| BLUESIL ADD 10086 | Elkem Silicones | BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL BP 9200 | Elkem Silicones | BLUESIL BP 9200 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9300 | Elkem Silicones | BLUESIL BP 9300 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起 | |
| BLUESIL BP 9800 | Elkem Silicones | BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9821 | Elkem Silicones | BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9878 | Elkem Silicones | BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour. | |
| BLUESIL BP 9900 | Elkem Silicones | BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials. | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL EMUL 1803 | Elkem Silicones | BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers. | |
| BLUESIL EMUL 269 | Elkem Silicones | BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane. | |
| BLUESIL EMUL 284 | Elkem Silicones | BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起 | |
| BLUESIL EMUL 3500 | Elkem Silicones | BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane. | |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起 | |
| BLUESIL EMUL 55 | Elkem Silicones | BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起 | |
| BLUESIL EMUL 872 | Elkem Silicones | BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P. | |
| BLUESIL EMUL E1P | Elkem Silicones | BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries. | |
| BLUESIL EMUL E1P U1 | Elkem Silicones | BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL EMULSION 2400 | Elkem Silicones | BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane. | |
| BLUESIL FLD 21625 | Elkem Silicones | BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid. | |
| BLUESIL FLD 45 | Elkem Silicones | BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints. | |
| BLUESIL FLD 47V1 000 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V100 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V350 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V50 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V500 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6482X | Elkem Silicones | BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起 | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3309 | Elkem Silicones | BLUESIL SP 3309 is a polyether modified trisiloxane. | |
| BLUESIL TCS 7001 | Elkem Silicones | BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating. | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起 | |
| CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings. | |
| CENOBEADS™ CZS (Zirconium Silicate Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings. | |
| CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起 | |
| CenoFlour | CENOTEC Co., Ltd. | CenoFlour is a zircon powder that is a primary source for ceramic and ceramic colors. It can also be used as an abrasive cleaner and for welding rod coatings. | |
| CenoSilicate (Premium) | CENOTEC Co., Ltd. | CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint. | |
| CenoSilicate (Ultra Premium) | CENOTEC Co., Ltd. | CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes. | |
| HA-V204 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance...展开 HA-V204 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. HA-V204 provides strong physical properties such as a high temperature resistance, high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V209 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temeratu...展开 HA-V209 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product can be used in combination with YAC-068 to achieve a higher temerature resistance. HA-V209 provides strong physical properties such as a high adhesion strength, high fogging and it protects against other environmental hazards. 收起 | |
| HA-V220 | Qingdao Xinyutian Chemical Co., Ltd. | HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperat...展开 HA-V220 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding for broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product features a good fogging property, initial adhesiveness, high temperature tolerance, high adhesion strength and protects against other environmental hazards. 收起 | |
| HAV-216 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with goo...展开 HAV-216 is a one-component waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HAV-228 | Qingdao Xinyutian Chemical Co., Ltd. | HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, hig...展开 HAV-228 is a waterborne polyurethane adhesive that is used for vacuum forming and bonding on a broad range of applications including MDF/PVC, MDF/POF, WOOD/PVC and WOOD/POF. This product provides excellent initial adhesiveness along with good fogging, high adhesion strength, high temperature resistance and protects against other environmental hazards. 收起 | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| HIKOREZ A-1100S | Kolon | HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives. | |
| HIKOREZ A-1115 | Kolon | HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ A-2115 | Kolon | HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ C-1100 | Kolon | HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...展开 HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. 收起 | |
| HIKOREZ H-2100 | Kolon | HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2130 | Kolon | HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展开 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展开 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ R-1095 | Kolon | HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking. | |
| HIKOREZ R-1100S | Kolon | HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking. | |
| HIKOREZ T-1080 | Kolon | HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展开 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起 | |
| HIKOREZ T-3100 | Kolon | HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives. | |
| HIKOTACK DP-100 | Kolon | HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives. | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展开 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120H | Kolon | HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives. | |
| HIKOTACK P-120HS | Kolon | HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展开 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120P | Kolon | HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives. | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| HIKOTACK P-140 | Kolon | HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起 | |
| HIKOTACK P-150 | Kolon | HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起 | |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90I | Kolon | HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展开 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起 | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK(CIR) C-120 | Kolon | HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink. | |
| HIKOTACK(CIR) C-90 | Kolon | HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry. | |
| LYNDCOAT 15 RTU | Elkem Silicones | LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RT...展开 LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RTU also helps keep molds and vents clean, reducing defects and downtime. Lyndcoat™ 15 RTU typically is durable through multiple production cycles. The need for reapplication is dependent on factors such as the rubber compound, curing time, curing temperature, tread design and application technique. Lyndcoat™ 15 RTU is designed for processes requiring low viscosity mold lubricants. 收起 | |
| LYNDCOAT BR 1100 RTU | Elkem Silicones | LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the c...展开 LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1100 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1100 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as Lyndcoat™ BR2101 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1102 | Elkem Silicones | LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the c...展开 LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1102 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1102 RTU is of medium viscosity and does not contain mica. 收起 | |
| LYNDCOAT BR 1103 RTU | Elkem Silicones | LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the c...展开 LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR1103 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. LYNDCOAT® BR1103 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as LYNDCOAT® BR2201 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1110 RTU | Elkem Silicones | LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers ...展开 LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. LYNDCOAT BR 1110 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. LYNDCOAT BR 1110 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as LYNDCOAT BR 2101 RTU, is highly recommended. 收起 | |
| LYNDCOAT BR 1211 | Elkem Silicones | LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtim...展开 LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtimes. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1214 | Elkem Silicones | LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green...展开 LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1623 RTU | Elkem Silicones | LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coatin...展开 LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer, is highly recommended. 收起 | |
| LYNDCOAT BR 1812 | Elkem Silicones | LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replace...展开 LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR 1812 RTU does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR 1812 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 2100 RTU | Elkem Silicones | LYNDCOAT BR 2100 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures durable performance. | |
| LYNDCOAT BR 2104 | Elkem Silicones | LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to...展开 LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 |
