1,8-Naphthalic Anhydride | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 辽宁联港染料化工有限公司 | 1,8-萘二甲酸酐是一种重要的原材料,用于合成二萘嵌苯染料、颜料和荧光剂。 | |
1,8-Naphthostyril | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 辽宁联港染料化工有限公司 | 一个中间体,用于合成还原性染料和有机颜料 | |
3,4,9,10-Perylenetetracarboxylic Dianhydride | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 辽宁联港染料化工有限公司 | 3,4,9,10-苝四酸二酐是一种重要的中间体,用于合成二萘嵌苯染料和颜料。 | |
3,5-Xylidine | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 辽宁联港染料化工有限公司 | 颜料、染料和医药工业的中间体 | |
4-Sulpho-1,8-Naphthalic Anhydride, Potassium Salt | Liaoning Liangang Pigment & Dyestuff Chemicals Co., Ltd. 辽宁联港染料化工有限公司 | 合成染料、颜料的重要原料 | |
AEPD® VOX 1000 | ANGUS Chemical Company 安格斯化学公司 | 一个新的多官能团添加剂,用于低气味,零VOC户内水性油漆。它具有非常温和的气味,高沸点和低蒸汽压。这些特点使之成为需要符合EU directive 2004/42/EC法规的油漆生产商一个理想的配方工具 | |
ALKATERGE®-T | ANGUS Chemical Company 安格斯化学公司 | ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...展开 ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. 收起 | |
AMP® | ANGUS Chemical Company 安格斯化学公司 | 这是一种无色,低粘度流体,大量用于金属加工流体,涂料,锅炉水体系和个人护理等领域。它可用作中和树脂的胺,协同分散剂,脱甲醛剂,腐蚀抑制剂以及作为合成的原料。 | |
AMP-95® | ANGUS Chemical Company 安格斯化学公司 | 被普遍认为是一种用于所有类型的乳胶漆的多功能添加剂。 | |
AVANTANE® PA 4000 | ANGUS Chemical Company 安格斯化学公司 | 一种专门设计用于满足溶剂型轮转凹印和柔印印刷性能要求的添加剂。 | |
BR 100 P | Arkema Rheology & Specialty Additives | BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints,...展开 BR 100 P is a water soluble non ionic polyurethane thickener suitable to thicken anionic and non ionic emulsions and particularly styrene acrylics, vinyl-acrylics and other copolymers. It is used in semil-gloss, interior and exterior flat emulsion paints, anticorrosion paints and adhesives. 收起 | Request Sample |
BR 125 NPF | Arkema Rheology & Specialty Additives | BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are...展开 BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are gloss emulsion paints, semi-gloss, flat dispersion paints. Formulation of anticorrosive paints or adhesives can also be based on BR 125 NPF. 收起 | Request Sample |
Coadis™ 123 K | Arkema Rheology & Specialty Additives | Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-born...展开 Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-borne systems. 收起 | Request Sample |
Coadis™ 144 A | Arkema Rheology & Specialty Additives | Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized...展开 Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow and wet adhesion from flat to high gloss systems. 收起 | Request Sample |
Coadis™ 173 | Arkema Rheology & Specialty Additives | Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations s...展开 Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations showing high rates of mineral pigments and requiring a limited water absorption. Also suitable for oxide pigments and more specifically zinc oxides. 收起 | Request Sample |
Coadis™ 234 K | Arkema Rheology & Specialty Additives | Coadis™ 234 K is a synthetic versatile dispersant for waterborne systems. Its use is recommended for a wide application field, including flat to glossy dispersion paints, thick film coating and plasters, and also organic pigment pastes (e;g. carbon black ...展开 Coadis™ 234 K is a synthetic versatile dispersant for waterborne systems. Its use is recommended for a wide application field, including flat to glossy dispersion paints, thick film coating and plasters, and also organic pigment pastes (e;g. carbon black dispersion). 收起 | Request Sample |
Coadis™ 335 A | Arkema Rheology & Specialty Additives | Coadis™ 335 A has been especially designed to quickly and efficiently disperse the pigments and fillers commonly utilized in waterborne traffic paints. | Request Sample |
Coadis™ 3412 | Arkema Rheology & Specialty Additives | Coadis™ 3412 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
Coadis™ 352 N | Arkema Rheology & Specialty Additives | Coadis™ 352 N is a water-based synthetic polycarboxylate dispersant that has been specially designed to quickly and efficiently produce pigments and fillers. Coadis™ 352 N ensures the stability of the paint while not impacting drying time. | Request Sample |
Coadis™ 615 | Arkema Rheology & Specialty Additives | Coadis™ 615 is a water-based synthetic polycarboxylate dispersant that has been specially designed for industrial coatings and reactive binder systems. | Request Sample |
Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...展开 Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. 收起 | Request Sample |
Coadis™ A 122 | Arkema Rheology & Specialty Additives | Coadis™ A 122 is a dispersing agent based on a carboxylated polymer and especially designed for aqueous systems containing zinc oxides. | Request Sample |
Coadis™ BR 3 | Arkema Rheology & Specialty Additives | Coadis™ BR 3 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
Coadis™ BR 40 | Arkema Rheology & Specialty Additives | Coadis™ BR 40 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
Coadis™ BR 85 | Arkema Rheology & Specialty Additives | Coadis™ BR 85 is a unique dispersant solution deflocculation and steric stabilisation of Titanium Dioxide and other fine high value pigments. It is based on Coatex proprietary Bumper Technology™. | Request Sample |
Coapur™ 2020 W | Arkema Rheology & Specialty Additives | Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheo...展开 Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2020 W is a pure associative thickener. It is designed to interact strongly with the blinder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2020 W helps to match the highest coating quality possible for water-based formulations. 收起 | Request Sample |
Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
Coapur™ 2501 | Arkema Rheology & Specialty Additives | Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film bu...展开 Coapur™ 2501 is a non-ionic, associative and solvent free polyurethane (HEUR) rheology modifier providing a pure Newtonian rheology to water-borne systems. Coapur™ 2501 allows to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and levelling together flexibility of use. 收起 | Request Sample |
Coapur™ 2740 | Arkema Rheology & Specialty Additives | Coapur™ 2740 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water based formulations. Coapur™ 2740 can be used sole or in combination either with other polyurethane thickeners or with any type of rheolo...展开 Coapur™ 2740 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water based formulations. Coapur™ 2740 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2740 is a pure associative thickener. It is designed to interact strongly with the binder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2740 helps to match the highest coating quality possible for water-based formulations. 收起 | Request Sample |
Coapur™ 3020 | Arkema Rheology & Specialty Additives | Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures ex...展开 Coapur™ 3020 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology to water-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
COAPUR™ 3020 BB | Arkema Rheology & Specialty Additives | COAPUR™ 3020 BB is a 90% bio-based HEUR thickener. It is a solvent-free and APEO free associative polyurethane thickener. It provides a Newtonian rheology to water-borne systems. It allows the adjustment of high shear viscosities and thus ensures excellen...展开 COAPUR™ 3020 BB is a 90% bio-based HEUR thickener. It is a solvent-free and APEO free associative polyurethane thickener. It provides a Newtonian rheology to water-borne systems. It allows the adjustment of high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
Coapur™ 3025 | Arkema Rheology & Specialty Additives | Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures exc...展开 Coapur™3025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides a pure Newtonian rheology t owater-borne systems. It allow to adjust selectively high shear viscosities and thus ensures excellent film build, spatter resistance and leveling together with low dosage and flexibility of use. 收起 | Request Sample |
Coapur™ 4820 | Arkema Rheology & Specialty Additives | Coapur™ 4820 is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water based formulations, especially the solvent free formulations. Coapur™ 4820 can be used sole or in combination either with other polyure...展开 Coapur™ 4820 is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water based formulations, especially the solvent free formulations. Coapur™ 4820 can be used sole or in combination either with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. Coapur™ 4820 provides excellent coating properties due to its high associative effectiveness with every kind of binder. Coapur™ 4820 increases specifically the viscosities at medium and high shear rates in order to improve tool load, film build, levelling and brush drag. Thanks to its exclusive rheological features, Coapur™ 4820 also prevents from settling and sagging tendency in low PVC formulations. 收起 | Request Sample |
Coapur™ 520 W | Arkema Rheology & Specialty Additives | Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve s...展开 Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve significantly spattering resistance while offering also some antisettling properties. Furthermore, it provides very good response and efficiency in VAE binders. This new polyurethane thickener could therefore easily replace the use of a combination of high-shear and low-shear thickeners. 收起 | Request Sample |
Coapur™ 5535 | Arkema Rheology & Specialty Additives | Coapur™ 5535 is a solvent - and emission-free associative non ionic thickener designed to provide a high thickening effectiveness in water-borne coatings based on the most recent solvent-free binders (e.g. terpolymers). Coapur™ 5535 use is therefore very ...展开 Coapur™ 5535 is a solvent - and emission-free associative non ionic thickener designed to provide a high thickening effectiveness in water-borne coatings based on the most recent solvent-free binders (e.g. terpolymers). Coapur™ 5535 use is therefore very cost-effective in matt and semi-gloss dispersion paints, where properties such as in-can structure, brushability and film build are needed. 收起 | Request Sample |
Coapur™ 6050 | Arkema Rheology & Specialty Additives | Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear ra...展开 Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear rates. 收起 | Request Sample |
Coapur™ 817 BB | Arkema Rheology & Specialty Additives | Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展开 Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. 收起 | Request Sample |
Coapur™ 817 W | Arkema Rheology & Specialty Additives | Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展开 Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. 收起 | Request Sample |
Coapur™ 830 W | Arkema Rheology & Specialty Additives | Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...展开 Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. It is a 30% solids version of Coapur™ 817 W. 收起 | Request Sample |
Coapur™ 975 W | Arkema Rheology & Specialty Additives | Coapur™ 975 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...展开 Coapur™ 975 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. 收起 | Request Sample |
Coapur™ 980 W | Arkema Rheology & Specialty Additives | Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...展开 Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. 收起 | Request Sample |
Coapur™ XS 12 | Arkema Rheology & Specialty Additives | Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheo...展开 Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. 收起 | Request Sample |
Coapur™ XS 22 | Arkema Rheology & Specialty Additives | Coapur™ XS 22 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It has been especially designed to offer a good reactivity with alkyd emulsion systems. | Request Sample |
Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits vi...展开 Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage and enables to match excellent results based on rub-out test. 收起 | Request Sample |
Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...展开 Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. 收起 | Request Sample |
CRAYVALLAC® 60P | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating sy...展开 CRAYVALLAC® 60P is a solid powder wax consisting of fine particles of oxidized polyethylene recommended to prevent irreversible hard settling. The fine nature of this dispersion means that CRAYVALLAC® 60P is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. CRAYVALLAC® 60P can generally be used in most solvent-based formulations. Typical applications are epoxy primers, vinyl primers, anti-fouling paints, road marking paints and chlorinated rubber coatings. 收起 | Request Sample |
CRAYVALLAC® 60X | Arkema Rheology & Specialty Additives | CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used i...展开 CRAYVALLAC® 60X is a waxy solid paste consisting of very fine droplets of oxidized polyethylene dispersed in xylene. The fine nature of this dispersion means that CRAYVALLAC® 60X is easily incorporated and activated in coating systems. It is mainly used in industrial and maintenance coatings where its primary function is to provide pigment suspension without any increase in the apparent viscosity. 收起 | Request Sample |
CRAYVALLAC® A-2201-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has be...展开 CRAYVALLAC® A-2201-M is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-2201-M is suitable for use in a wide range of solvent based systems and applications. CRAYVALLAC® A-2201-M has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film effects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. CRAYVALLAC® A-2201-M can be used as well as an air release agent in solvent-based high solids systems applied by airless spray. 收起 | Request Sample |
CRAYVALLAC® A-2678-M | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film forma...展开 CRAYVALLAC® A-2678-M is a high performance acrylic dispersing and flow control agent for the control of coating surface properties. CRAYVALLAC® A-2678-M has been developed specifically to eliminate film surface defects that may occur during the film formation. The following benefits are to be gained by using CRAYVALLAC® A-2678-M in water based coatings: Enhanced substrate wetting and coating leveling, Reduced craters, fisheyes and pinhole. The results of these enhancements are smoother films with fewer imperfections and a superior overall appearance (measurable with glow and DOI) when compared with the unmodified coating. 收起 | Request Sample |
CRAYVALLAC® A-620-A2 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has bee...展开 CRAYVALLAC® A-620-A2 is a high performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-620-A2 is suitable for use in a wide range of solvent based systems and applications.CRAYVALLAC® A-620-A2 has been developed specifically to enhance substrate wetting and to improved leveling. As a result when compared with unadditivated coating, film deffects such as craters, fisheyes, orange peel and pinholes are reduced and a superior overall appearance of the film is visible. 收起 | Request Sample |
CRAYVALLAC® A-72-A2-60 | Arkema Rheology & Specialty Additives | CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 ...展开 CRAYVALLAC® A-72-A2-60 is a high-performance polyacrylate surface tension modifier for the control of coating surface properties. CRAYVALLAC® A-72-A2-60 is suitable for use in a wide range of solvent-based systems and applications. CRAYVALLAC® A-72-A2-60 has been developed specifically to enhance substrate wetting and to improved leveling. As a result, when compared with unactivated coating, film defects such as craters, fisheyes, orange peel, and pinholes are reduced and a superior overall appearance of the film is visible with no degradation of the exterior durability. 收起 | Request Sample |
CRAYVALLAC® ANTISETTLE CVP | Arkema Rheology & Specialty Additives | CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent contro...展开 CRAYVALLAC® ANTISETTLE CVP is a 100 % active and bio-sourced castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® ANTISETTLE CVP is suited to coating systems based on aliphatic hydrocarbons. It shows excellent control of sedimentation combined with ease of application. In addition to coatings applications, CRAYVALLAC® ANTISETTLE CVP has also been used successfully in a multitude of other applications such as inks, adhesives, mastics, caulks, sealants, fillers, greases and lubricants. 收起 | Request Sample |
CRAYVALLAC® D-801 | Arkema Rheology & Specialty Additives | CRAYVALLAC® D-801 is a high molecular weight wetting and dispersing agent for solvent-based coatings and pigment concentrates. CRAYVALLAC® D-801 is supplied as a solution of block copolymers with pigment anchorage groups. | Request Sample |
CRAYVALLAC® EF 30P | Arkema Rheology & Specialty Additives | CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALL...展开 CRAYVALLAC® EF 30P is a low molecular weight styrene-maleic anhydride copolymer with an approximate 3:1 mole ratio. It is used as a matting agent in epoxy or epoxy/polyester powder coating formulations. Excellent results are obtained by combining CRAYVALLAC® EF 30P with REAFREE 6489-TS, Carboxylated Polyester resin. The very good colour stability of formulations containing CRAYVALLAC® EF 30P as matting additive, enables the production of low gloss white and pale colour paints. CRAYVALLAC® EF 30P has been developed specifically to provide matting effect in powder coatings. 收起 | Request Sample |
CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...展开 CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. 收起 | Request Sample |
CRAYVALLAC® FLOW-100 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings...展开 CRAYVALLAC® FLOW-100 is a high performance acrylic flow and levelling agent for the control of coating surface properties. It enhances substrate wetting and improves flow and levelling properties. The following benefits are of interest for powder coatings and coatings in general e.g. solvent-based, high solids and solvent-free. 收起 | Request Sample |
CRAYVALLAC® FLOW-200 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film format...展开 CRAYVALLAC® Flow-200 is a high performance polyester based flow and levelling agent for the control of coating surface properties. CRAYVALLAC® Flow-200 has been developed specifically to eliminate film surface defects that may occur during the film formation. 收起 | Request Sample |
CRAYVALLAC® FLOW-400 | Arkema Rheology & Specialty Additives | CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is...展开 CRAYVALLAC® Flow-400 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on Acrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® Flow-400 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® Flow-400 is soluble in many solvents such as ketones, aromatics, mineral spirits, esters, glycol ethers and chlorinated hydrocarbons. CRAYVALLAC® Flow-400 is easily incorporated into formulations due to its wide compatibility and good solubility in most solvents. In Powder coatings, it is recommended to introduce the CRAYVALLAC® Flow-400 by hot blend or even dry blend. The method of incorporating CRAYVALLAC® Flow-400 into coating formulation does not affect the performance of the coating as long as it is uniformly dispersed in the system. This can be achieved by thoroughly mixing it with the other paint ingredients or by master batching the product in a base resin. 收起 | Request Sample |
CRAYVALLAC® FLOW-450 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-45...展开 CRAYVALLAC® FLOW-450 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-450 is also used as an adhesion promoter additive with excellent performance. CRAYVALLAC® FLOW-450 can furthermore successfully substitute classical defoamers within a formulation, demonstrating combined performance in terms of leveling and defoaming. CRAYVALLAC® FLOW-450 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-450 in the mill-base in order to get maximum efficiency in terms of air release properties. 收起 | Request Sample |
CRAYVALLAC® FLOW-465 | Arkema Rheology & Specialty Additives | CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-46...展开 CRAYVALLAC® FLOW-465 is used to improve flow and eliminate air entrapment, orange peel, pinholes, craters and other surface defects. It is an additive based on polyacrylate technology to provide excellent ageing resistance to coatings. CRAYVALLAC® FLOW-465 is easily incorporated into formulations due to its wide compatibility in most solvents. It is recommended to incorporate CRAYVALLAC® FLOW-465 in the mill-base in order to get maximum efficiency in terms of air release properties. 收起 | Request Sample |
CRAYVALLAC® LA-150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-150 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to medium to high polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
CRAYVALLAC® LA-250 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-250 is a pourable liquid rheology modifier supplied in Dimethylsulfoxide (DMSO) for post addition to low polarity solvent based coatings. It shows excellent control of sedimentation combined with ease of application. | Request Sample |
CRAYVALLAC® LA-377 | Arkema Rheology & Specialty Additives | CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitab...展开 CRAYVALLAC® LA-377 is a modified urea dissolved in DMSO. CRAYVALLAC® LA-377 is a pourable liquid rheology modifier for post addition to water-based coatings such as water-dilutable alkyds and acrylic emulsions. It was developed to ensure particular suitability for metal coating as its formula is lithium chloride-free. CRAYVALLAC® LA-377 should be added to the coating as a slow stream under low to medium shear conditions to ensure sufficient dispersion. Although efficient stirring is required to ensure homogeneity, elevated temperatures are not required for activation and the use of excessive shear should be avoided. 收起 | Request Sample |
CRAYVALLAC® LV | Arkema Rheology & Specialty Additives | CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It impart...展开 CRAYVALLAC® LV is a 100 % active and highly bio-sourced polyamide rheology modifier designed for very high solids and solvent-free systems. It features the strongest shear thinning and is therefore highly recommended to achieve very thick films. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® MT | Arkema Rheology & Specialty Additives | CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromati...展开 CRAYVALLAC® MT is a 100 % active and highly bio-sourced modified castor derivative rheology modifier for solvent-based and solvent-free systems. CRAYVALLAC® MT is suited to coating systems based on aliphatic hydrocarbons, aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. It shows excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® Optima | Arkema Rheology & Specialty Additives | CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application f...展开 CRAYVALLAC® Optima is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based and solvent-free epoxy coatings. It is also recommended in top coat and direct to metal application for its smoother viscosity resulting in good compromise between levelling and sag resistance. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® PA3 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to sol...展开 CRAYVALLAC® PA3 BA 20 is a HAPs-free alternative to CRAYVALLAC® PA3 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. 收起 | Request Sample |
CRAYVALLAC® PA3 WDA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscos...展开 CRAYVALLAC® PA3 WDA 20 is a pre-activated amide wax supplied in a mixture of mineral spirit (D60) and alcohols. Under paste form for post-addition to solvent-based low polarity coating systems, it provides a shear-thinning rheology with thixotropic viscosity recovery to coating formulations. In coating systems, its crystalline fibres form an interacting network which gives rise to the shear-thinning rheology of the final coating. It provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. Immediately following application, the coating’s viscosity undergoes a time dependent recovery as the network re-establishes itself. This time dependence is known as thixotropy and enables the final coating to attain very good levelling. 收起 | Request Sample |
CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...展开 CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
CRAYVALLAC® PA3 XAF 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres...展开 CRAYVALLAC® PA3 XAF 20 is an alcohol-free pre-activated amide wax supplied in xylene. It is a rheology modifier in paste form with high efficiency (optimum sag resistance and viscosity). CRAYVALLAC® PA3 XAF 20 is supplied in the form of crystalline fibres. In a coating system, these fibres form an interacting network. This network gives rise to the shear thinning rheology of the final coating. This shear thinning characteristic provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® PA4 BA 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for p...展开 CRAYVALLAC® PA4 BA 20 is a HAPs-free (e.g. Xylene free) alternative to CRAYVALLAC® PA4 X 20. This rheology modifier is composed of a pre-activated amide wax dispersed in a mixture of butyl acetate and alcohol. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings. CRAYVALLAC® PA4 BA 20 is especially suited to coatings demanding a higher degree of surface gloss or transparency. 收起 | Request Sample |
CRAYVALLAC® PA4 WDA 12 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA ...展开 CRAYVALLAC® PA4 WDA 12 is a pre-activated amide wax dispersed in a mixture of mineral spirit (D60) and alcohols. It is a rheology modifier in paste form for post addition to solvent-based coatings with low polarity systems. The use of CRAYVALLAC® PA4 WDA 12 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
CRAYVALLAC® PA4 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 p...展开 CRAYVALLAC® PA4 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA4 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. 收起 | Request Sample |
CRAYVALLAC® PA5 XSR 25 | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...展开 CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® PC | Arkema Rheology & Specialty Additives | CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusi...展开 CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. 收起 | Request Sample |
CRAYVALLAC® PF | Arkema Rheology & Specialty Additives | CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF f...展开 CRAYVALLAC® PF is a modified micronised hydrogenated castor oil rheology modifier specially designed to facilitate the incorporation in powder form for better activation and easier handling. The activation process is the conversion of the CRAYVALLAC® PF fine particles to an interacting network of fibers. It is this network that gives rise to the final system’s shear thinning rheology. This shear-thinning behavior provides a very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. CRAYVALLAC® PF is suitable for a multitude of applications. 收起 | Request Sample |
CRAYVALLAC® REV | Arkema Rheology & Specialty Additives | CRAYVALLAC® REV is a Polyamide rheology additive that provides excellent sag resistance and high performance in industrial paints. The bio-based CRAYVALLAC® REV enables to reduce customer constraints by improving robustness and efficiency. Furthermore, it...展开 CRAYVALLAC® REV is a Polyamide rheology additive that provides excellent sag resistance and high performance in industrial paints. The bio-based CRAYVALLAC® REV enables to reduce customer constraints by improving robustness and efficiency. Furthermore, its versatility makes it the perfect universal tool to develop standard to very high solids coatings that rely less on processing conditions and formulations types. 收起 | Request Sample |
CRAYVALLAC® SF | Arkema Rheology & Specialty Additives | CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydro...展开 CRAYVALLAC® SF is a proprietary amide-modified hydrogenated castor oil rheology modifier with an enhanced tolerance to temperature and solvent strength suitable for a variety of different solvent-based systems e.g. aromatic hydrocarbons and aromatic hydrocarbon/alcohol blends. Compared to other hydrogenated castor oil based rheology modifiers, CRAYVALLAC® SF is more tolerant to strong solvents and high processing temperatures due to the presence of its unique performance enhancing amide. The activation process constitutes the conversion of the CRAYVALLAC® SF particles to an interacting network of fibre-like particles. It is this network that gives rise to the final coating’s shear thinning rheology. This shear thinning characteristic providesa very high viscosity under the low shear rates associated with sedimentation, and a low viscosity at the much higher application shear rates. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® SL | Arkema Rheology & Specialty Additives | CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL pa...展开 CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLT | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the ra...展开 CRAYVALLAC® SLT is a 100% active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLW | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...展开 CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SLX | Arkema Rheology & Specialty Additives | CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...展开 CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. 收起 | Request Sample |
CRAYVALLAC® SUPER | Arkema Rheology & Specialty Additives | CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net...展开 CRAYVALLAC® SUPER is a 100 % active and highly bio-sourced polyamide rheology modifier suitable for a wide range of solvent-based, high-solids and solvent-free applications. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® ULTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result...展开 CRAYVALLAC® ULTRA is a 100 % active and highly bio-sourced polyamide rheology modifier offering very good recoatability for ambient curing solvent-based epoxy coatings. It imparts shear thinning rheology with thixotropic viscosity recovery. The net result is excellent control of sedimentation combined with ease of application. 收起 | Request Sample |
CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...展开 CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. 收起 | Request Sample |
CRAYVALLAC® WN-1150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1150 is used to control gloss between 30 – 60% for epoxy/polyester hybrid, HAA and TGIC based polyester powder coatings. It shows no effect on weather ability or physical properties. | Request Sample |
CRAYVALLAC® WN-1265 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the a...展开 CRAYVALLAC® WN-1265 is a micronised amide wax. In liquid coatings, CRAYVALLAC® WN-1265 is primarily used to enhance the sandability of Solvent based or Water Based Wood primers and sealers. An additional advantage to be gained in this application is the absence of bloom when used in acid cured formulations. CRAYVALLAC® WN-1265 is also an effective internal lubricant for plastic compounding. In powder coatings, CRAYVALLAC® WN-1265 improves degassing properties and allows high thickness applications of HAA cured paints, even on difficult substrates. 收起 | Request Sample |
CRAYVALLAC® WN-1442 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1442 is an additive for use in liquid coatings to enhance surface properties such as scratch and abrasion resistance. Its fine particle size distribution is providing enhanced performance and ease of incorporation | Request Sample |
CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...展开 CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. 收起 | Request Sample |
CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...展开 CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. 收起 | Request Sample |
CRAYVALLAC® WN-1875 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly us...展开 CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance and light stability are most favourable with this product. 收起 | Request Sample |
CRAYVALLAC® WN-2950 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...展开 CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. 收起 | Request Sample |
CRAYVALLAC® WN-3025 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...展开 CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. 收起 | Request Sample |
CRAYVALLAC® WS-4700 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provide...展开 CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. 收起 | Request Sample |
CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...展开 CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. 收起 | Request Sample |
CRAYVALLAC® WW-9500 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provid...展开 CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. It also retards the settlement of pigments and assists in their redispersion. 收起 | Request Sample |
Dibutyl Phthalate (DBP) | Regar Chemicals Co., Ltd. | Dibutyl Phthalate (DBP) is a transparent, colorless oily liquid used in nitrocellulose and alkyd resin paints. DBP is also an excellent plasticizing agent and used especially PVC, aldolresin and ethyl cellulose. | |
Diisobutyl Phthalate (DIBP) | Regar Chemicals Co., Ltd. | Diisobutyl Phthalate (DIBP) is a colorless transparent oily liquid used as an alternative to DBP (Dibutyl Phthalate). It is used in nitrocellulose and alkyd resin paints. | |
Diisononyl Phthalate (DINP) | Regar Chemicals Co., Ltd. | Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging ...展开 Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging resistance. 收起 | |
Dioctyl Phthalate(DOP) | Regar Chemicals Co., Ltd. | Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good ...展开 Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good conductance properties. 收起 |