| 1050 Coated Middle Chrome Yellow | Hebei Canri Chemical Co., Ltd. | 1050 Coated Middle Chrome Yellow is a yellow lead chromium pigment. it has an aqueous suspension pH value of 5-8 and strong light, acid, and alkali resistance. 1050 Coated Middle Chrome Yell has applications in paints, coatings, and hot melt coatings. | |
| 220 Pigment Scarlet Powder | Hebei Canri Chemical Co., Ltd. | ||
| 805 Dark Chrome Yellow | Hebei Canri Chemical Co., Ltd. | 805 Dark Chrome Yellow is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and a heat resistance of approximately 240 °C. 805 Dark Chrome Yellow has applications in inks and coatings. | |
| 8050 Dark Chrome Yellow | Hebei Canri Chemical Co., Ltd. | 8050 Dark Chrome Yellow is a yellow lead chromium pigment. It provides high light resistance, good acid and heat resistance, high tinting strength, and good dispersibility. It also has an aqueous suspension pH value of 5-8. 8050 Dark Chrome Yellow can be ...展开 8050 Dark Chrome Yellow is a yellow lead chromium pigment. It provides high light resistance, good acid and heat resistance, high tinting strength, and good dispersibility. It also has an aqueous suspension pH value of 5-8. 8050 Dark Chrome Yellow can be used in ink and coating applications. 收起 | |
| 905 Coated Orange Chrome Yellow | Hebei Canri Chemical Co., Ltd. | 905 Coated Orange Chrome Yellow is a yellow lead chromium pigment in the form of an orange powder. It has good heat, light, acid, and alkali resistance and has an aqueous suspension pH value of 5-8. 905 Coated Orange Chrome Yellow can be used in paint, co...展开 905 Coated Orange Chrome Yellow is a yellow lead chromium pigment in the form of an orange powder. It has good heat, light, acid, and alkali resistance and has an aqueous suspension pH value of 5-8. 905 Coated Orange Chrome Yellow can be used in paint, coating, and hot melt coating applications. 收起 | |
| Benzidine Yellow G | Hebei Canri Chemical Co., Ltd. | Benzidine Yellow G is a yellow pigment with a pH value of 6-8 and heat resistance of 180 °C. It can be used in paint, coating, and ink applications. | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起 | |
| CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings. | |
| CENOBEADS™ CZS (Zirconium Silicate Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings. | |
| CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起 | |
| CenoFlour | CENOTEC Co., Ltd. | CenoFlour is a zircon powder that is a primary source for ceramic and ceramic colors. It can also be used as an abrasive cleaner and for welding rod coatings. | |
| CenoSilicate (Premium) | CENOTEC Co., Ltd. | CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint. | |
| CenoSilicate (Ultra Premium) | CENOTEC Co., Ltd. | CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes. | |
| Chrome Yellow 105LH | Hebei Canri Chemical Co., Ltd. | ||
| DYHARD® 100 | AlzChem AG | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...展开 DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100S | AlzChem AG | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...展开 DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SF | AlzChem AG | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® 100SH | AlzChem AG | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...展开 DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. 收起 | |
| DYHARD® A5M30 | AlzChem AG | DYHARD® A5M30 is widely used as a highly active but also latent accelerator master batch of DYHARD® UR500 in thermosetting epoxy resin formulations. It is especially designed for dust free work environments and easy to mix in productions | |
| DYHARD® CAAB | AlzChem AG | DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between ...展开 DYHARD® CAAB is a curing agent for matt finish powder coatings based on epoxy or epoxy-polyester hybrid formulations. Usually it is used together with DYHARD® PIN to realize these matt finishes. For low gloss applications the optimal mixing ratio between DYHARD® PIN and DYHARD® CAAB is 45:55. This ideal mixture is also available in the ready to use premix DYHARD® PMC for an easy handling. 收起 | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...展开 DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. 收起 | |
| DYHARD® DF50EP | AlzChem AG | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| DYHARD® Fluid 111 | AlzChem AG | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| DYHARD® Fluid 151 | AlzChem AG | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid 212 | AlzChem AG | DYHARD® Fluid 212 is a liquid latent curing agent. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® Fluid AC11 | AlzChem AG | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| DYHARD® MCA30 | AlzChem AG | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| DYHARD® MI-C | AlzChem AG | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem AG | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...展开 DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. 收起 | |
| DYHARD® OTB | AlzChem AG | DYHARD® OTB represents a medium reactive curing agent for high gloss epoxy powder coatings. With it’s ideal distribution properties in epoxy resins high quality finishes at low curing temperatures are provided. | |
| DYHARD® PI | AlzChem AG | DYHARD® PI represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. It has a larger particle size than DYHARD® PI-FF, which is more suitable where lower reactiviy's are needed. | |
| DYHARD® PI-FF | AlzChem AG | DYHARD® PI-FF represents an imidazole based accelerator and/or hardener for thermosetting epoxy resin systems. DYHARD® PI-FF has a smaller particle size than DYHARD® PI and hence is more suitable where higher reactivity's are needed. | |
| DYHARD® PIN | AlzChem AG | DYHARD® PIN represents a curing agent which is used in low gloss epoxy and epoxy-polyester hybrid powder coatings. It’s ideal distribution properties in both resin systems provides high quality finishes with a very good color stability. | |
| DYHARD® PMC | AlzChem AG | DYHARD® PMC represents a matt curing agent for low gloss epoxy and epoxy-polyester hybrid powder coatings. With its ideal distribution properties in both resins systems, high quality finishes with a very good color stability are provided. | |
| DYHARD® RF1000 | AlzChem AG | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® RF2100 | AlzChem AG | DYHARD® RF2100 is a low viscos modified bisphenol A epoxy resin. It features a long pot life in the impregnation bath, a rapid cure at 120ºC, optical clearness, and high transparency. This makes it ideal for use in filament winding applications. | |
| DYHARD® UR200 | AlzChem AG | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem AG | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem AG | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR400 | AlzChem AG | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in...展开 DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR500 | AlzChem AG | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® UR700 | AlzChem AG | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...展开 DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. 收起 | |
| DYHARD® UR800 | AlzChem AG | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® URAcc13 | AlzChem AG | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| DYHARD® URAcc57 | AlzChem AG | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 ser...展开 DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. 收起 | |
| Fast Yellow 10G | Hebei Canri Chemical Co., Ltd. | Fast Yellow G is a yellow pigment with a pH value of 6-8 and heat resistance of 180 °C. It carries good dispersibility and favorable weather resistance. Fast Yellow 10G can be used in paint, coating, and ink applications. | |
| Fast Yellow G | Hebei Canri Chemical Co., Ltd. | Fast Yellow G is a yellow pigment with a pH value of 6-8 and heat resistance of 160 °C. It can be used in paint, coating, and ink applications. | |
| Floating Aluminium Paste 2501 | Hebei Canri Chemical Co., Ltd. | Floating Aluminium Paste 2501 is an anti-rust pigment. It has favorable floating properties and is suitable for high temperature resistant organic silicone coatings. Floating Aluminium Paste 2501 can also be used in roof coating, pipe coating, and ink app...展开 Floating Aluminium Paste 2501 is an anti-rust pigment. It has favorable floating properties and is suitable for high temperature resistant organic silicone coatings. Floating Aluminium Paste 2501 can also be used in roof coating, pipe coating, and ink applications. 收起 | |
| Green Lemon Yellow | Hebei Canri Chemical Co., Ltd. | ||
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| Iron Oxide Black 330 | Hebei Canri Chemical Co., Ltd. | ||
| Iron Oxide Black 722 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Black 722 is a black iron oxide pigment in the form of a powder. It provides a pure color and high tinting strength. Iron Oxide Black 722 has applications in paints, coatings, and building materials. | |
| Iron Oxide Black 732 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Black 732 is a black iron oxide pigment in the form of a powder. It provides a pure color and high tinting strength. Iron Oxide Black 732 has applications in paints, coatings, and building materials. | |
| Iron Oxide Blue 886 | Hebei Canri Chemical Co., Ltd. | ||
| Iron Oxide Brown 686 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Brown 686 is a brown iron oxide pigment. It has a wider color range and strong adaptability and has applications in paints, coatings, and building materials. | |
| Iron Oxide Green 5605 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Green 5605 is a green iron oxide pigment. It provides bright color and high tinting strength and has applications in paints, coatings, and building materials. | |
| Iron Oxide Green 835 | Hebei Canri Chemical Co., Ltd. | ||
| Iron Oxide Orange 960 | Hebei Canri Chemical Co., Ltd. | ||
| Iron Oxide Red 110 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Red 110 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 110 has applications in paints and coatings. | |
| Iron Oxide Red 130 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Red 130 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 130 has applications in paints and coatings. | |
| Iron Oxide Red 180 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Red 180 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 180 has applications in paints and coatings. | |
| Iron Oxide Red 190 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Red 190 is a red iron oxide pigment in the form of a powder. It has a spherical particle shape and a pH value of 3-7. Iron Oxide Red 190 has applications in paints and coatings. | |
| Iron Oxide Yellow 313 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Yellow 313 is a yellow iron oxide pigment in the form of a powder. It has an acicular particle shape and a pH value of 3-7. Iron Oxide Yellow 313 has applications in paints and coatings. | |
| Iron Oxide Yellow 920 | Hebei Canri Chemical Co., Ltd. | Iron Oxide Yellow 920 is a yellow iron oxide pigment in the form of a powder. It has an acicular particle shape and a pH value of 3-7. Iron Oxide Yellow 920 has applications in paints and coatings. | |
| Iron-Titanium Compound Powder 303 | Hebei Canri Chemical Co., Ltd. | Iron-Titanium Compound Powder 303 is an anti-rust pigment in the form of a light white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a phosphorous pentoxide content of less than ...展开 Iron-Titanium Compound Powder 303 is an anti-rust pigment in the form of a light white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a phosphorous pentoxide content of less than or equal to 12 percent. Iron-Titanium Compound Powder 303 can be used in any paint application requiring requiring anti-rust properties. 收起 | |
| Iron-Titanium Compound Powder 404 | Hebei Canri Chemical Co., Ltd. | Iron-Titanium Compound Powder 404 is an anti-rust pigment in the form of a white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a silicate content of less than or equal to 13 perc...展开 Iron-Titanium Compound Powder 404 is an anti-rust pigment in the form of a white powder. It is suitable for aqueous, oily, and various types of base minerals to produce anti-rust paint and primer. It has a silicate content of less than or equal to 13 percent. Iron-Titanium Compound Powder 404 can be used in any paint application requiring requiring anti-rust properties. 收起 | |
| Iron-Titanium Compound Powder 505 | Hebei Canri Chemical Co., Ltd. | Iron-Titanium Compound Powder 505 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace zinc powder, micaceous iron oxide, and other anti-rust pigments in paints. It has a silicate content of less than or equal to 18 percent. ...展开 Iron-Titanium Compound Powder 505 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace zinc powder, micaceous iron oxide, and other anti-rust pigments in paints. It has a silicate content of less than or equal to 18 percent. Iron-Titanium Compound Powder 505 can be used in any paint application requiring requiring anti-rust properties. 收起 | |
| Iron-Titanium Compound Powder 808 | Hebei Canri Chemical Co., Ltd. | Iron-Titanium Compound Powder 808 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace red lead anti-rust pigment to produce anti-rust paints and primers. It has a silicate and chromate content of less than or equal to 8 and ...展开 Iron-Titanium Compound Powder 808 is an anti-rust pigment in the form of a silver-gray powder. It is used to replace red lead anti-rust pigment to produce anti-rust paints and primers. It has a silicate and chromate content of less than or equal to 8 and 30 percent respectively. Iron-Titanium Compound Powder 808 can be used in any paint application requiring requiring anti-rust properties. 收起 | |
| Lemon Chrome Yellow 501 | Hebei Canri Chemical Co., Ltd. | Lemon Chrome Yellow 501 is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and can be used in inks and coatings. | |
| Middle Chrome Yellow 103N | Hebei Canri Chemical Co., Ltd. | Middle Chrome Yellow 103N is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and a heat resistance of approximately 240 °C. Middle Chrome Yellow 103N has applications in inks and coatings. | |
| Middle Chrome Yellow 295 | Hebei Canri Chemical Co., Ltd. | ||
| Molybdate Red 107 | Hebei Canri Chemical Co., Ltd. | Molybdate Red 107 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 4-8 can be used in ink and coating applications. | |
| Molybdate Red 207 | Hebei Canri Chemical Co., Ltd. | Molybdate Red 207 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 4-8 can be used in ink and coating applications. | |
| Molybdate Red 307 | Hebei Canri Chemical Co., Ltd. | Molybdate Red 307 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 4-8 can be used in ink and coating applications. | |
| Molybdate Red F210 | Hebei Canri Chemical Co., Ltd. | Molybdate Red F210 is an orange lead chromium pigment in the form of a red powder. It has a pH value of 5-8 can be used in ink and coating applications. | |
| Non-Floating Aluminium Paste 110 | Hebei Canri Chemical Co., Ltd. | Non-Floating Aluminium Paste 110 is an anti-rust pigment. It is used to protect metal surfaces from corrosion. Non-Floating Aluminium Paste 110 is used widely in marine paintings and mechanical and electrical product primers. | |
| Pale Chrome Yellow 605 | Hebei Canri Chemical Co., Ltd. | Pale Chrome Yellow 605 is a yellow lead chromium pigment in the form of a yellow powder. It has a pH value of 6-9 and a heat resistance of approximately 240 °C. Pale Chrome Yellow 605 has applications in inks and coatings. | |
| Pigment Black CR311 | Hebei Canri Chemical Co., Ltd. | Pigment Black CR311 is a black pigment with a pH value of 2-3. It provides high tinting strength, no impurity, high weather resistance, and good ultraviolet protection. Pigment Black CR311 can be used in paint, coating, and ink applications. | |
| Pigment Black XD611 | Hebei Canri Chemical Co., Ltd. | Pigment Black XD611 is a black pigment. It provides high tinting strength, no impurity, high weather resistance, and good ultraviolet protection and has a pH value of 2-3. Pigment Black XD611 can be used in paint, coating, ink, paper making, and leather a...展开 Pigment Black XD611 is a black pigment. It provides high tinting strength, no impurity, high weather resistance, and good ultraviolet protection and has a pH value of 2-3. Pigment Black XD611 can be used in paint, coating, ink, paper making, and leather applications. 收起 | |
| Pigment Blue CR-102 | Hebei Canri Chemical Co., Ltd. | Pigment Blue CR-102 is a blue pigment with a bright color, high tinting strength, and favorable light resistance. It has a pH value of 6-8 and a heat resistance of 150 °C. Pigment Blue CR-102 can be used in ink applications. | |
| Pigment Blue CR-103 | Hebei Canri Chemical Co., Ltd. | Pigment Blue CR-103 is a blue pigment with a bright color, high tinting strength, and favorable light resistance. It has a pH value of 6-8 and a heat resistance of 150 °C. Pigment Blue CR-103 can be used in ink applications. | |
| Pigment Blue XD-101 | Hebei Canri Chemical Co., Ltd. | Pigment Blue XD-101 is a blue pigment that provides bright color, high tinting strength, and favorable light resistance. It has a pH value of 6-8 and heat resistance of 150 °C. Pigment Blue XD-101 can be used in ink applications. | |
| Pigment Golden Red C | Hebei Canri Chemical Co., Ltd. | Pigment Golden Red C is a red pigment that has a pH value of 6-8 and heat resistance of 130 °C. It can be used in ink applications. | |
| Pigment Green G | Hebei Canri Chemical Co., Ltd. | Pigment Green G is a green pigment with a pH value of 6-8. It has a heat resistance of 200 °C and can be used in paint and coating applications. | |
| Pigment Green G-B | Hebei Canri Chemical Co., Ltd. | Pigment Green G-B is a dark green pigment that provides high tinting strength. It has a pH value of 6-8 and heat resistance of 200 °C. Pigment Green G-B can be used in paint, coating, ink, and printing paste applications. | |
| Pigment Scarlet Powder 3132 | Hebei Canri Chemical Co., Ltd. | Pigment Scarlet Powder 3132 is a red pigment that provides high tinting strength to desired products. It has a pH value of 6-8 and can be used in ink, coating, paint, and printing paste applications. | |
| Pigment Scarlet Powder 808 | Hebei Canri Chemical Co., Ltd. | Pigment Scarlet Powder 808 is a red pigment that provides high tinting strength to desired products. It can be used in ink, coating, paint, and printing paste applications. | |
| Pigment Yellow G | Hebei Canri Chemical Co., Ltd. | Pigment Yellow G is a yellow pigment that carries high dispersibility and covering power. It has a pH value of 6-8 and heat resistance of 200 °C. Pigment Yellow G can be used in paint, coating, and ink applications. | |
| POL-1125 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1180 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起 |
