| Alinco™ M-25 Linseed Oil | ADM | Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finish...展开 Alinco™ M-25 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Q Linseed Oil | ADM | Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Q Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ X Linseed Oil | ADM | Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ X Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Y Linseed Oil | ADM | Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Y Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z Linseed Oil | ADM | Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes,...展开 Alinco™ Z Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-1 Linseed Oil | ADM | Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-1 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-2 Linseed Oil | ADM | Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-2 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-3 Linseed Oil | ADM | Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-4 Linseed Oil | ADM | Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-4 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-5 Linseed Oil | ADM | Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-5 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z-6 Linseed Oil | ADM | Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishe...展开 Alinco™ Z-6 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Alinco™ Z/2-Z/3 Linseed Oil | ADM | Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall fin...展开 Alinco™ Z/2-Z/3 Linseed Oil, in the form of amber clear liquid, is a blend of heat polymerized refined linseed oil. This closed-kettle, heat-bodied oil of medium acid range has applications in enamels, house paints, varnishes, printing inks, flat wall finishes, and more. 收起 | |
| Anti-Spalling Compound | ADM | Anti-Spalling Compound, in the form of a semi viscous to viscous liquid, is a blend of scientific boiled linseed oil and mineral spirits. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Aspanger ASPOLIT F100 | Aspanger | Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...展开 Aspanger ASPOLIT F100, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F100 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F100 has a Spec. surface (m²/g) of 4.5, an a oil absorption (g/100 g) of 21, and a loose bulk density (g/l) of 630. 收起 | |
| Aspanger ASPOLIT F30 | Aspanger | Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...展开 Aspanger ASPOLIT F30, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F30 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F30 has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 400. 收起 | |
| Aspanger ASPOLIT F40 | Aspanger | Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...展开 Aspanger ASPOLIT F40, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F40 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F40 has a Spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 35, and a loose bulk density (g/l) of 450. 收起 | |
| Aspanger ASPOLIT F70 | Aspanger | Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most ...展开 Aspanger ASPOLIT F70, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT F70 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT F70 has a Spec. surface (m²/g) of 6, an a oil absorption (g/100 g) of 27, and a loose bulk density (g/l) of 540. 收起 | |
| Aspanger ASPOLIT G200 | Aspanger | Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...展开 Aspanger ASPOLIT G200, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G200 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G200 has a Spec. surface (m²/g) of 3, an a oil absorption (g/100 g) of 16, and a loose bulk density (g/l) of 740. 收起 | |
| Aspanger ASPOLIT G400 | Aspanger | Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most...展开 Aspanger ASPOLIT G400, a special 2-component filler, consists of the multifunctional industrial minerals quartz and muscovite mica. To guarantee the optimum combination of the best properties of both minerals, special wet and dry processes employ the most modern quality control and production technologies. These inclued low oil absorption, high elasticity, exact classification, extrememly low heavy metals content, and excellent wetting properties. Reduced cracking and shrinkage, weathering-, chemical, increased abrasion-, thermal shock-, UV and IR-resistance, and improved adhesion are properties that qualify Aspanger ASPOLIT G400 as a functional filler. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger ASPOLIT G400 has a spec. surface (m²/g) of 1-2, an a oil absorption (g/100 g) of 12, and a loose bulk density (g/l) of 885. 收起 | |
| Aspanger Mica 900 | Aspanger | Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves ma...展开 Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica 900 has a loose bulk density (g/l) of 350. 收起 | |
| Aspanger Mica F | Aspanger | Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F impro...展开 Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica F has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 34, and a loose bulk density (g/l) of 440. 收起 | |
| Aspanger Mica G | Aspanger | Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G impro...展开 Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica G has a spec. surface (m²/g) of 8, an a oil absorption (g/100 g) of 28, and a loose bulk density (g/l) of 490. 收起 | |
| Aspanger Mica N | Aspanger | Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N impro...展开 Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica N has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 31, and a loose bulk density (g/l) of 460. 收起 | |
| Aspanger Mica SFG20 | Aspanger | Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG2...展开 Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG20 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG20 has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 41, and a loose bulk density (g/l) of 370. 收起 | |
| Aspanger Mica SFG40 | Aspanger | Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...展开 Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG40 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG40 has a spec. surface (m²/g) of 17, an a oil absorption (g/100 g) of 42, and a loose bulk density (g/l) of 290. 收起 | |
| Aspanger Mica SFG70 | Aspanger | Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...展开 Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG70 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG70 has a spec. surface (m²/g) of 21, an a oil absorption (g/100 g) of 43, and a loose bulk density (g/l) of 200. 收起 | |
| Aspanger Mica SG | Aspanger | Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG imp...展开 Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SG has a spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 25, and a loose bulk density (g/l) of 500. 收起 | |
| Aspanger Mica TF | Aspanger | Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves mate...展开 Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TF has a Spec. surface (m²/g) of 9.5, an a oil absorption (g/100 g) of 52, and a loose bulk density (g/l) of 370. 收起 | |
| Aspanger Mica TG | Aspanger | Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves mate...展开 Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TG has a spec. surface (m²/g) of 4.0, an a oil absorption (g/100 g) of 46, and a loose bulk density (g/l) of 350. 收起 | |
| Aspanger Mica TM | Aspanger | Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves mate...展开 Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TM has a spec. surface (m²/g) of 5.5, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 360. 收起 | |
| Aspanger Mica TX | Aspanger | Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves mate...展开 Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TX has a spec. surface (m²/g) of 1.2 and a loose bulk density (g/l) of 320. 收起 | |
| Aspanger Mica TXL | Aspanger | Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves ma...展开 Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TXL has a spec. surface (m²/g) of 3.3 and a loose bulk density (g/l) of 330. 收起 | |
| Bleached Linseed Oil | ADM | Bleached Linseed Oil, in the form of amber clear liquid, is an all-purpose refined, free from mineral acids, grinding oil. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| ML 189 Linseed Oil | ADM | Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| ML 189-70 Linseed Oil | ADM | ML 189-70 Linseed Oil is dicyclopentadiene copolymer that is 70% ± solids, fast drying, good alkali resistance, and can be made with lighter base for lighter color. It has recommended applications in enamels, varnishes, reinforced oils, and aluminum paint...展开 ML 189-70 Linseed Oil is dicyclopentadiene copolymer that is 70% ± solids, fast drying, good alkali resistance, and can be made with lighter base for lighter color. It has recommended applications in enamels, varnishes, reinforced oils, and aluminum paints. 收起 | |
| Non-Break Linseed Oil | ADM | Non-Break Linseed Oil is a alkali refined oil designed for resins not requiring light color retention on long heating, such as alkyds, vehicles, varnishes, and driers. | |
| OKO™ M-17 Linseed Oil | ADM | OKO™ M-17 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z7+ - Z8—. This product has applications in enamels, varnish...展开 OKO™ M-17 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z7+ - Z8—. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-2 1/2 Linseed Oil | ADM | OKO™ M-2 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z4— - Z4+. This product has applications in enamels, varn...展开 OKO™ M-2 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z4— - Z4+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-25 Linseed Oil | ADM | OKO™ M-25 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z8— - Z8+. This product has applications in enamels, varnish...展开 OKO™ M-25 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z8— - Z8+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-37 Linseed Oil | ADM | OKO™ M-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z9— - Z9+. This product has applications in enamels, varnish...展开 OKO™ M-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z9— - Z9+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ M-7 1/2 Linseed Oil | ADM | OKO™ M-7 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z6+ - Z7—. This product has applications in enamels, varn...展开 OKO™ M-7 1/2 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z6+ - Z7—. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ S-37 Linseed Oil | ADM | OKO™ S-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z— - Z+. This product has applications in enamels, varnishes...展开 OKO™ S-37 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z— - Z+. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OKO™ S-70 Linseed Oil | ADM | OKO™ S-70 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z2+ - Z3—. This product has applications in enamels, varnish...展开 OKO™ S-70 Linseed Oil, in the form of amber clear liquid, is heat polymerized linseed oil made from a special vacuum process and contains low acid numbers (1-3), light color, and viscosity (G-H) Z2+ - Z3—. This product has applications in enamels, varnishes, mastics, house paints, printing inks, and more. 收起 | |
| OptiXan™ 40 | ADM | OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology contro...展开 OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. 收起 | |
| OptiXan™ Dispersible | ADM | OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such ...展开 OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. 收起 | |
| Pale Grinders | ADM | Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Pale Litho | ADM | Pale Litho, in the form of amber clear liquid, is a heat polymerized linseed oil that is lighter colored and a lower acid number than regular litho oils. It has recommended applications in varnishes, paints, and lithographic inks. | |
| Raw Linseed Oil | ADM | Raw Linseed Oil, in the form of amber clear liquid, is double filtered and well settled with a specific gravity of 0.926 to 0.931 at 25°C. It has applications in caulking compounds, tempering oil, core oils, paints, and more. | |
| Refined and Bleached Linseed Oil | ADM | Refined and Bleached Linseed Oil will not break at varnish kettle temperatures and bleaches water white on heating. It has applications in enamels, driers, varnishes, and grinding oils. | |
| Scientific Boiled Linseed Oil | ADM | Scientific Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds and paints (drying time 6-16 hours)...展开 Scientific Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds and paints (drying time 6-16 hours). 收起 | |
| Scientific Double Boiled Linseed Oil | ADM | Scientific Double Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds, carbon electrodes, and pain...展开 Scientific Double Boiled Linseed Oil, in the form of amber clear liquid, is a raw linseed oil with cobalt and manganese dryers with a specific gravity of 0.93 at 25°C. It has recommended applications in anti-spalling compounds, carbon electrodes, and paints (drying time 8 hours). 收起 | |
| Special Raw Linseed Oil | ADM | Special Raw Linseed Oil is slightly oxidized, rapid bodying, and will not break at varnish kettle temperatures. It imparts good gloss and flow to paints and has applications in grinding oils, vehicles, and printing inks. | |
| Superb Linseed Oil | ADM | Superb Linseed Oil, in the form of amber clear liquid, is fully alkali refined, dewaxed, and bleached oil that will not break at varnish kettle temperatures and bleaches water white on heating. It has applications in fast-drying and high quality varnishes...展开 Superb Linseed Oil, in the form of amber clear liquid, is fully alkali refined, dewaxed, and bleached oil that will not break at varnish kettle temperatures and bleaches water white on heating. It has applications in fast-drying and high quality varnishes, resins, enamel vehicles, epoxidation, and printing inks. 收起 | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 900 | Synpol Products PVT. Ltd | Synpol 900 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3 and a melting point 95-105ºC. Synpol 900 is most commonly used in air-dry and bake finish, as well as powder coating applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol AT-70 | Synpol Products PVT. Ltd | Synpol AT-70 is an acrylic copolymer solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-70 is most commonly used in metal finish applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol B-723 | Synpol Products PVT. Ltd | Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium l...展开 Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium lacquer applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. |
