| ANCAMINE® 2719 | Evonik Operations GmbH, BL Coating & Adhesive Resins | ANCAMINE® 2719 curing agent is a nonyl- and p-tert-butyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin. It is of low viscosity and highly reactive at low temperatures ~5°C. Ancamine 2719 will react with...展开 ANCAMINE® 2719 curing agent is a nonyl- and p-tert-butyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin. It is of low viscosity and highly reactive at low temperatures ~5°C. Ancamine 2719 will react with liquid epoxy resins at low temperature to produce a highly chemical resistant surface coating. 收起 | Request Sample |
| Barium Stearate | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Barium Stearate is a white powder that has a barium content of 20%. This product is often used as a flatting and sanding agent in lacquers, coatings and inks. | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...展开 DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...展开 DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...展开 DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. 收起 | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. 收起 | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...展开 DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. 收起 | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...展开 DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. 收起 | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...展开 DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...展开 DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. 收起 | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...展开 DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...展开 DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| Densil® ZOD | Arxada – Troy Corporation | Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-solubl...展开 Densil® ZOD is a three-active blend biocide formulated to offer dry-film coating protection in humid environments. Densil® ZOD offers controlled-leaching and low water solubility properties of Zinc Omadine® Antimicrobials, complemented with a water-soluble fungicide. Densil® ZOD also contains a supplemental algaecide for complete dry-film protection of the coating. 收起 | |
| Fungitrol® 11E | Arxada – Troy Corporation | Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne ...展开 Fungitrol® 11E is a powdered, non-metallic organic microbiocide for use in solvent-based paints, stains, plastics, compounds, and wood/plastic composites. It is highly effective against a variety of microorganisms and is suitable for use in solvent-borne exterior paints and stains. 收起 | |
| Fungitrol™ 400G | Arxada – Troy Corporation | Fungitrol ™ 400G是100％活性IPBC，是自由流动的颗粒形式。它是一种高效的广谱杀菌剂。此产品已于各种应用中广泛使用了很多年，可防止由真菌，霉菌和霉菌引起的损毁和变质。 | |
| Fungitrol® 404-DS | Arxada – Troy Corporation | Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds,...展开 Fungitrol® 404-DS is a broad-spectrum microbicide for the control of mildew and fungi. It provides excellent performance characteristics when used as a fungicide/mildewcide in aqueous paints, coatings, adhesives, caulks, sealants, grouts, joint compounds, and wood preservative stains. 收起 | |
| Fungitrol® 720 | Arxada – Troy Corporation | Fungitrol® 720 is a fungicide that offers broad-spectrum protection against degradation, discoloration, and defacement caused by mold, mildew, and algae. | |
| Fungitrol™ DP2 | Arxada – Troy Corporation | Fungitrol™ DP2 is a unique wet-state and dry-film preservative in one product. Fungitrol™ DP2 is a highly effective growth inhibitor of fungal and bacterial organisms providing long-term protection of paints in the wet state and the coated surfaces. | |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| MERGAL® 128 | Arxada – Troy Corporation | MERGAL® 128 is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. | |
| MERGAL® 174II | Arxada – Troy Corporation | MERGAL® 174II is a liquid preservative used for the protection of water-based products against microbial spoilage in the wet state. The preservative is applicable at high pH and is compatible in many different systems. | |
| MERGAL® 174IIP | Arxada – Troy Corporation | MERGAL® 174IIP is free-flowing, powdered, organic wet-state preservative designed for use in aqueous products which are subject to bacterial deterioration. | |
| MERGAL® 186 | Arxada – Troy Corporation | MERGAL® 186 is a liquid, water-soluble organic preservative, designed for use in aqueous based systems that are subject to bacterial deterioration. | |
| MERGAL® 395 | Arxada – Troy Corporation | 基于乙内酰脲的水溶性杀菌剂。该产品在宽泛的pH值范围（3-10）内和较高的温度下具有出色的稳定性。 | |
| MERGAL® 530 | Arxada – Troy Corporation | MERGAL® 530 is a broad-spectrum, quick-kill, fast-dissipating biocide that carries a low environmental impact. The non-oxidizing yet extremely rapid biocidal mechanism of this product makes it ideally suited for a wide variety of industrial applications. | |
| MERGAL® 530A | Arxada – Troy Corporation | MERGAL® 530A is a broad-spectrum and quick action preservative with low environmental impact. MERGAL® 530A provides a rapid antimicrobial mechanism, making it ideally suited for a wide variety of industrial applications. MERGAL® 530A is...展开 MERGAL® 530A is a broad-spectrum and quick action preservative with low environmental impact. MERGAL® 530A provides a rapid antimicrobial mechanism, making it ideally suited for a wide variety of industrial applications. MERGAL® 530A is based on DBNPA, and is compatible with other water treatment chemicals such as organic biocides, chlorine and chlorine releasers, dispersants, surfactants, thickeners, corrosion inhibitors, etc. MERGAL® 530A does not contain formaldehyde or components which could split off formaldehyde. 收起 | |
| MERGAL® 711K6 | Arxada – Troy Corporation | 一种用于水性体系的广谱型罐装防腐剂。由于其效力均衡的配方，适用于潮湿的地区以及顶空防护。 | |
| MERGAL® 753 | Arxada – Troy Corporation | MERGAL® 753 is a formaldehyde-free broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in water-based systems. MERGAL® 753 is a highly concentrated, free-flowing dispersion. The product is free of formal...展开 MERGAL® 753 is a formaldehyde-free broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in water-based systems. MERGAL® 753 is a highly concentrated, free-flowing dispersion. The product is free of formaldehyde and VOC, ensure lower environmental impact & favourable GHS labeling. 收起 | |
| MERGAL® 758 | Arxada – Troy Corporation | MERGAL® 758 is an aqueous broad-spectrum in-can preservative used to prevent deterioration and degradation caused by bacteria, fungi and yeast in aqueous systems. Is a free-flowing, VOC-free and formaldehyde-free dispersion product. Combines fast-acting p...展开 MERGAL® 758 is an aqueous broad-spectrum in-can preservative used to prevent deterioration and degradation caused by bacteria, fungi and yeast in aqueous systems. Is a free-flowing, VOC-free and formaldehyde-free dispersion product. Combines fast-acting properties with long lasting protection. Designed specifically for the protection of paints and plasters or other aqueous systems where contamination is unpredictable, yet formaldehyde is not allowed. Also ideal for applications where a non-alkaline wet-state preservative is desired. 收起 | |
| MERGAL® 786 | Arxada – Troy Corporation | MERGAL® 786 is a broad-spectrum wet-state preservative used to protect against deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. MERGAL® 786 is a highly concentrated, ecologically responsible formulation. It is a free-f...展开 MERGAL® 786 is a broad-spectrum wet-state preservative used to protect against deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. MERGAL® 786 is a highly concentrated, ecologically responsible formulation. It is a free-flowing, aqueous, VOC-free dispersion product. 收起 | |
| MERGAL® BIT 20 | Arxada – Troy Corporation | MERGAL® BIT 20 is an effective broad-spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria, yeast, and fungi in aqueous based formulations. | |
| MERGAL® BIT20W | Arxada – Troy Corporation | MERGAL® BIT20W is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. It is a highly concentrated, free-flowing, aqueous, VOC-free dispersion product. | |
| MERGAL® CM 1.5 | Arxada – Troy Corporation | MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra f...展开 MERGAL® CM 1.5 is a liquid microbiocide for use in various waterborne end-use products, including adhesives, air washer systems, building materials, brewery pasteurizers, can warmer systems, concrete admixtures, conveyor lubricants, emulsions, and ultra filtrations units. It is suitable for systems with a pH of 3 - 9. 收起 | |
| Mergal® GLT25 | Arxada – Troy Corporation | Mergal® GLT25 is a liquid preservative for the control of bacteria and fungi. The product is used in a wide variety of water-based applications. | |
| Mergal® GLT50 | Arxada – Troy Corporation | Mergal® GLT50 is a liquid preservative that exhibits broad spectrum efficacy against bacteria and fungi. It is a highly concentrated product for use in a wide variety of water-based applications. The low use rates qualify Mergal® GLT50 as an ecologically ...展开 Mergal® GLT50 is a liquid preservative that exhibits broad spectrum efficacy against bacteria and fungi. It is a highly concentrated product for use in a wide variety of water-based applications. The low use rates qualify Mergal® GLT50 as an ecologically responsible product technology ("green"). This product can be use in aqueous or water-containing products and systems, including industrial, institutional, and consumer in-can processes and products. 收起 | |
| MERGAL® K10N | Arxada – Troy Corporation | MERGAL® K10N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. MERGAL® K10N provides long-term wet-state (in-can) preservation. The product offer exc...展开 MERGAL® K10N is an industrial BIT ( 1,2-benzisothiazoline-3-one) based preservative used to prevent deterioration and degradation caused by bacteria in aqueous systems. MERGAL® K10N provides long-term wet-state (in-can) preservation. The product offer excellent stability and compatibility even with difficult formulations/systems. 收起 | |
| MERGAL® K12N | Arxada – Troy Corporation | MERGAL® K12N is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. The product is effective when used as a disinfectant or sanitizer for plants and equipment. | |
| MERGAL® K14 | Arxada – Troy Corporation | MERGAL® K14 is an effective, broad-spectrum liquid preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. | |
| MERGAL® K14G | Arxada – Troy Corporation | MERGAL® K14G is a 'green' product effective at preserving aquoeus systems and functional fluids. MERGAL® K14G is a broad-spectrum and fast-acting preservatve designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. | |
| MERGAL® K20 | Arxada – Troy Corporation | MERGAL® K20 is a broad spectrum liquid preservative designed to inhibit the growth of micro-organisms such as bacteria, yeasts, and fungi in aqueous based formulations. | |
| MERGAL® K31G | Arxada – Troy Corporation | MERGAL® K31G is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K31G does not contain formaldehyde or components wh...展开 MERGAL® K31G is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K31G does not contain formaldehyde or components which could split off formaldehyde or volatile organic compounds. 收起 | |
| MERGAL® K32J | Arxada – Troy Corporation | MERGAL® K32J is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K32J does not contain formaldehyde or components wh...展开 MERGAL® K32J is a broad-spectrum preservative used to prevent microbial deterioration caused by bacteria, fungi and yeast in 'green' water-based systems. The product is a free-flowing dispersion. MERGAL® K32J does not contain formaldehyde or components which could split off formaldehyde or volatile organic compounds. 收起 | |
| MERGAL® K6N | Arxada – Troy Corporation | 一种用于水性体系的广谱型罐装防腐剂。由于其效力均衡的配方，适用于潮湿的地区以及气相防护。 | |
| MERGAL® K9N | Arxada – Troy Corporation | MERGAL® K9N is an effective wet-state preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. MERGAL® K9N provides stable & broad-spectrum liquid preservative at cost-effective use levels. | |
| MERGAL® KM200 | Arxada – Troy Corporation | MERGAL® KM200 is an effective in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria. Is fast acting and provides head space protection. | |
| MERGAL® KMP | Arxada – Troy Corporation | MERGAL® KMP is a liquid wet-state preservative used for the protection of water-based products against microbial spoilage. The product is effective against all gram negative and gram positive bacteria, which are central to the spoilage of water-based indu...展开 MERGAL® KMP is a liquid wet-state preservative used for the protection of water-based products against microbial spoilage. The product is effective against all gram negative and gram positive bacteria, which are central to the spoilage of water-based industrial goods and industrial systems. 收起 | |
| MERGAL® MV1.5 | Arxada – Troy Corporation | MERGAL® MV1.5 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. It is a highly concentrated, free-flowing, aqueous, VOC-free dispersion product. | |
| MERGAL® V615 | Arxada – Troy Corporation | O-缩甲醛化合物，主要用于罐内防护。 | |
| MERGAL® V698K4 | Arxada – Troy Corporation | 一种用于所有类型水性体系的防腐剂，大范围抑制细菌、酵母菌和霉菌的活动。 | |
| MERGAL® V698K5 | Arxada – Troy Corporation | MERGAL® V698K5 is a broad-spectrum wet-state preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. | |
| MERGAL® V698K6 | Arxada – Troy Corporation | MERGAL® V698K6 is a broad-spectrum wet-state preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast . | |
| MERGAL® WP45 | Arxada – Troy Corporation | MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, i...展开 MERGAL® WP45 is an effective preservative against a wide variety of fungal orgamisms (yeast, molt, staining fungi and mildew) and also contributes to limited control of bacteria. The primary application is protection of surface exposed to fungal spores, in water- or solvent- based produts. MERGAL® WP45 can be used to protect against fungal growth on technical materials in both interior and exterior applcations. 收起 | |
| Nuosept® 44 | Arxada – Troy Corporation | Nuosept® 44 is derived from glycine. It is fast acting, easy to use and handle, and cost competitive. | |
| NUOSEPT® 491 | Arxada – Troy Corporation | NUOSEPT® 491 is a formaldehyde-free, pH-stable liquid preservative designed to inhibit the growth of bacteria in aquoeous systems. The product ig highly stabe and compatiblewith most water-based systems. | |
| NUOSEPT® 95 | Arxada – Troy Corporation | NUOSEPT® 95 is an aqueous solution of organic compounds designed for use as a preservative in water-based products. | |
| NUOSEPT® BM11 | Arxada – Troy Corporation | NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is f...展开 NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® BM21 | Arxada – Troy Corporation | NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is f...展开 NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® BM22 | Arxada – Troy Corporation | NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is f...展开 NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® BM22A | Arxada – Troy Corporation | NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A i...展开 NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A is free of formaldehyde, CIT, VOC and AOX. 收起 | |
| NUOSEPT® M50C | Arxada – Troy Corporation | NUOSEPT® M50C is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® M50C is a highly concentrated, ecologically responsible formulation. NUOSEPT® M50C is free of formaldehy...展开 NUOSEPT® M50C is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® M50C is a highly concentrated, ecologically responsible formulation. NUOSEPT® M50C is free of formaldehyde, CIT, VOC and AOX 收起 | |
| NUOSEPT® MIT10 | Arxada – Troy Corporation | NUOSEPT® MIT10 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® MIT10 is a highly concentrated, ecologically responsible formulation. NUOSEPT® MIT10 is free of formald...展开 NUOSEPT® MIT10 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria. NUOSEPT® MIT10 is a highly concentrated, ecologically responsible formulation. NUOSEPT® MIT10 is free of formaldehyde, CIT, VOC and AOX 收起 | |
| ORGASOL® 1002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...展开 ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 1002 ES5 NAT 1 | Arkema 阿科玛 | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...展开 ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2001 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 2001 UD NAT 1 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. 收起 | |
| ORGASOL® 2001 UD NAT 2 | Arkema 阿科玛 | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 2002 D NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...展开 ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. 收起 | |
| ORGASOL® 2002 ES3 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. 收起 | |
| ORGASOL® 2002 ES4 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. 收起 | |
| ORGASOL® 2002 ES5 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. 收起 | |
| ORGASOL® 2002 ES6 NAT 3 | Arkema 阿科玛 | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...展开 ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. 收起 | |
| ORGASOL® 2002 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...展开 ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). 收起 | |
| ORGASOL® 3501 EXD NAT 1 | Arkema 阿科玛 | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...展开 ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. 收起 | |
| ORGASOL® 3502 D NAT 1 | Arkema 阿科玛 | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...展开 ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. 收起 | |
| Picassian® AC-049 | Stahl Polymers | Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...展开 Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. 收起 | |
| Picassian® AC-111 | Stahl Polymers | Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance ...展开 Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance properties, and low water absorption properties. 收起 | |
| Picassian® AC-122 | Stahl Polymers | Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties...展开 Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties, good scratch resistance, good clarity properties, good gloss properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-126 | Stahl Polymers | Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glo...展开 Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glossy, hard, and transparent films once coalesced. This product has good water resistance, humidity resistance, adhesion, corrosion resistance, blister resistance, and mechanical properties. It also has good compatibility with other binders such as acrylics and polyurethanes. 收起 | |
| Picassian® AC-169 | Stahl Polymers | Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance ...展开 Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance properties, good clarity properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...展开 Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. 收起 | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...展开 Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. 收起 | |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...展开 Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. 收起 | |
| Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...展开 Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. 收起 | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起 | |
| Picassian® AC-222 | Stahl Polymers | Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This pro...展开 Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This product has good pigment wetting attributes, high pigment loading capacity attributes, is quick to sand, and is quick to dry. 收起 | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...展开 Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. 收起 | |
| Picassian® AC-280 | Stahl Polymers | Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...展开 Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. 收起 | |
| Picassian® AC-295 | Stahl Polymers | Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...展开 Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. 收起 | |
| Picassian® PU-508 | Stahl Polymers | Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility ...展开 Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility properties, has good heat seal resistance properties, and has good adhesion on aluminium foil. 收起 | |
| Picassian® PU-518 | Stahl Polymers | Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on alum...展开 Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on aluminium foil, is soluble in alcohol rich mixtures, and is fully compatible with alcohol soluble nitrocellulose. 收起 | |
| Picassian® PU-546 | Stahl Polymers | Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol ri...展开 Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol rich mixtures, and has solvent retention values that are lower than those of conventional inks. 收起 | |
| Picassian® PU-548 | Stahl Polymers | Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble res...展开 Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble resins, and is very resistant to oils, water, and fats. 收起 | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...展开 Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. 收起 | |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...展开 Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. 收起 | |
| Picassian® PU-635 | Stahl Polymers | Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility prop...展开 Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility properties, is crosslinkable at room temperature, and is highly compatible with other binders. 收起 | |
| Picassian® PU-648 | Stahl Polymers | Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good co...展开 Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good coverage properties, good filling properties, and maintains flexibility at negative 30 degrees Celsius. 收起 | |
| Picassian® XL-701 | Stahl Polymers | Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. Th...展开 Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. This product is a yellow, slightly hazy liquid with a solid content of 50 percent. 收起 |
