| AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂，用于低气味，零VOC户内水性油漆。它具有非常温和的气味，高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
| ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
| AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色，低粘度流体，大量用于金属加工流体，涂料，锅炉水体系和个人护理等领域。它可用作中和树脂的胺，协同分散剂，脱甲醛剂，腐蚀抑制剂以及作为合成的原料。 | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
| AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
| BAL 101 H WS-70 | Bonyan Kala Chemie Co. | BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and g...展开 BAL 101 H WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 800-1500 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 101 L WS-70 | Bonyan Kala Chemie Co. | BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and ...展开 BAL 101 L WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, and coverage properties. This product has a viscosity of 350-650 stoke at 25°C and is used in industrial varnishes, metal structural coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 102 WS-70 | Bonyan Kala Chemie Co. | BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in...展开 BAL 102 WS-70 is a long oil alkyd resin that is used for its coverage, drying, gloss retention, pigment wetting, and dispersing properties. This product has a viscosity of 250-500 stoke at 25°C and is mainly used as a paste in architectural paints, and in architectural and industrial varnishes. 收起 | |
| BAL 103 WS-70 | Bonyan Kala Chemie Co. | BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood...展开 BAL 103 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, adhesion, pigment wetting, dispersing, and coverage properties. This product has a viscosity of 330-550 stoke at 25°C and is used in industrial varnishes, wood and metal coatings, and gloss and semi gloss architectural paints. 收起 | |
| BAL 104 WS-70 | Bonyan Kala Chemie Co. | BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-c...展开 BAL 104 WS-70 is a long oil alkyd resin that is used for its solvent acceptation and filler accountability properties. This product has a viscosity of 1000-3500 stoke at 25°C and is mainly used in metal structural coatings, industrial, wood, metal, anti-corrosion and anti-rust primers. 收起 | |
| BAL 106 H WS-70 | Bonyan Kala Chemie Co. | BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural,...展开 BAL 106 H WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 500-1500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 106 L WS-70 | Bonyan Kala Chemie Co. | BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal...展开 BAL 106 L WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, pigment wetting, good coverage and dispersing properties. This product has a viscosity of 300-500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, spray paints, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 108 WS-70 | Bonyan Kala Chemie Co. | BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood...展开 BAL 108 WS-70 is a long oil alkyd resin that is used for its hardness, drying, gloss retention, solvent acceptation, good coverage and adhesion properties. This product has a viscosity of 500-1000 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 116 WS-70 | Bonyan Kala Chemie Co. | BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood,...展开 BAL 116 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, hardness and filler accountability properties. This product has a viscosity of 1000-2500 stoke at 25°C and is mainly used in metal structural, wood, and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 118 WS-70 | Bonyan Kala Chemie Co. | BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coa...展开 BAL 118 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and filler accountability properties. This product has a viscosity of 1000-3000 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAL 120 WS-70 | Bonyan Kala Chemie Co. | BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coating...展开 BAL 120 WS-70 is a long oil alkyd resin that is used for its drying, gloss retention, solvent acceptation, good coverage and solvent acceptation properties. This product has a viscosity of 300-700 stoke at 25°C and is mainly used in wood and metal coatings, as well as gloss and semi gloss architectural paints. 收起 | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke ...展开 BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. 收起 | |
| BAM 203 X-60 | Bonyan Kala Chemie Co. | BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at...展开 BAM 203 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-100 stoke at 25°C and is mainly used in auto body repair paints, metallic paints, industrial machinery coatings, metal structural coatings, and industrial air-drying paints. 收起 | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke ...展开 BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. 收起 | |
| BAM 208 WSX-55 | Bonyan Kala Chemie Co. | BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke ...展开 BAM 208 WSX-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-180 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, cabinet and spray paints, and industrial air-drying paints. 收起 | |
| BAM 212 X-60 | Bonyan Kala Chemie Co. | BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at ...展开 BAM 212 X-60 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 60-90 stoke at 25°C and is mainly used in auto body repair paints, industrial machinery coatings, metallic paints, industrial air-drying paints, and paint paste. 收起 | |
| BAS 302 X-60 | Bonyan Kala Chemie Co. | BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in...展开 BAS 302 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 50-80 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, amino resin based stoving paints, acid curing coatings, and printing inks. 收起 | |
| BAS 305 X-50 | Bonyan Kala Chemie Co. | BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in...展开 BAS 305 X-50 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 40-90 stoke at 25°C and is mainly used in hammer finish paints, anti-corrosion primers, fast dry paints, and industrial air-drying paints. 收起 | |
| BAS 307 X-60 | Bonyan Kala Chemie Co. | BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used ...展开 BAS 307 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 250-450 stoke at 25°C and is mainly used in nitro-cellulose lacquers, amino resin based stoving paints, acid curing coatings, and auto parts stoving paints. 收起 | |
| BAS 310 H X-60 | Bonyan Kala Chemie Co. | BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly use...展开 BAS 310 H X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 200-400 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 310 L X-60 | Bonyan Kala Chemie Co. | BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly use...展开 BAS 310 L X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 100-200 stoke at 25°C and is mainly used in nitro-cellulose paints and lacquers, alkyd amin varnishes, acid curing coatings, and anti-corrosion primers. 收起 | |
| BAS 312 X-60 | Bonyan Kala Chemie Co. | BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used i...展开 BAS 312 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 80-120 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BAS 313 X-60 | Bonyan Kala Chemie Co. | BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used...展开 BAS 313 X-60 is a short oil alkyd resin that is used for its gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 600-1000 stoke at 25°C and is mainly used in nitro-cellulose paints, alkyd amin lacquers, and anti-corrosion primers. 收起 | |
| BD-Ca-5 | Bonyan Kala Chemie Co. | BD-Ca-5 is a drier that appears as a clear yellow liquid. This product is an auxiliary drier and has a metal content of 5±0.2. It is often used for air through and surface drying systems. | |
| BD-Co-10 | Bonyan Kala Chemie Co. | BD-Co-10 is a drier that appears as a violet liquid. This product is an active oxidation drier and has a metal content of 10±0.2. It is often used as an accelerator for unsaturated polyester resins and in air drying systems. | |
| BD-Pb-32 | Bonyan Kala Chemie Co. | BD-Pb-32 is a drier that appears as a clear yellow liquid. This product is a through drier and has a metal content of 32±0.5. It is often used for air through and surface drying systems. | |
| BD-Zr-18 | Bonyan Kala Chemie Co. | BD-Zr-18 is a drier that appears as a light yellow liquid. This product is a through drier and has a metal content of 18±0.3. It is often used in air drying systems, metallic paints, metallic varnishes and coatings. | |
| BENTOBRITE® 770 | American Colloid Company | BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and othe...展开 BENTOBRITE® 770 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This product is a suspending agent and gellant for use in household products, automotive products, aerosols, paints, enamels and other industrial applications. 收起 | |
| BENTOBRITE® KB-325 | American Colloid Company | BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used ...展开 BENTOBRITE® KB-325 is a white sodium bentonite that is selectively mined, micronized, and supplied as a free-flowing powder. This pure, high-brightness clay is used in applications that require good color and moderate thixotropy. This product can be used as a suspending agent, gellant, and binder for use in household products, automotive products and paints, aerosols, enamels and other industrial specialty applications where high solid levels and low viscosity are desired. 收起 | |
| BUP 612 | Bonyan Kala Chemie Co. | BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a ...展开 BUP 612 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 550-750CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 615 | Bonyan Kala Chemie Co. | BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in ...展开 BUP 615 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, and good physical and mechanical properties after curing. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 620 | Bonyan Kala Chemie Co. | BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a visc...展开 BUP 620 is an unsaturated polyester resin that is used for its low color, excellent adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 400-650CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 621 | Bonyan Kala Chemie Co. | BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity...展开 BUP 621 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 380-480CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 623 | Bonyan Kala Chemie Co. | BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a v...展开 BUP 623 is an unsaturated polyester resin that is used for its good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited shrinkage, and filler appropriate accountability properties. This product has a viscosity of 500-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 624 | Bonyan Kala Chemie Co. | BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP ...展开 BUP 624 is an unsaturated polyester resin that is used for its low color, medium viscosity, good physical and mechanical properties after curing, resistant to UV, and filler appropriate accountability properties. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 625 | Bonyan Kala Chemie Co. | BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly use...展开 BUP 625 is an unsaturated polyester resin that is used for its medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 350-500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 626 | Bonyan Kala Chemie Co. | BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of ...展开 BUP 626 is an unsaturated polyester resin that is used for its low color, limited water absorption, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 450-650CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 629 | Bonyan Kala Chemie Co. | BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosit...展开 BUP 629 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistant to impact. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 630 | Bonyan Kala Chemie Co. | BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and go...展开 BUP 630 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, resistant to hydrolysis, and good flexibility and good resistant to impact. This product has a viscosity of 450-700CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 631 | Bonyan Kala Chemie Co. | BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product ha...展开 BUP 631 is an unsaturated polyester resin that is used for its moderate gel time, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 700-1000CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 640 | Bonyan Kala Chemie Co. | BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C a...展开 BUP 640 is an unsaturated polyester resin that is used for its low gel time, low color, high viscosity, good physical and mechanical properties after curing, and good flexibility and good transparency. This product has a viscosity of 1200-1700CP at 25°C and is commonly used in general purpose applications and goods that need high transparency. 收起 | |
| BUP 643 | Bonyan Kala Chemie Co. | BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and...展开 BUP 643 is an unsaturated polyester resin that is used for its low gel time, medium viscosity, good physical and mechanical properties after curing, and good flexibility and good resistance to impact. This product has a viscosity of 900-1500CP at 25°C and is commonly used in general purpose applications. 收起 | |
| BUP 660 | Bonyan Kala Chemie Co. | BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 660 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 600-900CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 665 | Bonyan Kala Chemie Co. | BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a visc...展开 BUP 665 is an unsaturated polyester resin that is used for its low color, good adhesion to glass fibers, medium viscosity, good physical and mechanical properties after curing, limited water absorption, and resistant to hydrolysis. This product has a viscosity of 800-1200CP at 25°C and is commonly used in general purpose applications and gel coats. 收起 | |
| BUP 690 | Bonyan Kala Chemie Co. | BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and ...展开 BUP 690 is an unsaturated polyester resin that is used for its moderate gel time, low viscosity, good physical and mechanical properties after curing, and filler appropriate accountability properties. This product has a viscosity of 300-450CP at 25°C and is commonly used in general purpose applications. 收起 | |
| DMAMP-80® | ANGUS Chemical Company 安格斯化学公司 | DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...展开 DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. 收起 | |
| FLEXITANE® CA 6000 | ANGUS Chemical Company 安格斯化学公司 | 一种经过改进的万能专业涂料助剂，是一种有效的溶液，能够满足涂料配方的要求，减少特殊助剂的用量。 | |
| HECTABRITE® DP | American Colloid Company | HECTABRITE® DP is a highly purified white sodium hectorite that is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It exhibits a high degree of shear thinning a...展开 HECTABRITE® DP is a highly purified white sodium hectorite that is surface modified and is supplied as a free-flowing powder. This product produces high viscosities and high gel strengths at low solids levels. It exhibits a high degree of shear thinning and can be used as a binder and plasticizer to ease extrusion and increase green strength in paints, ceramic glazes, and in other applications where a high degree of anti-settling and anti-sag are required. 收起 | |
| HECTALITE® 200 | American Colloid Company | HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheolo...展开 HECTALITE® 200 is a high-purity, micronized sodium hectorite clay, consisting of microfine particles for emulsion stabilizing, gelling, suspending, and binding. This product is a high-yielding hectorite clay that exhibits high efficiency, excellent rheology and stability, and is typically used in architectural paints, ceramics, and adhesives. 收起 | |
| MAGNABRITE® T | American Colloid Company | MAGNABRITE® T is a highly-purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. This product is used whenever an inorganic, thixotropic material is desired to disperse pigments, retard settling, impart body or stabi...展开 MAGNABRITE® T is a highly-purified, selected blend of white smectite clays supplied as small flakes to ease dispersion. This product is used whenever an inorganic, thixotropic material is desired to disperse pigments, retard settling, impart body or stabilize emulsions. It is a nonmigrating binder which delivers high yield values that enable the successful suspension of high-density pigments and particles. It can find applications in paints and ceramics. 收起 | |
| NIKANE® MS 3000 | ANGUS Chemical Company 安格斯化学公司 | 一种性能独特的多功能溶剂，用于构成多种工业保养涂料体系中的溶剂型还原剂和冲淡剂。 | |
| NIKANE® MS 5000 | ANGUS Chemical Company 安格斯化学公司 | 一种多功能溶剂，在溶剂型体系中有独特的性能。不但能够轻易地溶解各种材料，而且能够赋予溶解液以特性，因此得到了广泛的应用。 | |
| POLARGEL® | American Colloid Company | POLARGEL® is a specially processed, water-washed product that is a selectively-mined sodium montmorillonite clay, supplied as a white micro fine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer for a variety of indus...展开 POLARGEL® is a specially processed, water-washed product that is a selectively-mined sodium montmorillonite clay, supplied as a white micro fine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer for a variety of industrial products where low grit, light color, and high purity are required. 收起 | |
| POLARGEL® CA | American Colloid Company | POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a bin...展开 POLARGEL® CA is a micronized white calcium bentonite that is selectively mined and supplied as a free-flowing powder. This specialty clay product is used in applications requiring light color, high solid levels and low viscosity. It is often used as a binder and plasticizer to ease extrusion and increase green strength with minimal viscosity increase. 收起 | |
| POLARGEL® T | American Colloid Company | POLARGEL® T is a specially processed, water-washed product that is a selectively- mined sodium montmorillonite clay, supplied as a white microfine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer used in coatings. It...展开 POLARGEL® T is a specially processed, water-washed product that is a selectively- mined sodium montmorillonite clay, supplied as a white microfine powder. This product is a suspending agent, viscosifier, binder and emulsion stabilizer used in coatings. It is used whenever a white, inorganic, thixotropic material is desired for formulations. 收起 | |
| Toda Color 100CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 100CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 100EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 100EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color 120CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 120CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
| Toda Color 120EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 120EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
| Toda Color 130CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 130CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7 and can be used in coatings and inks. | |
| Toda Color 130EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 130EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 134CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 134CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 140CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 140 CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 140EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 140EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color 160CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 160CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 160EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 160EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color 180CR | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 180CR, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 5-7, and can be used in coatings and inks. | |
| Toda Color 180EDS | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color 180EDS, in the form of a micronized powder, is a red iron oxide pigment. This product has a pH value of 5-7 and can be used in powder coatings and inks. | |
| Toda Color CB-502 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CB-502, in the form of a black powder, is an iron oxide pigment. This product has a pH value of 5-7.5, and can be used in coatings and inks. | |
| Toda Color CB-740(A) | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CB-740(A), in the form of a micronized powder, is a black iron oxide pigment. This product has a pH value of 5-7.5 and can be used in powder coatings and inks. | |
| Toda Color CHS-120 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-120M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-120MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-120MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-125MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-125MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180, in the form of a red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180M | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180M, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 3-5 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color CHS-180MP | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color CHS-180MP, in the form of a micronized red powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 20-30 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TAN TOP-100 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TAN TOP-100, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7.5 and an oil absorption of 40-50 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-1 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-1H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-1H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-2 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color TSY-2H | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color TSY-2H, in the form of a micronized powder, is a yellow iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 25-35 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| Toda Color Y-50 | Deqing Toda Sanfeng Pigment Co., Ltd. | Toda Color Y-50, in the form of a yellow powder, is an iron oxide pigment. This product has a pH value of 5-7 and an oil absorption of 30-40 ml/100g, and it can be used in heat-resistant coatings and inks. | |
| VOLCLAY® 325 Mesh | American Colloid Company | VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial app...展开 VOLCLAY® 325 Mesh is a selectively-mined and processed sodium bentonite that is a true micronized product that produces consistency and performance. This product is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial applications where low grit and a small, dry particle size are required. It can be applied in ceramics, porcelain and glaze applications. 收起 | |
| VOLCLAY® GPG 30 | American Colloid Company | VOLCLAY® GPG 30 is a granular sodium bentonite with an average particle size ranging between 20 and 70 mesh. This product is a multi-purpose product noted for rapid dispersion in water. It is employed in a wide variety of industrial applications. | |
| VOLCLAY® HPM-20 | American Colloid Company | VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, ...展开 VOLCLAY® HPM-20 is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in adhesives and industrial applications. 收起 | |
| VOLCLAY® HPM-75 | American Colloid Company | VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion sta...展开 VOLCLAY® HPM-75 is a high-purity sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This high-purity montmorillonite is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer for adhesives, coatings, and other industrial applications. 收起 | |
| VOLCLAY® Premium Gel | American Colloid Company | VOLCLAY® Premium Gel is a general purpose filler for use when mild thixotropic properties are desirable. This product is a 200 mesh rheology enhancer, and it is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial product...展开 VOLCLAY® Premium Gel is a general purpose filler for use when mild thixotropic properties are desirable. This product is a 200 mesh rheology enhancer, and it is often used as a multi-purpose suspending, emulsifying, and binding agent in industrial products where a dry 200 mesh particle size and medium viscosity is required. 收起 | |
| VOLCLAY® Rheospan | American Colloid Company | VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabi...展开 VOLCLAY® Rheospan is a high-purity, air-classified sodium bentonite, selectively-mined, consisting of micronized particles and supplied as a free-flowing powder. This product is typically used as a suspending agent, viscosifier, binder, and emulsion stabilizer in a variety of industrial applications. 收起 | |
| VOLCLAY® SPV 200 | American Colloid Company | VOLCLAY® SPV 200 is a selectively-mined and processed, high-quality sodium bentonite. This product is a multi-purpose suspending, emulsifying, and binding agent used in industrial products where a dry 200 mesh particle size is required. | |
| ZOLDINE® MS-PLUS | ANGUS Chemical Company 安格斯化学公司 | 快速反应、低黏度呃唑烷基湿气净化剂，用于聚氨酯涂料、密封剂和弹性体。 |
