| 99.99% Conductive Shining Flake Silver Powder | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...展开 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 收起 | |
| 99.99% Conductive Silver Powder (Spherical) | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications. | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...展开 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. 收起 | |
| CAB-151-0.7 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in p...展开 CAB-151-0.7 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.1 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in ...展开 CAB-381-0.1 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-0.5 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-381-0.5 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing ...展开 CAB-381-2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-381-20 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in pr...展开 CAB-381-20 is a cellulose acetate butyrate resin is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.01 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printi...展开 CAB-551-0.01 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| CAB-551-0.2 | Jiangsu Ruijia Chemistry Co.,Ltd. | CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printin...展开 CAB-551-0.2 is a cellulose acetate butyrate is an amorphous white granule or powder. It can be used in polyurethane coatings, varnishes, as a flow agent in epoxy powder coatings, to improve the flow in high temperature cure powder coatings, and in printing inks. 收起 | |
| Cardanol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing ...展开 Cardanol is made from national cashew nut shell oil, in a high vacuum distillation and solvent extraction processes to obtain industrial cardanol, it can substitute or partial substitute for the production of high performance phenolic resin, epoxy curing agents, surfactants, adhesives, paints, and other products used in the manufacture of friction materials epoxy curing agent, liquid phenolic resin, liquid or powdered thermosetting phenolic resin. 收起 | |
| Diethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Diethylene Glycol Ethyl Ether Acetate appears as a colorless and transparent liquid. It can be used as a coalescing aid for emulsion paints. It is also ideal for use to slow drying in nitrocellulose lacquers, natural paints, or spray paint. | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| Ethylene Glycol Ethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Ethyl Ether Acetate is a colorless and transparent liquid. It can be used as a solvent in protective coatings and inks, as well as a solvent for painting metal and furniture. | |
| Ethylene Glycol Monobutyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether is a colorless and transparent liquid. It can be used as a solvent in paint and as a solvent in enamel paint remover. | |
| Ethylene Glycol Monobutyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monobutyl Ether Acetate is a colorless and transparent liquid. It can be used as a coalescing aid in emulsion paints. It can also be used in emulsion coatings. | |
| Ethylene Glycol Monoethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Ethylene Glycol Monoethyl Ether is a colorless and transparent liquid. It can be used as a solvent in paints and printing inks. It is also used in the preparation of paint thinner and as a raw material for paint. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....展开 Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". 收起 | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| Isobutyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isobutyl Acetate is a clear liquid without precipitates. It can be used in coatings and as a solvent in polymer paints, adhesives, and isocyanate lacquers. | |
| Isooctyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isooctyl Acetate is a clear liquid with a pleasant, fruity fragrance. It is used to promote flow and retard blushing in formulations such as lacquers, lacquers emulsions in screen inks, parking enamels and air-dry enamels. | |
| Isopropyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Isopropyl Acetate is a colorless liquid with a strong, fruity odor. This product is a fast-evaporating solvent. It is used in gravure printing inks for plastic films such as bread wrap. The rest finds many uses in coatings and adhesives. | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...展开 Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. 收起 | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...展开 Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. 收起 | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...展开 Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...展开 Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. 收起 | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...展开 Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. 收起 | |
| N-Propyl Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | N-Propyl Acetate is a colorless and volatile solvent with a mild and fruity odor. It can be used in automotive and plastic coatings and as a solvent in flexographic and screen printing inks. | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Picassian® AC-049 | Stahl Polymers | Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss p...展开 Picassian® AC-049 is a waterbased, anionic acrylic copolymer emulsion agent that is used in exterior wood varnishes. It provides clear, soft, and flexiable films and has good water resistance properties. This has high transparency properties, high gloss properties, high UV resistance properties, and good outdoor durability. 收起 | |
| Picassian® AC-111 | Stahl Polymers | Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance ...展开 Picassian® AC-111 is an aqueous emulsion of an anionic acrylic copolymer that is used in leather finishes. It makes films clear, gloss, soft, and tack free. This product is flexible, elastic, has good chemical resistance properties, good scrub resistance properties, and low water absorption properties. 收起 | |
| Picassian® AC-122 | Stahl Polymers | Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties...展开 Picassian® AC-122 is a waterbased anionic self crosslinking styrene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking properties, good chemical resistance properties, good scratch resistance, good clarity properties, good gloss properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-126 | Stahl Polymers | Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glo...展开 Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glossy, hard, and transparent films once coalesced. This product has good water resistance, humidity resistance, adhesion, corrosion resistance, blister resistance, and mechanical properties. It also has good compatibility with other binders such as acrylics and polyurethanes. 收起 | |
| Picassian® AC-169 | Stahl Polymers | Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance ...展开 Picassian® AC-169 is a waterbased anionic self crosslinking stryene acrylic copolymer emulsion agent. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good blocking resistance properties, good scratch resistance properties, good clarity properties, and is quick and easy to sand. 收起 | |
| Picassian® AC-176 | Stahl Polymers | Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistanc...展开 Picassian® AC-176 is a waterbased anionic styrene acrylic copolymer that contains free hydroxyl groups. It is used in anticorrosive primers and topcoats, and acid curing lacquers. This product is brittle, has good outdoor resistance, has good UV resistance, has good adhesion properties on a varity of metallic and plastic substrates, has good mechanical properties, and makes films clear, hard, flexiable, and glossy. 收起 | |
| Picassian® AC-177 | Stahl Polymers | Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion p...展开 Picassian® AC-177 is a waterbased, anionic, styrene-acrylic copolymer that contains free hydroxyl groups. It is used in acid curing lacquers, anticorrosive primers, high glossy topcoats, and oven cured enamels. This product is brittle, has good adhesion properties with plastic and metallic substrates, good outdoor resistance properties, good UV resistance properties, and good mechanical properties. 收起 | |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...展开 Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. 收起 | |
| Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...展开 Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. 收起 | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...展开 Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. 收起 | |
| Picassian® AC-222 | Stahl Polymers | Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This pro...展开 Picassian® AC-222 is a waterbased anionic alkali soluable acrylic copolymer emulsion agent. It is used in many wood and board coatings, basecoats, grinding binders, pigment sealers, flexo inks, gravure inks, leather finishes, and hobby adhesives. This product has good pigment wetting attributes, high pigment loading capacity attributes, is quick to sand, and is quick to dry. 收起 | |
| Picassian® AC-246 | Stahl Polymers | Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good g...展开 Picassian® AC-246 is a waterbased, anionic, acrylic copolymer emulsion agent. It is used in inks, overprints, coated paper, metalized substrates, and glossy wood varnishes. This product has good holdout properties, good water resistance properties, good grease resistance properties, good alcohol compatibility, and good pigment compatibility. 收起 | |
| Picassian® AC-280 | Stahl Polymers | Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistan...展开 Picassian® AC-280 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent. It is used as a high quality binder, in anticorrosive primers, and in clear and glossy finishes. This product has good blister resistance properties, good water resistance properties, good humidity resistance properties, good adhesion properties on many types of substrates, and good mechanical properties. 收起 | |
| Picassian® AC-295 | Stahl Polymers | Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plasti...展开 Picassian® AC-295 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in anticorrosive coatings, concrete flooring, and with UV coatings as a way of reducing cost. This product has good adhesive properties with metallic and plastic substrates, is widely compatible with many types of binders, has good clarity properties, has good gloss properties, has good chemical resistance properties, and has fast hardness development properties. 收起 | |
| Picassian® PU-508 | Stahl Polymers | Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility ...展开 Picassian® PU-508 is a soft polyether aromatically modified polyurethane resin. It is used in flexo and gravure printing inks, in overprint varnishes, and in plasticizing grades of laminating inks. This product is tin free, TDI free, has good flexibility properties, has good heat seal resistance properties, and has good adhesion on aluminium foil. 收起 | |
| Picassian® PU-518 | Stahl Polymers | Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on alum...展开 Picassian® PU-518 is a non reactive, high molecular weighted, semi aliphatic polyether modified polyurethane resin. It is used in flexo and gravure inks, and as an adhesive promoter. This product is Tin free, TDI free, has good adhesion properties on aluminium foil, is soluble in alcohol rich mixtures, and is fully compatible with alcohol soluble nitrocellulose. 收起 | |
| Picassian® PU-546 | Stahl Polymers | Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol ri...展开 Picassian® PU-546 is a non reactive, film forming, seal aliphatic, polyether modified polyurethane resin. It is used in flexo and gravure printing inks primarily, This product is tin free, TDI free, has pigment wetting attributes, is soluble in alcohol rich mixtures, and has solvent retention values that are lower than those of conventional inks. 收起 | |
| Picassian® PU-548 | Stahl Polymers | Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble res...展开 Picassian® PU-548 is a non reactive, moderately tough, aromatic, polyester modified polyurethane resin. It is used as an adhesion promoter in gravure inks primarily. This product is tin free, TDI free, has good compatibility with other alcohol soluble resins, and is very resistant to oils, water, and fats. 收起 | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...展开 Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. 收起 | |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...展开 Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. 收起 | |
| Picassian® PU-635 | Stahl Polymers | Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility prop...展开 Picassian® PU-635 is an aqueous, non ionic dispersion of an aliphatic polyester urethane. It is used in leather basecoats, and in textiles. This product has low hardness properties, gives films high elongation properties, gives films good flexibility properties, is crosslinkable at room temperature, and is highly compatible with other binders. 收起 | |
| Picassian® PU-648 | Stahl Polymers | Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good co...展开 Picassian® PU-648 is a waterbased anionic dispersion of an aliphatic polyether urethane. It is used in leather basecoats, textiles, and graphic arts. This product is solvent free, has good UV resistance properties, low water absorption properties, good coverage properties, good filling properties, and maintains flexibility at negative 30 degrees Celsius. 收起 | |
| Picassian® XL-701 | Stahl Polymers | Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. Th...展开 Picassian® XL-701 is a multifunctional polycarbodiimide crosslinker that is suitable for use in solvent based systems and aqueous systems. It crosslinks carboxyl functional polymers at room temperature, and should be stored under a nitrogen atmosphere. This product is a yellow, slightly hazy liquid with a solid content of 50 percent. 收起 | |
| Picassian® XL-702 | Stahl Polymers | Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formula...展开 Picassian® XL-702 is a waterbased polycarbodiimide crosslinker that does not yellow. It is used in exterior environments, and water based systems. This product is label free, crosslinks carboxyl function polymers at room temperature, and should be formulated at a pH greater than 8 to achieve a long pot life. 收起 | |
| Picassian® XL-725 | Stahl Polymers | Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and ma...展开 Picassian® XL-725 is a multifunctional polycarbodiimide crosslinker that is a clear, yellow liquid in form. It is used in aqueous based systems and solvent based systems. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起 | |
| Picassian® XL-732 | Stahl Polymers | Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good ad...展开 Picassian® XL-732 is a waterbased polycarbodiimide crosslinker. It is used in water based systems, is VOC free, and is label free. This product has good water and chemical resistance properties, good abrasion and mar resistance properties, and has good adhesion properties with some types of substrates. 收起 | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...展开 Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. 收起 | |
| Propylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether is a colorless and transparent liquid. It is ideal for use as a solvent in printing inks. | |
| Propylene Glycol Monomethyl Ether Acetate | Jiangsu Ruijia Chemistry Co.,Ltd. | Propylene Glycol Monomethyl Ether Acetate is a colorless and transparent liquid. It can be used as an additive in paints for automobiles, refrigerators, and airplanes. | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...展开 Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. 收起 | |
| Relca® HY-460 | Stahl Polymers | Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This produ...展开 Relca® HY-460 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in decorative applications, interior DTM applications, exterior DTM applications, interior wood coatings, and exterior wood coating applications. This product has fast drying properties, good adhesion properties, good shear stability properties, good pigment wetting properties, and is solvent free. 收起 | |
| Relca® HY-625 | Stahl Polymers | Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resi...展开 Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resistance properties, good hydrolysis resistance properties, high hardness properties, and good adhesion properties with wood. 收起 | |
| Relca® PU-406 | Stahl Polymers | Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties,...展开 Relca® PU-406 is an aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in leather and textile finishes, and soft touch coatings. This product is NMP free, has good alcohol resistance properties, good water resistance properties, good chemical resistance properties, good UV resistance properties, good heat resistance properties, and good adhesion properties. 收起 | |
| Relca® PU-415 | Stahl Polymers | Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...展开 Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. 收起 | |
| Relca® PU-476 | Stahl Polymers | Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, go...展开 Relca® PU-476 is an aqueous anionic dispersion of an alkyd modified aliphatic urethane. It is used in interior DTM applications, wood coatings, and parquet flooring. This product is solvent free, has good open time properties, high hardness properties, good adhesion properties, good chemical resistance properties, good pigment wetting properties, good scratch resistance properties, and good black heel mar resistance properties. 收起 | |
| Relca® PU-477 | Stahl Polymers | Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resi...展开 Relca® PU-477 is a low solvent, aqueous anionic dispersion of an aliphatic polycarbonate urethane. It is used in soft touch coatings, high quality leather finishes, and high quality textile finishes. This product is NMP free, NEP free, has good water resistance properties, good chemical resistance properties, good UV resistance properties, good hydrolysis resistance properties, and good adhesion properties with PVC, PUR, and pretreated TPO. 收起 | |
| Relca® PU-655 | Stahl Polymers | Relca PU-655 is an aqueous, anionic dispersion of an aliphatic polycarbonate urethane. It is used in parquet flooring, wood coatings, and metal pre-treatment. This product is solvent free, has good water resistance properties, good chemical resistance pro...展开 Relca PU-655 is an aqueous, anionic dispersion of an aliphatic polycarbonate urethane. It is used in parquet flooring, wood coatings, and metal pre-treatment. This product is solvent free, has good water resistance properties, good chemical resistance properties, good hydrolysis resistance properties, and good adhesion properties with metal and wood. 收起 | |
| Relca® PU-968 | Stahl Polymers | Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion p...展开 Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion properties, and is crosslinkable at room temperature with polycarbodiimides. 收起 | |
| Relca® UV-628 | Stahl Polymers | Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good...展开 Relca® UV-628 is a waterbased UV curable polyurethane. It is solvent free, has good hard resistance properties, good abrasion resistance properties, good stain resistance properties, good chemical resistance properties, good gloss coating properties, good scratch resistance properties, and is tack free before UV curing. This product is used in applications that need to be dried prior to EB/UV curing, and requires the addition of a photoinitiator to ensure proper curing. 收起 | |
| SandGel B | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...展开 SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...展开 SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. 收起 | |
| SandGel BN | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...展开 SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. 收起 | |
| SandGel C | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...展开 SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. 收起 | |
| SandGel HL | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...展开 SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. 收起 | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...展开 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. 收起 | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...展开 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. 收起 | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...展开 Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. 收起 | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...展开 Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. 收起 | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...展开 Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. 收起 | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...展开 Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. 收起 |
