2,2-Dibromo-3-Nitrilopropionamide (DBNPA) | ChemFine International Co., Ltd. | 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive. | |
BIT | ChemFine International Co., Ltd. | BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, pri...展开 BIT, also known as 1.2-Benzisothiazolin-3-one, is an antiseptic and bactericide that can restrain microbes (algae, fungi, germ, etc.) from growing in organic medium and is applicable in latex product, water-soluble resin (latex paint), photo fixative, printing ink and more. 收起 | |
Desmocolor Black PU, VPA 503/1 | mk chemicals | Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ar...展开 Desmocolor Black PU, VPA 503/1 is a black colored pasty to liquid pigment. It has a pigment content of 15%, an organic solvents value of 35%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Concrete Grey, VPA 275/14 | mk chemicals | Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings ...展开 Desmocolor Concrete Grey, VPA 275/14 is a grey colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 20.6%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Cream White, VPA 275/1 | mk chemicals | Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that...展开 Desmocolor Cream White, VPA 275/1 is a white colored pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Grey White, VPA 275/2 | mk chemicals | Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on ro...展开 Desmocolor Grey White, VPA 275/2 is a pasty to liquid pigment. It has a pigment content of 66%, an organic solvents value of 19%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Nut Brown, VPA 275/10 | mk chemicals | Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that ...展开 Desmocolor Nut Brown, VPA 275/10 is a brown colored pasty to liquid pigment. It has a pigment content of 58%, an organic solvents value of 26%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Olive Green, VPA 275/15 | mk chemicals | Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings tha...展开 Desmocolor Olive Green, VPA 275/15 is a green colored pasty to liquid pigment. It has a pigment content of 69%, an organic solvents value of 17%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor Pebble Grey, VPA 275/4 | mk chemicals | Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings t...展开 Desmocolor Pebble Grey, VPA 275/4 is a grey colored pasty to liquid pigment. It has a pigment content of 67.3%, an organic solvents value of 18.3%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Desmocolor White PU, VPA 434 | mk chemicals | Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are ...展开 Desmocolor White PU, VPA 434 is a white colored pasty to liquid pigment. It has a pigment content of 70%, an organic solvents value of 14%, and a flash point of 24 degrees Celsius. This product is used in the preparation of polyurethane coatings that are used on roofs and floors. 收起 | |
Enamel Grade Titanium Dioxide HTD-E | Hoten Chemical International Group | Enamel Grade Titanium Dioxide HTD-E is a white powder made from a sulfuric acid process. This product has a strong opacity making a thin, smooth and acid resistant coating used in enamel and coloring material. | |
HTM-A Barium Sulphate Modified | Hoten Chemical International Group | HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-A Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
HTM-B Barium Sulphate Modified | Hoten Chemical International Group | HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure v...展开 HTM-B Barium Sulphate Modified is a function filler of nanometer-class developed for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
HTM-C Barium Sulphate Modified | Hoten Chemical International Group | HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creati...展开 HTM-C Barium Sulphate Modified is a function filler of nano-meterclass specifically created for electronic printing and writing ink. This product is noted for an efficient pigment dispersibility and to fully retain pigment grains around it, in turn creating a pure vivid color image. 收起 | |
HTN-NO Barium Sulfate Natural | Hoten Chemical International Group | HTN-NO Barium Sulfate Natural is a natural function filler that can be used in paint and improve concentration of coatings. | |
HTN-NP Barium Sulfate Natural | Hoten Chemical International Group | HTN-NP Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
HTN-NQ Barium Sulfate Natural | Hoten Chemical International Group | HTN-NQ Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
HTN-NR Barium Sulfate Natural | Hoten Chemical International Group | HTN-NR Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
HTN-NS Barium Sulfate Natural | Hoten Chemical International Group | HTN-NS Barium Sulfate Natural is a natural filler than can be used to improve the concentration of coatings and reduce levels of resin and solvent in formulas for cost-cutting measures. | |
HTS-H Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow dist...展开 HTS-H Synthetic Barium Sulfate is a chemically synthesized barium sulfate derived from the processing of barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
HTS-L Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-L Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
HTS-M Synthetic Barium Sulfate | Hoten Chemical International Group | HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribut...展开 HTS-M Synthetic Barium Sulfate is a chemically synthesized barium sulfate product derived from pure barium salt and sodium sulfate. As a filler, it can be used to cut costs on resin, and has good light fastness, weathering resistance, and narrow distribution of grain sizes. This product is used in several coating applications. 收起 | |
Hycure 1173 | ChemFine International Co., Ltd. | Hycure 1173, also known as 2-Hydroxy-2-Methyl-1-Phenylpropan, is a photoinitiator for ultraviolet solidify systems that can extend the storeable time and keep it from turning yellow for a long time. | |
Hycure 184 | ChemFine International Co., Ltd. | Hycure 184, also known as 1-Hydroxycyclohexyl Phenyl Ketone, is a photoinitiator used for ultraviolet solidify systems that can extend its store-able time and keep it from turning yellow for a long time. | |
Hycure 907 | ChemFine International Co., Ltd. | Hycure 907, also known as 2-Methy-1-[4-(methylthio)-Phenyl]-2-Morpholinopropan-1-One, is a high performance photoinitiator and is used for ultraviolet solidify systems, extending its store-able time and keeping it from turning yellow for a long time. | |
Hycure BDK | ChemFine International Co., Ltd. | Hycure BDK, also known as 2,2-Dimethoxy- 2-Phenylacetophenone, is a photoinitiator that is mainly used as the light curing agent for ultraviolet curing systems, metal paints, paper paints, and is applied to printing ink. | |
Hycure Benzil | ChemFine International Co., Ltd. | Hycure Benzil, also known as Bibenzoyl, is a photoinitiator used as the raw material for certain medicines, an intermediary for organic synthesis, is an ultraviolet hardening agent and a pesticide. | |
Hycure Benzoin | ChemFine International Co., Ltd. | Hycure Benzoin, also known as 2-diphenyl ethanone, is used as a photoinitiator in regards to photo-curable coatings also as an antiseptic in the pharmaceutical industry. | |
Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
Hycure ITX | ChemFine International Co., Ltd. | Hycure ITX, also known as Isopropyl thioxanthone, has applications in color or transparent UV-photocurable ink, binder, and paint. | |
JLS-APP | ChemFine International Co., Ltd. | JLS-APP, also known as ammonium polyphosphate, is used in intumescent flame retardant coating, as well as polyurethane foam and cellulose. | |
MK Fluo Blue, VPA 596/7 | mk chemicals | MK Fluo Blue, VPA 596/7 is a blue colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK Fluo Yellow, VPA 596/3 | mk chemicals | MK Fluo Yellow, VPA 596/3 is a yellow colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Ecomarker Black, VPA 672/9 | mk chemicals | MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in...展开 MK-Ecomarker Black, VPA 672/9 is a black colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.87 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Blue, VPA 672/5 | mk chemicals | MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Blue, VPA 672/5 is a blue colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.98 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Green, VPA 672/4 | mk chemicals | MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints main...展开 MK-Ecomarker Neon Green, VPA 672/4 is a green colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Orange, VPA 672/3 | mk chemicals | MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints m...展开 MK-Ecomarker Neon Orange, VPA 672/3 is an orange colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Pink, VPA 672/1 | mk chemicals | MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly...展开 MK-Ecomarker Neon Pink, VPA 672/1 is a pink colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Red, VPA 672 | mk chemicals | MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in ...展开 MK-Ecomarker Neon Red, VPA 672 is a red colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker Neon Yellow, VPA 672/2 | mk chemicals | MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints ma...展开 MK-Ecomarker Neon Yellow, VPA 672/2 is a yellow colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 0.94 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Ecomarker White, VPA 672/10 | mk chemicals | MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly i...展开 MK-Ecomarker White, VPA 672/10 is a white colored fluorescent pigment. It has a liquid to pasty viscosity, a flash point of 12 degrees Celsius, and a specific weight of 1.06 grams per cubic centimeter. This product is used in solvent borne paints mainly in aerosol applications. 收起 | |
MK-Epoxycolor 102 Sand Yellow | mk chemicals | MK-Epoxycolor 102 Sand Yellow is a yellow colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 111 Brown Beige | mk chemicals | MK-Epoxycolor 111 Brown Beige is a pasty to liquid pigment. It has a pigment content of 44%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 120 Olive Yellow | mk chemicals | MK-Epoxycolor 120 Olive Yellow is a pasty to liquid pigment. It has a pigment content of 47%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 313 Tomato Red | mk chemicals | MK-Epoxycolor 313 Tomato Red is a red colored pasty to liquid pigment. It has a pigment content of 40%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 602 Leaf Green | mk chemicals | MK-Epoxycolor 602 Leaf Green is a green colored pasty to liquid pigment. It has a pigment content of 36%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 621 Pale Green | mk chemicals | MK-Epoxycolor 621 Pale Green is a green colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 700 Squirrel Grey | mk chemicals | MK-Epoxycolor 700 Squirrel Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 723 Concrete Grey | mk chemicals | MK-Epoxycolor 723 Concrete Grey is a grey colored pasty to liquid pigment. It has a pigment content of 49%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 730 Stone Grey | mk chemicals | MK-Epoxycolor 730 Stone Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 731 Blue Grey | mk chemicals | MK-Epoxycolor 731 Blue Grey is a pasty to liquid pigment. It has a pigment content of 48%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 732 Pebble Grey | mk chemicals | MK-Epoxycolor 732 Pebble Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 733 Cement Grey | mk chemicals | MK-Epoxycolor 733 Cement Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 735 Light Grey | mk chemicals | MK-Epoxycolor 735 Light Grey is a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor 738 Agate Grey | mk chemicals | MK-Epoxycolor 738 Agate Greyis a grey colored pasty to liquid pigment. It has a pigment content of 50%, and a flash point of greater than 100 degrees Celsius. This product is used in the preparation of epoxide coatings. | |
MK-Epoxycolor Black P. Bk. 11 | mk chemicals | MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Black P. Bk. 11 is a black colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.91 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Blue P. B. 15:1 | mk chemicals | MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Blue P. B. 15:1 is a blue colored pasty to liquid pigment. It has a pigment content of 16%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.21 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Bright Red P. R. 112 | mk chemicals | MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparat...展开 MK-Epoxycolor Bright Red P. R. 112 is a red colored pasty to liquid pigment. It has a pigment content of 25%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.19 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Bright Yellow P. Y. 74 | mk chemicals | MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation...展开 MK-Epoxycolor Bright Yellow P. Y. 74 is a yellow colored pasty to liquid pigment. It has a pigment of 30%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.28 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Green P. G. 17 | mk chemicals | MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation ...展开 MK-Epoxycolor Green P. G. 17 is a green colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.94 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Red P. R. 101 | mk chemicals | MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of ...展开 MK-Epoxycolor Red P. R. 101 is a red colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.92 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor White P. W. 6 | mk chemicals | MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation o...展开 MK-Epoxycolor White P. W. 6 is a white colored pasty to liquid pigment. It has a pigment content of 50%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.87 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Epoxycolor Yellow P. Y. 42 | mk chemicals | MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparatio...展开 MK-Epoxycolor Yellow P. Y. 42 is a yellow colored pasty to liquid pigment. It has a pigment content of 40%, a flash point of greater than 100 degrees Celsius, and a specific weight of 1.63 grams per cubic centimeter. This product is used in the preparation of epoxide coatings. 收起 | |
MK-Fluo Green, VPA 596/1 | mk chemicals | MK-Fluo Green, VPA 596/1 is a green colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Orange, VPA 596/5 | mk chemicals | MK-Fluo Orange, VPA 596/5 is an orange colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Pink, VPA 596/4 | mk chemicals | MK-Fluo Pink, VPA 596/4 is a pink colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Fluo Red, VPA 596 | mk chemicals | MK-Fluo Red, VPA 596 is a red colored liquid to pasty pigment. It has a pigment content of 40%, a water value of 57% ± 1%, and an additives value of 3%. This product is used in water borne, fluorescent coatings. | |
MK-Hydrocolor Bismuth Vanadate Yellow | mk chemicals | MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments tha...展开 MK-Hydrocolor Bismuth Vanadate Yellow is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 32% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Black 7, VPA 26 | mk chemicals | MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that ar...展开 MK-Hydrocolor Black 7, VPA 26 is a carbon black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 60% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Black P. Bk. 7, VPA 344/12 | mk chemicals | MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are us...展开 MK-Hydrocolor Black P. Bk. 7, VPA 344/12 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Blue 15:1 | mk chemicals | MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Blue 15:1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 35.5% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 | mk chemicals | MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are ...展开 MK-Hydrocolor Blue P. B. 15:1, VPA 344/24/1 is a blue colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 38% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Chromium Oxide Green | mk chemicals | MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Chromium Oxide Green is a green colored pasty to liquid pigment. It has a pH value of 7,5 to 9.0, a pigment content of 60% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Fanal Violet 27 | mk chemicals | MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printin...展开 MK-Hydrocolor Fanal Violet 27 is a purple colored pigment. It has a pH value of 7.0 to 9.0, a pigment content of 25% ± 1%, and a water value of 62% ± 1%. This product has good flocculation resistance and printing properties, and is used in pigment printing preparations for water based flexo and gravure printings inks. 收起 | |
MK-Hydrocolor Green 7 | mk chemicals | MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paint...展开 MK-Hydrocolor Green 7 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 55% ± 1%, and a water value of 39% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Green GN P. G. 17, VPA 344/20 | mk chemicals | MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are...展开 MK-Hydrocolor Green GN P. G. 17, VPA 344/20 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 68% ± 1%, and a water value of 22% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Green P. G. 7, VPA 344/21 | mk chemicals | MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are use...展开 MK-Hydrocolor Green P. G. 7, VPA 344/21 is a green colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Iron Oxide Black 306 | mk chemicals | MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 306 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Black 318 | mk chemicals | MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that ar...展开 MK-Hydrocolor Iron Oxide Black 318 is a black colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Red 110 | mk chemicals | MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 110 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Red 130 | mk chemicals | MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 130 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 70% ± 1%, and a water value of 20% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Red 160 | mk chemicals | MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are us...展开 MK-Hydrocolor Iron Oxide Red 160 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 40% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Yellow 3910 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...展开 MK-Hydrocolor Iron Oxide Yellow 3910 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Iron Oxide Yellow 3920 | mk chemicals | MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that...展开 MK-Hydrocolor Iron Oxide Yellow 3920 is a yellow colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 60% ± 1%, and a water value of 35% ± 1%. This product is used in the preparation of inorganic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Orange 34 | mk chemicals | MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Orange 34 is an orange colored pasty to liquid pigment. It has a pH value of7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 53% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Orange 5 | mk chemicals | MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Orange 5 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Orange 943, VPA 344/23/1 | mk chemicals | MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are us...展开 MK-Hydrocolor Orange 943, VPA 344/23/1 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 57% ± 1%, and a water value of 30% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Orange P. O. 67, VPA 344/28 | mk chemicals | MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are...展开 MK-Hydrocolor Orange P. O. 67, VPA 344/28 is an orange colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 37% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red 112 | mk chemicals | MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...展开 MK-Hydrocolor Red 112 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 50% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Red 130 M, VPA 344/19 | mk chemicals | MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in c...展开 MK-Hydrocolor Red 130 M, VPA 344/19 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 65% ± 1%, and a water value of 25% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red 146 | mk chemicals | MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints ...展开 MK-Hydrocolor Red 146 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 42% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 | |
MK-Hydrocolor Red P. R. 112, VPA 437/4 | mk chemicals | MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used i...展开 MK-Hydrocolor Red P. R. 112, VPA 437/4 is a XXX colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 45% ± 1%, and a water value of 41% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red P. R. 122, VPA 344/26 | mk chemicals | MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used ...展开 MK-Hydrocolor Red P. R. 122, VPA 344/26 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 34% ± 1%, and a water value of 43% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Red P. R. 170, VPA 344/22 | mk chemicals | MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used ...展开 MK-Hydrocolor Red P. R. 170, VPA 344/22 is a red colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 40% ± 1%, and a water value of 38% ± 1%. This product is used in the preparation of water based pigments that are used in coating binders, and colors. 收起 | |
MK-Hydrocolor Tinting Black WD, VPA 26 | mk chemicals | MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron o...展开 MK-Hydrocolor Tinting Black WD, VPA 26 is a black colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 0.5%, and a water value of 50% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Tiosorb WD, VPA 78 | mk chemicals | MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium diox...展开 MK-Hydrocolor Tiosorb WD, VPA 78 is a white colored, transparent, pasty to liquid pigment. It has a pigment content of 50% ± 1%, an additives value of 2.7%, and a pH value of 7.0 to 9.0. This product is used in the preparation of water based titanium dioxide pigments that are used in wood stain coatings as an U.V. absorber. 收起 | |
MK-Hydrocolor Transoxide Orange WD | mk chemicals | MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide...展开 MK-Hydrocolor Transoxide Orange WD is an orange colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6%, and a water value of 40% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Transoxide Red WD | mk chemicals | MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide...展开 MK-Hydrocolor Transoxide Red WD is a red colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 6.0% ± 1%, and a water value of 34% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Transoxide Yellow WD | mk chemicals | MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron o...展开 MK-Hydrocolor Transoxide Yellow WD is a yellow colored, transparent, pasty to liquid pigment. It has a pigment content of 40% ± 1%, an additives value of 7% ± 1%, and a water value of 45% ± 1%. This product is used in the preparation of water based iron oxide pigments that are used in wood stain coatings. 收起 | |
MK-Hydrocolor Violet 23 | mk chemicals | MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in pa...展开 MK-Hydrocolor Violet 23 is a purple colored pasty to liquid pigment. It has a pH value of 7.5 to 9.0, a pigment content of 35% ± 1%, and a water value of 46% ± 1%. This product is used in the preparation of organic water based pigments that are used in paints and colors. 收起 |