| HYDROPALAT® WE 3323 | BASF Formulation Additives 巴斯夫配方助剂 | HYDROPALAT® WE 3323 is a non-ionic, 100% active wetting agent effective in water borne inks, OPV’s, and coatings intended for plastic, wood, and metal substrates. This wetting agent is effective in a wide variety of emulsion types including acrylics, styr...展开 HYDROPALAT® WE 3323 is a non-ionic, 100% active wetting agent effective in water borne inks, OPV’s, and coatings intended for plastic, wood, and metal substrates. This wetting agent is effective in a wide variety of emulsion types including acrylics, styrenated acrylics and PUD’s. HYDROPALAT® WE 3323, in addition to its outstanding wetting properties, does not stabilize foam and can act as a defoamer in many coating and graphic art formulations. In addition, increasing levels of HYDROPALAT® WE 3323 wetting agents typically reduces foam content in coatings rather than increases it, as is typical of most competitive wetting agents. 收起 | |
| HYDROPALAT® WE 3475 | BASF Formulation Additives 巴斯夫配方助剂 | HYDROPALAT® WE 3475 is a highly efficient wetting agent, di-2-ethylhexyl sulphosuccinate, sodium salt. It is a very good wetting agent with only a medium tendency of foam formation in aqueous solutions or in polymer dispersions. The relatively low critica...展开 HYDROPALAT® WE 3475 is a highly efficient wetting agent, di-2-ethylhexyl sulphosuccinate, sodium salt. It is a very good wetting agent with only a medium tendency of foam formation in aqueous solutions or in polymer dispersions. The relatively low critical micelle concentration of approximately 1 g active substance/l and the strong reduction in surface tension of aqueous solutions, even when using low concentrations, make HYDROPALAT® WE 3475 an ideal surface active agent. This product is just slightly water-soluble. The water solubility may be increased by the addition of a small amount of a solubilizer allowing solubility of up to 80 % to be achieved. Diluting HYDROPALAT® WE 3475 with water is possible up to a certain extent, but liquid-crystalline gel type phases may occur in the region of approximately 50 % active substance. 收起 | |
| Hydropalat® WE 3477 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3477 (以前的Hydropalat® 875 PG)是一种高效润湿助剂，包含磺基碳酸酯，钠盐，溶于水/丙二醇 | |
| Hydropalat® WE 3485 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3485 (以前的Hydropalat® 885)是一种润湿剂，适用于水性油漆体系 | |
| Hydropalat® WE 3486 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3486 (以前的Hydropalat® 886)是一种高效浓缩的润湿助剂，适用于水性涂料和印刷油墨 | |
| Hydropalat® WE 3500 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3500 shows excellent surface leveling and substrate wetting while avoiding side effects like cratering, foam stabilization or effects on intercoat adhesion. It is recommended for high-end waterbased Industrial coatings applications. | |
| Hydropalat® WE 3633 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3633 (formerly Hydropalat® AB 30) is an aqueous preparation based on betaine, and a dispersing agent for aqueous systems. | |
| HYDROPALAT® WE 3650 | BASF Formulation Additives 巴斯夫配方助剂 | HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilizat...展开 HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilization. HYDROPALAT® WE 3650 can effectively be used in lacquers or inks that show problems regarding substrate wetting or cratering. Due to its wetting properties the product can also have a positive effect on ink transfer and adhesion. 收起 | |
| Iron Oxide Black | Tongling Rely Technology Co., Ltd. | Iron Oxide Black is an iron oxide pigment that contains saturated blue light black ink with high hiding power, tinting strength, alkali resistance and lightfastness. This product is often used in paint applications. | |
| Iron Oxide Blue | Tongling Rely Technology Co., Ltd. | Iron Oxide Blue is a dark and light blue pigment powder that has an oil absorption of 15-30% and a moisture content of 1%. This product is used for strong and bright coloring in paint and ink applications. | |
| Iron Oxide Brown | Tongling Rely Technology Co., Ltd. | Iron Oxide Brown is an iron oxide pigment with strong adaptability to other iron oxide pigments. This product is used for coloring in paint applications. | |
| Iron Oxide Green | Tongling Rely Technology Co., Ltd. | Iron Oxide Green is a green iron oxide organic pigment made by coupling a variety of additives composite pigments. This product provides strong and bright coloring to colored paint applications. | |
| Iron Oxide Red | Tongling Rely Technology Co., Ltd. | Iron Oxide Red is a red iron oxide and inorganic color pigment that contains high hiding power, strong tinting strength, good dispersibility, light resistance and weather resistance. This product is commonly used in paint applications. | |
| Iron Oxide Yellow | Tongling Rely Technology Co., Ltd. | Iron Oxide Yellow is an iron oxide pigment of relatively stable chemical properties of alkaline oxides. This product provides a pure and bright yellow color of iron with good weather resistance and hiding power. It is commonly used in ink applications. | |
| Liquid Rosin Ester LRE-1 | Resin Chemicals Co., Ltd. | Liquid Rosin Ester LRE-1 is a liquid rosin resin created from gum rosin through esterification with polyol. This product is commonly used in applications such as solvent-based PSA, adhesive tapes, and glue. | |
| Loxanol® CA 5308 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® CA 5308 (以前的Lusolvan® FBH)是一种水性聚合物乳液的成膜助剂 | |
| Loxanol® CA 5330 | BASF Formulation Additives 巴斯夫配方助剂 | 一种基于可再生资源的新型高效成膜助剂，改善了最低成膜温度、摆杆硬度等关键性能指标。用量低于其它的成膜助剂。 | |
| Loxanol® MI 6301 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® MI 6301 (formerly Dehygant® LFM) is an in-can preservative for emulsion paints, emulsions and aqueous pigment pastes. It prevents spoilage by microorganisms during storage. | |
| Loxanol® MI 6430 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® MI 6430 (formerly Texaprint® SKEH) is a monoester of a fatty acid used as a mineral oil replacement in litho inks. It is derived from renewable raw materials and is biodegradable. Loxanol® MI 6430 is used as a replacement of mineral oils in offse...展开 Loxanol® MI 6430 (formerly Texaprint® SKEH) is a monoester of a fatty acid used as a mineral oil replacement in litho inks. It is derived from renewable raw materials and is biodegradable. Loxanol® MI 6430 is used as a replacement of mineral oils in offset inks for food packaging, cleansing agents for printing equipment in litho application, and as a supersolvent in offset varnishes, in order to improve viscosity. 收起 | |
| Loxanol® MI 6840 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® MI 6840 (formerly Basophob® WDS) is a highly concentrated aqueous dispersion of paraffin wax in water. It does increase the hydrophobicity of water based exterior coatings. | |
| Loxanol® OT 5840 | BASF Formulation Additives 巴斯夫配方助剂 | 液体添加剂，以容易添加混合的乳液形式供应。它延长了开罐可使用时间，可减少乳胶漆、有机金属硅酸盐和硅树脂基灰泥的开裂 | |
| Loxanol® OT 5843 | BASF Formulation Additives 巴斯夫配方助剂 | 浆状储存稳定剂，用于延长建筑装饰乳胶漆的开罐可使用时间，并具有高活性剂含量 | |
| Loxanol® OT 5846 | BASF Formulation Additives 巴斯夫配方助剂 | 用于乳液装饰涂料中的延长开膜时间的助剂，液膏状并且储存稳定性高易于处理。 | |
| Loxanol® OT 5853 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® OT 5853 is an additive to prolong the ‘open time’ and workability of latex-based plasters for exterior insulation and finishing systems (EIFS) with high active content and improved storage stability. | |
| Loxanol® PL 5060 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® PL 5060 (以前的Plastilit® 3060) 是一种水性聚合物乳液用高效增塑剂，适用于高光油漆、弹性涂料和木器涂料。 Loxanol® PL 5060具有出色的优点，例如高效增塑效果，无VOC和非常低的气味 | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...展开 Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. 收起 | |
| R-1 Rutile Powder | CPM Industries, Inc. | R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceram...展开 R-1 Rutile Powder is a non-pigment rutile titanium dioxide powder that exhibits relatively high surface area. This product is a 99.0% minimum purity powder with a mean particle size of 3 to 5 microns. It is ideal for use in the production of electro-ceramics, specialty glass, fiberglass, engineered ceramics, and coated welding rods. 收起 | |
| R-500 Rutile Pigment | CPM Industries, Inc. | R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, ...展开 R-500 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for application in water and solvent based systems requiring limited weathering resistance.This product is often used in applications including interior coatings, road marking paint, and powder coatings. It is a multipurpose pigment with a 98% minimum TiO2 content and no surface treatment. 收起 | |
| R-501 Rutile Pigment | CPM Industries, Inc. | R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment t...展开 R-501 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness, hiding power, and limited weathering resistance in trade sales paint and road marking paint. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in solvent based systems. 收起 | |
| R-502 Rutile Pigment | CPM Industries, Inc. | R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface ...展开 R-502 Rutile Pigment is a rutile titanium dioxide pigment that provides good whiteness and hiding power with applications in water based enamel paints requiring limited weathering resistance. This product contains 98% minimum TiO2 plus an organic surface treatment to ease dispersion in water based systems. 收起 | |
| R-601 Rutile Pigment | CPM Industries, Inc. | R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorgani...展开 R-601 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in solvent based printing inks, powder coatings, and exterior coatings. This product is a multipurpose pigment with a 93% minimum TiO2 content plus alumina and silica inorganic and amphiphilic organic surface treatments. 收起 | |
| R-602 Rutile Pigment | CPM Industries, Inc. | R-602 Rutile Pigment is a rutile titanium dioxide pigment that is ideal for use in water based paints. This product contains 93% minimum TiO2 with silica and alumina inorganic and hydrophilic organic surface treatments. | |
| R-606 Rutile Universal Pigment | CPM Industries, Inc. | R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for s...展开 R-606 Rutile Universal Pigment is a rutile titanium dioxide pigment that is ideal for application in paints, coatings and inks. This product contains 93% minimum TiO2 plus aluminum and zirconium surface treatments. It is a universal pigment designed for superior durability and stability, high gloss and opacity, and excellent dispersibility. 收起 | |
| R-730 TiO2 | Boom Industry (SH) Co., Ltd. | R-730 TiO2 is a stable universal rutile titanium dioxide used for its versatility, durability, hiding power and gloss. This product can be applied to senior industrial coating that requires high weather resistance, paints and inks. | |
| R-750 TiO2 | Boom Industry (SH) Co., Ltd. | R-750 TiO2 is a general-purpose product created through a sulfuric acid production process. This product has good dispersion, hiding power, weather resistance and other characteristics. It is commonly used in interior and exterior paints and inks. | |
| R-760 TiO2 | Boom Industry (SH) Co., Ltd. | R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, print...展开 R-760 TiO2 is a general-purpose rutile titanium dioxide than can be easily scattered, moistened or mixed with other resins. This product provides weather resistance, hiding power, anti-chalking property and yellowing resistance in industrial paints, printing inks and different kinds of coatings. 收起 | |
| R-98 TiO2 | Boom Industry (SH) Co., Ltd. | R-98 TiO2 is a chlorination rutile pigment derived from chlorination and oxidation of silicon. This product has good weather resistance, excellent stability and high dispersibility. It is commonly used in coatings and printing inks. | |
| Refined Gum Rosin | Resin Chemicals Co., Ltd. | Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical act...展开 Refined Gum Rosin is a natural resin composed of resin acids that is easily dissolved in numerous organic solvents. It is a light colored, transparent solid in appearance with a softening point of 76°C. This product is used to provide special chemical activity in the production of coatings, inks, and rosin ester resins. 收起 | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...展开 Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...展开 Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...展开 Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...展开 Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...展开 Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. 收起 | |
| RHEOVIS® AS 1125 NA | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic (low-shear) flow behavior. It is recommended for many aqueous paint and coating systems. It offers performance highlights such as excellent thickening efficiency, in...展开 RHEOVIS® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic (low-shear) flow behavior. It is recommended for many aqueous paint and coating systems. It offers performance highlights such as excellent thickening efficiency, increased KU-viscosity, prolonged open time, reduced sagging, high yield point, lower water uptake, and excellent viscosity stability after tinting. 收起 | |
| RHEOVIS® AS 1130 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® AS 1130 is a derivative of a family of highly effective rheology-control thickeners for a wide range of water-based coatings. The polymer provides the rheological control effect through extensive swelling of the high molecular weight polymer in a...展开 RHEOVIS® AS 1130 is a derivative of a family of highly effective rheology-control thickeners for a wide range of water-based coatings. The polymer provides the rheological control effect through extensive swelling of the high molecular weight polymer in alkali, in the presence of water. Use of these thickening and rheological control agents allows formulation of coatings with an advantageous thixotropic behavior giving non stringy formulations which are easy to apply over a wide range of speeds and/or processes. Such formulations are ideally suited for airless spray applications for industrial and automotive formulations, and it can also be used in pigment and filler slurries. It offers additional performance highlights such as high shear thinning and anti-sagging and settling. 收起 | |
| RHEOVIS® AS 1337 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® AS 1337 is an effective rheological control agent for water-borne systems. It is designed to improve the Newtonian rheological properties over a wide shear rate interval without exhibiting any significant thixotropic effect. Thus, RHEOVIS® AS 133...展开 RHEOVIS® AS 1337 is an effective rheological control agent for water-borne systems. It is designed to improve the Newtonian rheological properties over a wide shear rate interval without exhibiting any significant thixotropic effect. Thus, RHEOVIS® AS 1337 allows formulation of high gloss paint systems with optimal flow properties for manual application techniques. This white liquid is a formulation based on an acrylic copolymer. Typical end-use applications include: glossy emulsion paints for household paints and glossy, low duty industrial paints. Since RHEOVIS® AS 1337 is a synthetically derived product it is less susceptible to microbiological attack than derivatives of cellulose. Consequently the paint formulator can substantially reduce the level of biocide leading to a broader area of application. RHEOVIS® AS 1337 is most effective over the pH range 7.5 – 10.5. 收起 | |
| Rheovis® AS 1956 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® AS 1956 (以前的Collacral® DS 6256) 是一种增稠剂，适合聚合物分散体和其它水性体系，以粉末形式供应 | |
| RHEOVIS® HS 1152 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® HS 1152 is a derivative of a family of highly effective rheological control additives for water-borne coating systems. It is based on acrylic polymer technology with side groups designed to provide an associate thickening mechanism. RHEOVIS® HS 1...展开 RHEOVIS® HS 1152 is a derivative of a family of highly effective rheological control additives for water-borne coating systems. It is based on acrylic polymer technology with side groups designed to provide an associate thickening mechanism. RHEOVIS® HS 1152 is the most efficient thickening additive leading to a more pseudoplastic system, for example spray applications. The practical use in conventional coatings might be limited to applications where flow and leveling are less critical. 收起 | |
| RHEOVIS® HS 1162 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® HS 1162 is an outstanding extreme low-shear to thixotropic thickener and rheology-control agent for aqueous coatings. | |
| Rheovis® HS 1169 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® HS 1169 (以前的Latekoll® DS 6269)是一种高效、憎水改性的丙烯酸增稠剂（HASE），具有显著的假塑性（低剪切力）流变行为 | |
| RHEOVIS® HS 1212 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® HS 1212 provides an improved thickening effect at low shear rates compared with RHEOVIS® HS 1332. It is recommended for use in matt and semi-gloss coatings. It is based on acrylic polymer technology with side groups designed to provide an associa...展开 RHEOVIS® HS 1212 provides an improved thickening effect at low shear rates compared with RHEOVIS® HS 1332. It is recommended for use in matt and semi-gloss coatings. It is based on acrylic polymer technology with side groups designed to provide an associate thickening mechanism. 收起 | |
| RHEOVIS® HS 1332 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® HS 1332 is a an excellent rheology-control thickener of water based coatings to increase viscosity in the mid- to high-shear range. It is a hydrophobic modified acrylic swellable copolymer emulsion (HASE) in water. The polymer provides the rheolo...展开 RHEOVIS® HS 1332 is a an excellent rheology-control thickener of water based coatings to increase viscosity in the mid- to high-shear range. It is a hydrophobic modified acrylic swellable copolymer emulsion (HASE) in water. The polymer provides the rheology-control effect through extensive swelling of the high-molecular-weight polymer in combination with a hydrophobic component in alkali, in the presence of water. 收起 | |
| RHEOVIS® PE 1331 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® PE 1331 is a solvent-free, VOC-Free, low odor associative thickener specifically designed to give a Newtonian rheology profile and excellent balance of performance properties to premium flat, eggshell, semi-gloss and gloss coatings. This product ...展开 RHEOVIS® PE 1331 is a solvent-free, VOC-Free, low odor associative thickener specifically designed to give a Newtonian rheology profile and excellent balance of performance properties to premium flat, eggshell, semi-gloss and gloss coatings. This product is excellent for high shear viscosity build for one-coat coverage while enhancing low shear performance for superior sag resistance. RHEOVIS® PE 1331 imparts excellent flow and leveling due it’s comb-polymer structure and belongs to a family of polyether thickeners shown to have excellent exterior durability 收起 | |
| Rheovis® PU 1190 | BASF Formulation Additives 巴斯夫配方助剂 | 高效的, 非离子的流变助剂, 具有在低剪力下高增稠的能力, 形成假塑粘度。 | |
| RHEOVIS® PU 1191 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® PU 1191 is a heavy metal-, solvent- and VOC free solution of a polyurethane in water/diluent. Heavy metal catalysts are not part of the product’s formulation. RHEOVIS® PU 1191 is highly-efficient environmental friendly associative polyurethane th...展开 RHEOVIS® PU 1191 is a heavy metal-, solvent- and VOC free solution of a polyurethane in water/diluent. Heavy metal catalysts are not part of the product’s formulation. RHEOVIS® PU 1191 is highly-efficient environmental friendly associative polyurethane thickener designed to achieve a high pseudoplastic viscosity compared to other PUR thickeners. It shows superior sag resistance, low viscosity drop on tinting and excellent chemical- and UV-stability. Moreover, RHEOVIS® PU 1191 supports film formation and pigment wetting for minimizing pigment settling. Additionally, RHEOVIS® PU 1191 allows for an easy incorporation with low shear power (easy handling). 收起 | |
| RHEOVIS® PU 1214 NC | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® PU 1214 NC is a non-ionic rheology additive for aqueous systems. It is a polyurethane-based associative thickener that shows thickening with only low shear thinning. It was especially designed to improve the application and hiding properties of l...展开 RHEOVIS® PU 1214 NC is a non-ionic rheology additive for aqueous systems. It is a polyurethane-based associative thickener that shows thickening with only low shear thinning. It was especially designed to improve the application and hiding properties of latex systems (emulsion paints and adhesives). RHEOVIS® PU 1214 NC is recommended for all paints where good rheological properties are important. The main applications are interior and exterior paints which require good brush and roller application properties 收起 | |
| Rheovis® PU 1216 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® PU 1216 (以前的DSX® 1516)是一种非离子型中等假塑性流变改性剂，适用于水性涂料。它为水性体系提供假塑性行为。它可成膜并对颜料具有良好的亲合力。增稠与pH值无关。该产品适合用于增稠和改进水性体系的流平性能（例如丙烯酸共聚物、醋酸乙烯均聚物、丙烯酸聚合物、PVAc-VC共聚物、聚氨酯、胺中和和乳化的体系）以及基于聚合物基料的产品例如乳胶漆、纹理表面、高光乳胶漆、水性腻子、胶粘剂和防腐底漆 | |
| RHEOVIS® PU 1250 NC | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® PU 1250 NC is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow pr...展开 RHEOVIS® PU 1250 NC is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow properties of waterborne polymers and other aqueous systems as well as for finished products like coatings and putties. These properties can be achieved in all kind of emulsions based on e.g. acrylic copolymer, vinyl acetate homopolymer, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine neutralized and emulsified systems. It is a mid-shear thickener with medium pseudoplasticity. 收起 | |
| RHEOVIS® PU 1251 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® PU 1251 is an extremely efficient, solvent-free non-ionic, associative rheology modifier designed to improve dry coating performance and appearance while improving application properties of latex based coatings and adhesives. It features built-in...展开 RHEOVIS® PU 1251 is an extremely efficient, solvent-free non-ionic, associative rheology modifier designed to improve dry coating performance and appearance while improving application properties of latex based coatings and adhesives. It features built-in wetting/coalescing agents that improve compatibility and ease of incorporation into formulations. It is a mid-shear thickener with slight pseudoplasticity. 收起 | |
| Rheovis® PU 1256 | BASF Formulation Additives 巴斯夫配方助剂 | 非离子的, 无溶剂用于水性涂料的流变剂, 溶于水/稀释物的聚氨酯溶液 | |
| Rheovis® PU 1270 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® PU 1270 (以前的Collacral® PU 70)是一种非离子型流变助剂，适用于水性体系。Rheovis® PU 1270是一种杰出的假塑性中等剪切增稠剂和流变控制剂，适用于水性涂料 | |
| Rheovis® PU 1280 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® PU 1280 (以前的Collacral® PU 80)是一种非离子型流变助剂，适用于水性体系，低剪切变稀。Rheovis® PU 1280是一种杰出的假塑性中等剪切增稠剂和流变控制剂，适用于水性涂料 | |
| Rheovis® PU 1291 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® PU 1291 (以前的DSX® 3801)是一种非离子型、不含VOC的中等剪切流变改性剂，适用于水性涂料和胶粘剂。它不含溶剂、重金属和锡、也不含烷基酚聚氧乙烯醚。该产品是一种中等剪切聚氨酯增稠剂，带多种共用元素。由于它的创新化学结构，即使在低添加量下，ICI粘度明显超越了基准含溶剂和水性产品，因而可改善性能，增加可持续发展性（例如更少添加获取更多）。 该产品具有出色的流平性和光泽。此外，Rheovis® PU 1291表现出更好的颜色接受度。黄色液体非常适合环保性内外墙乳胶漆以及...展开 Rheovis® PU 1291 (以前的DSX® 3801)是一种非离子型、不含VOC的中等剪切流变改性剂，适用于水性涂料和胶粘剂。它不含溶剂、重金属和锡、也不含烷基酚聚氧乙烯醚。该产品是一种中等剪切聚氨酯增稠剂，带多种共用元素。由于它的创新化学结构，即使在低添加量下，ICI粘度明显超越了基准含溶剂和水性产品，因而可改善性能，增加可持续发展性（例如更少添加获取更多）。 该产品具有出色的流平性和光泽。此外，Rheovis® PU 1291表现出更好的颜色接受度。黄色液体非常适合环保性内外墙乳胶漆以及水性木器、工业和地板涂料，胶粘剂，树脂基灰泥，水性防腐漆和印刷油墨 收起 | |
| Rheovis® PU 1331 | BASF Formulation Additives 巴斯夫配方助剂 | 又一款聚氨酯的水溶液，不含重金属、溶剂，不含其他可挥发物质。作为增稠剂，具有牛顿力学流变性，在平光，半光或全光涂料配方体系中都体现出优异的综合性能。 | |
| Rheovis® VP 1231 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® VP 1231 (formerly Collacral® VAL) s a thickener for polymer dispersions and other aqueous systems. It can also be used as a protective colloid if resin solutions are mixed with polymer dispersions. | |
| Rosin Modified Maleic Resin MR-130 | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is u...展开 Rosin Modified Maleic Resin MR-130 is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 3-4. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR-130D | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is ...展开 Rosin Modified Maleic Resin MR-130D is a raw material that is esterified by the addition of gum rosin, maleic anhydride, glycerol or pentaerythritol. It is transparent to pale yellow flakes in appearance with a Gardner grade color of 5-8. This product is used to provide light color production and retention in nitrocellulose lacquers and inks. 收起 | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...展开 Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. 收起 | |
| Rosin Modified Phenolic Resin PI116 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI116 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI118 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI118 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2000-2800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI136 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI136 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1600-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI138 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI138 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 2400-3200 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI142 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI142 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1500-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI145 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used...展开 Rosin Modified Phenolic Resin PI145 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 500-900 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI146 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI146 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1300-1800 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI147 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI147 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 5500-8500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI148 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI148 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3500-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI149 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI149 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3000-4500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI152 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI152 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 3800-5000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI155 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly us...展开 Rosin Modified Phenolic Resin PI155 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 1800-2500 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Phenolic Resin PI160 | Resin Chemicals Co., Ltd. | Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly ...展开 Rosin Modified Phenolic Resin PI160 is a condensed product of phenol, rosin, and formaldehyde that is esterified by glycerol. It has a viscosity of 10000-14000 at 35°C and can be easily mixed with linseed or other vegetable oils. This product is commonly used to provide solubility, a high softening point, hardness, high gloss, and fast drying in planographic offset printing inks. 收起 | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...展开 Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...展开 Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...展开 Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...展开 Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...展开 Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 105 | Resin Chemicals Co., Ltd. | Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 105 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 100-110°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 115 | Resin Chemicals Co., Ltd. | Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the...展开 Terpene Resin 115 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 110-120°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 85 | Resin Chemicals Co., Ltd. | Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the ma...展开 Terpene Resin 85 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 80-90°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Terpene Resin 95 | Resin Chemicals Co., Ltd. | Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the m...展开 Terpene Resin 95 is a raw material created from aluminum trichloride and α-Pinene that appears as a pale yellow, transparent solid. It has a softening point of 90-100°C and contains a maximum impurity level of 30ppm. This product is commonly used in the manufacturing of hot melt adhesives, pressure sensitive adhesives, and glue. 收起 | |
| Thermoplastic Road Marking Resin RM-100 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 97-103°C. 收起 | |
| Thermoplastic Road Marking Resin RM-105 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 102-108°C. 收起 | |
| Thermoplastic Road Marking Resin RM-110 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...展开 Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 107-113°C. 收起 | |
| Thermoplastic Road Marking Resin RM-95 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This prod...展开 Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 92-98°C. 收起 | |
| Turpentine Oil 1st | Resin Chemicals Co., Ltd. | Turpentine Oil 1st is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.88. This product is commonly used in the manufacturing of applications such as coating...展开 Turpentine Oil 1st is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.88. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| Turpentine Oil Super | Resin Chemicals Co., Ltd. | Turpentine Oil Super is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.87. This product is commonly used in the manufacturing of applications such as coati...展开 Turpentine Oil Super is pinene with special chemical composition that is primarily used as a solvent. It is transparent in appearance with a maximum relative density of 0.87. This product is commonly used in the manufacturing of applications such as coatings, synthetic camphor, synthetic resin, and organic industrial products. 收起 | |
| Waterborne Emulsion Rosin Ester WBE138 | Resin Chemicals Co., Ltd. | Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It c...展开 Waterborne Emulsion Rosin Ester WBE138 is a unique waterborne tackifier that combines high solids content and high adhesion performance and stability at high speed. This product is commonly used in applications such as water-based adhesives and glue. It can provide aggressive tack and peel, and give a unique balance of room temperature and low temperature adhesion in pressure sensitive adhesives. 收起 |
