| FS1-3730 | NuSil Silicone Technology 1 | FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond ...展开 FS1-3730 is an adhesive/sealant that is translucent and based on a 100 mole % fluorosilicone polymer. This product can be utilized for sealing and bonding applications that require solvent and/or fuel resistance. It is a very strong product and will bond aggressively to most surfaces. 收起 | |
| FS3-3730 | NuSil Silicone Technology 1 | FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistan...展开 FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistance. It can also be used for protecting or bonding hardware components that have been exposed to gasoline or aviation fuels. 收起 | |
| GEL-3500 | NuSil Silicone Technology 1 | GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requi...展开 GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best utilized in applications that would require a gel that has a solvent resistance. 收起 | |
| GEL-8170 | NuSil Silicone Technology 1 | GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics ...展开 GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics applications including HBLED's, photo detectors, flat panel displays and tacking/staking sensitive joints. This gel is ideal for applications that require an operating temperature range of -65°C to 200°C (-85°F to 392°F). 收起 | |
| GEL-8250 | NuSil Silicone Technology 1 | GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in appl...展开 GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in applications that involve extreme temperatures with an operating temperature range of -115°C to 265°C (-178°F to 500°F). 收起 | |
| GEL1-8155 | NuSil Silicone Technology 1 | GEL1-8155 is a dielectric firm silicone gel that has a high purity, and consist of two medium viscosity components that blend easily in a 1:1 ratio by weight or volume. It is recommended that this gel be used with automatic dispense systems. It can be use...展开 GEL1-8155 is a dielectric firm silicone gel that has a high purity, and consist of two medium viscosity components that blend easily in a 1:1 ratio by weight or volume. It is recommended that this gel be used with automatic dispense systems. It can be used for backfilling, potting, dampening, and encapsulating applications that require a firm gel with optical clarity. 收起 | |
| Lead Octoate PB-18 | Prakash Chemical Intl. Pvt. Ltd. | Lead Octoate PB-18 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications wh...展开 Lead Octoate PB-18 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications where drying is required at low temperatures. It has a metal content of 18 % (± 0.2) and a specific gravity of 0.98 at 300°C (± 0.03). 收起 | |
| Lead Octoate PB-24 | Prakash Chemical Intl. Pvt. Ltd. | Lead Octoate PB-24 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications wh...展开 Lead Octoate PB-24 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications where drying is required at low temperatures. It has a metal content of 24% (± 0.2) and a specific gravity of 1.08 at 300°C (± 0.03). 收起 | |
| Lead Octoate PB-36 | Prakash Chemical Intl. Pvt. Ltd. | Lead Octoate PB-36 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications wh...展开 Lead Octoate PB-36 is a pale yellow liquid and is used as an active top drier in paints and coatings. This product provides hard, through drying throughout the film and also provides flexibility. It is the most important auxiliary drier in applications where drying is required at low temperatures. It has a metal content of 36% (± 0.2) and a specific gravity of 1.33 at 300°C (± 0.03). 收起 | |
| Linear Novolac Resin SMP-101 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Linear Novolac Resin SMP-101 is a Novolac epoxy resin used in intermediates. | |
| Linear Novolac Resin SMP-102 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Linear Novolac Resin SMP-102 is a Novolac epoxy resin used in epoxy molding compounds (EMC). | |
| Linear Novolac Resin SMP-103 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Linear Novolac Resin SMP-103 is a Novolac epoxy resin used in epoxy molding compounds (EMC). | |
| Linear Novolac Resin SMP-104 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Linear Novolac Resin SMP-104 is a Novolac epoxy resin used in epoxy molding compounds (EMC). | |
| Linear Novolac Resin SMP-105 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Linear Novolac Resin SMP-105 is a Novolac epoxy resin used in epoxy molding compounds (EMC). | |
| LS-6140 | NuSil Silicone Technology 1 | LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics ...展开 LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics applications that require a low outgassing and minimal volatile condensables to protect sensitive devices from condensation. 收起 | |
| LS-6143 | NuSil Silicone Technology 1 | LS-6143 is an optical thermoset that is based on a dimethyl-diphenyl copolymer with a broad operating temperature range. It can be used in photonics applications that require low outgassing to avoid condensation from forming on or in sensitive devices. It...展开 LS-6143 is an optical thermoset that is based on a dimethyl-diphenyl copolymer with a broad operating temperature range. It can be used in photonics applications that require low outgassing to avoid condensation from forming on or in sensitive devices. It can also be used for bonding, casting or injection molding of permormance optical components. It is best for applications requiring an operating temperature range of -115°C to 260°C (-178°F to 500°F). 收起 | |
| LS-6941 | NuSil Silicone Technology 1 | LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This s...展开 LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This silicone is also ideal for applications that require index matching at 1.41. It is suitable for applications that require an operating temperature range of -65 to 240°C (–85 to 465°F). 收起 | |
| LS-6943 | NuSil Silicone Technology 1 | LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for ...展开 LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for the casting, injecting or bonding molding of high performance optical components. It is ideal to be used applications with an opertaing temperature range of -115 to 260°C (–175 to 500°F). 收起 | |
| LS-6946 | NuSil Silicone Technology 1 | LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product ...展开 LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product is physically strong and operates on a wide temperature range. It is ideal for the bonding, casting or injecting molding of high performance optical components. 收起 | |
| LS-8941 | NuSil Silicone Technology 1 | LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid ...展开 LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques. It is also ideal for molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed. 收起 | |
| LS1-6140 | NuSil Silicone Technology 1 | LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that ...展开 LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that require a low volatility silicone to avoid contamination. 收起 | |
| LS1-6941 | NuSil Silicone Technology 1 | LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components....展开 LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components. It will cure in contact with most materials common to biomedical assemblies. 收起 | |
| LS2-6140 | NuSil Silicone Technology 1 | LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazar...展开 LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazards. It has exceptional thermal stability and is designed to work in optically harsh environments where high power led and uv led packages are a factor. 收起 | |
| LS2-6941 | NuSil Silicone Technology 1 | LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detec...展开 LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detectors, lasers, HBLEDs, discrete optics and flat panel displays that require a 1.41 refractive index. It can also provide protection for electronic components from vibration, shock, dust, moisture and other environmental hazards by potting or encapsulating. 收起 | |
| LYNDCOAT 15 RTU | Elkem Silicones | LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RT...展开 LYNDCOAT 15 RTU is a ready to use water-based coating designed for use in tire molds. It is a blend of polymers that cures at typical molding temperatures to form a clear, tough bond possessing excellent release and lubrication properties. Lyndcoat™ 15 RTU also helps keep molds and vents clean, reducing defects and downtime. Lyndcoat™ 15 RTU typically is durable through multiple production cycles. The need for reapplication is dependent on factors such as the rubber compound, curing time, curing temperature, tread design and application technique. Lyndcoat™ 15 RTU is designed for processes requiring low viscosity mold lubricants. 收起 | |
| LYNDCOAT BR 1100 RTU | Elkem Silicones | LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the c...展开 LYNDCOAT BR1100 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1100 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1100 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1100 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as Lyndcoat™ BR2101 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1102 | Elkem Silicones | LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the c...展开 LYNDCOAT BR1102 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR1102 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR1102 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. Lyndcoat™ BR1102 RTU is of medium viscosity and does not contain mica. 收起 | |
| LYNDCOAT BR 1103 RTU | Elkem Silicones | LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the c...展开 LYNDCOAT BR1103 RTU is a ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR1103 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR1103 RTU does not contain aromatic or chlorinated solvents. It is easy to use and is recommended for a single release application. It can be brushed, swabbed, or sprayed onto the rubber surface. LYNDCOAT® BR1103 RTU is of high viscosity and does not contain mica. For maximum release and bladder life, the use of a durable bladder pre-treatment such as LYNDCOAT® BR2201 RTU is highly recommended. 收起 | |
| LYNDCOAT BR 1110 RTU | Elkem Silicones | LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers ...展开 LYNDCOAT is a ready to use, silicone based, high mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. LYNDCOAT BR 1110 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. LYNDCOAT BR 1110 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as LYNDCOAT BR 2101 RTU, is highly recommended. 收起 | |
| LYNDCOAT BR 1211 | Elkem Silicones | LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtim...展开 LYNDCOAT BR1211 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It was designed for improved bladder protection, a clean operation and reduced press downtimes. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1214 | Elkem Silicones | LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green...展开 LYNDCOAT BR 1214 is a ready to use, water based band ply lubricant. It is part of the new generation reactive silicone emulsions allowing for low coating weights. It is particularly friction resistant and slip promoting. Applied on the inside of the green tire, or directly on the bladder, it insures excellent release, slip and air bleed performance. 收起 | |
| LYNDCOAT BR 1623 RTU | Elkem Silicones | LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coatin...展开 LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer, is highly recommended. 收起 | |
| LYNDCOAT BR 1812 | Elkem Silicones | LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replace...展开 LYNDCOAT BR 1812 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR 1812 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR 1812 RTU does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR 1812 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 2100 RTU | Elkem Silicones | LYNDCOAT BR 2100 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures durable performance. | |
| LYNDCOAT BR 2104 | Elkem Silicones | LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to...展开 LYNDCOAT BR 2104 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a long lasting multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2201 | Elkem Silicones | LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces t...展开 LYNDCOAT BR 2201 is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. LYNDCOAT® BR 2201 replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. LYNDCOAT® BR 2201 does not contain aromatic or chlorinated solvents. It is easy to use and can be brushed, swabbed, or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. LYNDCOAT® BR 2201 is of high viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 2204 A1 | Elkem Silicones | LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build...展开 LYNDCOAT BR 2204 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2204 E4 | Elkem Silicones | LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce b...展开 LYNDCOAT BR 2204 E4 is a solvent free, silicone based, ready to use, inside paint and bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it insures a multi release and slip performance. It was designed to reduce build up notably in the bead area. 收起 | |
| LYNDCOAT BR 2511 RTU | Elkem Silicones | LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performan...展开 LYNDCOAT BR2511 RTU is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines long lasting multi release with excellent slip and exceptional air bleed performance. 收起 | |
| LYNDCOAT BR 2512 | Elkem Silicones | LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performanc...展开 LYNDCOAT BR2512 is a solvent free, silicone based, ready to use, bladder release agent. Applied on the inside of the green tire, or directly on the bladder, it combines particularly long lasting multi release and slip with exceptional air bleed performance. 收起 | |
| LYNDCOAT BR 601 RTU | Elkem Silicones | LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU rep...展开 LYNDCOAT BR-601 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-601 RTU replaces the conventional lining cements and solvent-based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-601 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-601 RTU is of medium viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT BR 790 RTU | Elkem Silicones | LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU rep...展开 LYNDCOAT BR 790 RTU is a durable, ready to use silicone-based bladder release coating designed for butyl rubber bladders typically used in tire curing presses. It is a white aqueous emulsion that promotes excellent slip/release. Lyndcoat™ BR-790 RTU replaces the conventional lining cements and solvent based band ply lubricants, eliminating the problems of flammability, toxicity, and dusty/flaky residues. Lyndcoat™ BR-790 RTU does not contain any solvents. It is easy to use and can be brushed, swabbed or sprayed onto the rubber surface, remaining effective through multiple curing cycles. The cycles between applications depend on application efficiency, curing time, curing temperature, tire construction and composition, and condition. Lyndcoat™ BR-790 RTU is of low viscosity and does not contain mica. It has been shown to increase productivity, improve tire aesthetics and appearance, prolong bladder life, and reduce costs. 收起 | |
| LYNDCOAT MR 5100 RTU | Elkem Silicones | LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessin...展开 LYNDCOAT MR 5100 RTU is a ready to use, solvent free, water based coating designed for use in tire moulds. It is a blend of polymers that cure at typical molding temperatures to form a clear, tough, coating with a strong bond to the metal mould, possessing excellent release and lubrication properties towards rubber. LYNDCOAT MR 5100 RTU helps keep moulds and vents clean, which reduces defects and downtime. LYNDCOAT MR 5100 RTU is durable through multiple production cycles. The need for reapplication is dependent on factors such as: the rubber compound, tread design, curing time, curing temperature, application technique and press type. LYNDCOAT MR 5100 RTU is designed for processes requiring low viscosity mould lubricants. 收起 | |
| Manganese Octoate MN-10 | Prakash Chemical Intl. Pvt. Ltd. | Manganese Octoate MN-10 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization...展开 Manganese Octoate MN-10 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization more efficiently than cobalt. It has a metal content of 10% (± 0.2) and a specific gravity of 0.98 at 300°C (± 0.03). 收起 | |
| Manganese Octoate MN-6 | Prakash Chemical Intl. Pvt. Ltd. | Manganese Octoate MN-6 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization ...展开 Manganese Octoate MN-6 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization more efficiently than cobalt. It has a metal content of 6% (± 0.2) and a specific gravity of 0.89 at 300°C (± 0.03). 收起 | |
| Manganese Octoate MN-8 | Prakash Chemical Intl. Pvt. Ltd. | Manganese Octoate MN-8 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization ...展开 Manganese Octoate MN-8 is a brown liquid that is primarily used in floor finishes, backing enamels, and in exterior paints where color is not a constraint. This product is a strong oxidant and acts as an active drier metal, and it promotes polymerization more efficiently than cobalt. It has a metal content of 8% (± 0.2) and a specific gravity of 0.93 at 300°C (± 0.03). 收起 | |
| Melamine Resin 5136 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 5136 is an Iso-Butylated Melamine Resin used in quick drying amino paint under low temperatures. | |
| Melamine Resin 5138 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 5138 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 582 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 582 is a N-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-2 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 582-2 is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-2A | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 582-2A is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-2L | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 582-2L is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-2U | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 582-2U is an Iso-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 582-3 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 582-3 is a N-Butylated Melamine Resin used in industrial baking paint with high solid content. | |
| Melamine Resin 582L | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 582L is a N-Butylated Melamine Resin used in industrial baking paint. | |
| Melamine Resin 585-1 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 585-1 is an Iso-Butylated Melamine Resin used in quick drying amino paint under low temperatures. | |
| Melamine Resin 5860 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 5860 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 5862 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 5862 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 5865 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 5865 is an Iso-Butylated Melamine Resin used in automotive paint and coli back coatings. | |
| Melamine Resin 5872 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 5872 is a N-Butylated Melamine Resin used in automotive paint. | |
| Melamine Resin 590-3 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Melamine Resin 590-3 is a N-Butylated Melamine Resin used in amino alkyd baking paint. | |
| Methyl Ethyl Ketoxime | Prakash Chemical Intl. Pvt. Ltd. | Methyl Ethyl Ketoxime is an essential chemical used as an anti-skinning agent in paints and lacquers. This product can be used as an urethane blocking agent for coating applications which include powder coatings, automotive coatings, and coatings on plast...展开 Methyl Ethyl Ketoxime is an essential chemical used as an anti-skinning agent in paints and lacquers. This product can be used as an urethane blocking agent for coating applications which include powder coatings, automotive coatings, and coatings on plastic, textiles and general industrial metal. 收起 | |
| Methylated Amino Resin SM5717 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Methylated Amino Resin SM5717 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5717W | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Methylated Amino Resin SM5717W is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and automotive paints. | |
| Methylated Amino Resin SM5747 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Methylated Amino Resin SM5747 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5780 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Methylated Amino Resin SM5780 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in can coatings. | |
| Methylated Amino Resin SM5817 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Methylated Amino Resin SM5817 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5847 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Methylated Amino Resin SM5847 is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Methylated Amino Resin SM5847L | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Methylated Amino Resin SM5847L is an amino resin that is synthesized with methanol, formaldehyde and melamine through a special process. It is used in coil coatings and industrial paints. | |
| Mixed Amino Resin 5783 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Mixed Amino Resin 5783 is an amino resin used in interior paint for food packing. | |
| Monomer DCBDA | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer DCBDA is a modified UV monomer used as an intermediate in the coatings industry. | |
| Monomer SM6226 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM6226 is a special tertiary acrylate used as a reactive amine synergist. | |
| Monomer SM623 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM623 is a dual-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM624 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM624 is a dual-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM625 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM625 is a dual-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM625P | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM625P is a dual-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM626 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM626 is a dual-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM627 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM627 is a dual-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM631 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM631 is a tri-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM631E | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM631E is a tri-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM631P | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM631P is a tri-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM632 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM632 is a tri-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM633 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM633 is a tri-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM6338 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM6338 is a special tertiary acrylate used as a reactive amine synergist. | |
| Monomer SM634 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM634 is a tri-functional monomer used as an intermediate in the coatings industry. | |
| Monomer SM6601 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Monomer SM6601 is a modified UV monomer used as an intermediate in the coatings industry. | |
| Novolac Epoxy Resin F-44 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin F-44 is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Novolac Epoxy Resin F-44-50 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin F-44-50 is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Novolac Epoxy Resin F-44-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin F-44-80 is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Novolac Epoxy Resin F-44D | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin F-44D is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Novolac Epoxy Resin F-48 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin F-48 is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Novolac Epoxy Resin F-51 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin F-51 is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Novolac Epoxy Resin F-53 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin F-53 is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Novolac Epoxy Resin SMPN-638 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Novolac Epoxy Resin SMPN-638 is a heat-resistant and strong acid resistant epoxy resin that is widely used in heat-resistant coating grade 5 insulating paint. | |
| Oligomer SM 6103B | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Oligomer SM 6103B is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in coatings, OPV's and flexo and offset inks. | |
| Oligomer SM 6104 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Oligomer SM 6104 is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in OPV's and wood coatings. | |
| Oligomer SM 6104-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Oligomer SM 6104-80 is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in coatings, inks and adhesives. | |
| Oligomer SM 6104Y | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Oligomer SM 6104Y is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in coatings, inks and adhesives. | |
| Oligomer SM 6105-75 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Oligomer SM 6105-75 is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in papers, woods and plastics. | |
| Oligomer SM 6105-80 | Jiangsu Sanmu Group Corporation 江苏三木集团有限公司 | Oligomer SM 6105-80 is an epoxy acrylate oligomer that offers fast cure, high gloss and hardness. It can be used in papers, woods and plastics. |
