| BLUESIL ADD 10086 | Elkem Silicones | BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints ...展开 BLUESIL ADD 10086 is a polydimethylsiloxane gum in solvent solution especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is also suitable for use with classical, polyurethane bases, thixotropic alkyd paints and silicone binders. 收起 | |
| BLUESIL ADD 11013 | Elkem Silicones | BLUESIL ADD 11013 is a polyether-modified polydimethylsiloxane for use in solventless paints and varnishes, and in water-based paints and inks. | |
| BLUESIL BP 9200 | Elkem Silicones | BLUESIL BP 9200 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9300 | Elkem Silicones | BLUESIL BP 9300 is a solventless alkylpolysiloxane oligomer designed to enhance durability of construction materials as formed hard adhesion repellency layer through deep penetration. | |
| BLUESIL BP 9705 | Elkem Silicones | BLUESIL BP 9705 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL BP 9710 | Elkem Silicones | BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and...展开 BLUESIL BP 9710 is an emulsion with an alkylpolysiloxane oligomer base designed to protect surfaces against moisture. This waterproofing system respects the environment since it is entirely formulated in a water base, it is free of any organic solvent and it does not contain ecotoxic surfactant. After it has dried on the surface, BLUESIL BP 9710 repels water and allows walls to breathe. Experience acquired over more than 40 years shows that silicone water repellents are a good answer to humidity problems in construction materials, particularly when for esthetical reasons the natural aspect of the material should be preserved. BLUESIL BP 9710 has been awarded a test certificate by CSTC (Centre Scientifique et Technique de - ): ref HD-340/133-151 on the 2006.02.20. 收起 | |
| BLUESIL BP 9800 | Elkem Silicones | BLUESIL BP 9800 is an aqueous APE-free polymethylsiloxane resin emulsion. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9821 | Elkem Silicones | BLUESIL BP 9821 is an aqueous APE-free polymethylsiloxane resin emulsion with low VOC content. This emulsion is designed for use in facade coatings, to optimise the balance between water repellency and water vapour permeability. | |
| BLUESIL BP 9878 | Elkem Silicones | BLUESIL BP 9878 is an aqueous polymethylsiloxane resin emulsion.This emulsion provides two fundamental properties of the silicone technology to the paint film: water repellency and permeability to water vapour. | |
| BLUESIL BP 9900 | Elkem Silicones | BLUESIL BP 9900 is a non ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive for building materials. | |
| BLUESIL BP 9920 | Elkem Silicones | BLUESIL BP 9920is anon-ionic, APEO free, polyorganosiloxane aqueous emulsion, to be used as a water repellent additive in various formulations for building materials. | |
| BLUESIL EMUL 1803 | Elkem Silicones | BLUESIL EMUL 1803 is a non-ionic silicone emulsion containing silicone oil and resin. This emulsion is intended for mould-release of cast polyurethane elastomers. | |
| BLUESIL EMUL 269 | Elkem Silicones | BLUESIL EMUL 269 is an aqueous emulsion of an hydrogeno polysiloxane. | |
| BLUESIL EMUL 284 | Elkem Silicones | BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening prop...展开 BLUESIL EMUL 284 is a slightly ionic oil-in-water type emulsion of a high viscosity a/w-hydroxydimethylpolysiloxane fluid. BLUESIL EMUL 284 is characterised by its reactivity, its outstanding stability, its lubricating power and its fabric softening properties (textile applications). 收起 | |
| BLUESIL EMUL 3500 | Elkem Silicones | BLUESIL EMUL 3500 is a general purpose; non-ionic oil in water silicone emulsion, of a high viscosity hydroxyl terminated polysiloxane. | |
| BLUESIL EMUL 35B | Elkem Silicones | BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream...展开 BLUESIL EMUL 35B is an oil-in-water emulsion containing 35 % silicone oil, which is diluted for use, generally in a proportion of one part of BLUESIL EMUL 35B to 20 to 200 parts of water. Its characteristics are as follows:Practically no tendency to cream, neither during storage nor in use.Perfect stability in contact with hard water or zinc (i.e. in galvanized metal containers).Excellent heat stability after dilution.Very good wetting power. 收起 | |
| BLUESIL EMUL 55 | Elkem Silicones | BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component...展开 BLUESIL EMUL 55 is a non-ionic, silicone oil-based aqueous emulsion with 35 % active material. It is mainly used as a mould-stripping agent in foundries, and also has applications in the rubber and plastics industries. Moreover, it is one of the component elements making up polishes and cleaners for artificial leather fabrics (PVC, PUR) and furniture polishes. 收起 | |
| BLUESIL EMUL 872 | Elkem Silicones | BLUESIL EMUL 872 is a slightly anionic aqueous emulsion with a 60% dry content, for general purposes. This is a concentrated version of BLUESIL EMUL E1P. | |
| BLUESIL EMUL E1P | Elkem Silicones | BLUESIL EMUL E1P is an oil in water emulsion containing 35 % of a silicone oil. It can be used in many industries. | |
| BLUESIL EMUL E1P U1 | Elkem Silicones | BLUESIL EMUL E1P U1 is a general purpose, non-ionic, aqueous silicone emulsion. | |
| BLUESIL EMULSION 2400 | Elkem Silicones | BLUESIL EMUL 2400 is a general purpose; non-ionic oil in water silicone emulsion of a methyl-hydrogen polysiloxane. | |
| BLUESIL FLD 21625 | Elkem Silicones | BLUESIL FLD 21625is anα/ω-epoxy functionalised polydimethylsiloxane fluid. | |
| BLUESIL FLD 45 | Elkem Silicones | BLUESIL FLD 45 is a low viscosity dimethylpolysiloxane oil used to prevent floating and flooding and improve leveling of air-drying paints. | |
| BLUESIL FLD 47V1 000 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V100 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V350 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V50 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL FLD 47V500 | Elkem Silicones | BLUESIL FLD 47 V 50 to 47 V 1000 are straight chained polydimethylsiloxanic fluids. | |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BLUESIL RES 6405 | Elkem Silicones | BLUESIL RES 6405 is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6405X | Elkem Silicones | BLUESIL RES 6405X is a 50% solids methylphenylsilicone resin in Toluene (6405) or Xylene solution (6405X). This resin is ideal for the formulation of heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6406XM | Elkem Silicones | BLUESIL RES 6406XM is a 60% solids methylphenylsilicone resin in Xylene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6407 | Elkem Silicones | BLUESIL RES 6407 is a 70% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| BLUESIL RES 6482X | Elkem Silicones | BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It i...展开 BLUESIL RES 6482X is a reactive silicone resin which was developed for use in the manufacture of decorative medium temperature paints. Currently this resin is mainly used for the manufacture of air drying, temperature resistant silicone alkyd paints. It is also more compatible than other silicones with urea-formaldehyde, melamine-formaldehyde, epoxy, polyurethane and acrylic resins. Another use is as an additive for epoxy paints. It also improves weathering resistance. 收起 | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3300 | Elkem Silicones | BLUESIL SP 3300 is a non hydrolysable silicone polyether copolymer. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3303 | Elkem Silicones | BLUESIL SP 3303 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3307 | Elkem Silicones | BLUESIL SP 3307 is a polyether modified polysiloxane. | |
| BLUESIL SP 3309 | Elkem Silicones | BLUESIL SP 3309 is a polyether modified trisiloxane. | |
| BLUESIL TCS 7001 | Elkem Silicones | BLUESIL TCS 7001 is an alkyl polysiloxane solution in solvent phase specifically developed for the waterproofing of fabrics and leathers exposed to difficult weather conditions by spraying or impregnating. | |
| Brufablend® Green E 27500 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的绿色颜料,用于工业及粉末涂料 | |
| Brufablend® Green E 27501 Based on Bismuth Vanadate (PY184) | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的绿色颜料,用于工业及粉末涂料 | |
| Brufablend® Green E 27502 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的绿色颜料,用于工业及粉末涂料 | |
| Brufablend® Green E 27510 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的绿色颜料,用于工业及粉末涂料 | |
| Brufablend® Orange E 27120 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款有机/无机混合粉末橙色颜料。 | |
| Brufablend® Orange ES 27120 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的橙色颜料,同Brufasol 橙120LM一样且不含铅,用于工业及粉末涂料 | |
| Brufablend® Orange ES 27140 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款有机/无机混合粉末橙色颜料。 | |
| Brufablend® Orange H 27120 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款有机/无机混合粉末橙色颜料。 | |
| Brufablend® Orange H 27140 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款粉末状橙色有机/无机混合颜料。 | |
| Brufablend® Red E 27150 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款粉末状红色有机/无机混合颜料。 | |
| Brufablend® Red E 27300 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款粉末状红色有机/无机混合颜料。 | |
| Brufablend® Red ES 27150 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款粉末状红色有机/无机混合颜料。 | |
| Brufablend® Red ES 27300 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | P.R.254同无机颜料干混而成的红色颜料,同Brufablend 红3000M一样且不含铅,用于工业,卷材及粉末涂料 | |
| Brufablend® Red H 27150 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款粉末状红色有机/无机混合颜料。 | |
| Brufablend® Yellow E 27021 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | Brufablend® Yellow E 27021 is a combination organic/inorganic pigment. It is supplied as a yellow powder. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. | |
| Brufablend® Yellow E 27271 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄271M一样且不含铅,用于工业及粉末涂料 | |
| Brufablend® Yellow E 27311 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 干粉黄色颜料混合物，基于钒酸铋（P.Y. 184）与有机颜料的混合物。不含铅，等同于Brufasol Yellow 311M。用于工业涂料 | |
| Brufablend® Yellow E 27541 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄1520M一样且不含铅,用于工业及粉末涂料 | |
| Brufablend® Yellow E 27543 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄Y543M一样且不含铅,用于工业涂料 | |
| Brufablend® Yellow E 27711 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄4711M一样且不含铅,用于工业及粉末涂料 | |
| Brufablend® Yellow E 27727 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄1727M一样且不含铅,用于工业及粉末涂料 | |
| Brufablend® Yellow E 27810 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄81S1M一样且不含铅,用于工业涂料 | |
| Brufablend® Yellow E 27835 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄835M一样且不含铅,用于工业涂料 | |
| Brufablend® Yellow E 27860 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄860M一样且不含铅,用于工业涂料 | |
| Brufablend® Yellow E 27870 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄870M一样且不含铅,用于工业涂料 | |
| Brufablend® Yellow E 27880 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄880M一样且不含铅,用于工业涂料 | |
| Brufablend® Yellow E 28073 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 有机/无机混合颜料 | |
| Brufablend® Yellow E 28100 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款有机和无机混合钒酸铋颜料。特别适合于pH值在7－8范围的配方体系。 | |
| Brufablend® Yellow ES 27833 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄83 S3M一样且不含铅,用于工业,卷材及粉末涂料 | |
| Brufablend® Yellow ES 27865 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄86 S5M一样且不含铅,用于工业,卷材及粉末涂料 | |
| Brufablend® Yellow ES 27887 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184)同有机颜料干混而成的黄色颜料,同Brufasol 黄88S7M一样且不含铅,用于工业涂料 | |
| Brufablend® Yellow L 27311 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 粉末状有机/无机混合颜料，黄色。 | |
| Brufablend® Yellow L 27543 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 有机/无机混合颜料，设计用于室内应用，需要热稳定性达140°C (240° F)的自干体系 | |
| Brufablend® Yellow L 27711 | Bruchsaler Farbenfabrik | 一款有机和无机混合颜料。特别适合于要求耐高温性达到140°C (240° F)的室内用气干体系。 | |
| Brufablend® Yellow L 27727 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 一款有机和无机混合颜料。专门为室内用气干配方体系设计。 | |
| Brufasol® Yellow AL 2300 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | 钒酸铋颜料 | |
| Brufasol® Yellow AL 2301 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | Brufasol® Yellow AL 2301 is a surface-modified bismuth vanadate pigment. It is easily dispersible and offers increased color strength. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternati...展开 Brufasol® Yellow AL 2301 is a surface-modified bismuth vanadate pigment. It is easily dispersible and offers increased color strength. The C.I. No. for this product is 771740 and the colour index is Pigment Yellow 184 (PY184). This product is an alternative to a chrome yellow with high opacity and has excellent weather fastness. This product is widely used in coil coating, powder coating, automotive coating, construction coating, plastic, masterbatch and more. All our products are lead and chrome free and are an excellent replacement for lead chromate and molybdate pigments. 收起 | |
| Brufasol® Yellow AL 30 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184), 比AL23更红相.用于工业,卷材及粉末涂料 | |
| Brufasol® Yellow AL 40 Bismuth Vanadate PY184 | Bruchsaler Farbenfabrik | 钒酸铋黄(P.Y.184), 比AL30更红相.用于工业,卷材及粉末涂料 | |
| Brufatec® Orange 29070 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 有机/无机混合颜料 | |
| Brufatec® Orange H 29070 Based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 有机/无机混合颜料 | |
| Brufatec® Red 29100 based on Bismuth Vanadate | Bruchsaler Farbenfabrik | 有机/无机混合颜料 | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| CAF 2534 | Elkem Silicones | CAF 2534 is a one component silicone rubber that cures when in contact with air humidity. It is intended for use as a formulation base for the development of tie-coats in the fouling release treatment of boat hulls. | |
| CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起 | |
| CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings. | |
| CENOBEADS™ CZS (Zirconium Silicate Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings. | |
| CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起 | |
| CenoFlour | CENOTEC Co., Ltd. | CenoFlour is a zircon powder that is a primary source for ceramic and ceramic colors. It can also be used as an abrasive cleaner and for welding rod coatings. | |
| CenoSilicate (Premium) | CENOTEC Co., Ltd. | CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint. | |
| CenoSilicate (Ultra Premium) | CENOTEC Co., Ltd. | CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes. | |
| DOWSIL™ 100F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...展开 Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. 收起 | |
| DOWSIL™ 102F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency t...展开 Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. 收起 | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...展开 DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. 收起 | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethyle...展开 Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. 收起 |
