| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| Hakuenka® CC-R | Shiraishi-Omya GmbH | Hakuenka® CC-R is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CC-R is used to modify and control the rheology of sealants and adhesives based on polyurethane, silicone, hybrid...展开 Hakuenka® CC-R is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CC-R is used to modify and control the rheology of sealants and adhesives based on polyurethane, silicone, hybrid polymers, polysulfide and butyl as well as in PVC or acrylic plastisols. Hakuenka® CC-R improves sag and slump resistance and renders reinforcing properties. Hakuenka® CC-R is also used in printing inks, rubber and plastics applications. 收起 | |
| Hakuenka® CCR-S | Shiraishi-Omya GmbH | Hakuenka® CCR-S is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S is used to modify and control the rheology of sealants and adhesives based on polyurethane, silicone and hyb...展开 Hakuenka® CCR-S is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S is used to modify and control the rheology of sealants and adhesives based on polyurethane, silicone and hybrid polymers. Hakuenka® CCR-S improves sag and slump resistance and renders reinforcing properties. Hakuenka® CCR-S has heat stability as well. 收起 | |
| Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...展开 Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. 收起 | |
| Hakuenka® O | Shiraishi-Omya GmbH | Hakuenka® O is a superior ultra-fine calcium carbonate coated with organic compound. Hakuenka® O has 30nm uniformed ultra-fine particles as the primary particle. These particles are surface treated with rosin acid in order to provide compatible surface mo...展开 Hakuenka® O is a superior ultra-fine calcium carbonate coated with organic compound. Hakuenka® O has 30nm uniformed ultra-fine particles as the primary particle. These particles are surface treated with rosin acid in order to provide compatible surface modification when it is mixed with organic materials or with a vehicle component. Hakuenka® O is mainly used for ink application as an extender pigment for better transparency and gloss. Hakuenka® O is also applied in the rubber industry. The rubber compounds with Hakuenka® O shows better tensile strength, tear strength and flex resistance. 收起 | |
| Hakuenka® T-DD | Shiraishi-Omya GmbH | Hakuenka® T-DD is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Haku...展开 Hakuenka® T-DD is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with vehicle or diluents. Hakuenka® T-DD is applied for both ink and paint applications. Hakuenka® T-DD is commonly applied to off-set printing ink and gravure ink for better transparency. 收起 | |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| HIKOREZ A-1100S | Kolon | HIKOREZ A-1100S is a pale yellow thermoplastic resin which is primarily used as tackifier for pressure sensitive adhesives. | |
| HIKOREZ A-1115 | Kolon | HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ A-2115 | Kolon | HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ C-1100 | Kolon | HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...展开 HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. 收起 | |
| HIKOREZ H-2100 | Kolon | HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2130 | Kolon | HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...展开 HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 收起 | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...展开 HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...展开 HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 收起 | |
| HIKOREZ R-1095 | Kolon | HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking. | |
| HIKOREZ R-1100S | Kolon | HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking. | |
| HIKOREZ T-1080 | Kolon | HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...展开 HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 收起 | |
| HIKOREZ T-3100 | Kolon | HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives. | |
| HIKOTACK DP-100 | Kolon | HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives. | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...展开 HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120H | Kolon | HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives. | |
| HIKOTACK P-120HS | Kolon | HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asp...展开 HIKOTACK P-120HS is pale yellow thermoplastic resin. HIKOTACK P-120HS has a relatively higher softening point than HIKOTACK P-120, and is mainly used as a vehicle for paint and ink products, water repellent agents, concrete curing agent and binder for asphalt. 收起 | |
| HIKOTACK P-120P | Kolon | HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives. | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| HIKOTACK P-140 | Kolon | HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-140 is pale yellow thermoplastic resin which is primarily used as a vehicle for printing ink. HIKOTACK P-140 is compatible with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. HIKOTACK P-140 can also be used as binder for color asphalt and tackifier for EVA based hot melt adhesives. 收起 | |
| HIKOTACK P-150 | Kolon | HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and inc...展开 HIKOTACK P-150 is pale yellow thermoplastic resin which is primarily used as a vehicle for ink. HIKOTACK P-150 is compatible with rosin modified phenolic resin, which means it can be used with phenolic resin in off-set ink to decrease the set time and increase the gloss. 收起 | |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90I | Kolon | HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...展开 HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 收起 | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK(CIR) C-120 | Kolon | HIKOTACK(CIR) C-120 is a kind of thermoplastic aromatic resin which is used as vehicle for paint varnish and various types of ink. | |
| HIKOTACK(CIR) C-90 | Kolon | HIKOTACK(CIR) C-90 is a kind of thermoplastic aromatic resin, which is produced through the polymerization of ingredients such as Styrene, Coumarone and Indenet. HIKOTACK(CIR) C-90 is mainly used in the rubber industry. | |
| Homocal G-50 | Shiraishi-Omya GmbH | Homocal G-50 is a white powder with cubic shaped particles. It has a fatty acid surface coating agent, a pH of 9.0, and a BET specifc surface area (m2/g) of 24.0. It is used in printing inks and other applications. | |
| Homocal-D | Shiraishi-Omya GmbH | Homocal-D is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with the vehicle or diluents. Homoc...展开 Homocal-D is an ultra-fine calcium carbonate which has 80 nm of particles as the primary particle. These particles are surface coated with rosin acids in order to provide compatible surface modification when it is mixed with the vehicle or diluents. Homocal-D is commonly applied to paint applications where high concentrate formulation is required. Homocal-D contributes to improve the brushing feature of the paint, it also contributes to create a glossy but smooth paint surface. Homocal-D , in the blend use with TiO2, contributes to improve water resistance, better antialkaline and anti-gasoline properties. 收起 | |
| ORGASOL® 1002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...展开 ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 1002 ES5 NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...展开 ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2001 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 2001 UD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. 收起 | |
| ORGASOL® 2001 UD NAT 2 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 2002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. 收起 | |
| ORGASOL® 2002 ES4 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. 收起 | |
| ORGASOL® 2002 ES5 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2002 ES6 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. 收起 | |
| ORGASOL® 2002 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 3501 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...展开 ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 3502 D NAT 1 | Arkema 阿科玛 | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...展开 ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. 收起 | |
| RILSAN® D30 NAT | Arkema 阿科玛 | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. 收起 | |
| RILSAN® D40 NAT | Arkema 阿科玛 | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. 收起 | |
| RILSAN® D50 NAT | Arkema 阿科玛 | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. 收起 | |
| RILSAN® D60 NAT | Arkema 阿科玛 | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...展开 RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. 收起 | |
| RILSAN® D80 NAT | Arkema 阿科玛 | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...展开 RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. 收起 | |
| Sodium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Sodium Stearate is a white powder that has a sodium content of 7.5%. This product is often used in paints, coatings and inks. | |
| Viscoexcel-30 | Shiraishi-Omya GmbH | Viscoexcel-30 is a ultra-fine calcium carbonate which has 30 nm of particle size. These particles are surface coated with fatty acid to improve dispersion property at the time of mixing. Viscoexcel-30 is developed and designed as a calcium type rheologica...展开 Viscoexcel-30 is a ultra-fine calcium carbonate which has 30 nm of particle size. These particles are surface coated with fatty acid to improve dispersion property at the time of mixing. Viscoexcel-30 is developed and designed as a calcium type rheological modifier. Viscoexcel-30 provides high viscosity and high thixotropic property, the same as fumed silica or organic agents. Viscoexcel-30 provides better a rheological property both at low and high shear area, it also provides better workability at high shear areas. 收起 | |
| Viscolite-OS | Shiraishi-Omya GmbH | Viscolite-OS was designed in order to improve rheological property for both construction sealants and PVC sol for automobiles. It has 80nm ultra-fine particles, similar to Hakuenka CCR. Viscolite-OS is specially recommended for Modified silicone sealant, ...展开 Viscolite-OS was designed in order to improve rheological property for both construction sealants and PVC sol for automobiles. It has 80nm ultra-fine particles, similar to Hakuenka CCR. Viscolite-OS is specially recommended for Modified silicone sealant, PVC sol & Acrylic sol where they require easy dispersion and excellent thixotropic property in paste sol. Viscolite-OS can be applied as substitute for fumed silica because easy dispersion and excellent thixotropic property in paste sol are the nature of fumed silica. 收起 |
