| Acry-25 | Macro Polymers Pvt. Ltd. | Acry-25 is an acrylic-modified, soya fatty acid, pentaerythritol base alkyd resin. This product has high gloss and high build in air-drying industrial finishes. Acry-25 features excellent outdoor, water, oil and weather resistance. It can be used in pa...展开 Acry-25 is an acrylic-modified, soya fatty acid, pentaerythritol base alkyd resin. This product has high gloss and high build in air-drying industrial finishes. Acry-25 features excellent outdoor, water, oil and weather resistance. It can be used in pale-coloured varnishes for industrial uses. 收起 | |
| Acry-300 | Macro Polymers Pvt. Ltd. | Acry-300 is a modified acrylic alkyd resin. This product has very high gloss, and excellent weather, water and oil resistant properties. It can be used in pale coloured varnishes for industrial uses, in clear coat wood finishes, and in auto refinishing. | |
| Acry-302 | Macro Polymers Pvt. Ltd. | Acry-302 is a specialty alkyd resin. This product has very high gloss, and rapid drying properties. It provides weather resistance with good water and oil resistance characteristics. It can be used in pale-coloured industrial varnishes. | |
| Acry-35 | Macro Polymers Pvt. Ltd. | Acry-35 is an acrylic-modified alkyd resin. This product has very high gloss, and excellent weather, water and oil-resistant properties. It can be used in pale-coloured varnishes for industrial uses. | |
| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| C-1025 | Macro Polymers Pvt. Ltd. | C-1025 is a short oil, glycerol-esterified alkyd resin that has been modified with saturated fatty acids. This product shows high gloss, good hardness and flexibility in stoving enamels. If used in nitrocellulose lacquers, it has very good yellowing res...展开 C-1025 is a short oil, glycerol-esterified alkyd resin that has been modified with saturated fatty acids. This product shows high gloss, good hardness and flexibility in stoving enamels. If used in nitrocellulose lacquers, it has very good yellowing resistance, flexibility and durability. It can be used in white baking enamels and in wood coatings. 收起 | |
| C-1030 | Macro Polymers Pvt. Ltd. | C-1030 is a short oil glycerol esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, flexibility and yellowing resistance in stoving enamels. It can be used in stoving enamels for aut...展开 C-1030 is a short oil glycerol esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, flexibility and yellowing resistance in stoving enamels. It can be used in stoving enamels for automotive and kitchen appliance applications. It can also be used in clear and pigmented nitrocellulose lacquer for furniture and automotives. 收起 | |
| C-1031 | Macro Polymers Pvt. Ltd. | C-1031 is a short oil glycerol-esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, yellowing resistance, and flexibility in stoving enamels. It can be used in white baking enamels a...展开 C-1031 is a short oil glycerol-esterified alkyd resin that has been modified with a saturated fatty acid. This product provides high gloss, good hardness, yellowing resistance, and flexibility in stoving enamels. It can be used in white baking enamels and wood coatings. 收起 | |
| C-1032 | Macro Polymers Pvt. Ltd. | C-1032 is a non-drying alkyd resin based on trimethylol propane and isophthalic acid. This product has very high temperature resistance, up to 200 degrees Celsius. It can be used in high temperature industrial finishes and insulation. | |
| C-1032 | Macro Polymers Pvt. Ltd. | C-1032 is a short-oil glycerol-esterified resin, that has been modified with coconut oil. This product provides good hardness, high gloss, yellowing resistance and flexibility in stoving enamels. It can be used in stoving enamels for automotive and kitc...展开 C-1032 is a short-oil glycerol-esterified resin, that has been modified with coconut oil. This product provides good hardness, high gloss, yellowing resistance and flexibility in stoving enamels. It can be used in stoving enamels for automotive and kitchen appliance applications. 收起 | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CA-3045 | Macro Polymers Pvt. Ltd. | CA-3045 is a medium oil, penta-esterified alkyd resin that has been modified with castor oil. This product has good compatibility with nitrocellulose lacquers. It can be used in nitrocellulose polishing lacquers for furniture, nitrocellulose base puttie...展开 CA-3045 is a medium oil, penta-esterified alkyd resin that has been modified with castor oil. This product has good compatibility with nitrocellulose lacquers. It can be used in nitrocellulose polishing lacquers for furniture, nitrocellulose base putties, and leather polishes. 收起 | |
| CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起 | |
| CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings. | |
| CENOBEADS™ CZS (Zirconium Silicate Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings. | |
| CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起 | |
| CenoFlour | CENOTEC Co., Ltd. | CenoFlour is a zircon powder that is a primary source for ceramic and ceramic colors. It can also be used as an abrasive cleaner and for welding rod coatings. | |
| CenoSilicate (Premium) | CENOTEC Co., Ltd. | CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint. | |
| CenoSilicate (Ultra Premium) | CENOTEC Co., Ltd. | CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes. | |
| CR-250 | Macro Polymers Pvt. Ltd. | CR-250 is an unmodified liquid epoxy resin that is based on Bisphenol A and epichlorohydrine. This product is soluble in alcohols, esters, ketones, glycol ethers, and aromatic hydrocarbons. It can be used in castings, encapsulations, flooring, potting, ...展开 CR-250 is an unmodified liquid epoxy resin that is based on Bisphenol A and epichlorohydrine. This product is soluble in alcohols, esters, ketones, glycol ethers, and aromatic hydrocarbons. It can be used in castings, encapsulations, flooring, potting, adhesives, laminating, reinforced plastics, filament winding, coatings, and electrotechnical applications. 收起 | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| D-2040M | Macro Polymers Pvt. Ltd. | D-2040M is a short oil, glycerol-esterified alkyd resin that has been modified with monomeric dehydrated castor oil. This product has rapid curing and good yellowing resistance in stoving enamels. It also has excellent flexibility, with good impact resi...展开 D-2040M is a short oil, glycerol-esterified alkyd resin that has been modified with monomeric dehydrated castor oil. This product has rapid curing and good yellowing resistance in stoving enamels. It also has excellent flexibility, with good impact resistance and adhesion on steel. It can be used as a stoving primer. 收起 | |
| D-2040MHV | Macro Polymers Pvt. Ltd. | D-2040MHV is a short-oil, glycerol-esterified alkyd resin that has been modified with dehydrated castor oil. This product provides good yellowing resistance, high gloss and good durability with rapid curing in stoving enamels. It can be used in stoving ...展开 D-2040MHV is a short-oil, glycerol-esterified alkyd resin that has been modified with dehydrated castor oil. This product provides good yellowing resistance, high gloss and good durability with rapid curing in stoving enamels. It can be used in stoving enamels for automotive and bicycle applications. It can also be used in stoving primers and acid hardening varnishes. 收起 | |
| D-2050 | Macro Polymers Pvt. Ltd. | D-2050 is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with dehydrated castor oil. This product has good brushability and durability. It can be used in decorative pastel enamels for interior and exterior use. | |
| D-2050R | Macro Polymers Pvt. Ltd. | D-2050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with dehydrated castor oil and rosin. This product has good brushability, good durability, and high initial gloss. It can be used in decorative pastel enamels for int...展开 D-2050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with dehydrated castor oil and rosin. This product has good brushability, good durability, and high initial gloss. It can be used in decorative pastel enamels for interior and exterior use. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Epoxy-450 | Macro Polymers Pvt. Ltd. | Epoxy-450 is an epoxy resin in a 75% xylene solution. This product shows good hardness and adhesion to a variety of substrates. It can be used in two-pack cold-curing industrial, maintenance and marine coatings. If it is used with various polyamine har...展开 Epoxy-450 is an epoxy resin in a 75% xylene solution. This product shows good hardness and adhesion to a variety of substrates. It can be used in two-pack cold-curing industrial, maintenance and marine coatings. If it is used with various polyamine hardeners, it can impart good corrosion and chemical resistance. 收起 | |
| F-4035 | Macro Polymers Pvt. Ltd. | F-4035 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product has excellent yellowing resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows hig...展开 F-4035 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product has excellent yellowing resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high gloss and good gloss retention. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators and kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing. 收起 | |
| F-4035 55% HV | Macro Polymers Pvt. Ltd. | F-4035 55% HV is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high...展开 F-4035 55% HV is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures. When it is used in stoving enamels, it shows high gloss and high gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators, kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing applications. 收起 | |
| F-4038 | Macro Polymers Pvt. Ltd. | F-4038 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures, When used in stoving enamels, it has very high gloss and ...展开 F-4038 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to light and heat, even at high temperatures, When used in stoving enamels, it has very high gloss and good gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators, kitchen equipment, two component polyurethane lacquers, and and automotive paints in refinishing applications. 收起 | |
| F-4043 | Macro Polymers Pvt. Ltd. | F-4043 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to yellowing in light and heat, even at high temperatures. If used in stoving enamels, it shows very h...展开 F-4043 is a short oil, pentaerythritol-esterified alkyd resin that has been modified with soybean fatty acids. This product shows excellent resistance to yellowing in light and heat, even at high temperatures. If used in stoving enamels, it shows very high gloss and good gloss retention, excellent hardness and flexibility. It can be used in white and light-coloured high-quality stoving enamels for automotives, washing machines, refrigerators and kitchen equipment, two-component polyurethane lacquers, and automotive paints for refinishing applications. 收起 | |
| H-101 | Macro Polymers Pvt. Ltd. | H-101 is an aliphatic polyamide resin. This product should be used in an aliphatic epoxy adduct as a hardener, in order to induce chemical-resistant protection for coatings with or without coal tar modification. It can be used in coatings. | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| KF-10 | Macro Polymers Pvt. Ltd. | KF-10 is a ketone formaldehyde resin. This product has compatibility with drying and non-drying short oil alkyds that have been dissolved in aromatic solvents. It shows high gloss and excellent build in air-drying nitrocellulose industrial finishes. If...展开 KF-10 is a ketone formaldehyde resin. This product has compatibility with drying and non-drying short oil alkyds that have been dissolved in aromatic solvents. It shows high gloss and excellent build in air-drying nitrocellulose industrial finishes. If it is used with non-reactive polyamides, it gives good gloss in flexo inks. KF-10 can be used in nitrocellulose paints, adhesives, printing inks, ballpoint pen ink pastes, wood varnishes, metal and paper. 收起 | |
| L-602054 | Macro Polymers Pvt. Ltd. | L-602054 is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and phenols. This product has good brushability, good drying, durability and very good gloss. It can be used in decorative, fast-drying enamels for ...展开 L-602054 is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and phenols. This product has good brushability, good drying, durability and very good gloss. It can be used in decorative, fast-drying enamels for interior and exterior uses. It can also be used in primers for automotive undercoats. 收起 | |
| L-6050 | Macro Polymers Pvt. Ltd. | L-6050 is a medium oil, pentaerythritol-esterified alkyd resin modified with linseed oil. This product has high viscosity and good hardness after short drying times, and a limited compatibility with basic pigments. It can be used in low-end paints, spra...展开 L-6050 is a medium oil, pentaerythritol-esterified alkyd resin modified with linseed oil. This product has high viscosity and good hardness after short drying times, and a limited compatibility with basic pigments. It can be used in low-end paints, spraying enamels for trucks and buses, and stoving enamels for steel furniture. 收起 | |
| L-6050R | Macro Polymers Pvt. Ltd. | L-6050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and rosin. This product has good brushability and durability with good initial gloss. It can be used in decorative pastel enamels for interior and ex...展开 L-6050R is a medium oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil and rosin. This product has good brushability and durability with good initial gloss. It can be used in decorative pastel enamels for interior and exterior use. 收起 | |
| L-6060 | Macro Polymers Pvt. Ltd. | L-6060 is a long oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product has very good drying rates and a thorough hardness, with excellent durability, surface hardness and gloss retention. It can be used in dec...展开 L-6060 is a long oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product has very good drying rates and a thorough hardness, with excellent durability, surface hardness and gloss retention. It can be used in decorative paints in deep colour shades, undercoats, and primers. 收起 | |
| L-6060 100% | Macro Polymers Pvt. Ltd. | L-6060 100% is a long-oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product shows very good drying and thorough hardening, with excellent durability in all climates, surface hardness, gloss and gloss retention....展开 L-6060 100% is a long-oil, pentaerythritol-esterified alkyd resin that has been modified with linseed oil. This product shows very good drying and thorough hardening, with excellent durability in all climates, surface hardness, gloss and gloss retention. It can be used in decorative enamels, undercoats and primers. 收起 | |
| MF-268 | Macro Polymers Pvt. Ltd. | MF-268 is a butylated melamine formaldehyde resin. This product has excellent reactivity and color retention. It can be used in stoving finishes for automotive and kitchen appliances, and strip and roller coating enamels. | |
| MF-910 | Macro Polymers Pvt. Ltd. | MF-910 is a butylated melamine formaldehyde resin. This product has medium reactivity and good color retention on stoving. It can be used in stoving finishes for automotive and kitchen appliance applications, and in strip and roller coating enamels. | |
| MF-970 | Macro Polymers Pvt. Ltd. | MF-970 is a butylated melamine formaldehyde resin. This product has good flexibility and colour retention. It can be used in stoving finishes for automotive and kitchen appliances. | |
| MFAP | Macro Polymers Pvt. Ltd. | MFAP is a specialty alkyd resin. This product has compatibilty with drying oils and long oil alkyds, with very low acid values. It can be used as a medium for single-pack aluminum paints. This paste will not turn black for three months. | |
| MFHF | Macro Polymers Pvt. Ltd. | MFHF is a specialty alkyd resin. This product is compatible with drying oils and long-oil alkyds. It can be used as a medium for hammertone finishes and coatings. | |
| MODIPER® A1100 | NOF Corporation | MODIPER® A1100 is a polyethylene-based polystyrene modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment an...展开 MODIPER® A1100 is a polyethylene-based polystyrene modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A1401 | NOF Corporation | MODIPER® A1401 is a polyethylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic...展开 MODIPER® A1401 is a polyethylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A3400 | NOF Corporation | MODIPER® A3400 is a polypropylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorgani...展开 MODIPER® A3400 is a polypropylene-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for use as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4100 | NOF Corporation | MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pi...展开 MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4300 | NOF Corporation | MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a di...展开 MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4400 | NOF Corporation | MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5300 | NOF Corporation | MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of...展开 MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5400 | NOF Corporation | MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L130D | NOF Corporation | MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fille...展开 MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L430-G | NOF Corporation | MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility...展开 MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® F606 | NOF Corporation | MODIPER® F606 is a fluorinated copolymer formulated as a water and oil repellent. It works in acrylic coating materials and resins and is used in various types of paints, pigments, adhesives, and films. | |
| MODIPER® FS700 | NOF Corporation | MODIPER® FS700 is a silicone copolymer formulated for adhesion control with low migration of silicon-related substances to the adhesive surface. This product is used in various types of paints, pigments, adhesives, and films. | |
| MR-Gly | Macro Polymers Pvt. Ltd. | MR-Gly is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyd that have been dissolved in aromatic solvents. It has very high gloss and is a rapid-drying resin. MR-Gly can be used in...展开 MR-Gly is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyd that have been dissolved in aromatic solvents. It has very high gloss and is a rapid-drying resin. MR-Gly can be used in pale-coloured industrial varnishes and in nitrocellulose base formulations. 收起 | |
| MR-Penta | Macro Polymers Pvt. Ltd. | MR-Penta is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyds that have been dissolved in aromatic solvents. It shows very high loss and is a rapid-drying resin. MR-Penta can be u...展开 MR-Penta is a rosin-modified maleic glycerin ester resin. This product is compatible with nitrocellulose, drying and non-drying alkyds that have been dissolved in aromatic solvents. It shows very high loss and is a rapid-drying resin. MR-Penta can be used in pale-coloured industrial varnishes and in nitrocellulose base formulations. 收起 | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC，非离子型水溶性聚合物，是一种白色，自由流动的粒状粉末。它不溶于有机溶剂，但它很容易分散在冷水和热水中，得到不同粘度的溶液。此产品被用作增稠剂，保护胶体，基料，稳定剂和助悬剂，特别是应用于的需要非离子型材料的场合。 | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ hydroxyethylcellulose (HEC) 在过去的50年中始终是行业内领先的水基建筑涂料增稠剂。而现在Natrosol Performax HEC允许涂料生产商在涂料生产的任意时间点添加干燥形式的HEC而不会产生结块，这一特性将涂料制造过程中的灵活性和产品质量带到了一个史无前例的水平。 | |
| Natrosol™ Plus | Ashland | Natrosol™ Plus is a associative cellulosic polymer designed specifically for use in latex paints. | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...展开 Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. 收起 | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...展开 Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. 收起 | |
| NONPOL® PMA-50W | NOF Corporation | NONPOL® PMA-50W is a water-based solvent containing polymaleic acid. This product is used with water treatment chemicals, anti-corrosion agents, and other applications. | |
| P-10 | Macro Polymers Pvt. Ltd. | P-10 is an unsaturated polyester resin. This product gives a hard, glass-like film when cured. It is used as a lamination for wood coatings in three-pack systems, and has very good exterior and stain resistance. |
