| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...展开 CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. 收起 | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...展开 CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). 收起 | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...展开 CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. 收起 | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...展开 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. 收起 | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...展开 CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. 收起 | |
| CV-1161 | NuSil Silicone Technology 1 | CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...展开 CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. 收起 | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...展开 CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. 收起 | |
| CV-2500 | NuSil Silicone Technology 1 | CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar ...展开 CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar cell arrays where clarity and low volatility is needed. 收起 | |
| CV-2566 | NuSil Silicone Technology 1 | CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electroni...展开 CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electronic applications, it can be utilized as a sealant or adhesive to help control high vacuum environments. 收起 | |
| CV-2567 | NuSil Silicone Technology 1 | CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used a...展开 CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used as an adhesive or sealant for electronic and space applications. 收起 | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...展开 CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. 收起 | |
| CV-2900 | NuSil Silicone Technology 1 | CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part...展开 CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part material. It can also be utilized as an adhesive , caulking or potting material in electronics/space applications that require minimal outgassing and provides protection from condensation in sensitive devices. 收起 | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...展开 CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. 收起 | |
| CV2-1142 | NuSil Silicone Technology 1 | CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bond...展开 CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bonding in applications such as overhead or vertical joints that require a non-slumping, one-part material. It can also be utilized as a sealant, caulking, adhesive or potting material in space and electrical applications that require minimal outgassing. 收起 | |
| CV2-1161 | NuSil Silicone Technology 1 | CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal...展开 CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal for bonding and adhering silicone elastomers, paper, metals, glass, fabric, films, and some synthetics. It can also be used for applications that require low outgassing and minimal volatile condensable materials. 收起 | |
| CV3-2500 | NuSil Silicone Technology 1 | CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...展开 CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. 收起 | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...展开 CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. 收起 | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...展开 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. 收起 | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...展开 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| Disvacryl-1000 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1000 is a thermoplastic acrylic resin. This product includes xylene as volatile byproducts. It can be used in high-quality air-drying finishes for metal, wood, concrete, and masonry. | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| Disvaket-200 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-200 is a ketonic resin. This product's melting point range is 105-115 degrees Celsius. It can be used in ballpoint inks and in wood lacquers. | |
| Disvalkyd-500 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-500 is an alkyd resin made from long oils. This product derives from linseed oil and has been modified with a glycerine polyol. It can be used in heat-set and gloss printing inks. | |
| Disvalkyd-501 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-501 is an alkyd resin made with long oils. This product derives from linseed oil. It is ideal for use in letterpress, offset, and screen printing inks. | |
| Disvalkyd-502 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-502 is an alkyd resin made with long oils. This product derives from linseed oil. It is ideal for use in letterpress, offset, and screen printing inks. | |
| Disvalkyd-503 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-503 is an alkyd resin made with long oils. This product derives from linseed oil. It can be used in letterpress, offset and screen printing inks. It can also be used in high-gloss enamels. | |
| Disvalkyd-507 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-507 is an alkyd resin made with long oils. This product is made with linseed oil. It can be used in letterpress, offset, and screen inks. | |
| Disvalkyd-552 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-552 is an alkyd resin made with medium-length oils. This product is made with linseed oils and glycerine or penta polyols. It can be used in industrial or decorative paints and undercoatings. | |
| Disvalkyd-555 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-555 is an alkyd resin made with medium-length oils. This product derives from soybean oil. It can be used in decorative enamels and roller-coated enamels or varnishes that have good colour and colour retention. | |
| Disvalkyd-563 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-563 is an alkyd resin made with long oils. This product derives from soybean oil. It can be used in white thermoplastic inks that require multiple stoving processes. | |
| Disvamide-603 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-603 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-605 HV | D.S.V. Chemicals Pvt. Ltd. | Disvamide-605 HV is a non-reactive polyamide resin. This product is soluble in co-solvents. It can be used in flexo and gravure inks for treated polythene and polypropylene films. | |
| Disvamide-610 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-610 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polythene and polyethylene. | |
| Disvamide-611 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-611 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polyethylene and polypropylene. | |
| Disvamide-615 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-615 is a reactive polyamide resin. This product appears as a highly viscous liquid. It can be used in general-purpose epoxy polyamide coatings that provide excellent resistance, as well as in epoxy adhesives. | |
| Disvamide-625 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-625 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. | |
| Disvamide-640 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-640 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. | |
| Disvamine-701 | D.S.V. Chemicals Pvt. Ltd. | Disvamine-701 is a butylated amino resin. This product is a melamine formaldehyde resin. It can be used in highly-reactive curing agents for stoving paints, roller coatings, and foil inks. It can also be used in mar-proof varnishes and acid-catalyzed w...展开 Disvamine-701 is a butylated amino resin. This product is a melamine formaldehyde resin. It can be used in highly-reactive curing agents for stoving paints, roller coatings, and foil inks. It can also be used in mar-proof varnishes and acid-catalyzed wood finishes. 收起 | |
| Disvester-850 | D.S.V. Chemicals Pvt. Ltd. | Disvester-850 is an esterified epoxy resin. This product derives from mixed-length oils. It can be used in automotive primers, chemically resistant coatings, air-drying and stoving paints, and metallic decoration varnishes. | |
| Disvester-890 | D.S.V. Chemicals Pvt. Ltd. | Disvester-890 is a polyester resin. This product has not been created using any oil derivatives. It can be used in high-quality coil coatings and metallic decorative coatings. | |
| Disvester-891 | D.S.V. Chemicals Pvt. Ltd. | Disvester-891 is a polyester resin. This product has not been created with any oil derivatives. It can be used in high-quality coil coatings and metallic decorative coatings. | |
| Disvimol-101 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss i...展开 Disvimol-101 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and is compatible with alkyds. It is used in high gloss synthetic enamels. It can also be used in general inks, letterpress inks, and offset gloss inks. 收起 | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| Disvimol-106 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-106 is a rosin derivative that has been modified with maleic acid. This product is soluble in mineral spirits. It can be used in picture varnishes, ballpoint pen inks, and liquid inks. | |
| Disvipol-201 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-201 is a rosin derivative that has been modified with a phenolic compound. This product is scratchproof and has better solvent release. It can be used in letterpress inks, offset inks, and liquid inks. | |
| Disvipol-205 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-205 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss. It can be used in letterpress inks, offset inks, and gravure printing inks. | |
| Disvipol-207 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-207 is a rosin derivative. This product has been modified with phenolic compounds and offers high gloss in the final result. It can be used in web offset and quickset inks. | |
| Disvipol-209 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-209 is a rosin derivative that has been modified with a phenolic compound. This product has good solubility in aliphatic hydrocarbon solvents. It can be used in high quality quickset or sheet-fed inks. | |
| Disvipol-251 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-251 is a phenolic resin with high purity. This product is soluble in Novolac. It can be used in flexogravure inks, spirit varnishes, aniline inks, anti-corrosion lacquers, and traffic paints. | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| Disvipol-271 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels. | |
| EPM-2420 | NuSil Silicone Technology 1 | EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and ...展开 EPM-2420 is a general purpose silicone adhesive that has a low volatility and a 1:1 Mix Ratio (Part A: Part B). The primary function of this adhesive is to protect electric components and assemblies against vibration, shock, dust, moisture, chemicals and other hazards. It is also ideal for applications where a low viscosity and clarity are important. 收起 | |
| EPM-2890 | NuSil Silicone Technology 1 | EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product ...展开 EPM-2890 is a one part, white, silicone adhesive that is thermally conductive and non corrosive. It has the ability to operate on a wide temperature range and provide moderate heat transfer between electrical components and their heat sinks. This product can also function as a caulking, sealing, potting or adhesive material in electronics applications that require minimal outgassing to prevent condensation from building in sensitive devices. 收起 | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Estergum-752 | D.S.V. Chemicals Pvt. Ltd. | Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...展开 Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. 收起 | |
| FS-3730-2 | NuSil Silicone Technology 1 | FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sea...展开 FS-3730-2 is a black adhesive/sealant that is based on a fluorosilicone polymer with 100 mole % fluorosilicone. It can be utilized to bond or protect hardware components that are exposed to aviation fuels or gasoline. This product can also be used for sealing or bonding applications requiring fuel and/or solvent resistance. Another strong property is that it bonds aggressively to most surfaces. 收起 | |
| FS1-3730 | NuSil Silicone Technology 1 | FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond ...展开 FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond aggressively to most surfaces. 收起 | |
| FS3-3730 | NuSil Silicone Technology 1 | FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistan...展开 FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistance. It can also be used for protecting or bonding hardware components that have been exposed to gasoline or aviation fuels. 收起 | |
| GH-AS-C2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibil...展开 GH-AS-C2, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-F | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high ...展开 GH-AS-C2-F, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-C2-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with ...展开 GH-AS-C2-Q, in the form of a clear yellow solution, is acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good solvent release, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-D | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-D, in the form of a clear sticky solution, is a polyurethane modified acrylic resin. It is applicable to the production of alcohol and water-soluble gravure printing ink for extrusion lamination with environmental protection. | |
| GH-AS-SY-X | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-SY-X, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a higher dilution ratio than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibilit...展开 GH-AS-W, in the form of a clear sticky solution, is a general type acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W-Q | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, wi...展开 GH-AS-W-Q, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than GH-AS-W and has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-AS-W2A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high c...展开 GH-AS-W2A, in the form of a clear sticky solution, is acrylic resin for white printing ink that has suitable solvents in alcohol, esters, and alcohol-water. It has a better solvent release than the other GH-AS-W products and has good print-ability, high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibil...展开 GH-ASJ, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJ-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability,...展开 GH-ASJ-2, in the form of a clear yellow solution, is a general type polyurethane modified acrylic resin for white and color reverse-printing inks that has suitable solvents in alcohol, esters, and alcohol-water. It has good dispersion, good print-ability, and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-ASJB-4 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product h...展开 GH-ASJB-4, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has low viscosity (700 to 1200 mPas), no dispersing agent needed, and good print-ability. 收起 | |
| GH-ASJB-4Y | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product ...展开 GH-ASJB-4Y, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJB-4Y-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This produc...展开 GH-ASJB-4Y-2, in the form of a clear yellow solution, is a modified acrylic resin that is applicable to the production of green environmental protection and high printing suitable alcohol or alcohol-water-soluble gravure surface-printing inks. This product has high viscosity (2000 to 4000 mPas), a dispersing agent is needed, and has good print-ability. 收起 | |
| GH-ASJG-A | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitabl...展开 GH-ASJG-A, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of 1500 to 3000 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-ASJG-B | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitab...展开 GH-ASJG-B, in the form of a clear solution, is a ketone and benzene free environment-friendly two-component glazing oil resin. It has a viscosity of less than 100 mPas at 25°C and when using esters as the solvent, it is a coating adhesive and resin suitable for PET, PVC, BOPP, PE, VMPET, aluminum film, paper, etc. 收起 | |
| GH-OH-1015 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1015, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1500 to 3000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-1503 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-1503, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-2607 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-2607, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5500 to 7500 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-3005 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-3005, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 1000 to 2000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-OH-4007 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermedi...展开 GH-OH-4007, in the form of a clear colorless to pale yellow sticky solution, is a green environmental protection hydroxyl acrylic resin. It has a viscosity of 5000 to 7000 mPas, is quick drying, good adhesive strength, gloss, and is suitable for intermediate and top coatings of metal and plastics, and primer. 收起 | |
| GH-PU-1 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-1, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-2 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-2, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-PU-3 | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated ...展开 GH-PU-3, in the form of a clear sticky solution, is an environment-friendly polyurethane resin that does not contain benzene, toluene, and ketone. It has good print-ability and high compatibility, with high overprint of compatibility with the chlorinated polyurethane and polypropylene lamination printing inks. 收起 | |
| GH-WPU | SICHUAN GUOHE NEW MATERIALS CO., LTD. | GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing g...展开 GH-WPU, in the form of a white emulsion, is a green environmental protection type of waterborne polyurethane resin emulsion. It has a suitable solvent in water and alcohol and is suitable for printing glue and for preparation of clear and white printing glue. 收起 | |
| Picassian® AC-111 | Stahl Polymers | Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance ...展开 Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance properties, and low water absorption properties. 收起 | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起 | |
| Picassian® AC-222 | Stahl Polymers | Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This pro...展开 Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This product has good pigment wetting attributes, high pigment loading capacity attributes, is quick to sand, and is quick to dry. 收起 | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...展开 Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. 收起 | |
| Picassian® AC-295 | Stahl Polymers | Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...展开 Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. 收起 | |
| Picassian® PU-508 | Stahl Polymers | Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility ...展开 Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility properties, has good heat seal resistance properties, and has good adhesion on aluminium foil. 收起 | |
| Picassian® PU-518 | Stahl Polymers | Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on alum...展开 Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on aluminium foil, is soluble in alcohol rich mixtures, and is fully compatible with alcohol soluble nitrocellulose. 收起 | |
| Picassian® PU-546 | Stahl Polymers | Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol ri...展开 Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol rich mixtures, and has solvent retention values that are lower than those of conventional inks. 收起 | |
| Picassian® PU-548 | Stahl Polymers | Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble res...展开 Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble resins, and is very resistant to oils, water, and fats. 收起 | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...展开 Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. 收起 | |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...展开 Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. 收起 | |
| Picassian® PU-635 | Stahl Polymers | Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility prop...展开 Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility properties, is crosslinkable at room temperature, and is highly compatible with other binders. 收起 | |
| Picassian® PU-648 | Stahl Polymers | Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good co...展开 Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good coverage properties, good filling properties, and maintains flexibility at negative 30 degrees Celsius. 收起 | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...展开 PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. 收起 | |
| R-1008-0 | NuSil Silicone Technology 1 | R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating mus...展开 R-1008-0 is a translucent, one part, flowable silicone elastomer dispersion that cures in 7 days at room temperature when exposed to atmospheric moisture. It can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F). 收起 | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. 收起 | |
| R-1008-2 | NuSil Silicone Technology 1 | R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...展开 R-1008-2 is a black RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion, and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used on silicone rubber parts as a marking ink where the coating must maintain long term stability. 收起 |
