| POL-B3000 | Qingdao Xinyutian Chemical Co., Ltd. | POL-B3000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this ...展开 POL-B3000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Melting Point of 32°C and a Molecular Weight of 3000. 收起 | |
| POL-B3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-B3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this ...展开 POL-B3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Melting Point of 50°C and a Molecular Weight of 3500. 收起 | |
| POL-B6500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-B6500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this ...展开 POL-B6500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Melting Point of 57°C and a Molecular Weight of 6500. 收起 | |
| POL-BD3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-BD3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this...展开 POL-BD3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Molecular Weight of 3500 and a Melting Point of 52°C. 收起 | |
| POL-BS3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-BS3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this...展开 POL-BS3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Molecular Weight of 3500 and a Melting Point of 65°C. 收起 | |
| POL-BT3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-BT3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this...展开 POL-BT3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Molecular Weight of 3500 and a Melting Point of 85°C. 收起 | |
| POL-D3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-D3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this ...展开 POL-D3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Melting Point of 72°C and a Molecular Weight of 3500. 收起 | |
| POL-E2000 | Qingdao Xinyutian Chemical Co., Ltd. | POL-E2000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this ...展开 POL-E2000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Hydroxyl Value of 53-59 mgKOH/g and a Molecular Weight of 2000. 收起 | |
| POL-E3000 | Qingdao Xinyutian Chemical Co., Ltd. | POL-E3000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this ...展开 POL-E3000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Hydroxyl Value of 35-41 mgKOH/g and a Molecular Weight of 3000. 收起 | |
| POL-E3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-E3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this ...展开 POL-E3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Hydroxyl Value of 30-34 mgKOH/g and a Molecular Weight of 3500. 收起 | |
| POL-HP56 | Qingdao Xinyutian Chemical Co., Ltd. | POL-HP56 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This pa...展开 POL-HP56 is a polyol from the Other Compound Series that is widely used in adhesives, coatings, artificial leathers, shoe soles and elastomers. The products in this series are mainly liquid at room temperature and are solid at colder temperatures. This particular grade has a Molecular Weight of 2000 but that can be adjusted to meet the needs of the customer. These compounds provide the products the ability to be abrasion resistance, tear resistant, and have good folding-endurance. 收起 | |
| POL-I-345 | Qingdao Xinyutian Chemical Co., Ltd. | POL-I-345 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2500. It has other go...展开 POL-I-345 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2500. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 32-56 mgKOH/g. 收起 | |
| POL-N2000 | Qingdao Xinyutian Chemical Co., Ltd. | POL-N2000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this ...展开 POL-N2000 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Molecular Weight of 2000 and a Hydroxyl Value of 53-59 mgKOH/g. 收起 | |
| POL-S3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-S3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this ...展开 POL-S3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Melting Point of 62°C and a Molecular Weight of 3500. 收起 | |
| POL-T056 | Qingdao Xinyutian Chemical Co., Ltd. | POL-T056 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other goo...展开 POL-T056 is a polyol from the Phthalic Anhydride and Other Aromatic Diacid Series, and it is specially developed for use in coatings, adhesives and rigid foams. This product is solid at room temperature and has a molecular weight of 2000. It has other good physical properties with a Water Value that is <0.03% and a Hydroxyl Value of 53-59 mgKOH/g. 收起 | |
| POL-T3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-T3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this ...展开 POL-T3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series are typically solid at room temperature and have good crystallization. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Melting Point of 110°C and a Molecular Weight of 3500. 收起 | |
| POL-TD3500 | Qingdao Xinyutian Chemical Co., Ltd. | POL-TD3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this...展开 POL-TD3500 is a polyol that is part of the Reactive Polyurethane Hot Melt Adhesives Polyester Polyol Series. The products from this series have good crystallization and are typically solid at room temperature. Hot melt adhesives that use Polyols from this series will have a strong initial bond, low construction temperature and high tensile strength. This particular grade has a Melting Point of 123°C and a Molecular Weight of 3500. 收起 | |
| PUS-60 | Qingdao Xinyutian Chemical Co., Ltd. | PUS-60 is a transparent or translucent one-liquid type dry polyurethane resin used in spray ink formulations. This product contains a hard grade, good resilience, no drawing and quick drying making it useful when the surface viscosity is low. It is common...展开 PUS-60 is a transparent or translucent one-liquid type dry polyurethane resin used in spray ink formulations. This product contains a hard grade, good resilience, no drawing and quick drying making it useful when the surface viscosity is low. It is commonly applied to synthetic leather, handicrafts, toys, shoes and more. 收起 | |
| RHEOBYK-100 | BYK 毕克 | RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings an...展开 RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings and general industrial coatings. RHEOBYK-100 is also particularly suitable for use in thick-layered epoxy and vinyl resin systems. 收起 | |
| RHEOBYK-405 | BYK 毕克 | 用于溶剂型体系的触变添加剂。最适合用于基于聚酯、丙烯酸和醇酸树脂，含气相二氧化硅的涂料。气相二氧化硅必须具备至少部分的亲水性。 | |
| RHEOBYK-410 | BYK 毕克 | 用于溶剂型和无溶剂型涂料的液态流变添加剂。使用后可在体系内形成一种假塑性，其触变型流动特性可以防止沉淀和流挂。可以后添加，使用简便。 | |
| RHEOBYK-411 | BYK 毕克 | 用于溶剂型和无溶剂型涂料的液态流变添加剂。使用后可在体系内形成一种假塑性，其触变型流动特性可以防止沉淀和流挂。由于产品呈液态，因而使用简便。 | |
| RHEOBYK-415 | BYK 毕克 | RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces....展开 RHEOBYK-415 is a liquid rheology additive for solvent-borne baking coatings and forced drying systems to improve anti-sagging properties. It works together with the binder and builds a three-dimensional network via hydrogen bonds and van der Waals forces. In addition to the dosage level and the polarity of the system, the degree of disentanglement of the higher molecular weight additive is key to the effectiveness. The higher molecular weight and the more pronounced pseudoplastic flow behavior are the reasons for the more temperature-stable viscosity behavior of RHEOBYK-415, even at higher drying temperatures. 收起 | |
| RHEOBYK-420 | BYK 毕克 | 用于水性涂料和颜料浓缩浆的液体流变助剂，加入后能形成三维网络，这样形成的触变流动性防止沉降和改善流挂性，应加入到研磨基料中。 | |
| RHEOBYK-425 | BYK 毕克 | 用于水性涂料和浓缩颜料的液态流变添加剂。适用于水性和水稀释性体系。该添加剂可产生一种假塑性的流动特性，可以提高抗流挂性和抗沉淀性。不含VOC及APEO。与多种水性树脂体系有广泛的相容性。 | |
| RHEOBYK-430 | BYK 毕克 | 用于溶剂型体系(重型、防护型、抗腐蚀和一般工业涂料)的液态触变控制添加剂。 | |
| RHEOBYK-431 | BYK 毕克 | 用于溶剂型体系的液态触变控制添加剂。 | |
| RHEOBYK-440 | BYK 毕克 | RHEOBYK-440 is a liquid rheology additive based on a polyamide to improve the anti-sagging and anti-settling properties as well as the effect pigment orientation in aqueous coating systems. Extremely shear-thinning. | |
| RHEOBYK-7405 | BYK 毕克 | RHEOBYK-7405 is an aromatic- and tin-free rheology additive for solvent-free and solvent-borne systems to enhance the rheological properties in conjunction with organophilic phyllosilicates and hydrophilic fumed silica. | |
| RHEOBYK-7410 CA | BYK 毕克 | RHEOBYK-7410 CA is a liquid rheology additive to produce a highly thixotropic flow behavior for medium-polar solvent-borne and solvent-free systems. | |
| RHEOBYK-7410 ET | BYK 毕克 | RHEOBYK-7410 ET is a liquid rheology additive to generate highly thixotropic flow behavior for medium-polarity solvent-borne and solvent-free systems. | |
| RHEOBYK-7411 CA | BYK 毕克 | RHEOBYK-7411 CA is a liquid rheology additive for low-polarity solvent-borne and solvent-free systems to produce a highly thixotropic flow behavior and to improve anti-sagging and anti-settling properties. | |
| RHEOBYK-7411 ES | BYK 毕克 | RHEOBYK-7411 ES is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems and cleaning products to generate highly thixotropic flow behavior and to improve the anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 CA | BYK 毕克 | RHEOBYK-7420 CA is a liquid rheology additive to produce thixotropic flow behavior in aqueous and highly polar systems for improving anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 ES | BYK 毕克 | RHEOBYK-7420 ES is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | |
| RHEOBYK-7420 ET | BYK 毕克 | RHEOBYK-7420 ET is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | |
| RHEOBYK-7502 | BYK 毕克 | RHEOBYK-7502 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems. | |
| RHEOBYK-7503 | BYK 毕克 | RHEOBYK-7503 is an organic rheology additive in powder form for increasing the stability of single component, silane-modified prepolymer systems, epoxy systems, and alkyd-based coating systems. | |
| RHEOBYK-7590 | BYK 毕克 | RHEOBYK-7590 is a powdered rheology additive for non-polar solvent-borne systems, powder coatings, adhesives and sealants. It is suitable for systems based on aliphatic non-polar solvents. The main fields of application are alkyd resin coatings such as ar...展开 RHEOBYK-7590 is a powdered rheology additive for non-polar solvent-borne systems, powder coatings, adhesives and sealants. It is suitable for systems based on aliphatic non-polar solvents. The main fields of application are alkyd resin coatings such as architectural coatings, glazes and general industrial coatings as well as protective coatings. 收起 | |
| RHEOBYK-7591 | BYK 毕克 | RHEOBYK-7591 is a rheology and processing additive for powder coatings particularly suitable for use in powder coating systems, and in this segment it is broadly compatible with various binders. | |
| RHEOBYK-7600 | BYK 毕克 | RHEOBYK-7600 is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems, to generate a highly pseudoplastic flow behavior. | |
| RHEOBYK-7610 | BYK 毕克 | RHEOBYK-7610 is a VOC-, APEO- and tin-free associative thickener for aqueous systems, to generate a highly pseudoplastic flow behavior. | |
| RHEOBYK-D 410 | BYK 毕克 | RHEOBYK-D 410 is a liquid rheology additive for medium-polarity solvent-borne and solvent-free systems to generate highly thixotropic flow behavior. After being stirred into the coating system, the additive generates a three-dimensional network structure....展开 RHEOBYK-D 410 is a liquid rheology additive for medium-polarity solvent-borne and solvent-free systems to generate highly thixotropic flow behavior. After being stirred into the coating system, the additive generates a three-dimensional network structure. The resulting thixotropic flow behavior is highly suited for preventing sedimentation and increasing the anti-sagging properties without impairing leveling. 收起 | |
| RHEOBYK-D 420 | BYK 毕克 | RHEOBYK-D 420 is a liquid rheology additive for aqueous systems to generate thixotropic flow behavior. It is preferably used as an anti-settling additive to produce aqueous pigment, filler and matting agent concentrates. The additive's excellent shear thi...展开 RHEOBYK-D 420 is a liquid rheology additive for aqueous systems to generate thixotropic flow behavior. It is preferably used as an anti-settling additive to produce aqueous pigment, filler and matting agent concentrates. The additive's excellent shear thinning effect is advantageous for dosing such concentrates because of their low viscosity. In addition, it is suitable for controlling the thixotropic flow behavior and for optimizing the anti-sagging properties and leveling. 收起 | |
| RHEOBYK-H 3300 VF | BYK 毕克 | OPTIFLO® H3300 VF是不含VOC的聚合物溶液，用于产生低剪切粘度。它是一种疏水改性的非离子型聚合物水溶液，通常被称为缔合增稠剂。使用OPTIFLO® H3300 VF将通过产生低剪切粘度增加体粘度，对高剪切粘度具有一定的影响。 | |
| RHEOBYK-H 6500 VF | BYK 毕克 | OPTIFLO® H6500 VF是疏水改性的非离子型聚合物水溶液，通常被称为缔合增稠剂。它不含VOC和不含APEO。使用本产品会增加低剪切流变，如Stormer粘度，并改善流挂控制和一些高剪切或ICI粘度。 | |
| RHEOBYK-H 7500 VF | BYK 毕克 | OPTIFLO® H7500 VF 是一种HEUR基非离子型缔合增稠剂，其目的是用作水性油漆和涂料的增稠剂。它主要是用来产生KU或中等剪切粘度和流挂控制，用于难增稠体系如VAE、VaVEOVA和乙烯基丙烯酸胶乳体系。它相比传统HEUR基聚合物可采用较低使用量，由于它可与这些低VOC基料如VAE体系形成强相互作用。该产品比常规系统高效达25％。常见的应用包括水性油漆和涂料、工业涂料、水性胶黏剂、乳液基胶黏剂、屋顶涂料、封泥和密封化合物。 | |
| RHEOBYK-H 7625 VF | BYK 毕克 | RHEOBYK-H 7625 VF is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems to generate highly pseudoplastic flow behavior. It dramatically increases viscosity in the low shear range. It reduces the sagging tendency and increases stor...展开 RHEOBYK-H 7625 VF is a VOC-, APEO- and tin-free associative thickener (HEUR) for aqueous systems to generate highly pseudoplastic flow behavior. It dramatically increases viscosity in the low shear range. It reduces the sagging tendency and increases storage stability. The additive is liquid and therefore easy to handle. It is not necessary to adjust the pH value or control the temperature during incorporation. Combining with rheology additives that are effective in the same high shear range as the RHEOBYK-L/T series, results in optimum processability. 收起 | |
| RHEOBYK-HV 80 | BYK 毕克 | OPTIFLO® HV80是疏水改性的碱溶性乳液聚合物，可有效用于水性建筑和工业水性涂料，产生高Stormer（KU）和ICI粘度。使用本产品提供了一种经济有效的方法，为平光，缎光和半光配方生成流变性能。 | |
| RHEOBYK-L 1400 VF | BYK 毕克 | OPTIFLO® L1400是疏水改性的非离子聚合物水溶液，通常被称为缔合增稠剂。本产品设计用于厚乳液（乳胶）油漆。它可用于丙烯酸、苯乙烯/丙烯酸和乙酸乙烯酯共聚物胶乳。 | |
| RHEOBYK-M 2600 VF | BYK 毕克 | OPTIFLO® M2600 VF是一种非离子型，疏水改性聚合物，特别适用于乳液涂料和水性涂料体系的增稠。它可用于各种乳液，例如苯乙烯丙烯酸酯、纯丙烯酸酯、聚醋酸乙烯酯、聚氨酯和其它，以及醇酸树脂和环氧乳液。使用本产品不会给涂料增加VOC溶剂，并改善耐起泡性能。它也可显著增加表观粘度，提供极佳的流动和流平性，一遍涂覆即可产生更高的涂膜厚度，并在施工过程中减少飞溅。 | |
| RHEOBYK-R 607 | BYK 毕克 | BYK-R 607是一种流变助剂，用于非溶剂和溶剂型体系，可结合亲水性气相二氧化硅和粘土添加剂使用，提高流变性能。它使亲水性气相法二氧化硅或粘土添加剂可以单独使用于双组分环氧体系。当使用BYK-R 607，没有必要使用环氧树脂中疏水性气相法二氧化硅和固化剂中亲水性气相法二氧化硅，以获取非常高的膜厚。此产品推荐用于环氧树脂体系、聚氨酯体系、丙烯酸酯体系、防护涂料和一般工业涂料。 | |
| RHEOBYK-T 1000 VF | BYK 毕克 | OPTIFLO T1000是疏水改性的非离子型聚合物水溶液，通常被称为缔合增稠剂。它可高效增加ICI或高剪切粘度，不含VOC和在溶液中粘度低。使用本产品将通过产生高剪切粘度提高成膜性，低剪切粘度下影响微乎其微。 | |
| RHEOBYK-T 1010 VF | BYK 毕克 | RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as...展开 RHEOBYK-T 1010 VF is a VOC-free associative thickener (HEUR) for aqueous systems to generate Newtonian flow behavior. It is preferably used in emulsion paints and coatings that are based on acrylics, styrene acrylics and vinyl acetate copolymer binders as well as PU and alkyd emulsions. It is also well suited for aqueous wood and furniture coatings based on PU, acrylics and UV-curing systems. 收起 | |
| SILBIONE CAF 72576 RED | Elkem Silicones | SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 a...展开 SILBIONE CAF 72576 RED is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE CAF 72589 | Elkem Silicones | SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxan...展开 SILBIONE CAF 72589 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat natural or agglomerated bottle corks. SILBIONE CAF 72589 is a solventless product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 70004 | Elkem Silicones | SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based ...展开 SILBIONE DISPERSION CAF 70004 is a one component silicone elastomer, curing at room temperature on contact with atmospheric humidity, used to treat agglomerated bottle corks and especially champagne corks. SILBIONE DISPERSION CAF 70004 is a product based on reactive polymethyl siloxane oils and inert fillers. It can be used as a release coating for materials intended for food contact. 收起 | |
| SILBIONE DISPERSION CAF 71500 GRY | Elkem Silicones | SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS ...展开 SILBIONE DISPERSION CAF 71500 GRY is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71528 | Elkem Silicones | SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71528 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE DISPERSION CAF 71550 | Elkem Silicones | SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF ...展开 SILBIONE DISPERSION CAF 71550 is a one component silicone rubber crosslinking at room temperature by reacting with the moisture in the air. These SILBIONE products contain reactive polydimethylsiloxane oils and inert fillers. The SILBIONE DISPERSIONS CAF 71550 and 71528 are supplied as cyclohexane dispersions (70% solids). The SILBIONE DISPERSION CAF 71500G is supplied as cyclohexane dispersions (50% solids). The SILBIONE CAF 72576 is a 100% solids product. They can be used separately as non-stick coatings for materials in contact with foodstuffs. They can also be used in these applications in the form of a two-layer system which boosts their performance. The product obtained after crosslinking only contains substances that are in conformity with a number of Food Contact legislations. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coating obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILBIONE RES 76405 | Elkem Silicones | SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints develo...展开 SILBIONE RESINE 76405 is a polymethylphenyl-siloxane resin supplied as 50% solution in toluene. SILBIONE RESINE 76405 is used as release coating for materials that will be in contact with foodstuff. This resin can also be used as a binder in paints developed to protect and decorate these materials. The products obtained after crosslinking of SILBIONE RESINE 76405 contain only substances permitted by the Food Contact regulations currently in force. Contact BS for more detailed information. Important remarks: Manufacturers of paints, varnishes or coatings must naturally make sure that the other constituents in their formulas (solvents, pigments, additives, etc.) also comply with the regulations. They must also check that the coatings obtained have been correctly applied, in particular to avoid any risk of migration of constituents. 收起 | |
| SILCOLAPSE 120 | Elkem Silicones | SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aq...展开 SILCOLAPSE 120 is a 100% active compound containing polydimethylsiloxane oil and silica with an excellent behaviour in a large range of pH. SILCOLAPSE 120 is mainly intended for treatment of organic and anhydrous foaming systems. It can also be used in aqueous medium. SILCOLAPSE 120 is designed exclusively for industrial use. 收起 | |
| SILCOLAPSE 416 | Elkem Silicones | SILCOLAPSE 416 is a compound based on polydimethyl siloxane oil and silica. It has the characteristic of being easy to disperse in most foaming mediums. | |
| SILCOLAPSE 426R | Elkem Silicones | SILCOLAPSE 426R is a non-ionic aqueous emulsion based on polydimethylsiloxane oil. It has 30% active matter content and is recommended for the prevention, control or elimination of foam in aqueous systems. | |
| SILCOLAPSE 495 | Elkem Silicones | SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under ...展开 SILCOLAPSE 495 is a high performance silicone antifoam emulsion designed for use in a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 495 gives good results at wide-ranging pH and is effective under highly alkaline or acidic conditions. 收起 | |
| SILCOLAPSE 496 | Elkem Silicones | SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm soli...展开 SILCOLAPSE 496 is a high performance silicone antifoam emulsion designed for use in severe environmental storage conditions and a wide range of aqueous industrial applications. The product effectively controls foam at concentrations as low as 10 ppm solids, even at elevated temperatures and under pressure. SILCOLAPSE 496 gives good results at wideranging pH and is effective under highly alkaline or acidic conditions. The emulsion is freezeprotected to less than -10°C and is stable upon thawing even after repeated freeze thaw cycles below -40°C 收起 | |
| SILCOLAPSE 5020 | Elkem Silicones | SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial use...展开 SILCOLAPSE 5020 is a non-ionic aqueous emulsion containing dimethylpolysiloxane, and is highly effective for prevention, control and elimination of foam in aqueous media. SILCOLAPSE 5020 contains 20% of active ingredient and is designed for industrial uses. Other specialized defoaming agents exist for use in food contact please consult us about them. 收起 | |
| SILCOLAPSE C525 | Elkem Silicones | SILCOLAPSE C525 is a silicone antifoam emulsion with very good water dispersibility and antifoaming efficiency in different aqueous systems. It shows very good stability with side range of pH value. | |
| SILCOLEASE 7611 | Elkem Silicones | SILCOLEASE 7611 is a kind of tri-component solventless type paper release system:Silcolease 7611 (base polymer)Silcolease crosslinker 321(crosslinker)Silcolease catalyst 91B (catalyst). | |
| SILCOLEASE ADD 107 | Elkem Silicones | SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the relea...展开 SILCOLEASE ADD 107 is a silicone based additive used with a reactive solvent based silicone polymer system used for release coating of papers, films and various substrates. It has been especially designed to give excellent long term anchorage of the release system on PET film both when laminated against adhesives and reeled as coated film. 收起 | |
| SILCOLEASE ADD 382 | Elkem Silicones | SILCOLEASE ADD 382 is a silicone based additive used with a reactive solventless silicone polymer system for POLYESTER (PET) FILM RELEASE COATING applications. | |
| SILCOLEASE ADD 702 | Elkem Silicones | SILCOLEASE ADD 702 is a white, granular powder, freely soluble in water and possessing a slight odour of ammonia. It is used with emulsion SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE CATA 11091 M | Elkem Silicones | SILCOLEASE CATALYST 11091 M is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 12070 | Elkem Silicones | SILCOLEASE CATALYST 12070 is a platinum complex mainly used as a catalyst of the solventless SILCOLEASE release systems. | |
| SILCOLEASE CATA 340 | Elkem Silicones | SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high...展开 SILCOLEASE CATA 340 is a platinum catalyst for use with polyaddition solventless release coatings. This catalyst consists of a platinum complex dispersed with a mist-reducing additive and is designed to catalyze release systems that will be coated at high speeds. 收起 | |
| SILCOLEASE CATA 62 A | Elkem Silicones | SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food conta...展开 SILCOLEASE CATALYST 62 A is an organosilicic complex diluted in an aliphatic solvent. It is the catalyst used for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, with the exception of food contact application. 收起 | |
| SILCOLEASE CATA 62 B | Elkem Silicones | SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applicati...展开 SILCOLEASE CATALYST 62 B is an organometallic complex diluted in an aromatic solvent. It is used as catalyst for the solvent based SILCOLEASE 429 system intended for RELEASE COATING of paper, films and various substrates, except for food contact applications. 收起 | |
| SILCOLEASE CATA 90 B | Elkem Silicones | SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALY...展开 SILCOLEASE CATALYST 90 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7420 and 7410, intended for RELEASE COATING of paper, films and various substrates. SILCOLEASE CATALYST 90 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 91 B | Elkem Silicones | SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is use...展开 SILCOLEASE CATALYST 91B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for release coating of paper, film and various substrates: SILCOLEASE 7410 SERIES. SILCOLEASE CATALYST 91B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE CATA 93 B | Elkem Silicones | SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B i...展开 SILCOLEASE CATALYST 93 B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems, such as SILCOLEASE 7440, intended for release coating of paper, films and various substrates. SILCOLEASE CATALYST 93 B is used solely in polyaddition reaction systems. 收起 | |
| SILCOLEASE CATA 94 B | Elkem Silicones | SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in po...展开 SILCOLEASE CATALYST 94B is a platinum complex diluted in a solvent. It is the catalyst used for the solvent based SILCOLEASE systems intended for RELEASE COATING of paper, film and various substrates: SILCOLEASE 7450. SILCOLEASE CATALYST 94B is used in polyaddition reaction only. The release properties of the coating can be modified. 收起 | |
| SILCOLEASE EMUL RCA 954 | Elkem Silicones | SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised r...展开 SILCOLEASE EMULSION RCA 954 is a non ionic aqueous emulsion. It is used as a tight release additive in emulsion paper coating applications and serves to increase the peeling force required to separate the pressure sensitive adhesive from the siliconised release liner. This RCA emulsion is used as a RCA in polyaddition type emulsions in the SILCOLEASE range. 收起 | |
| SILCOLEASE EMULSION 70840 | Elkem Silicones | SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin...展开 SILCOLEASE EMULSION 70840 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates, except papers used for food contact. SILCOLEASE EMULSION 70840 cures by a polycondensation reaction in the presence of an organic tin compound forming an ELASTOMERIC COATING. 收起 | |
| SILCOLEASE EMULSION 902 | Elkem Silicones | SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. ...展开 SILCOLEASE EMULSION 902 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 902 cures by a polyaddition reaction in the presence of an organometallic compound forming an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 907 | Elkem Silicones | SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence o...展开 SILCOLEASE EMULSION 907 is a SILICONE EMULSION and is used as the base polymer in a three part formulation intended for the RELEASE COATING OF PAPERS, and various other substrates. SILCOLEASE EMULSION 907 cures by a polyaddition reaction in the presence of suitable emulsions of crosslinker and an organometallic catalyst, for example (e.g. SILCOLEASE EMULSION XL 969 and SILCOLEASE EMULSION CATA 903) to give an ELASTOMERIC type coating. It may be used to coat substrates that meet “food contact application” requirements. 收起 | |
| SILCOLEASE EMULSION 908 | Elkem Silicones | SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 908 is a SILICONE EMULSION intended for the RELEASE COATING OF PAPERS and various other substrates. SILCOLEASE EMULSION 908 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an ELASTOMERIC COATING. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 912 | Elkem Silicones | SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION...展开 SILCOLEASE EMULSION 912 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 912 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 913 producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 915 | Elkem Silicones | SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. ...展开 SILCOLEASE EMULSION 915 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMULSION 915 cures by a polyaddition reaction in the presence of an organometallic compound forming an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION 925 | Elkem Silicones | SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYS...展开 SILCOLEASE EMUL 925 is a silicone emulsion intended for the release coating of papers and various other substrates. SILCOLEASE EMUL 925 cures by a polyaddition reaction in the presence of an organometallic catalyst, for example SILCOLEASE EMULSION CATALYST 903, producing an elastomeric coating. The release properties of the coatings can be modified as required. 收起 | |
| SILCOLEASE EMULSION CATA 70827 A | Elkem Silicones | SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOL...展开 SILCOLEASE EMULSION CATALYST 70827 A is an organic tin compound emulsion. It is the EMULSION CATALYST of silicone emulsions intended for the RELEASE COATING OF PAPERS and various other substrates, - except for substrates used for food contact -e.g. SILCOLEASE EMULSION 70840. It only catalyses polycondensation type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 903 | Elkem Silicones | SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substr...展开 SILCOLEASE EMULSION CATALYST 903 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an EMULSION CATALYST to be used in conjunction with a silicone emulsion intended for RELEASE COATING OF PAPERS and various substrates, for example SILCOLEASE EMULSION 908. It is recommended uniquely for the catalysis of polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION CATA 909 | Elkem Silicones | SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory releas...展开 SILCOLEASE EMULSION CATA 909 a non-ionic aqueous emulsion of polymethylsiloxane grafted with reactive chemicals with the addition of a Platinum salt. It is used as an emulsion catalyst for the range of SILCOLEASE EMULSIONS to obtain a non-migratory release coating for flexible substrates such as papers and films. 收起 | |
| SILCOLEASE EMULSION CATA 911 | Elkem Silicones | SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates...展开 SILCOLEASE EMULSION CATA 911 is an emulsion of reactive silicone polymers combined with an organometallic catalyst. It is an emulsion catalyst to be used in conjunction with a silicone emulsion intended for release coating of papers and various substrates, for example SILCOLEASE EMULSION 915. It only catalyses polyaddition type reactions. 收起 | |
| SILCOLEASE EMULSION XL 966 | Elkem Silicones | SILCOLEASE EMULSION CROSSLINKER 966 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 968 | Elkem Silicones | SILCOLEASE EMULSION XL 968 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE EMULSION XL 969 | Elkem Silicones | SILCOLEASE EMULSION XL 969 is a silicone emulsion that can be used as a CROSSLINKER for polyaddition and polycondensation emulsions in the SILCOLEASE range. | |
| SILCOLEASE HA 1 | Elkem Silicones | SILCOLEASE HA-1 is a water-based additive. It is used with emulsion. SILCOLEASE polyaddition or polycondensation release systems to improve hold-out of the silicone. | |
| SILCOLEASE MRA 385 | Elkem Silicones | SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower do...展开 SILCOLEASE MRA 385 is a 2nd generation mist reducing additive used with solventless SILCOLEASE polyaddition release systems processed at high running speeds. Based on branched silicone polymer technology, SILCOLEASE MRA 385 is effective at much lower doses than 1st generation mist reducing products at line speeds up to 1600 m/min. Typical addition levels from 2% to 6% are sufficient for most applications up to about 1000 m/min. 收起 | |
| SILCOLEASE PC-105NXL | Elkem Silicones | SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an e...展开 SILCOLEASE PC-105NXL is a thermally curable silicone emulsion which provides an easy release surface for adhesives and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. SILCOLEASE PC-105NXL is an emulsion of a low vinyl content silicone fluid but without the methyl hydrogen siloxane crosslinker pre-added. As such, SILCOLEASE PC-105NXL offers the flexibility to the formulator of being able to modify the type or the amount of crosslinker to achieve special performance characteristics. A platinum catalyst emulsion is also required. Release modifier emulsions are available which, when blended with SILCOLEASE PC-105NXL in incrementally higher levels, will give correspondingly tighter release force performance. A platinum catalyst emulsion is also required. 收起 | |
| SILCOLEASE PC-107 | Elkem Silicones | SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are a...展开 SILCOLEASE PC-107 is a thermally curable silicone emulsion which provides a premium release surface for adhesive and other tacky materials such as pressure sensitive tapes, labels, asphalt shingle wrap, and food packaging. Release modifier emulsions are available which, when blended with SILCOLEASEPC-107 in incrementally higher levels, will give correspondingly tighter release force performance. SILCOLEASE PC-107 NXL is identical in composition to SILCOLEASEPC-107 but without methyl hydrogen crosslinker. As such, SILCOLEASEPC-107 NXL offers the flexibility to the formulator to modify the type and / or the amount of crosslinker to achieve specific performance characteristics. A platinum catalyst emulsion is required for each. 收起 |
