| Advantage™ AM1512A | Ashland | Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packagin...展开 Advantage™ AM1512A is a 100% active foam control agent designed specifically for use in water-based paint systems. It is a high efficiency, hydrocarbon oil-based antifoaming agent and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH and it is effective in the presence of many surfactants. Advantage™ AM1512A foam control agent is readily dispersible, has an outstanding long-term foam control persistency, and Advantage™ AW8176 defoamer is readily dispersible, has very good long-term persistency, and it is recommended for architectural paints, emulsions plasters, pigment/filler slurries, as well as industrial wood coatings. 收起 | |
| Aquaflow™ NHS-300 | Ashland | Aquaflow™ NHS-300 is a rheology modifier for waterborne architectural coatings. A solvent-free, nonionic associative polymer solution designed to increase high-shear viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Aquaflow™ NHS-355 | Ashland | Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...展开 Aquaflow™ NHS-355 rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build, and favorable brush drag. As an APEO-free and solvent-free product, Aquaflow™ NHS-355 rheology modifier is recommended for low VOC formulations. It is supplied as a low viscosity liquid for ease of handling. The performance of the product is independent of paint pH 收起 | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener prov...展开 Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings, and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. 收起 | |
| Aquaflow™ NLS-200 | Ashland | Aquaflow™ NLS-200 is a rheology modifier for waterborne architectural coatings. A nonionic associative polymer solution designed to build stormer viscosity and provide superior flow and leveling in latex paints. | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220 | Ashland | Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including v...展开 Aquaflow™ NLS-220 is a solvent free nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. It can be used with a wide variety of binder chemistries including vinyl acrylics, ethylene vinyl acetates, alkyd emulsions and in particular pure acrylics and styrene acrylics. It rapidly equilibrates to target low- or mid-shear viscosity with no negative impact on gloss or color stability. 收起 | |
| Aquaflow™ NMS-450 | Ashland | Aquaflow™ NMS-450 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...展开 Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. 收起 | |
| Aquaflow™ XLS-500 | Ashland | Aquaflow™ XLS-500 is non-ionic synthetic associative rheology modifier for low-VOC acrylic based paints & coatings. | |
| Aquaflow™ XLS-525 | Ashland | Aquaflow™ XLS-525 is a non-ionic synthetic associative rheology modifier for low-VOC paints and coatings. | |
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...展开 Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. 收起 | |
| Dextrol™ OC-110 | Ashland | Dextrol™ OC-110 is the free-acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-15 | Ashland | Dextrol™ OC-15 is the free acid form of a nonyl phenol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-180 | Ashland | 它是一种乙氧基化脂肪醇磷酸酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS表面活性剂是乙氧基脂肪醇磷酸酯的中和（钠盐）形式。它设计用于改善光泽度和在水性乳胶漆中的色彩接受度。根据配方的不同特点，这款产品还可以用作有助于减少颜料凝絮的补充分散剂。除了在乳胶漆中使用，Dextrol™ OC-180HS表面活性剂还可以提供普遍着色特性，有助于分散和稳定颜料，从而改善水基油漆的色彩接受度。 | |
| Dextrol™ OC-50 | Ashland | Dextrol™ OC-50 is the neutralized (sodium salt) form of a nonyl phenol ethoxylated phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. 收起 | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...展开 Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. 收起 | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...展开 Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...展开 Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. 收起 | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...展开 Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. 收起 | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...展开 Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. 收起 | |
| Epoxy Curing Agent RD-200 | Anshan Runde Fine Chemicals Co., Ltd. | Epoxy Curing Agent RD-200 is a water-based epoxy curing agent that is a yellowish transparent liquid used to emulsify liquid epoxy resin. This product has the ability to cure at room or low-baking temperature and features water and alkali resistance. It f...展开 Epoxy Curing Agent RD-200 is a water-based epoxy curing agent that is a yellowish transparent liquid used to emulsify liquid epoxy resin. This product has the ability to cure at room or low-baking temperature and features water and alkali resistance. It finds application in sealers, primers, block fills, masonry coatings, and regular or low temperature bake primers and enamels. 收起 | |
| Ftalon 27/70 ABT | Galstaff Multiresine S.p.A. | Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film har...展开 Ftalon 27/70 ABT is a saturated polyester that acquires the following properties if combined with proper isocyanates: fast dust-free, excellent solvent flash-off, fast drying-time, yellowing resistance, excellent mechanical resistance and surface film hardness (panels can be stacked after 24hrs). 收起 | |
| Ftalon 34/60X | Galstaff Multiresine S.p.A. | Ftalon 34/60X provides good film curing, even with reduced quantity of isocyanates. The cured film is hard, but should be plasitized with Ftalon 42 or 43. Ftalon 34/60X is suitable for nitro varnishes for wood. | |
| Ftalon 45/75 AET 2K-PU saturated polyester | Galstaff Multiresine S.p.A. | Ftalon 45/75 AET 2K-PU is a saturated polyester with fast solvent release for 2K-PU coatings. Ftalon 45's low viscosity allows to formulate high solid coatings with good hardening. | |
| Ftalon TAC | Galstaff Multiresine S.p.A. | Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This prod...展开 Ftalon TAC is a high quality polyester that combines the main charcteristics of hydroxylated acrylic resins and hydroxilated polyester resins, for the preparation of 2K-PU coatings. Ftalon TAC is suitable for car refinishing, industry and wood. This product has good resistance to yellowing and the outdoors, gloss retention and extremely low color. 收起 | |
| Ftalon TN/100 | Galstaff Multiresine S.p.A. | Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to ...展开 Ftalon TN/100 is a polyol with good flexibility and it's OH groups react at room temperature and at 45°-50°C. This resin offers high cross-linking speed with isocyanates, but it is particularly suitable for cross-linking with aliphatic isocyanates. Do to it's excellent resistance, Ftalon TN/100 is suitable for marine applications. 收起 | |
| Gloss Agent RD-702 | Anshan Runde Fine Chemicals Co., Ltd. | Gloss Agent RD-702 is a gloss agent that appears as white granules. This product is used to provide high gloss and surface smoothness, correct imperfections such as craters, pinholes and eye-fishes, improve dispersion of pigments and fillings, and wet the...展开 Gloss Agent RD-702 is a gloss agent that appears as white granules. This product is used to provide high gloss and surface smoothness, correct imperfections such as craters, pinholes and eye-fishes, improve dispersion of pigments and fillings, and wet the substrate and surface leveling. It finds application in powder coatings and can be pre-blended with other powder coating ingredients. 收起 | |
| Glycoluril Crosslinker RD-T1174 | Anshan Runde Fine Chemicals Co., Ltd. | Glycoluril Crosslinker RD-T1174 is a glycoluril crosslinker that is a pale white to yellowish powder. This product is used to provide excellent weather resistance, overbake resistance, and anti-yellowing properties. It finds application in flat and textur...展开 Glycoluril Crosslinker RD-T1174 is a glycoluril crosslinker that is a pale white to yellowish powder. This product is used to provide excellent weather resistance, overbake resistance, and anti-yellowing properties. It finds application in flat and textured film styles and finishes. 收起 | |
| HC-Poloral P 100/S | Galstaff Multiresine S.p.A. | HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV r...展开 HC-Poloral P 100/S is an unsaturated polyester for spraying or curtain machine coatings and offers perfectly clear, colourless films without green shade. It may be used for the production of pigmented polyesters and may be added to UV co-polymers for UV roller basecoats. This product has excellent stability, although it's high reactivity. 收起 | |
| Italester 205 | Galstaff Multiresine S.p.A. | Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude...展开 Italester 205 is a hydroxylated polyester for can coatings in combination with Itamin (M and BG) resins or with blocked isocyanates (Uronal BN 75). Italester 205 is more flexible than Italester 203 and has a good adhesion sterilization resistance on crude steel, galvanized and on aluminum. It complies with European legislation for indirect food contract (Swiss Ordinance RS 817.023.21 Annexx 6, Part A or B). 收起 | |
| Italester 218 SND | Galstaff Multiresine S.p.A. | Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for alum...展开 Italester 218 SND is a saturated polyester suitable for sealers or OPV for can coatings in combination with benzoguanamine or melamine resins (Itamin M and BG). It is also suitable for coatings for coils (appliances, metallic structures or primer for aluminum). Italester 218 SND provides excellent chemical resistance and flexibility in combination with HMMM resins (Itamin HM). 收起 | |
| Italester H27 | Galstaff Multiresine S.p.A. | Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retensio...展开 Italester H27 is an isophtalic polyester suitable for water soluble primer and top-coats for packaging and stoving systems with the following characteristics: high reactivity, good hardness, good mechanical and chemical resistance and good colour retension. 收起 | |
| Italester MX 353 | Galstaff Multiresine S.p.A. | Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemica...展开 Italester MX 353 is a saturated polyester for "soft touch" 2K-PU coatings for plastics (ABS, PVC, PS, PMMA, PET, etc.), metal and wood with primer. The main characteristics of Italester MX 353 include high thickness film, high flexibility and good chemical resistances. 收起 | |
| Italkid 268 | Galstaff Multiresine S.p.A. | Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for th...展开 Italkid 268 is a hydroxylated polyester suitable for the preparation of 2K-PU systems where following charcteristics are requested: hardness, anti-scratch, toughness, non-yellowing, brightness, film transparency and colour retention. It is suitable for the preparation of polyurethane lacquers for wood. 收起 | |
| Italkid 312 F | Galstaff Multiresine S.p.A. | Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Ur...展开 Italkid 312 F is a hydroxylated polyester used for 2K-PU coatings, to be applied on : leather, rubber, wood and metal. It is usually used with Italkid 308 or 311 in combination with aromatics isocyanates (Uronal P75 N. ST., Uronal RB 60) or aliphatics (Uronal NL, Uronal NL 100). 收起 | |
| Italkid F 51 P | Galstaff Multiresine S.p.A. | Italkid F 51 P is an alkid resin for pigmented pastes that are organic or inorganic. It is suitable for pastes with good wetting properties, high pigment yield and colorimetric stability. | |
| Italkid KR 543 | Galstaff Multiresine S.p.A. | Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent ...展开 Italkid KR 543 is a short-oil alkyd resin, castor-oil and vegetable fatty acid modified, used for 2K-PU coatings for wood both for primers and mat finishes. It's main characteristics are fast hardening, good coverage, hardness and toughness, good solvent release and long pot-life. 收起 | |
| Italkid MR 950 | Galstaff Multiresine S.p.A. | Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thi...展开 Italkid MR 950 is a medium-oil alkyd resin, used for the preparation of air-drying glossy and matt enamel, both for outdoor and indoor applications. This product has flexibility, a high percentage of pigments and fillers is allowed. It is suitable for thick layer, in vertical applications. 收起 | |
| Itamin BG 142 | Galstaff Multiresine S.p.A. | Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and ...展开 Itamin BG 142 is a benzoguanamine/formaldehyde resin suitable for coil coatings with excellent wetting pigments property and high gloss. This product is suitable for stoving enamels with overbaking resistance and without gloss retention and yellowing and is more flexible than BG 141. 收起 | |
| Itamin M 172 | Galstaff Multiresine S.p.A. | Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyest...展开 Itamin M 172 is a highly reactive melamine suitable for stoving enamels, in combination with short-oil alkyd resin, even at low temperature (80-120°C). It is also suitable for can and coil coatings, thanks to it's good compatibility with saturated polyesters. Itamin M 172 provides high brightness and good flow, good sterilization and chemical resistance, high reactivity and low free formaldehyde. 收起 | |
| Itamin U 34 | Galstaff Multiresine S.p.A. | Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood fl...展开 Itamin U 34 is a urea/formaldehyde resin suitable in combination of short-oil alkyd resins, saturated polyesters and epoxy enamels for metal. It is also suitable for can coatings, metallic furniture and acid-curing varnishes for wood furniture and wood floors. Itamin U 34's main features are: fast reactivity, long shelf life, low formaldehyde release and very good flow. 收起 | |
| Itamin URP 91 | Galstaff Multiresine S.p.A. | Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and t...展开 Itamin URP 91 is an internally plastified urea/formaldehyde resin used for matt or gloss acid curing enamels for wood and metal. Finished products formulated with Itamin URP 91 are characterized by low free formaldehyde, high solid, high flexibility and toughness, fast hardening, with weak acids and good mechanical,chemical and abrasion resistance. 收起 | |
| Leveling Agent RD-701 | Anshan Runde Fine Chemicals Co., Ltd. | Leveling Agent RD-701 is a light yellow viscous liquid that functions as a polyacrylate leveling agent. This product is able to employ superfine and high dispersant silica as its carrier. It finds application in powder coatings to correct surface imperfec...展开 Leveling Agent RD-701 is a light yellow viscous liquid that functions as a polyacrylate leveling agent. This product is able to employ superfine and high dispersant silica as its carrier. It finds application in powder coatings to correct surface imperfections such as craters, pinholes, and eye-fishes, and to obtain surface flow. 收起 | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B HEC，非离子型水溶性聚合物，是一种白色，自由流动的粒状粉末。它不溶于有机溶剂，但它很容易分散在冷水和热水中，得到不同粘度的溶液。此产品被用作增稠剂，保护胶体，基料，稳定剂和助悬剂，特别是应用于的需要非离子型材料的场合。 | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ FPS Plus 330 | Ashland | Natrosol™ FPS Plus 330 is a aqueous dispersions of cellulosic water-soluble polymers for use as latex paint thickeners. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ hydroxyethylcellulose (HEC) 在过去的50年中始终是行业内领先的水基建筑涂料增稠剂。而现在Natrosol Performax HEC允许涂料生产商在涂料生产的任意时间点添加干燥形式的HEC而不会产生结块，这一特性将涂料制造过程中的灵活性和产品质量带到了一个史无前例的水平。 | |
| Natrosol™ Plus | Ashland | Natrosol™ Plus is a associative cellulosic polymer designed specifically for use in latex paints. | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...展开 Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. 收起 | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...展开 Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. 收起 | |
| pHLEX™ 100 | Ashland | pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 100 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 100 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| pHLEX™ 110 | Ashland | pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...展开 pHLEX™ 110 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 110 neutralizing agent, particularly when used in place of ammonium hydroxide. 收起 | |
| Poloral G 650 | Galstaff Multiresine S.p.A. | Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usua...展开 Poloral G 650 is a highly reactive allylic unsaturated polyester formulated for UV and Redox applications. Clear or pigmented coatings with excellent body, flow and outstanding sanding and polishing can be obtained with Poloral G 650. This product is usually used for both glossy and matt UV topcoats with smooth, clear and hard surface. 收起 | |
| Poloral K 128 | Galstaff Multiresine S.p.A. | Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and ma...展开 Poloral K 128 is a not pre-accelerated unsaturated polyester, dissolved in Styrene, with a medium viscosity. The main applications are the preparations of putties and mastics, for sticking or repairing surface defects of natural or synthetic stones and marbles. The curing time hardness and the adhesion are peculiar characteristics of Poloral K 128, even at low temperature. 收起 | |
| Poloral UV 92/85 ABT | Galstaff Multiresine S.p.A. | Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding seal...展开 Poloral UV 92/85 ABT is a highly reactive, UV - curable unsaturated polyester for free styrene systems with outstanding UV reactivity. It is the most suitable product for wood coatings. Poloral UV 92/85 ABT is largely used also for UV-curable sanding sealer, to be applied by curtain coater. 收起 | |
| PVP K-120 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于金属淬火浴。 | |
| PVP K-15 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑。可用于清洁剂中抑制染料迁移，用于平板印刷中增强油墨的憎水性。 | |
| PVP K-30 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| PVP K-60 | Ashland | 聚乙烯基吡咯烷酮，认为是生理学惰性的，可用水和大多数常用有机增塑剂增塑 | |
| PVP K-90 | Ashland | 惰性的聚乙烯吡咯烷酮，可被水及大部分常见的有机增塑剂增塑，用途广泛。 | |
| Sintal A 213 | Galstaff Multiresine S.p.A. | Sintal A 213 is an alkyd resin used for the formulation of high solid stoving enamels thanks to it's easy thinning. It can be used in combination with Sintal R 254 to have better flexibility and can also be used for clear or pigmented nitro systems. | |
| Sintal G 63/70 RM | Galstaff Multiresine S.p.A. | Sintal G 63/70 RM is largely used to prepare white enamels for buildings. This product shows an excellent yellowing resistance. For indoor use, it is often mixed with Sintal S50/50 RM to improve dust-free (30'-40') and hardening speed. | |
| Sintal L45/60 X | Galstaff Multiresine S.p.A. | Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for w...展开 Sintal L45/60 X is an alkyd resin with fast drying time, high mechanical and moisture resistance and good wetting property. It is suitable for antirust primer, gloss enamels for industry mixed with chlorinated rubber. This product is not recommended for white or light color. 收起 | |
| Sintal R 05/60X | Galstaff Multiresine S.p.A. | Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good...展开 Sintal R 05/60X is a modified alkyd resin with the following characteristics: excellent adhesion on metal, fast dust-free and touch-free. It's main applications are antirust basecoats for steel pieces, matt and gloss enamels with fast drying time and good solvents resistance. clear nitro sanding sealers for wood, colorants and inks for wood. 收起 | |
| Sintal S 380/60 T | Galstaff Multiresine S.p.A. | Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for st...展开 Sintal S 380/60 T is an air-drying resin for high quality road-marking paints. It's main characteristics include high adhesion and resistance, excellent colour retention and fast drying time. Sintal S 380/60 T is suitable for air-drying enamels and for stoving materials in combination with urea or melamine resins. 收起 | |
| Solid Acrylic Resin RDA-150 | Anshan Runde Fine Chemicals Co., Ltd. | Solid Acrylic Resin RDA-150 is an acrylic acid polymer that has an acid content between 145 and 155 mg KOH/g. This product functions as a high durable exterior carboxyl binder, matting hardener and matting agent that can be used in powder coatings. | |
| Solid Acrylic Resin RDA-170 | Anshan Runde Fine Chemicals Co., Ltd. | Solid Acrylic Resin RDA-170 is an acrylic acid polymer that has an acid content between 165 and 175 mg KOH/g. This product functions as a high durable exterior carboxyl binder, matting hardener and matting agent that can be used in powder coatings. | |
| Solid Acrylic Resin RDA-200 | Anshan Runde Fine Chemicals Co., Ltd. | Solid Acrylic Resin RDA-200 is an acrylic acid polymer that has an acid content between 195 and 205 mg KOH/g. This product functions as a high durable exterior carboxyl binder, matting hardener and matting agent that can be used in powder coatings. | |
| Solid Acrylic Resin RDE-300 | Anshan Runde Fine Chemicals Co., Ltd. | Solid Acrylic Resin RDE-300 is an acrylic acid polymer that has an epoxy equivalent of 300 ± 5. This product functions as a high durable exterior glycidyl binder, matting hardener and matting agent that can be used in powder coatings. | |
| Solid Acrylic Resin RDE-500 | Anshan Runde Fine Chemicals Co., Ltd. | Solid Acrylic Resin RDE-500 is an acrylic acid polymer that has an epoxy equivalent of 500 ± 5. This product functions as a high durable exterior glycidyl binder, matting hardener and matting agent that can be used in powder coatings. | |
| Solid Acrylic Resin RDE-700 | Anshan Runde Fine Chemicals Co., Ltd. | Solid Acrylic Resin RDE-700 is an acrylic acid polymer that has an epoxy equivalent of 700 ± 5. This product functions as a high durable exterior glycidyl binder, matting hardener and matting agent that can be used in powder coatings. | |
| Strodex™ FT-100 | Ashland | 可在水性涂料中提高色浆的分散稳定性，减少浮色和擦拭掉色。它可作为主要或辅助乳化剂用于制备水性乳液体系。它可为成品乳胶提供良好的机械性能和储存性能以及低凝结点 | |
| Strodex™ FT-427 | Ashland | Strodex™ FT-427是一种磷酸酯表面活性剂，适用于水性建筑涂料。Strodex™ FT-427基于中性（钾盐）乙氧基磷酸酯 | |
| Strodex™ FT-428 Surfactant | Ashland | Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant ca...展开 Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant can also function as a strong wetting agent and dispersant aid and help reduce pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). 收起 | |
| Strodex™ FT-50K | Ashland | 低起泡磷酸酯表面活性剂，可提高展色性，减少浮色和擦拭掉色。它作为辅助分散剂可减少絮凝 | |
| Strodex™ FT-68 | Ashland | Strodex™ FT-68 is a specialty surfactant based neutralized (potassium salt) form of a phosphate ester. It is designed to impart superior stability to latex paints, including freeze-thaw as well as mechanical stability. | |
| Strodex™ KM-0VOC | Ashland | 该表面活性剂是脂肪醇磷酸酯的中和态（钾盐）。它可为乳胶漆提供出色的低水敏感性和稳定性。尤其适合用于含氧化锌或其它活性颜料的油漆中。它也非常适合用于防腐蚀，防闪锈和防钉头锈蚀 | |
| Strodex™ PK-0VOC | Ashland | 它是一种脂肪醇磷酸共酯的中和态（钾盐）。它设计用于为水性乳胶漆改善光泽度和颜色接受性 | |
| Strodex™ PK-85NV Surfactant | Ashland | Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strod...展开 Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strodex™ PK-85NV surfactant can also function as a supplemental dispersant to assist in reduction of pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). 收起 | |
| Strodex™ PK-90 | Ashland | Strodex™ PK-90 is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved gloss and color acceptance in water borne latex paints. | |
| Strodex™ PK-95G | Ashland | Strodex™ PK-95G is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved gloss and color acceptance in waterborne latex paints. | |
| Strodex™ TH-100 | Ashland | 该表面活性剂是脂肪醇磷酸酯的中和态（钾盐）。它可为乳胶漆提供出众的稳定性，包括机械稳定性以及热和冰冻解冻稳定性。它可提高乳胶漆配方的耐浮色性能。取决于具体配方样本，它也可用作分散助剂，帮助减少颜料絮凝。 | |
| Syncryl 104 | Galstaff Multiresine S.p.A. | Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combinatio...展开 Syncryl 104 is an epoxy-acrylated oligomer for UV coatings for wood and OPV. It's main characteristics are it's high reactivity and hardness. Wood enamels, off-set inks, parquet varnishes and OPV coatings can be obtained by using Syncryl 104 in combination with other UV resins or acrylic monomers. 收起 | |
| Syncryl DPGDA | Galstaff Multiresine S.p.A. | Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electro...展开 Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electronics, photopolymers, inks and paints. Syncryl DPGDA provides low volatility, flexibility, adhesion, hardness and weatherability, water abrasion chemical and weather resistance. 收起 | |
| Syncryl GPTA | Galstaff Multiresine S.p.A. | Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast ...展开 Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast surface curing, low shrinkage, flexibility, adhesion, weatherability, water, chemical and abrasion resistance. 收起 | |
| Syncryl TMPEOTA | Galstaff Multiresine S.p.A. | Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating system...展开 Syncryl TMPEOTA is a trifunctional oligoacrylate that is a reactive oligomer which polymerizes with the free radicals in the system. It's main characteristics are low viscosity, light colour and low irritancy. It is for use in OPV, inks and coating systems. 收起 | |
| Synteven 052 | Galstaff Multiresine S.p.A. | Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated po...展开 Synteven 052 is linear polyester bearing hydroxyl groups and is solvent free. It is used to improve the flexibility, toughness and resistance to wear and abrasion of the paint films. Synteven 052 can be used alone or in combination with other saturated polyesters to formulate two pack polyurethane coatings with very high flexibility for wood ,metal and plastics support. Is necessary in combination with isocynate, to have a good dry film, greatly overcrosslinked. 收起 | |
| Synteven 713 R | Galstaff Multiresine S.p.A. | Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non highe...展开 Synteven 713 R is a direct glossy unsaturated polyester, TMPDE modified, monomer free. It is used for high solids coatings with a low monomer containing or monomer free systems. The viscosity may be reduced using ethyl acetate in small quantity, non higher then 10%,to avoid the presece of the micro bubbles in the film. Synteven 713 R is used to formulate high solids, clear and pigmented, coatings for wood and furniture monomer free, cured by conventional Hydroperoxide/Co. The films have very good air-releasing. 收起 | |
| Synteven 728 AE | Galstaff Multiresine S.p.A. | Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven ...展开 Synteven 728 AE is a reactive unsaturated polyester (wax-free) resin TMPDE modified in Ethyl Acetate. Coatings based on Synteven 728 AE are cured with a cobalt/hydroperoxide combination. The films show a very good flow and very good sandability. Synteven 728 AE is used to formulate of clear and pigmented, wax-free coatings for wood and furniture, high gloss to matt, with good fast films drying. 收起 | |
| Synteven 9013 XA | Galstaff Multiresine S.p.A. | Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life...展开 Synteven 9013 XA is a short oil alkyd resin , fatty acids modified ,in Xylene/Butyl Acetate (90/10). This product is especially suitable for the formulation of fast drying two-pack systems for clear or pigmented finishes for wood with a very long pot-life also in combination with aromatic polyisocianate. Synteven 9013 XA is used in the formulation of air drying two-pack coatings. 收起 | |
| Synteven P3 GA-707 | Galstaff Multiresine S.p.A. | Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films...展开 Synteven P3 GA-707 is a highly reactive, unsaturated polyester resin in styrene. Synteven P3 GA-707 permits the formulation of coatings which can be cured by conventional methods or after addition of photoinitiators, by U.V. radiation. The resultant films are hard and resistant to scratching, chemicals and very good sandability. This product is used in the formulation of clear or pigmented coats for wood and furniture. The coating can be cured by conventional methods or U.V radiation. 收起 |
