| AC-21 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epo...展开 AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epoxy, silicone, acrylic and polyurethane. 收起 | |
| AC-62 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used...展开 AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-626 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62...展开 AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-626 can also be used as an additive in foundry and abrasive thermosetting resin. 收起 | |
| AC-63 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, cla...展开 AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, clay and silicas. 收起 | |
| AC-65 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for ...展开 AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for adhesive and sealant production. 收起 | |
| AC-66 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer ...展开 AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer to glass and metallic substrates. 收起 | |
| AC-661 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor i...展开 AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor in polymer to glass as well as in metallic substrates. 收起 | |
| AC-662 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion...展开 AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder to glass and metal substrates. 收起 | |
| AC-66(E) | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion pro...展开 AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder to glass and metal substrates. 收起 | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...展开 AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. 收起 | |
| AC-68 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic e...展开 AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic emulsion in adhesives as well as a filler in glass fiber surface treatments. 收起 | |
| AC-703 Anionic Fluorocarbon Surfactant | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in s...展开 AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in strong base or strong oxidant media. It is a brownish, clear liquid in appearance. 收起 | |
| AC-75 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass ...展开 AC-75 is a Vinyl triethoxysilane with the chemical structure CH2=CHSi(OC2H5)3, and comes as a colorless transparent liquid. Primarily used in the production of vinyl and acrylic co-polymers, AC-75 can be used as an adhesion promoter in polymers for glass / metallic substrates. 收起 | |
| AC-76 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-76 is a Vinyltriisopropoxysilane with the chemical formula C11H24O3Si and comes as a clear and colorless liquid. It is primarily used as a monomer in acrylic emulsions in the production of paints and coatings. | |
| AC-77 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and oth...展开 AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and other rubber chemicals as an adhesion promoter for paints and coatings. 收起 | |
| APMS Fluid A 1000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 10000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mo...展开 APMS Fluid A 10000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 2000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 2000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| APMS Fluid A 5000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...展开 APMS Fluid A 5000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. 收起 | |
| BM703T | Nantong Bojo Pigments Co., Ltd. | BM703T, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade un...展开 BM703T, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade undertones, and it is often used in paint and coatings. 收起 | |
| BM708 | Nantong Bojo Pigments Co., Ltd. | BM708, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade und...展开 BM708, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade undertones, and it is often used in paint and coatings. 收起 | |
| BM718 | Nantong Bojo Pigments Co., Ltd. | BM718, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade und...展开 BM718, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade undertones, and it is often used in paint and coatings. 收起 | |
| BM760 | Nantong Bojo Pigments Co., Ltd. | BM760, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade und...展开 BM760, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade undertones, and it is often used in paint and coatings. 收起 | |
| BS708 | Nantong Bojo Pigments Co., Ltd. | BS708, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade und...展开 BS708, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade undertones, and it is often used in paint and coatings. 收起 | |
| BS718 | Nantong Bojo Pigments Co., Ltd. | BS718, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade und...展开 BS718, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade undertones, and it is often used in paint and coatings. 收起 | |
| BS760 | Nantong Bojo Pigments Co., Ltd. | BS760, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade und...展开 BS760, in the form of a micronized black powder, is a black iron oxide pigment. This product is composed of ferric and manganese oxides, which can be used at temperatures up to 300°C. It has excellent dispersibility, high tint strength, and blue shade undertones, and it is often used in paint and coatings. 收起 | |
| Fluororesin | Ark (Fogang) Chemicals Industry Co., Ltd. | Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints ...展开 Fluororesin is a brownish, clear liquid made with many hydroxyls. It has many applications in use as a lubricant, fiber-treatment, release, water-proofing agents as well as an antifouling, non-adheasive and optical coating agent. It can be used in paints which are weather durable, antifouling or salt fog resistant. 收起 | |
| NA100 Anatase | Nanjing Titanium Dioxide Chemical Co., Ltd. | NA100 Anatase is an anatase titanium dioxide that is designed to provide strong covering power, good pigment performance, high lightening power, and low oil absorption. This product is commonly used in interior wall coatings, and it has a TiO2 content of ...展开 NA100 Anatase is an anatase titanium dioxide that is designed to provide strong covering power, good pigment performance, high lightening power, and low oil absorption. This product is commonly used in interior wall coatings, and it has a TiO2 content of 98.0% and a pH value of 6.5-8.5. 收起 | |
| NR950 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR950 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in coatings and inks, and it has...展开 NR950 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in coatings and inks, and it has a TiO2 content of 92.0% and a pH value of 6.0-8.5. 收起 | |
| NR9501 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR9501 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in oil paints and inks, and it ...展开 NR9501 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in oil paints and inks, and it has a TiO2 content of 92.0% and a pH value of 6.5-8.5. 收起 | |
| NR9502 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR9502 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance and heat resistance, and good dispersibility in water-based and oil systems. This product is commonly...展开 NR9502 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, good weather resistance and heat resistance, and good dispersibility in water-based and oil systems. This product is commonly used in interior and outdoor coatings, inks, and powder coatings, and it has a TiO2 content of 92.0% and a pH value of 6.5-8.5. 收起 | |
| NR9503 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR9503 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in water-based paints, emulsion paints, and wa...展开 NR9503 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness, strong covering power, good weather resistance, heat resistance, and light resistance. This product is commonly used in water-based paints, emulsion paints, and water-based inks, and it has a TiO2 content of 90.0% and a pH value of 7.0-9.0. 收起 | |
| NR960 Rutile | Nanjing Titanium Dioxide Chemical Co., Ltd. | NR960 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, low oil absorption, good weather resistance, heat resistance, and light resistance. This product is commonly used in interior ...展开 NR960 Rutile is a rutile titanium dioxide that is designed to provide excellent whiteness and glossiness, strong covering power, low oil absorption, good weather resistance, heat resistance, and light resistance. This product is commonly used in interior and outdoor coatings, powder coatings, and inks, and it has a TiO2 content of 93.0% and a pH value of 6.5-8.0. 收起 | |
| RM100 | Nantong Bojo Pigments Co., Ltd. | RM100, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM110 | Nantong Bojo Pigments Co., Ltd. | RM110, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM120 | Nantong Bojo Pigments Co., Ltd. | RM120, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM130 | Nantong Bojo Pigments Co., Ltd. | RM130, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM140 | Nantong Bojo Pigments Co., Ltd. | RM140, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM160 | Nantong Bojo Pigments Co., Ltd. | RM160, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM180 | Nantong Bojo Pigments Co., Ltd. | RM180, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM200 | Nantong Bojo Pigments Co., Ltd. | RM200, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM210 | Nantong Bojo Pigments Co., Ltd. | RM210, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM220 | Nantong Bojo Pigments Co., Ltd. | RM220, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM230 | Nantong Bojo Pigments Co., Ltd. | RM230, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM240 | Nantong Bojo Pigments Co., Ltd. | RM240, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM260 | Nantong Bojo Pigments Co., Ltd. | RM260, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| RM280 | Nantong Bojo Pigments Co., Ltd. | RM280, in the form of a micronized red powder, is a red iron oxide pigment. This product has good dispersibility and high tint strength. It can provide higher gloss and lower haze in paints and coatings. | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展开 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展开 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4500 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 25 microns and a 1.5% water retention rate with 4.3-5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shades P - RP - R) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 4.3 - 5.4 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and ...展开 STANLUX® Paste 100 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance and general industrial paints. 收起 | |
| STANLUX® Paste 100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance,...展开 STANLUX® Paste 100N is a non-leafing type aluminum paste made of lamellar particles covered with stearic acid. This product creates a unique shiny aesthetic effect that provides the applied system with a protective barrier, coverage, corrosion resistance, and thermal reflection. STANLUX® Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective, or marine coatings. 收起 | |
| STANLUX® Paste 1100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation...展开 STANLUX® Paste 1100 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1100N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulatio...展开 STANLUX® Paste 1100N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1100N is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 18 microns and uses High Aromatic solvent. 收起 | |
| STANLUX® Paste 1120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation ...展开 STANLUX® Paste 1120 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1120 is specially recommended for formulation systems with low tolerance to aliphatic solvent and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 17 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...展开 STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...展开 STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 1200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is ...展开 STANLUX® Paste 1200 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1200 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 14 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1290 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power an...展开 STANLUX® Paste 1290 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1290 has a high degree of hiding power and is recommended for use in internal can coatings. It has an average particle size of 8 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial ...展开 STANLUX® Paste 130 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...展开 STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...展开 STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commo...展开 STANLUX® Paste 150 is a leafing type aluminum paste made of medium-coarse lamellar particles covered with stearic acid. STANLUX® Paste 150 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for industrial paints, and roof coatings. It has an average particle size of 19 microns and a minimum water coverage of 14,000 cm2/g. 收起 | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...展开 STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...展开 STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...展开 STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. 收起 | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...展开 STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...展开 STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...展开 STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...展开 STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 1900 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level...展开 STANLUX® Paste 1900 is a non-leafing type aluminum paste made of coarse lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1900 is considered to be standard level and is recommended for systems requiring protective properties. It has an average particle size of 32 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: industrial paints, maintenance, protective and marine coatings. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展开 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...展开 STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展开 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展开 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展开 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展开 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展开 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展开 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展开 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展开 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Paste 340N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incomp...展开 STANLUX® Paste 340N is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflective effect. STANLUX® Paste 340N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for maintenance, protective, marine, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展开 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 |
