JMT-150ANO | Tayca Corporation | JMT-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150AO | Tayca Corporation | JMT-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150FI | Tayca Corporation | JMT-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JMT-150IB | Tayca Corporation | JMT-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
JR-301 | Tayca Corporation | JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle...展开 JR-301 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .3µm particle size and 18 g/100g of oil absorption. 收起 | |
JR-403 | Tayca Corporation | JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average ....展开 JR-403 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
JR-405 | Tayca Corporation | JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particl...展开 JR-405 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .21µm particle size and 15 g/100g of oil absorption. 收起 | |
JR-600A | Tayca Corporation | JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm partic...展开 JR-600A is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
JR-600E | Tayca Corporation | JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm partic...展开 JR-600E is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
JR-603 | Tayca Corporation | JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average...展开 JR-603 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum and zirconium with an average .28µm particle size and 21 g/100g of oil absorption. 收起 | |
JR-605 | Tayca Corporation | JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particl...展开 JR-605 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum with an average .25µm particle size and 19 g/100g of oil absorption. 收起 | |
JR-701 | Tayca Corporation | JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an av...展开 JR-701 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 20 g/100g of oil absorption. 收起 | |
JR-800 | Tayca Corporation | JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27...展开 JR-800 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .27µm particle size and 29 g/100g of oil absorption. 收起 | |
JR-805 | Tayca Corporation | JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29...展开 JR-805 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .29µm particle size and 22 g/100g of oil absorption. 收起 | |
JR-806 | Tayca Corporation | JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25...展开 JR-806 is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for inks that are applied to automobiles, household products and other white-colored products. It contains aluminum and silicon with an average .25µm particle size and 21 g/100g of oil absorption. 收起 | |
JRNC | Tayca Corporation | JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an aver...展开 JRNC is a rutile crystal structured white pigment used as a coloring agent. This titanium dioxide is used for paints that are applied to automobiles, household products and other white-colored products. It contains aluminum, silicone and zinc with an average .27µm particle size and 21 g/100g of oil absorption. 收起 | |
K-White #105 | Tayca Corporation | K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #105 is a white powder aluminum triphosphate with an average particle size of 1.6 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #140W | Tayca Corporation | K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #140W is a white powder aluminum triphosphate with an average particle size of 2.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #450H | Tayca Corporation | K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White #450H is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #82 | Tayca Corporation | K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #82 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84 | Tayca Corporation | K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #84 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #84S | Tayca Corporation | K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White #84S is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #85 | Tayca Corporation | K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #85 is a white powder aluminum triphosphate with an average particle size of 3.7 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White #94 | Tayca Corporation | K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent-...展开 K-White #94 is a white powder aluminum triphosphate with an average particle size of 6.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White Ca650 | Tayca Corporation | K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solven...展开 K-White Ca650 is a white powder aluminum triphosphate with an average particle size of 3.5 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
K-White G105 | Tayca Corporation | K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent...展开 K-White G105 is a white powder aluminum triphosphate with an average particle size of 2.3 microns. It is designed to be used as an anti-corrosive, white pigment in a wide range of fields such as paints, coatings and inks. It can be used with both solvent- and water-based applications. 收起 | |
MSN-002 | Tayca Corporation | MSN-002 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSN-003 | Tayca Corporation | MSN-003 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSN-007 | Tayca Corporation | MSN-007 is an anionic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-001 | Tayca Corporation | MSP-001 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-005 | Tayca Corporation | MSP-005 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-009 | Tayca Corporation | MSP-009 is a cationic silica dioxide with an average primary particle size of 80 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MSP-012 | Tayca Corporation | MSP-012 is a cationic silica dioxide with an average primary particle size of 16 nm. It is surface treated with alkylsilane and silicone oil, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MT-01 | Tayca Corporation | MT-01 is a micro titanium dioxide (10nm) that contains aluminum and stearic acid and can be used in pigments, paints and inks to provide water repellency, transparency and dispersibility. | |
MT-05 | Tayca Corporation | MT-05 is a micro titanium dioxide (10nm) that contains aluminum and silicon and can be used in pigments, paints and inks to provide water repellency, transparency and low activity. | |
MT-100AQ | Tayca Corporation | MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints,...展开 MT-100AQ is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon, aluminum and sodium alginate. It exhibits good stability, water affinity and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100HD | Tayca Corporation | MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-100HD is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100S | Tayca Corporation | MT-100S is a micro titanium dioxide (15nm) that contains aluminum and lauric acid and can be used in pigments, paints and inks to provide water repellency, lipophilic characteristics and affinity with resin. | |
MT-100SA | Tayca Corporation | MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electr...展开 MT-100SA is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100WP | Tayca Corporation | MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such...展开 MT-100WP is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with silicon. It exhibits good water affinity, compatibility with water-soluble thickening agents and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-100Z | Tayca Corporation | MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks an...展开 MT-100Z is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and stearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-10EX | Tayca Corporation | MT-10EX is a micro titanium dioxide (10nm) that contains aluminum and isostearic acid and can be used in pigments, paints and inks to provide transparency, dispersibility and low viscosity when dispersed in oil phase. | |
MT-150A | Tayca Corporation | MT-150A is an unprocessed titanium dioxide with an average primary particle size of 15 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-150EX | Tayca Corporation | MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, ink...展开 MT-150EX is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with aluminum and isostearic acid. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-150W | Tayca Corporation | MT-150W is a micro-fine titanium dioxide with an average primary particle size of 15 nm. It has been surface treated with sodium metaphosphate. It exhibits good transparency and dispersibility in applications such as paints, inks and electrophotography. | |
MT-300HD | Tayca Corporation | MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-300HD is a micro-fine titanium dioxide with an average primary particle size of 25 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500B | Tayca Corporation | MT-500B is an unprocessed titanium dioxide with an average primary particle size of 35 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-500HD | Tayca Corporation | MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-500HD is a micro-fine titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MT-500SA | Tayca Corporation | MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-500SA is a titanium dioxide with an average primary particle size of 35 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-500SAS | Tayca Corporation | MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is ...展开 MT-500SAS is a titanium dioxide with an average primary particle size of 30 nm. It has been surface treated with silicone oil, silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance and water repellency. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-600B | Tayca Corporation | MT-600B is an unprocessed titanium dioxide with an average primary particle size of 50 nm. It is suitable for use as a colorant in paints, inks and electrophotography. | |
MT-600SA | Tayca Corporation | MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in pa...展开 MT-600SA is a titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with silicon and aluminum, making it suitable for applications requiring good outdoor weather resistance. It is suitable for use as a colorant in paints, inks and electrophotography. 收起 | |
MT-700B | Tayca Corporation | MT-700B is an unprocessed titanium dioxide with an average primary particle size of 80 nm. It is suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency is desired. | |
MT-700HD | Tayca Corporation | MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and elec...展开 MT-700HD is a micro-fine titanium dioxide with an average primary particle size of 50 nm. It has been surface treated with zirconium and aluminum. It exhibits good outdoor weather resistance and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-02 | Tayca Corporation | MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints,...展开 MTY-02 is a micro-fine titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good transparency, water repellency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-110M3S | Tayca Corporation | MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applicati...展开 MTY-110M3S is a micro-fine, low viscosity titanium dioxide with an average primary particle size of 10 nm. It has been surface treated with aluminum, silicon and silicone oil. It exhibits good water repellency, transparency and dispersibility in applications such as paints, inks and electrophotography. 收起 | |
MTY-150ANO | Tayca Corporation | MTY-150ANO is a cationic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150AO | Tayca Corporation | MTY-150AO is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150FI | Tayca Corporation | MTY-150FI is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-150IB | Tayca Corporation | MTY-150IB is an anionic titanium dioxide with an average primary particle size of 15 nm. It is surface treated with alkylsilane, making it suitable for use as a water repellant colorant in paints, inks and electrophotography. | |
MTY-700BS | Tayca Corporation | MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency ...展开 MTY-700BS is a titanium dioxide with an average primary particle size of 80 nm. It is surface treated with silicone oil, making it suitable for use as a colorant in paints, inks and electrophotography in applications where good UV-A scattering efficiency and water repellency is desired. 收起 | |
MZ-300 | Tayca Corporation | MZ-300 is an untreated micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency and UV-A shielding properties in formulations for paints and inks. | |
MZ-306X | Tayca Corporation | MZ-306X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good transparency, water repellency, dispersibility and UV-A shielding properties in formulations for paints and inks. | |
MZ-500 | Tayca Corporation | MZ-500 is an untreated micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
MZ-506X | Tayca Corporation | MZ-506X is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency, dispersal and transparency properties in formulations for paints and inks. | |
MZ-510HPSX | Tayca Corporation | MZ-510HPSX is a silica and silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency and good light resistance in formulations for paints and inks. | |
MZY-303S | Tayca Corporation | MZY-303S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 35 nm. It exhibits good water repellency, transparency and UV-A shielding properties in formulations for paints and inks. | |
MZY-505S | Tayca Corporation | MZY-505S is a silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits good water repellency and transparency properties in formulations for paints and inks. | |
MZY-510M3S | Tayca Corporation | MZY-510M3S is a low viscosity, silicone oil treated, micro-fine zinc dioxide with an average primary particle size of 25 nm. It exhibits very good transparency in formulations for paints and inks. | |
Polytone AP 108 | Polyols and Polymers | Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...展开 Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 108 is primarily used as an additive for rubber, upholstery, shoe, leather and many other types of adhesives. It is also used as an additive in coatings that provide strength and heat resistance. 收起 | |
Polytone AP 109 | Polyols and Polymers | Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...展开 Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 109 is primarily used to impart good open time combined with green tack and durability, and provides some heat resistance similar to Polytone AP 108 but not as strong of resistance. Polytone AP 109 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. 收起 | |
Polytone AP 110 | Polyols and Polymers | Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...展开 Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 110 is primarily used to impart good open time combined with green tack and durability, and provides heat resistance. Polytone AP 110 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. 收起 | |
Polytone AP 111 | Polyols and Polymers | Polytone AP 111 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces an...展开 Polytone AP 111 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces and is formulated to be used in neoprene. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 111 is primarily used with adhesive grades of chloroprene that provides bond strength at room or higher temperatures. It is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with enamels, coatings and varnishes. 收起 | |
Polytone AP 112 | Polyols and Polymers | Polytone AP 112 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has pale yellow color, delivered as small solid pieces and is for...展开 Polytone AP 112 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has pale yellow color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 112 is primarily used with adhesive grades of chloroprene that provide bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with enamels, coatings and varnishes. Polytone AP 112 is also used in tung and long based oils and is an alkyl insulator in varnishes, auto primers and wire enamels. 收起 | |
Polytone AP 113 | Polyols and Polymers | Polytone AP 113 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color, delivered as small solid pieces and is formulated ...展开 Polytone AP 113 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color, delivered as small solid pieces and is formulated to be used for cross linking butyl rubber. Polytone AP 113 is primarily used in rubber adhesives and in curing of butyl rubber in the tire industry. It is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon. 收起 | |
Polytone AP 114 | Polyols and Polymers | Polytone AP 114 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is f...展开 Polytone AP 114 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 114 is primarily used with adhesive grades of chloroprene that provides bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, tacky tape, automotive and many other adhesives; it is also used in enamels, coatings and varnishes. 收起 | |
Polytone AP 115 | Polyols and Polymers | Polytone AP 115 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has dark violet color, delivered as small solid pieces and is for...展开 Polytone AP 115 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. This product is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon. Polytone AP 115 is primarily used with adhesive grades of chloroprene that provide bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with enamels, coatings and varnishes. Polytone AP 115 is also used in tung and long based oils and is an alkyl insulator in varnishes, auto primers and wire enamels. 收起 | |
Polytone AP 116 | Polyols and Polymers | Polytone AP 116 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is f...展开 Polytone AP 116 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. Polytone AP 116 is primarily used with adhesive grades of chloroprene that provides bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, tacky tape, automotive and many other adhesives; it is also used in enamels, coatings and varnishes. 收起 | |
Polytone AP 117 | Polyols and Polymers | Polytone AP 117 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is f...展开 Polytone AP 117 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a dark violet color, delivered as small solid pieces and is formulated to be used in neoprene adhesives. It imparts low initial viscosity and stable viscous adhesives that are similar to the nature of this adhesive. This product is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon. Polytone AP 117 is primarily used with adhesive grades of chloroprene that provides bonding strength at room or higher temperatures. This product is used as an additive in rubber, upholstery, shoe, leather, tacky tape, automotive and many other adhesives; it is also used in enamels, coatings and varnishes. 收起 | |
Polytone AP 120 | Polyols and Polymers | Polytone AP 120 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, deliv...展开 Polytone AP 120 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to develop high tackiness in rubber compounds. Polytone AP 120 is primarily used as an additive in rubber compounds. It is soluble in ester, ketones, aromatic and aliphatic chlorinated hydrocarbons and is not soluble in alcohols. 收起 | |
Polytone AP 121 | Polyols and Polymers | Polytone AP 121 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive adhesive resin that has a pale yellow-light reddish brown color, delivered as small solid. ...展开 Polytone AP 121 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive adhesive resin that has a pale yellow-light reddish brown color, delivered as small solid. Polytone AP 121 is primarily used as a tackifier in the production of mechanical goods. It is soluble in aromatic solvents including toluene, benzene, ketones and chlorinated hydrocarbon. 收起 | |
Polytone AP 122 | Polyols and Polymers | Polytone AP 122 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as sm...展开 Polytone AP 122 is a para-octyl phenol (POP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. Polytone AP 122 is primarily used as a tackifier in the production of rubber goods and adhesives. It is soluble in esters, ketones, aromatic and aliphatic chlorinated hydrocarbons. 收起 | |
Polytone AP 130 | Polyols and Polymers | Polytone AP 130 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, deliv...展开 Polytone AP 130 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to give reliable performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, chip and abrasion resistance when cross-linked with methylene. Polytone AP 130 is primarily used as a reinforcing resin as a lining in several different rubber products and as an additive in rubber adhesives. It is soluble in ester, ketones, aromatic and aliphatic chlorinated hydrocarbons and is not soluble in alcohols. 收起 | |
Polytone AP 131 | Polyols and Polymers | Polytone AP 131 is a para-octyl phenol (POP) formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, deliv...展开 Polytone AP 131 is a para-octyl phenol (POP) formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic alkyl resin that has a pale yellow-light reddish brown color, delivered as small solid pieces. It is intended to be used in synthetic natural rubber based compounds. Polytone AP 131 is primarily used in applications that require high hardness in industrial areas to prevent chips and abrasion. It is soluble in esters, ketones, aromatic and aliphatic chlorinated hydrocarbons. 收起 | |
Polytone AP 132 | Polyols and Polymers | Polytone AP 132 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as...展开 Polytone AP 132 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as small solid pieces. It is intended to provide steady performance as axs reinforcing resin in synthetic and natural rubber based goods that need high hardness along with chip and abrasion resistance when cross linked with a methylene product. Polytone AP 132 is primarily used as a reinforcing additive in rubber adhesives, conveyer belts, apex strips and many more. 收起 | |
Polytone AP 133 | Polyols and Polymers | Polytone AP 133 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as...展开 Polytone AP 133 is a phenol formaldehyde resin (Novolac) that is a part of the alkyl phenol family of organic compounds. This product is a non-heat reactive thermoplastic unmodified phenol-formaldehyde resin that has a pale amber color and is delivered as small solid pieces. It is intended to provide steady performance as a reinforcing resin in synthetic and natural rubber based goods that need high hardness along with chip and abrasion resistance when cross linked with a methylene product. Polytone AP 133 is primarily used as a reinforcing additive in rubber adhesives, conveyer belts, apex strips and many more. It is soluble in esters, ketones, aromatic and aliphatic chlorinated hydrocarbons and is not soluble in alcohols. 收起 | |
Polytone K 93 | Polyols and Polymers | Polytone K 93 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It imparts gloss, adhesiveness, leveling and also reduces levels in the VOC. The hydroxyl polarity allows for wetting of pigments...展开 Polytone K 93 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It imparts gloss, adhesiveness, leveling and also reduces levels in the VOC. The hydroxyl polarity allows for wetting of pigments and surfaces. Polytone K 93 is primarily used as an additive for polishing lacquers and finishes it is also used in heat seal coatings, primers and base coatings and gasoline resistant coatings. The different uses of Polytone K 93 are flexographic and gravure inks, ball point inks, Pants and coatings and different types of varnishes. 收起 | |
Polytone K 94 | Polyols and Polymers | Polytone K 94 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is a unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to h...展开 Polytone K 94 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is a unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to have solvent retention. Plus this resin improves gloss, hardness, filling, adhesive strength and durability. Polytone K 94 is primarily used to impart gloss, adhesiveness in the inks and increase the solid content in flexographic and gravure inks, ball point inks, lacquers, varnishes, paintings and coatings. 收起 | |
Polytone K 95 | Polyols and Polymers | Polytone K 95 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is a unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to h...展开 Polytone K 95 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is a unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to have solvent retention. Plus this resin improves gloss, hardness, filling, adhesive strength and durability. Polytone K 95 is primarily used to impart gloss, adhesiveness in the inks and increase the solid content in flexographic and gravure inks, ball point inks, lacquers, varnishes, paintings and coatings. 收起 | |
Polytone K 96 | Polyols and Polymers | Polytone K 96 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is an unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to ...展开 Polytone K 96 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is an unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to have solvent retention. Plus this resin improves gloss, hardness, filling, adhesive strength and durability. It is used in the production of all types of nitro lacquers and is appropriate for paper lacquers; this resin is also useful in producing PVC polishing lacquers. Polytone K 96 is primarily used to impart gloss, adhesiveness in the inks and increase the solid content in flexographic and gravure inks, ball point inks, lacquers, varnishes, paintings and coatings. 收起 | |
Polytone K 97 | Polyols and Polymers | Polytone K 97 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is an unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to ...展开 Polytone K 97 is a cyclohexanone formaldehyde resin. This product is a pearly white color and comes in a granular solid form. It is close to being acid free and is an unsaponifiable ketone formaldehyde resin that has light resistance and has tendency to have solvent retention. Plus this resin improves gloss, hardness, filling, adhesive strength and durability. It is used in the production of all types of nitro lacquers and is appropriate for paper lacquers; this resin is also useful in producing PVC polishing lacquers. Polytone K 97 is primarily used to impart gloss, adhesiveness in the inks and increase the solid content in flexographic and gravure inks, ball point inks, lacquers, varnishes, paintings and coatings. 收起 | |
Polytone M 130 | Polyols and Polymers | Polytone M 130 is a rosin modified maleic resin. This product is an oil soluble yellowish-brown color resin that comes in small solid pieces. It improves film hardness of nitrocellulose and chlorinated rubber paints. Polytone M 130 is primarily used for p...展开 Polytone M 130 is a rosin modified maleic resin. This product is an oil soluble yellowish-brown color resin that comes in small solid pieces. It improves film hardness of nitrocellulose and chlorinated rubber paints. Polytone M 130 is primarily used for paints, primers, chlorinated rubber paints, nitrocellulose paints and also as a sanding sealer. 收起 | |
Polytone M 131 | Polyols and Polymers | Polytone M 131 is a rosin modified maleic resin. This product is an oil soluble yellow-light brown color resin that comes in small solid pieces. Polytone M 131 is primarily used as an additive in varnishes, paints, over print varnishes, lacquers etc. It i...展开 Polytone M 131 is a rosin modified maleic resin. This product is an oil soluble yellow-light brown color resin that comes in small solid pieces. Polytone M 131 is primarily used as an additive in varnishes, paints, over print varnishes, lacquers etc. It is soluble in mineral turpentine oil and toluene. 收起 | |
Polytone M 135 | Polyols and Polymers | Polytone M 135 is a rosin modified maleic resin. This product is an spirit soluble yellow color resin that comes in small solid pieces. Polytone M 135 is primarily used as an additive in spirit soluble varnishes, nitrocellulose lacquers, road marking pain...展开 Polytone M 135 is a rosin modified maleic resin. This product is an spirit soluble yellow color resin that comes in small solid pieces. Polytone M 135 is primarily used as an additive in spirit soluble varnishes, nitrocellulose lacquers, road marking paints and liquid inks. 收起 | |
Polytone M 136 | Polyols and Polymers | Polytone M 136 is a rosin modified maleic resin. This product is a spirit soluble yellow color resin that comes in small solid pieces. Polytone M 136 is primarily used as an additive in paper varnishes and liquid inks. | |
Polytone P 140 | Polyols and Polymers | Polytone P 140 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a modified phenolic resin for use with drying oil such as linseed and tung oil. It is highly soluble ...展开 Polytone P 140 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a modified phenolic resin for use with drying oil such as linseed and tung oil. It is highly soluble in white spirit. Polytone P 140 is primarily used as an additive for its anticorrosion properties, water resistance and the retention of color in printing inks, paint coatings, sealants and marine finishes. 收起 | |
Polytone P 141 | Polyols and Polymers | Polytone P 141 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is suitable for manufacture of offset printing inks where...展开 Polytone P 141 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is suitable for manufacture of offset printing inks where low body is required. Polytone P 141 is primarily used as an additive in liquid inks that have good solvent release properties. It is used in flexographic, offset, and printing inks along with varnishes and has several more uses. It is soluble with aliphatic and aromatic hydrocarbons, ester and varnish oils. It is not soluble with aldehydes. 收起 | |
Polytone P 142 | Polyols and Polymers | Polytone P 142 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is suitable for manufacture of letterpress inks, offset p...展开 Polytone P 142 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is suitable for manufacture of letterpress inks, offset printing inks that has water repellant properties. Polytone P 142 is primarily used as an additive in liquid inks and is most commonly found in high gloss gravure printing inks. It is used in flexographic, offset, and printing inks along with varnishes and has several more uses. It is soluble with aliphatic and aromatic hydrocarbons, ester and varnish oils. It is not soluble with aldehydes. 收起 | |
Polytone P 143 | Polyols and Polymers | Polytone P 143 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is appropriate for production of high gloss quick set she...展开 Polytone P 143 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting modified phenolic resin that is appropriate for production of high gloss quick set sheet fed and web offset inks. Polytone P 143 is primarily used as an additive for offset printing inks, flexographic inks, gravure inks and varnishes. It is soluble with aliphatic and aromatic hydrocarbons, esters and varnish oils. 收起 | |
Polytone P 144 | Polyols and Polymers | Polytone P 144 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting high molecular weight modified phenolic resin that is appropriate for production of hi...展开 Polytone P 144 is a rosin modified penta esterified and phenol formaldehyde resin. This product is yellowish-brown and comes in small solid pieces. It is a high melting high molecular weight modified phenolic resin that is appropriate for production of high grade quickset sheet fed inks; it provides gloss and sharp prints with stability. Polytone P 144 is primarily used as an additive for heat set inks, flexographic inks, gravure inks and varnishes. It is soluble with aliphatic and aromatic hydrocarbons, esters and varnish oils. 收起 |