| Docure KH-500F | Kukdo Chemical Co., Ltd. | Docure KH-500F is a Polyamine modified curing agent, which can cure rapidly with epoxy resin at room temperature. KH-500F has been widely applied in the fields of civil engineering, linings, adhesive and coatings. | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...展开 Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. 收起 | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...展开 Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 收起 | |
| Docure TH-438 | Kukdo Chemical Co., Ltd. | Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...展开 Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. 收起 | |
| Docure TH-451 | Kukdo Chemical Co., Ltd. | Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings. | |
| Docure TH-452 | Kukdo Chemical Co., Ltd. | Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings. | |
| Domide G-0240 | Kukdo Chemical Co., Ltd. | Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sea...展开 Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealants. 收起 | |
| Domide G-0331 | Kukdo Chemical Co., Ltd. | Domide G-0331 is a reactive medium viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for making grouts, moldings, adhesives and sealants. | |
| Domide G-0930 | Kukdo Chemical Co., Ltd. | Domide G-0930 is a reactive Polyamide Resin used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in producing laminates, castings, coatings, concrete repair com...展开 Domide G-0930 is a reactive Polyamide Resin used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in producing laminates, castings, coatings, concrete repair compounds, adhesives and sealants. 收起 | |
| Domide G-5022 | Kukdo Chemical Co., Ltd. | Domide G-5022 is a reactive polyamide resin which shows excellent adhesion, toughness, water and chemical resistance as a curing agent for epoxy coatings and adhesives. It is particularly designed for use in solvent-based surface coatings. | |
| Domide G-640 | Kukdo Chemical Co., Ltd. | Domide G-640 is a standard high-imidazoline Polyamide Resin and used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in the production of putties, castings, hig...展开 Domide G-640 is a standard high-imidazoline Polyamide Resin and used as a curing agent of Epoxy Resin. It has relatively high amine value and is generally used with liquid Epoxy Resins. It is well suited for use in the production of putties, castings, high solid coatings, concrete repair compounds, adhesives and sealants. 收起 | |
| Domide G-700 | Kukdo Chemical Co., Ltd. | Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based mainten...展开 Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based maintenance coatings, primers, sealers and coatings for concrete. 收起 | |
| Domide G-A0432 | Kukdo Chemical Co., Ltd. | Domide G-A0432 is a low viscosity Polyamidoamine Resin for reaction with liquid or solid Epoxy Resins. GA0432 is lower in viscosity than G-A0533. This product is well suited for use in sealants, electrical potting and casting. | |
| Domide G-A0533 | Kukdo Chemical Co., Ltd. | Domide G-A0533 is a low-viscosity Polyamidoamine Resin designed for reaction with liquid or solid Epoxy Resins. It can be used as all or part for use in making sealants, electrical potting, casting, coatings and flooring applications. | |
| Epokukdo KEM-128M | Kukdo Chemical Co., Ltd. | Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and...展开 Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and water dispersible curing agent like KH-723 are applied for water thinned two pack coatings, coal tar modified paint and primer for steel, concrete, and other nonmetallic substrates. It is also applied for decorative wall, structural grouting, adhesives and mortar in order to improve adhesive property and physical properties of cement by adding 10-20wt% epoxy resin emulsion. 收起 | |
| Epokukdo KR-207 | Kukdo Chemical Co., Ltd. | epokukdo KR-207 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin with tri-functional epoxy resin. Accordingly, KR-207 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temper...展开 epokukdo KR-207 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin with tri-functional epoxy resin. Accordingly, KR-207 shows good toughness, outstanding adhesion strength, and excellent T-peeling strength at the elevated temperature. KR-207 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexible strength and water resistance both at the ambient temperature and at the cold temperature. 收起 | |
| Epokukdo KR-208 | Kukdo Chemical Co., Ltd. | Epokukdo KR-208 is a NBR modified epoxy resin including epoxy diluents. Accordingly, KR-208 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-208 has good compatibility with a conventional...展开 Epokukdo KR-208 is a NBR modified epoxy resin including epoxy diluents. Accordingly, KR-208 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-208 has good compatibility with a conventional epoxy resin and hardeners with excellent flexibility, adhesion strength and toughness for the wide range of temperatures. It also has good water resistance and excellent oil resistance. 收起 | |
| Epokukdo KR-309 | Kukdo Chemical Co., Ltd. | Epokukdo KR-309 is a NBR modified epoxy resin showing good flexibility, adhesion strength and excellent peel strength. KR-309 is mainly used in various industrial adhesive applications including one component epoxy system. | |
| Epokukdo KR-415 | Kukdo Chemical Co., Ltd. | Epokukdo KR-415 is a NBR modified epoxy resin not containing any epoxy diluents compare with KR-309. KR-415 shows good toughness, adhesion strength and excellent peel strength at elevated temperature. KR-415 is mainly used in various industrial adhesive a...展开 Epokukdo KR-415 is a NBR modified epoxy resin not containing any epoxy diluents compare with KR-309. KR-415 shows good toughness, adhesion strength and excellent peel strength at elevated temperature. KR-415 is mainly used in various industrial adhesive applications as well as laminating usage. 收起 | |
| Epokukdo KR-450 | Kukdo Chemical Co., Ltd. | Epokukdo KR-450 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-450 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-450 is especially used ...展开 Epokukdo KR-450 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-450 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-450 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexural strength and water resistance both at the ambient temperature and at the low temperature. 收起 | |
| Epokukdo KR-818 | Kukdo Chemical Co., Ltd. | Epokukdo KR-818 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-818 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-818 is especially used ...展开 Epokukdo KR-818 is a carboxylic terminated butadiene acrylonitrile(CTBN) modified epoxy resin. Accordingly, KR-818 shows good toughness, outstanding adhesion strength and excellent T-peeling strength at the elevated temperature. KR-818 is especially used in formulating for the molding and sealing with outstanding adhesion, excellent impact strength, good flexural strength and water resistance both at the ambient temperature and at the low temperature. 收起 | |
| Epokukdo KSR-177 | Kukdo Chemical Co., Ltd. | Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poo...展开 Epokukdo KSR-177 is a high performance epoxy resin, which provides excellent adhesion to a wide range of substrates such as glass, metals, and nonferrous metals. It has been developed for strong bonding and coating on substrates that epoxy resin shows poor adhesion. KSR-177 follows the trends of lightweight using light materials. 收起 | |
| Epokukdo LGE | Kukdo Chemical Co., Ltd. | Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volat...展开 Epokukdo LGE is a reactive diluent which is glycidyl ether of a mixture of C12 - C14 aliphatic alcohols used in order to reduce the viscosity of epoxy resin. LGE is a monofunctional reactive diluent which has low toxicity, low vapor pressure and low volatile content. Also, LGE provides good flexibility and adhesion on nonpolar surfaces. Therefore, LGE can be used in various paints, floor coating, etc. 收起 | |
| Epokukdo Neotohto-P | Kukdo Chemical Co., Ltd. | Epokukdo Neotohto-P, difunctional polyglycidyl epoxide which is 100% epoxy resin provides very low viscosity, high flexibility and very clear color in combination with standard liquid epoxy resin such as YD-128. Neotohto-P is well suited as an additive in...展开 Epokukdo Neotohto-P, difunctional polyglycidyl epoxide which is 100% epoxy resin provides very low viscosity, high flexibility and very clear color in combination with standard liquid epoxy resin such as YD-128. Neotohto-P is well suited as an additive in various paints, adhesives, potting, etc. 收起 | |
| Epokukdo UME-305 | Kukdo Chemical Co., Ltd. | Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...展开 Epokukdo UME-305 is an urethane prepolymer modified liquid epoxy resin. UME-305 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| Epokukdo UME-315 | Kukdo Chemical Co., Ltd. | Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact st...展开 Epokukdo UME-315 is an Urethane prepolymer modified liquid epoxy resin. UME-315 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| Epokukdo UME-330 | Kukdo Chemical Co., Ltd. | Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact s...展开 Epokukdo UME-330 is an urethane pre-polymer modified liquid epoxy resin. UME-330 is especially used in formulating for concrete construction of floor coating and molding, and sealing with elasticity accompanied with outstanding adhesion strength, impact strength, flexible strength and water resistance. 收起 | |
| Epokukdo YD-112 | Kukdo Chemical Co., Ltd. | Epokukdo YD-112 is a Bisphenol-A type liquid epoxy resin diluted with PGE. YD-112 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-112 is generally used in high...展开 Epokukdo YD-112 is a Bisphenol-A type liquid epoxy resin diluted with PGE. YD-112 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-112 is generally used in high solid coating, floor coating, troweling application, crack injection systems, adhesives and decoupage systems. 收起 | |
| Epokukdo YD-113 | Kukdo Chemical Co., Ltd. | Epokukdo YD-113 is a Bisphenol-A type liquid epoxy resin diluted with CGE. YD-113 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-113 is generally used in high...展开 Epokukdo YD-113 is a Bisphenol-A type liquid epoxy resin diluted with CGE. YD-113 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and lower odor. YD-113 is generally used in high solid coating, floor coating, troweling application, crack injection systems, adhesives and decoupage systems. 收起 | |
| Epokukdo YD-114 | Kukdo Chemical Co., Ltd. | Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic mini...展开 Epokukdo YD-114 is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. 收起 | |
| Epokukdo YD-114E | Kukdo Chemical Co., Ltd. | Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic mi...展开 Epokukdo YD-114E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-114E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coating. 收起 | |
| Epokukdo YD-114EF | Kukdo Chemical Co., Ltd. | Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxi...展开 Epokukdo YD-114EF is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings. 收起 | |
| Epokukdo YD-114F | Kukdo Chemical Co., Ltd. | Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic...展开 Epokukdo YD-114F is a Bisphenol-A/F type liquid epoxy resin diluted with aliphatic glycidyl ether(C12-C14). YD-114EF is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-114EF is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system and high solids or low VOC industrial coatings 收起 | |
| Epokukdo YD-115E | Kukdo Chemical Co., Ltd. | Epokukdo YD-115E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether (C12-C14). YD-115E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic m...展开 Epokukdo YD-115E is a Bisphenol-A type liquid epoxy resin diluted with aliphatic glycidyl ether (C12-C14). YD-115E is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non-toxic minimum odor. YD-115E is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. 收起 | |
| Epokukdo YD-119 | Kukdo Chemical Co., Ltd. | Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is gen...展开 Epokukdo YD-119 is a Bisphenol-A type liquid epoxy resin diluted with Neotohto-E. YD-119 is recommended for non-solvent system or low VOC coating system and has excellent mechanical properties, chemical resistance and non toxic minimum odor. YD-119 is generally used in solvent free coating, floor coating, troweling application, crack injection systems, adhesives, decoupage system, and high solids or low VOC industrial coatings. 收起 | |
| Epokukdo YD-136 | Kukdo Chemical Co., Ltd. | Epokukdo YD-136 is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-136 has good adhesion, excellent mechanical properties and chemical resistance. Due to its excellent properties after curing, YD-136 is mainly recommended for ...展开 Epokukdo YD-136 is a semisolid epoxy resin for the general adhesives, coatings and moldings. YD-136 has good adhesion, excellent mechanical properties and chemical resistance. Due to its excellent properties after curing, YD-136 is mainly recommended for anti-corrosive industrial coating, marine paint, civil engineering, coal tar epoxy and various adhesives. Due to its high viscosity and higher EEW it needs less quantities of curatives and accelerators than standard liquid resin such as YD-128. 收起 | |
| Epokukdo YDB-400 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400H | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400H is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T60 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T60 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly being applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400TE70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400TE70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| EpokukdoYH-325 | Kukdo Chemical Co., Ltd. | Epokukdo YH-325 is a diluted Bisphenol-A type liquid epoxy resin with tri-functional epoxy resin(YH-300). YH-325 provides very low viscosity, low temperature curable, non-crystalline, non-yellowing and low volatile content. YH-325 can be used in solvent f...展开 Epokukdo YH-325 is a diluted Bisphenol-A type liquid epoxy resin with tri-functional epoxy resin(YH-300). YH-325 provides very low viscosity, low temperature curable, non-crystalline, non-yellowing and low volatile content. YH-325 can be used in solvent free coating, adhesives, and many high solids or low VOC industrial coatings. 收起 | |
| Polydo DP-2000 | Kukdo Chemical Co., Ltd. | Polydo DP-2000 polyether polyol is 2000 molecular weight polyether diol. It is generally used for soft flexible foam which is suitable to garment materials. It is blended with another polyols such as Polydo GY-3000 or GY-3000E to improve the property. | |
| Polydo DP-3000 | Kukdo Chemical Co., Ltd. | Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...展开 Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. 收起 | |
| Polydo DP-4000 | Kukdo Chemical Co., Ltd. | Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...展开 Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. 收起 | |
| Polydo DP-4000E | Kukdo Chemical Co., Ltd. | Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast e...展开 Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. 收起 | |
| STANLUX® Gold 12000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 12000 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 12000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13...展开 STANLUX® Gold 13000 is a fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for use in flexographic and gravure systems. STANLUX® Gold 13000 is available in several shades and has an average size of 16 microns. 收起 | |
| STANLUX® Gold 13300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 1...展开 STANLUX® Gold 13300 is a fine bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment offers opacity, gloss and printability for flexographic and gravure systems. STANLUX® Gold 13300 is available in several shades and has an average size of 12 microns. 收起 | |
| STANLUX® Gold 14000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 i...展开 STANLUX® Gold 14000 is super fine bronze powder constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment generates decorative metallic effects and is used in offset printing inks. STANLUX® Gold 14000 is available in several shades and has an average size of 5 microns. 收起 | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2100 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2100 is available in several shades and has an average size of 50 microns. 收起 | |
| STANLUX® Gold 2700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2700 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2700 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 2800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 2800 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2800 is available in several shades and has an average size of 45 microns. 收起 | |
| STANLUX® Gold 3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3500 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3500 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 3600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...展开 STANLUX® Gold 3600 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 3600 is available in several shades and has an average size of 35 microns. 收起 | |
| STANLUX® Gold 4500 (Shade D) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is rec...展开 STANLUX® Gold 4500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints, and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4500 has an average size of 30 microns and a 8% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 4600 (Shade C) | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 4600 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where high brilliance and hiding power are required. STANLUX® Gold 4600 has an average size of 30 microns and a 1.5% water retention rate with a 3.4 - 4.2 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 5500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 5500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 5500 is available in several shades and has an average size of 23 microns. It possesses a 0.5% water retention rate with a 4.2 - 6.0 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 6500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 6500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 6500 is available in several shades and has an average size of 20 microns. It possesses a 5% water retention rate with a 5.5 - 6.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Gold 7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is reco...展开 STANLUX® Gold 7500 is a bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in aerosol spray decorative paints, decorative paints and silk screen inks, and it is recommended for applications where regular surface finish and hiding power are required. STANLUX® Gold 7500 is available in several shades and has an average size of 18 microns. It possesses a 0.8% water retention rate with a 6.3 - 7.5 (cm²/g Min) water coverage property. 收起 | |
| STANLUX® Hydro 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 140 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 1% in # 325 mesh. | |
| STANLUX® Hydro 150 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Hydro 150 is a stabilized aluminium leafing paste with medium-coarse lamellar particles, recommended for use in waterborne paints. This product has a maximum retention of 4% in # 325 mesh. | |
| STANLUX® Paste 1130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in ...展开 STANLUX® Paste 1130 is a non-leafing type aluminum paste made of fine lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1130 is specially recommended for use in decorative paints, industrial paints, maintenance, protective and marine coatings, and trade paints. It has an average particle size of 11 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 120 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial...展开 STANLUX® Paste 120 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 120 commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 17 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 130N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for applic...展开 STANLUX® Paste 130N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 130N is specially recommended for application in formulations based on resins that are incompatible with aliphatic solvents and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 140 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in for...展开 STANLUX® Paste 140 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. This product has a high leafing value that adds a durable and protective property to paints. STANLUX® Paste 140 is recommended for application in formulations that require aluminium pigment with high metallic effect and is commonly used for general industrial paints, decorative and/or architectural paints, and maintenance paints. It has an average particle size of 19 microns and a minimum water coverage of 21,000 cm2/g. 收起 | |
| STANLUX® Paste 1600 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is...展开 STANLUX® Paste 1600 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600 is considered to be standard level and is recommended for paint formulations that require aluminium pigment with high metallic effect including: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. It has an average particle size of 23 microns and uses a combined solvent of MS (Mineral Spirit) and HA (High Aromatic.) 收起 | |
| STANLUX® Paste 1600N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and ...展开 STANLUX® Paste 1600N is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1600N is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 23 microns and uses a HA (High Aromatic) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 166 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paint...展开 STANLUX® Paste 166 is a leafing type aluminum paste made of medium size lamellar particles covered with stearic acid. STANLUX® Paste 166 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, industrial paints, and trade paints. It has an average particle size of 15 microns and a minimum water coverage of 22,000cm2/g. 收起 | |
| STANLUX® Paste 1700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is...展开 STANLUX® Paste 1700 is a non-leafing type aluminum paste made of lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1700 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level...展开 STANLUX® Paste 1770 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1770/60 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard...展开 STANLUX® Paste 1770/60 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1770/60 is considered to be standard level and is recommended for formulation systems with low tolerance to aliphatic solvent. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. STANLUX® Paste 1770/60 has the same characteristics of Stanlux Paste 1770 with 60% of solids. Applications include: aerosol spray decorative paints, industrial paints, maintenance paints, protective and marine coatings, and trade paints. 收起 | |
| STANLUX® Paste 1870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level...展开 STANLUX® Paste 1870 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 1870 is considered to be standard level and is recommended for systems requiring differentiated metallic finishes, brighter color, and high hiding power. It has an average particle size of 16 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: aerosol spray decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade pai...展开 STANLUX® Paste 200 is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200 is recommended for application in high grade and brilliant protective paints and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level...展开 STANLUX® Paste 2000 is a non-leafing type aluminum paste made of medium lamellar particles covered with oleic acid that provides differentiated effects that add a metallic shine to the applied system. STANLUX® Paste 2000 is considered to be standard level and is recommended for systems requiring differentiated metallic effects, and brighter metallic pigment. It has an average particle size of 21 microns and uses a HA (High Aromatic) and MS (Mineral Spirit) solvent. Applications include: decorative paints, industrial paints, and trade paints. 收起 | |
| STANLUX® Paste 200N | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paint...展开 STANLUX® Paste 200N is a leafing type aluminum paste made of lamellar particles covered with stearic acid. STANLUX® Paste 200N is recommended for application in products requiring high covering power and is commonly used for decorative paints, trade paints, and printing inks. It has an average particle size of 14 microns and a minimum water coverage of 20,000 cm2/g. 收起 | |
| STANLUX® Paste 260 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing in...展开 STANLUX® Paste 260 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 260 is specially recommended for printing inks and is commonly used for aerosol spray decorative paints, flexographic printing inks, and gravure printing inks. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 266 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints,...展开 STANLUX® Paste 266 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 266 is specially recommended for high grade and brilliant printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 14 microns and a minimum water coverage of 28,000 cm2/g. 收起 | |
| STANLUX® Paste 270/70 IPA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recomme...展开 STANLUX® Paste 270/70 IPA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 270/70 IPA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 11 microns and a minimum water coverage of 30,000 cm2/g. 收起 | |
| STANLUX® Paste 280 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic ...展开 STANLUX® Paste 280 is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid. STANLUX® Paste 280 is specially recommended for high grade printing inks and is commonly used for aerosol spray decorative paints, flexographic and gravure printing inks that require aluminium pigment with a high metallic effect. It has an average particle size of 12 microns and a minimum water coverage of 34,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60EA | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended f...展开 STANLUX® Paste 290 60EA is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is suitable with solvent for high grade printing inksthat require low odour property. STANLUX® Paste 290 60EA is specially recommended for printing inks and is commonly used for flexography and gravure free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 290 60MO | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly u...展开 STANLUX® Paste 290 60MO is a leafing type aluminum paste made of fine lamellar particles covered with stearic acid and is formulated for high-grade offset printing inks. STANLUX® Paste 290 60MO is specially recommended for printing inks and is commonly used for offset printing ink free of residual solvent odour. It has an average particle size of 9 microns and a minimum water coverage of 45,000 cm2/g. 收起 | |
| STANLUX® Paste 340 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for ...展开 STANLUX® Paste 340 is a leafing type aluminum paste made of coarse lamellar particles covered with stearic acid that provide a reflection effect or barrier protection. STANLUX® Paste 340 is specially recommended for printing inks and is commonly used for maintenance, protective and marine coatings, and roof coatings. It has an average particle size of 21 microns and a minimum water coverage of 9,000 cm2/g. 收起 | |
| STANLUX® Pell Gold 130 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展开 STANLUX® Pell Gold 130 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is available is several shades and is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Pell Gold 131 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to appl...展开 STANLUX® Pell Gold 131 is a fine bronze powder pigment in pellet form, that disperses in solvents like ethyl acetate or ethyl alcohol and eliminates dust during handling. It has an average particle size of 16 microns and provides opacity and gloss to applied systems. STANLUX® Pell Gold 130 is recommended for use in flexographic and gravure printing inks. 收起 | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展开 STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展开 STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展开 STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...展开 STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展开 STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...展开 STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. 收起 | |
| STANLUX® Silver 3871 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an aver...展开 STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. 收起 | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...展开 STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. 收起 |
