| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...展开 Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. 收起 | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...展开 Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. 收起 | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...展开 Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. 收起 | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起 | |
| CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings. | |
| CENOBEADS™ CZS (Zirconium Silicate Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings. | |
| CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起 | |
| CenoSilicate (Premium) | CENOTEC Co., Ltd. | CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint. | |
| CenoSilicate (Ultra Premium) | CENOTEC Co., Ltd. | CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes. | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...展开 IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. 收起 | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...展开 IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. 收起 | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| MODIPER® A4100 | NOF Corporation | MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pi...展开 MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4300 | NOF Corporation | MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a di...展开 MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4400 | NOF Corporation | MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5300 | NOF Corporation | MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of...展开 MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5400 | NOF Corporation | MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L130D | NOF Corporation | MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fille...展开 MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L430-G | NOF Corporation | MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility...展开 MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...展开 Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. 收起 | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| POL-1125 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-1125 is a polyol compound from the DEG Series and it has a Molecular Weight of 900 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1180 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and te...展开 POL-1180 is a polyol compound from the DEG Series and it has a Molecular Weight of 600 which can be adjusted if required. This product can be used in adhesives, shoe soles, artificial leather resins and elastomers to increase resistance to abrasion and tearing. It takes a liquid form at room temperature but will solidify at lower temperatures. 收起 | |
| POL-123 | Qingdao Xinyutian Chemical Co., Ltd. | POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. Th...展开 POL-123 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 3500 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-1232 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1232 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 3500 and a Hydroxyl Value of 31-33 mgKOH/g. 收起 | |
| POL-1234 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-1234 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1500 and a Hydroxyl Value of 72-78 mgKOH/g. 收起 | |
| POL-1238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1238 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Viscosity of 1800 cps @ 60°C and a Molecular Weight of 3000. 收起 | |
| POL-1262 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1262 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1800 and a Viscosity of 900 cps @ 60°C. 收起 | |
| POL-1266 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1266 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1700 and a Viscosity of 1150 cps @ 60°C. 收起 | |
| POL-1276 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-1276 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This particular grade has a Molecular Weight of 1500 and a Viscosity of 750 cps @ 60°C. 收起 | |
| POL-138 | Qingdao Xinyutian Chemical Co., Ltd. | POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearin...展开 POL-138 is a polyol compound from the DEG Series that is in liquid form at room temperatures and solidifies at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. It has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000 which can be adjusted to meet the needs of the customer. 收起 | |
| POL-156 | Qingdao Xinyutian Chemical Co., Ltd. | POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives...展开 POL-156 is a polyol compound from the DEG Series and it has a Molecular Weight of 2000 which can be adjusted if required. It takes a liquid form at room temperature but will solidify at lower temperatures. This product can be used in shoe soles, adhesives, artificial leather resins and elastomers to increase resistance to tearing and abrasion, while also increasing folding endurance. 收起 | |
| POL-1756 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-1756 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-1856 | Qingdao Xinyutian Chemical Co., Ltd. | POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-1856 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 50-60 mgKOH/g. 收起 | |
| POL-2016 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increas...展开 POL-2016 is a polyol that is part of the EG, DEG Series and it is widely used in adhesives, elastomers, artificial leather resins and shoe soles. This product has a low density and helps improve the resistance to abrasion and tearing. It will also increase folding endurance while maintaining a high mechanical strength. This compound has a Hydroxyl Value of 51-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-2112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the custome...展开 POL-2112 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1000 but can be adjusted based on the requirements of the customer. It is mainly utilized in adhesives, elastomers, artificial leather resins and shoe soles. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-23112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abra...展开 POL-23112 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and Thermoplastic Polyurethanes (TPU). It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade hasa a Molecular Weight of 1000 and a Viscosity of 500cps @ 60°C. 收起 | |
| POL-2322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2322 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Viscosity of 3000 cps @ 60°C and a Molecular Weight of 5000. 收起 | |
| POL-2325 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides ot...展开 POL-2325 is a polyol from the High Functionality Series that is specially designed to be used in coatings, adhesives and elastomers. This series of products has a functionality of 2.2-2.6 which can be adjusted to the customers requirements. It provides other good physical qualities with a Molecular Weight of 1900 and an Acid Value that is 0.2-0.6 mgKOH/g. 收起 | |
| POL-2328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2328 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 4000 and a Hydroxyl Value of 25-31 mgKOH/g. 收起 | |
| POL-2338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2338 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 3000 and a Hydroxyl Value of 35-41 mgKOH/g. 收起 | |
| POL-2345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2345 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating adhesives, coatings and elastomers. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This particular grade has a Molecular Weight of 2500 and a Hydroxyl Value of 42-48 mgKOH/g. 收起 | |
| POL-2356 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2356 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000 which can be adjusted as needed. 收起 | |
| POL-2365 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2365 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a Hydroxyl Value of 63-67 mgKOH/g and a Molecular Weight of 1700 which can be adjusted as needed. 收起 | |
| POL-2375 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysi...展开 POL-2375 is a polyol compound that is part of the EG, BG Compound Series. This product can be used in creating elastomers, adhesives and coatings. It will provide the finished product with the ability to protect itself against abrasion, tearing, hydrolysis, and a good folding-endurance. This grade has a a Molecular Weight of 1500 and a Viscosity of 1000cps @ 60°C. 收起 | |
| POL-238 | Qingdao Xinyutian Chemical Co., Ltd. | POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase...展开 POL-238 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in artificial leather resins, shoe soles, adhesives and elastomers. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 3000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-2428 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2428 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 26-30 mgKOH/g and a Molecular Weight of 4000. 收起 | |
| POL-2456 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2456 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 2000 and a Viscosity of 1500 cps @ 60°C. 收起 | |
| POL-2466 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2466 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1700 and a Viscosity of 2000 cps @ 60°C. 收起 | |
| POL-2476 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2476 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Molecular Weight of 1500 and a Hydroxyl Value of 71-79 mgKOH/g. 收起 | |
| POL-2500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products pro...展开 POL-2500 is a polyol compound that is part of the EG, PG Compound Series and is mainly utilized in coatings and pouring elastomers. This product stays in liquid form at room temperature and solidifies at colder temperatures. It helps finished products provide a good resistance to tearing, abrasion, and also increases folding endurance. This compound has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-256 | Qingdao Xinyutian Chemical Co., Ltd. | POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase...展开 POL-256 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. The Molecular Weight of this product is 2000 but can be adjusted based on the requirements of the customer. 收起 | |
| POL-25722 | Qingdao Xinyutian Chemical Co., Ltd. | POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. ...展开 POL-25722 is a polyol from the Other Compound Series that is widely used in artificial leather resins, shoe soles, adhesives, elastomers and coatings. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 5000 but that can be adjusted to meet the needs of the customer. These compounds help products become abrasion resistant, maintain good folding endurance and tearing resistance. 收起 | |
| POL-265 | Qingdao Xinyutian Chemical Co., Ltd. | POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer...展开 POL-265 is a polyol compound that is part of the EG Series and stay mainly in liquid form at room temperature and solidifies at colder temperatures. The Molecular Weight of this product is 1700 but can be adjusted based on the requirements of the customer. It is mainly utilized in elastomers, adhesives, shoe soles and artificial leather resins. It will increase resistance to abrasion and tearing, while also increasing folding endurance and mechanical strength. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical propert...展开 POL-311 is a polyol that is part of the Ultrahigh Molecular Weight Series and it is specially developed for adhesives. This product can be used for laminating packaging directly and it has Molecular Weight of 10000. It provides other good physical properties with a Hydroxyl Value of 10-12 mgKOH/g and an Acidic Value the is <1.5 mgKOH/g. 收起 | |
| POL-311 | Qingdao Xinyutian Chemical Co., Ltd. | POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-311 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 10000 and a Hydroxyl Value of 10-12 mgKOH/g. 收起 | |
| POL-3112 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing f...展开 POL-3112 is a polyol compound that is part of the BG Series and it is primarily used in thermoplastic polyurethanes, waterborne polyurethanes, adheasives and coating. It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 1000 and a Viscosity of 380 cps @ 60°C. 收起 | |
| POL-3195 | Qingdao Xinyutian Chemical Co., Ltd. | POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increa...展开 POL-3195 is a polyol compound that is part of the BG Series and it is primarily used in adhesives, coatings, waterborne polyurethanes and thermoplastic polyurethanes (TPU). It functions to increase the resistance to tearing and abrasion, while also increasing folding endurance and density. This product has a Molecular Weight of 600 and a Viscosity of 250 cps @ 60°C. 收起 | |
| POL-322 | Qingdao Xinyutian Chemical Co., Ltd. | POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and teari...展开 POL-322 is a polyol compound that is part of the BG Series and it is mainly utilized in coatings, adhesives, artificial leather resins, waterborne polyurethanes and thermoplastic polyurethanes. It functions to increase the resistance to abrasion and tearing, while also increasing mechanical properties and density. This product has a Molecular Weight of 5000 and a Hydroxyl Value of 20-24 mgKOH/g. 收起 | |
| POL-328 | Qingdao Xinyutian Chemical Co., Ltd. | POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-328 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Molecular Weight of 4000 and a Hydroxyl Value of 26-30 mgKOH/g. 收起 | |
| POL-338 | Qingdao Xinyutian Chemical Co., Ltd. | POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearin...展开 POL-338 is a polyol compound that is part of the BG Series and it is primarily used in waterborne polyurethanes, thermoplastic polyurethanes, adhesives, coatings and artificial leather resins. It functions to increase the resistance to abrasion and tearing, while also increasing density and folding endurance. This product has a Hydroxyl Value of 35-41 mgKOH/g and a Viscosity of 2400 cps @ 60°C. 收起 |
