tackifier resin with a highly stabilized rosin ester that has a low odor and a medium to high softening point. It is used as a tackifier in hot melt and solvent-based adhesives. | |
| Pinerez® 2400M | Lawter | Pinerez® 2400M is a tackifier resin with a highly stabilized rosin ester that has a medium to high softening point with good color and viscosity stability. It is ideal in hot melt formulations for road markings. | |
| Pinerez® 2410 | Lawter | Pinerez® 2410 is a tackifier resin that is highly stabilized with a low odor and color and a medium to high softening point. It is used as a tackifier in hot melt and solvent-based adhesives. | |
| Pinerez® 2415 | Lawter | Pinerez® 2415 is a tackifier resin that is highly stabilized with a high softening point, while exhibiting low color and heat stability. It is used as a tackifier in hot melt and solvent-based adhesives. | |
| Pinerez® LE4014 | Lawter | Pinerez® LE4014 is a liquid rosin ester that helps to boost adhesion in water-based flooring adhesives, while also acting as a plasticizer resin together with harder resins. | |
| PT-388 | Guangzhou Baohui Resin Co., Ltd. | PT-388 is a saturated polyester resin appearing as a clear liquid. It provides improved feel and elasticity without the addition of elastic powder, and is chemical and wear resistant. PT-388 finds application in elastic and villi paints. | |
| PT-466 | Guangzhou Baohui Resin Co., Ltd. | PT-466 is an elastic polyester resin appearing as a clear liquid. It provides bruise, wearing, solvent, and solution resistance. This product is commonly used in elastic and villi paints. | |
| PT-488 | Guangzhou Baohui Resin Co., Ltd. | PT-488 is a saturated polyester resin with special branch modification. Appearing as a clear liquid, it provides wearing, bruise, solvent, and solution resistance. It provides improved feel without the addition of elastic powder, and contains a general is...展开 PT-488 is a saturated polyester resin with special branch modification. Appearing as a clear liquid, it provides wearing, bruise, solvent, and solution resistance. It provides improved feel without the addition of elastic powder, and contains a general isocyanate curing agent. PT-488 finds application in elastic and villi paints. 收起 | |
| PT-558 | Guangzhou Baohui Resin Co., Ltd. | PT-558 is an elastic modified polyester resin appearing as a clear liquid. It has weather resistant and anti-pasting properties, and finds application in elastic and villi paints and coatings. | |
| PT-614 | Guangzhou Baohui Resin Co., Ltd. | PT-614 is a tohexanedionic polyester polyol appearing as a clear liquid. This product has bruise and scratch resistance, and is commonly used in elastic and villi paints. | |
| Reactol™ 1111 E | Lawter | Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and aceta...展开 Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and acetates when combined with drying oils. Reactol™ 1111 E is used in weather-resistant finishes, in cold-mix and spar varnishes and in flexo and gravure inks and lacquers. 收起 | |
| Reactol™ 1717 H C | Lawter | Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds...展开 Reactol™ 1717 H C is a pale ketone and aldehyde resin with an alcohol solubility that displays broad solubility in most solvents including acetates, caster oils, ketones and plasticizers. It also has good compatibility with most resins like rubber, alkyds, melamines, chlorinated rubber and polyamide resins. The product is used in rotogravure and flexographic inks, laminating inks, primer coatings, cellulose lacquers and adhesives. 收起 | |
| Reactol™ 1717BC | Lawter | Reactol™ 1717BC is a polyketone resin for solvent-based liquid inks that shows broad compatibility with other resins and solvents. It has high gloss, good pigment wetting properties, improves adhesion, has low color and reduces gel point of polyamide inks...展开 Reactol™ 1717BC is a polyketone resin for solvent-based liquid inks that shows broad compatibility with other resins and solvents. It has high gloss, good pigment wetting properties, improves adhesion, has low color and reduces gel point of polyamide inks. Reactol™ 1717BC is used in flexo and gravure inks and lacquers, in ballpoint and jet inks as well as screen inks. 收起 | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...展开 Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. 收起 | |
| Resiprene 35 | PT. Industri Karet Nusantara | Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing...展开 Resiprene 35 is a cyclized natural rubber soluble in odorless solvent, particularly in aliphatic hydrocarbon and cheap blends of aromatic and aliphatic. This product is suitable for protective and maintenance coatings as well as marine paints for brushing, rollers and spray applications. It is used to supply resistance to aqueous alkalis, acids and salt solutions in addition to water and humidity. 收起 | |
| Resiprene 36 | PT. Industri Karet Nusantara | Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in ...展开 Resiprene 36 is a cyclized rubber resin derived from natural rubber that can be used with natural rubber and isocyanates to give excellent primer for polypropylene film in manufacture of pressure sensitive adhesive tapes. This product can also be used in protective coatings, printing inks, marine paints, and back mirror tapes. 收起 |
