| Aquaban® 9001A | The International Group, Inc. (IGI Wax) | Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution ...展开 Aquaban® 9001A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. This product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. 收起 | |
| Aquaban® 9009A | The International Group, Inc. (IGI Wax) | Aquaban® 9009A is a water-based treatment for paper and corrugated board. It imparts a high level of water repellence. | |
| Aquaban® 9010A | The International Group, Inc. (IGI Wax) | Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection ...展开 Aquaban® 9010A is a concentrated general purpose water-based treatment for paper and corrugated board. It imparts a high level of water repellence. For corrugated application, the product should be diluted with water before use, depending upon protection required. Typical dilution is 1:1 with water. For general purpose application other than corrugated, the product can be used without dilution. 收起 | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Bake-Guard 9156A | The International Group, Inc. (IGI Wax) | Bake-Guard 9156A is a high performance water-based coating for corrugated board and paper substrates where exceptional grease and water resistance are required. Other unique features of this product are its high angle of slide and ease of printability. | |
| Barrier-Grip 9471A | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9471B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9471B is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip 9472B | The International Group, Inc. (IGI Wax) | Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the...展开 Barrier-Grip 9472B is a water-based coating designed as an economical pre-coat for application onto kraft liners or other paper substrates. It seals the substrate and provides a uniform surface onto which functional coatings may be applied, optimising the performance of the functional coatings. 收起 | |
| Barrier-Grip R5701H | The International Group, Inc. (IGI Wax) | Barrier-Grip R5701H is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Grip R6709A | The International Group, Inc. (IGI Wax) | Barrier-Grip R6709A is a water-based product that provides a high performance barrier against water and grease when applied to a paper based substrate. Coated surface also exhibits exceptionally high slide angle. | |
| Barrier-Seal R6728A | The International Group, Inc. (IGI Wax) | Barrier-Seal R6728A is a water-based coating designed for SBS cup stock and other paper based substrates. It can be used for any packaging application that requires excellent water resistance, oil resistance and heat seal. | |
| CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable ...展开 CENOBEADS™ CZC (Ceria Stabilized Zirconia Bead) is a high density zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCO3. It has been applied to the grinding CaCO3 for high viscosity paper coating. It is also suitable for the production of high-viscosity paints and inks. 收起 | |
| CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZM (Zirconia Toughened Alumina Bead) is a zirconia bead that is used in grinding machines that provides more grinding efficiency. It is suitable for magnetic coatings. | |
| CENOBEADS™ CZS (Zirconium Silicate Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZS (Zirconium Silicate Bead) is a zirconium bead that has high wear resistance and is suitable for large capacity vertical mills for dispersion of CaCO3 . It is suitable for paints, inks, pigments, dyes, and magnetic coatings. | |
| CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) | CENOTEC Co., Ltd. | CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-qu...展开 CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) is a zirconia bead that is suitable for large capacity vertical mills for dispersion of CaCo3. CENOBEADS™ CZY (Yttria Stabilized Zirconia Bead) has high density and hardness, making it suitable for high-quality products, such as automobile paints and inks. 收起 | |
| CenoSilicate (Premium) | CENOTEC Co., Ltd. | CenoSilicate(Premium) is an off-white zircon powder silicate used as an opacifier for pottery and porcelain glazes. It can also be used as a filler for resin and paint. | |
| CenoSilicate (Ultra Premium) | CENOTEC Co., Ltd. | CenoSilicate (Ultra Premium) is an off-white zircon powder with silicate used as a filler for resin and paint. It can also be used in epoxy resins and as an opacifier for pottery and porcelain glazes. | |
| DOWSIL™ 100F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...展开 Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. 收起 | |
| DOWSIL™ 102F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency t...展开 Dow Corning® 102F Additive is a highly effective foam control agent for solvent based coating systems, which offers optimal defoaming and antifoaming at very low addition levels. It shows good compatibility in solvent based coatings and has low tendency to cause craters or impact gloss or clarity of the coatings. 收起 | |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...展开 DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. 收起 | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethyle...展开 Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. 收起 | |
| DOWSIL™ 11 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂添加剂，用于溶剂型涂装时具备滑爽性和流平性。 | |
| DOWSIL™ 14 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂添加剂，用于水性和溶剂型涂装时具备滑爽性和流平性，用于水性体系时具备耐划伤性。 | |
| DOWSIL™ 163 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于溶剂型和UV涂料以及溶剂型和水性油墨的泡沫控制添加剂。 | |
| DOWSIL™ 18 Additive | Dow Performance Silicones Paints, Inks and Coatings | 高分子量聚二甲基硅氧烷分散体。用于树脂和极性溶剂等极性体系的一种独特的分散载体。 | |
| DOWSIL™ 204SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether co...展开 Dow Corning® 204SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent, multiple properties in radiation curable coatings. It can also be used for solventborne coating formulations. This 100% silicone polyether copolymer allows for low VOC, low addition levels and formulation flexibility. 收起 | |
| DOWSIL™ 205SL Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...展开 Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. 收起 | |
| DOWSIL™ 210S Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and...展开 Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. 收起 | |
| DOWSIL™ 211S Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...展开 DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. 收起 | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | ||
| DOWSIL™ 27 Additive | Dow Performance Silicones Paints, Inks and Coatings | 无电抗性甘醇硅氧烷表面活性剂，兼具硅氧烷和有机物的特点。主要用于降低摩擦系数。 | |
| DOWSIL™ 29 Additive | Dow Performance Silicones Paints, Inks and Coatings | 甲醇官能硅树脂乙二醇表面活性剂，用来改善流平和润湿性，提高光泽度。 | |
| DOWSIL™ 3 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅烷醇官能性硅树脂，用于颜料处理并改善流平。 | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | 水性硅树脂弹性体悬浮液-提供涂层的触觉特性，能够赋予水性塑料涂料以柔软的手感；为聚丙烯酸和聚氨酯木器漆提供平滑的表面效果。 | |
| DOWSIL™ 401LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat f...展开 Dow Corning® 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起 | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...展开 DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. 收起 | |
| DOWSIL™ 402LS Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clea...展开 Dow Corning® 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. 收起 | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...展开 Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 收起 | |
| DOWSIL™ 51 Additive | Dow Performance Silicones Paints, Inks and Coatings | 水分散型超高分子量聚二甲基硅树脂分散体，具有滑爽性和耐划伤性。 | |
| DOWSIL™ 52 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种低粘度, 可流动性助剂，用于提高耐划伤性和滑爽性，用于含极性溶剂的水性和溶剂型涂料。使水性涂料具有耐水性；并赋予涂料流平性、润湿性和光泽度。 | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种100%活性份的硅树脂乙二醇共聚物，应用在油墨中可起到滑爽、耐划伤和改善流平的作用。 | |
| DOWSIL™ 55 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅树脂乙二醇共聚物，赋予水性涂料以滑爽性、耐划伤性和流平性。 | |
| DOWSIL™ 56 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅氧烷添加剂，消除溶剂型体系中的微泡沫，并作为流平助剂。 | |
| DOWSIL™ 57 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于油墨和涂料的添加剂，用来改善流平、提高摩擦系数、增强耐划伤性、光泽度和颜料分散性。 | |
| DOWSIL™ 61 Paint Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each ...展开 Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone 收起 | |
| DOWSIL™ 62 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于油墨和涂料涂装的水性硅树脂防泡剂。 | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于水性涂料的硅树脂润湿剂。特点是低黏度、低表面张力，具有良好的扩散性和润湿性，高闪点，溶于水。 | |
| DOWSIL™ 68 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 68 Additive is an alkyl phenol ethoxylate-free silicone foam control agent. It is used for reducing foam and maintaining foam control during the production, handling and application of water-based inks, coatings and paints. | |
| DOWSIL™ 7 Additive | Dow Performance Silicones Paints, Inks and Coatings | 用于溶剂型油墨和涂料的泡沫控制和流平/润湿助剂。 | |
| DOWSIL™ 700P Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze...展开 Dow Corning® 700P Additive is alkoxy siloxane with organic group and it provides high efficiency to disperse inorganic pigment, especially titanium dioxide. Only 10–15% dosage of ordinary dispersants is needed to get fine particles and high gloss/low haze of paint. It also keeps good stabilization of pigment dispersion so that it can effectively prevent pigment flooding and floating when tinting. Unlike traditional anti-flooding additives which operate by controlled flocculation, this product does not increase viscosity and does not negatively impact gloss. 收起 | |
| DOWSIL™ 71 Additive | Dow Performance Silicones Paints, Inks and Coatings | 对水性涂料有效的泡沫控制；低浓度应用，不含憎水粒子，高剪切混合下稳定。特别用于水性油墨，有效的泡沫控制和良好的表面外观之间的平衡性较好。 | |
| DOWSIL™ 74 Additive | Dow Performance Silicones Paints, Inks and Coatings | 硅氧烷聚合物泡沫控制剂。 | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种用于水性油墨的硅树脂添加剂。 | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | 一种用于水性油墨的硅树脂添加剂。 | |
| DOWSIL™ 8526 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling ag...展开 Dow Corning® 8526 Additive is an easy-to-use, high performance silicone polyether additive that gives improved leveling and slip in waterborne solvent based and UV curing formulations at low addition levels. It may be used as effective slip or leveling agent in waterborne coating, solvent-based coating and UV curable coating. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emuls...展开 Dow Corning® 8590 Additive is a 100% active silicone antifoam compound with silica. It shows good compatibility in waterborne coatings and ink systems and has a low tendency to cause surface defects. This product is recommended for a acrylic styrene emulsion paint for architectural wall coatings, waterborne flexo gravure inks, waterborne acrylic overprint varnishes, and acrylic urethane emulsion paints for wood. 收起 | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...展开 DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 收起 | |
| DOWSIL™ 8603 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styr...展开 Dow Corning® 8603 Additive is a 100% active silicone antifoam compound with silica. It offers effective foam control for waterborne coating systems, and performs at low dosages. This product is recommended for waterborne interior wall paints, acrylic styrene emulsion paints, waterborne flexo gravure inks, waterborne polyester acrylic coatings, and waterborne acrylic modified alkyd coatings. 收起 | |
| DOWSIL™ 8621 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起 | |
| DOWSIL™ 8628 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low te...展开 Dow Corning® 8621 Additive is a fluorosilicone supplied at 5% active concentration. It gives efficient foam control at very low addition level without surface defects in solvent based paints and UV curable coating. This product is also effective at low temperatures, which makes it suitable for the winter season. 收起 | |
| DOWSIL™ 87 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 87 Additive is a 40% active silane based emulsion. It can be used in waterborne acrylic formulations to improve water repellency. This product is solvent and APEO free, and is recommended for waterborne decorative coatings. | |
| DOWSIL™ 88 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coati...展开 Dow Corning® 88 Additive is a 98% active silane/siloxane concentrate. It can be used in polar and non-polar solvent containing acrylic formulations to improve water repellency. This product can be used for the formulation of solvent-borne decorative coatings and in waterborne formulations containing polar solvents. 收起 | |
| DOWSIL™ Z-6121 Silane | Dow Performance Silicones Paints, Inks and Coatings | 提高溶剂型涂料的附着力，提供颜料处理。 | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | 附着力促进剂可作为添加剂或底层涂料用于水性体系，用来提高有机主体树脂和无机基材之间的结合力。 | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...展开 IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. 收起 | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...展开 IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. 收起 | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| MODIPER® A4100 | NOF Corporation | MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pi...展开 MODIPER® A4100 is an ethylene-glycidyl metharylate polystyrene copolymer. It is a modifier for various polymers used to improve the mechanical properties and surface properties of thermoplastic resins. This product is a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4300 | NOF Corporation | MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a di...展开 MODIPER® A4300 is an ethylene-glycidyl metharylate buthyl acrylate-methyl metharylate polyamide. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is well suited for as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A4400 | NOF Corporation | MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A4400 is an ethylene-glycidyl metharylate acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5300 | NOF Corporation | MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of...展开 MODIPER® A5300 is an ethylene-ethyl acrylate-based buthyl acrylate-methyl metharylate copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® A5400 | NOF Corporation | MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fi...展开 MODIPER® A5400 is an ethylene-ethyl acrylate-based acrylonitrile-styrene copolymer. It is a modifier for various polymers to improve mechanical properties and surface properties of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L130D | NOF Corporation | MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fille...展开 MODIPER® C L130D is a polycarbonate-based polystyrene copolymer. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 | |
| MODIPER® C L430-G | NOF Corporation | MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility...展开 MODIPER® C L430-G is a polycarbonate-based glycidyl metharylate-acrylonitrile-styrene copolymer formulated to improve welding strength in PC/ABS. It is a modifier for various polymers to improve mechanical properties, surface properties, and compatibility of thermoplastic resins. This product is used as a dispersant of inorganic fillers, pigment and additives. 收起 |
