| 2-Ethylhexanoic Acid | Penpet Petrochemical Trading GmbH | 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventio...展开 2-Ethylhexanoic Acid, in the form of a dense, clear, colourless to yellow liquid with a faint odour, is a catalyst that can be used in the dye and paint, and printing ink industry. This product is insoluble in water but is soluble in almost all conventional solvents. Most of its siccatives are metal salts that can be used as drying agents. 收起 | |
| 20° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petro...展开 20° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm. 20° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 22° Bé Muriatic Acid (HCl) - Technical Grade | Occidental Chemical Corp. (OxyChem) | 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petrol...展开 22° Bé Muriatic Acid (HCl) - Technical Grade is a colorless, clear, liquid which has an irritating, pungent, sharp odor. This product has an arsenic level of 0.5 ppm and an Iron level of 3 ppm.22° Bé Muriatic Acid (HCl) - Technical Grade is used in petroleum wells, ore reduction, food processing, pickling, metal cleaning, and pH adjustment. 收起 | |
| 3-(Trimethoxysilyl)propyl Glycidyl Ether | Penpet Petrochemical Trading GmbH | 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled...展开 3-(Trimethoxysilyl)propyl Glycidyl Ether, in the form of a clear, pale yellow liquid, is an epoxy-functional silane that can be used in polyurethane caulks and sealants. This product can also be used as a coupling agent in polysulfides, in mineral-filled or glass-reinforced thermosets and thermoplastics. 收起 | |
| Acetone | Penpet Petrochemical Trading GmbH | Acetone, in the form of a colourless, clear liquid, is a basic raw material in the chemical industry that can be used in paint thinner. This product is soluble in water and is usually used as a laboratory solvent. | |
| Adipic Acid | Penpet Petrochemical Trading GmbH | Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the syn...展开 Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the synthesis of polyetherpolyole for polyurethane systems and for thermoplastic polyurethane. 收起 | |
| Carbon Tetrachloride | Occidental Chemical Corp. (OxyChem) | Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemica...展开 Carbon Tetrachloride is a clear, colorless liquid which has an odor threshold of 50 ppm. This product has a specific gravity of between 1.588 and 1.59 and a distillation range of between 1 and 76.7 degrees Celsius. Carbon Tetrachloride is a in the chemical process of a variety of industrial applications. 收起 | |
| Caustic Potash 45% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic...展开 Caustic Potash 45% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 45 and 46 and a sodium level of 2500 ppm. Caustic Potash 45% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash 50% Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Pot...展开 Caustic Potash 50% Membrane is a colorless, clear liquid which is odorless and the largest-volume potassium chemical for non-fertilizer use. This product has a total alkalinity weight percentage of between 50 and 51 and an iron level of 2 ppm. Caustic Potash 50% Membrane is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial operations. 收起 | |
| Caustic Potash Crystal | Occidental Chemical Corp. (OxyChem) | Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, d...展开 Caustic Potash Crystal is a white to off-white, odorless solid which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and a nickel level of 4 ppm. Caustic Potash Crystal is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Potash Flake | Occidental Chemical Corp. (OxyChem) | Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, deterg...展开 Caustic Potash Flake is a white to off-white, odorless flake which has a strong alkali level. This product has a hydroxide alkalinity weight percentage of 90 and an iron level of 3 ppm. Caustic Potash Flake is used in fertilizers, batteries, soaps, detergents, specialty glasses, and other industrial applications. 收起 | |
| Caustic Soda 50% Liquid Diaphragm | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is use...展开 Caustic Soda 50% Liquid Diaphragm is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Diaphragm - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid D...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.6 and an iron level of 9 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liqu...展开 Caustic Soda 50% Liquid Diaphragm - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.36 and 39.5 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Diaphragm - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane - West Coast | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid...展开 Caustic Soda 50% Liquid Membrane - West Coast is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 37.5 and 39.5 and a nickel level of 0.5 ppm. Caustic Soda 50% Liquid Membrane - West Coast is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Caustic Soda 50% Liquid Membrane Blended | Occidental Chemical Corp. (OxyChem) | Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Memb...展开 Caustic Soda 50% Liquid Membrane Blended is a colorless to slightly colored, clear to opaque liquid which is odorless. This product has total alkalinity weight percentage of between 38.3 and 39.9 and a copper level of 0.3 ppm. Caustic Soda 50% Liquid Membrane Blended is used in pulp, paper, aluminum, soaps, detergents, textiles, petrochemicals, and chemical processing industries. 收起 | |
| Chloroform – Alcohol Stabilized Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Gra...展开 Chloroform – Alcohol Stabilized Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.476 and 1.480 and a chloroform volume percentage of between 99 and 99.5. Chloroform – Alcohol Stabilized Grade is used as a solvent in the extraction and purification of various pharmaceutical products. 收起 | |
| Chloroform – Fluorocarbon Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant...展开 Chloroform – Fluorocarbon Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a chloroform weight percentage of 99.9. Chloroform – Fluorocarbon Grade is used as a refrigerant for residential air conditioners and commercial refrigeration. 收起 | |
| Chloroform – Technical Grade | Occidental Chemical Corp. (OxyChem) | Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as...展开 Chloroform – Technical Grade is a colorless, clear liquid which has a mildly sweet odor. This product has a specific gravity of between 1.481 and 1.485 and a distillation range of between 1 and 61.2 degrees Celsius. Chloroform – Technical Grade is used as a chemical intermediate in the preparation of dyes, plastics, resins, and pesticides. 收起 | |
| Dechlorane Plus 25 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants ...展开 Dechlorane Plus 25 is a white, free-flowing, odorless powder which has an average particle size of 6 microns. This product has a pH value of between 6 and 8 and a volatility of 0.12 percent. Dechlorane Plus 25 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 35 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame...展开 Dechlorane Plus 35 is a white, free-flowing, odorless powder which has an average particle size of 3.5 microns. This product has a melting point of 350 degrees Celsius and specific gravity of 1.8 g/cm3. Dechlorane Plus 35 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dechlorane Plus 515 | Occidental Chemical Corp. (OxyChem) | Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardant...展开 Dechlorane Plus 515 is a white, free-flowing, odorless powder which has an average particle size of 15 microns. This product has a pH value of between 6 and 8 and a molecular weight of 653.7. Dechlorane Plus 515 is used as non-plasticizing flame retardants in polymeric systems. 收起 | |
| Dibutyl Phthalate (DBP) | Regar Chemicals Co., Ltd. | Dibutyl Phthalate (DBP) is a transparent, colorless oily liquid used in nitrocellulose and alkyd resin paints. DBP is also an excellent plasticizing agent and used especially PVC, aldolresin and ethyl cellulose. | |
| Diisobutyl Phthalate (DIBP) | Regar Chemicals Co., Ltd. | Diisobutyl Phthalate (DIBP) is a colorless transparent oily liquid used as an alternative to DBP (Dibutyl Phthalate). It is used in nitrocellulose and alkyd resin paints. | |
| Diisodecylphthalate | Penpet Petrochemical Trading GmbH | Diisodecylphthalate, in the form of a colourless and nearly odourless fluid, is an organic compound that can be used in glues, paints, solvents and sealants. This product is normally used as a plasticizer for PVC. | |
| Diisononyl Phthalate (DINP) | Penpet Petrochemical Trading GmbH | Diisononyl Phthalate (DINP), in the form of a colourless and a nearly odourless fluid, is a phthalate and an organic chemical compound that can be used in glues, paints, solvents, and sealants. This product is mostly used as a plasticizer for PVC. | |
| Diisononyl Phthalate (DINP) | Regar Chemicals Co., Ltd. | Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging ...展开 Diisononyl Phthalate (DINP) is a transparent, colorless oily liquid. It can be used as a tensile strength and flexibility enhancing agent for nitrocellulose paints. It has a low volatility, low separability, low migration properties along with high aging resistance. 收起 | |
| Dioctyl Phthalate(DOP) | Regar Chemicals Co., Ltd. | Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good ...展开 Dioctyl Phthalate(DOP) is a transparent, colorless oily liquid used to increase the flexibility and tensile strength of nitrocellulose paints. It provides good solubility for many components used in paint and has low volatility, low separability and good conductance properties. 收起 | |
| Dioctylphthalate (DOTP) | Penpet Petrochemical Trading GmbH | Dioctylphthalate (DOTP), in the form of a colorless, odourless fluid, is a phthalate and an organic chemical compound. This product can be used in solvents and varnish. It is normally used as a plasticizer. | |
| Epoxidized Soybean Oil (ESBO) | Penpet Petrochemical Trading GmbH | Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with p...展开 Epoxidized Soybean Oil (ESBO), in the form of a light yellow, thick, oily liquid, is a plasticizer than can be used in oil paints, adhesives, and printing inks. This product is derived from soybean oil through the reaction of unsaturated compounds with peracids. Its boiling point is 150°C with an ignition point at 310°C. 收起 | |
| Ethylene Dichloride – Technical Grade (Geismar) | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between...展开 Ethylene Dichloride – Technical Grade (Geismar) is a versatile product which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has a specific gravity of between 1.249 and 1.252 and a distillation range of between 82.5 and 84.5 degrees Celsius. Ethylene Dichloride – Technical Grade (Geismar) is used solvents, fumigant, degreasers, paint removers, and other organic compounds. 收起 | |
| Ethylene Dichloride - Finished Grade | Occidental Chemical Corp. (OxyChem) | Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished...展开 Ethylene Dichloride - Finished Grade is a colorless, clear liquid which is produced by reacting chlorine or anhydrous hydrochloric acid with ethylene. This product has an acidity of 4 and a purity weight percentage of 99.94. Ethylene Dichloride - Finished Grade is used in solvents, fumigant, degreaser, paint remover, and other organic compounds. 收起 | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Fumaric Acid | Penpet Petrochemical Trading GmbH | Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated pol...展开 Fumaric Acid, in the form of a colourless fluid, is produced by the isomerization of maleic acid. This product can be used in paper sizing and in glues. It is sometimes known as 2-Butendioic acid and can also be used in synthetic resins, unsaturated polyester resins, and in lubricants. 收起 | |
| Fumaric Acid Technical Grade | Regar Chemicals Co., Ltd. | Fumaric Acid Technical Grade is a cream-white crystalline powder with a melting point of 285 °C / 545 °F. It is mainly used in production of unsaturated polyester resins, coatings, L-Aspartic Acid, Malic Acid and many auxiliaries. | |
| Isobutanol | Penpet Petrochemical Trading GmbH | Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation...展开 Isobutanol, in the form of a colourless, oily liquid, is an industrial solvent that can be used in paints and coatings. When used in paint, it contributes to reduced viscosity and improves the brush flow of the end product. It also retards the formation of oil residue. Isobutanol can also be used as a solvent in paint and varnish removers. 收起 | |
| Isophorone | Penpet Petrochemical Trading GmbH | Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-d...展开 Isophorone, in the form of a clear fluid having a peppermint odour, is an industrial solvent in the coatings, inks, and adhesive industries. This product can be used in synthesis for the production of isophorone diamine, isophorone diisocyanate and 3,5-dimethylphenol. 收起 | |
| Isophthalic Acid | Penpet Petrochemical Trading GmbH | Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166....展开 Isophthalic acid, in the form of a colourless crystalline powder, is an organic compound that can be used in paints and coatings. This product is insoluble in cold water and is barely soluble in boiling water. This product has a molecular weight of 166.14 and its melting point starts between 345 and 348°C. 收起 | |
| Isopropanol | Penpet Petrochemical Trading GmbH | Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant sol...展开 Isopropanol, in the form of a colourless, clear liquid, is a highly concentrated alcohol that can be used as a solvent for adhesives, paints, and inks. This product is often used as a substitute for ethanol. It is often a constituent of disinfectant solutions because it can quickly and easily clean surfaces, and evaporates without leaving a residue. 收起 | |
| Liquid Chlorine | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine is chlorine gas which has been dried, chilled, pressurized, and converted into liquid. This product has a purity of 99.5 percent and a total chloromethanes weight of 175 ppm. Liquid Chlorine is used in various manufacturing applications. | |
| Liquid Chlorine (Pesticide) | Occidental Chemical Corp. (OxyChem) | Liquid Chlorine (Pesticide) is a green to yellow gas which has been turned into an amber liquid. This product has a purity of 99.5 percent and a chloroform weight of 75 ppm. Liquid Chlorine (Pesticide) is used in various manufacturing applications. | |
| Liquid Sodium Silicate Grade 20 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used...展开 Liquid Sodium Silicate Grade 20 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 20 Clear is used in adhesives, paint, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 30 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicat...展开 Liquid Sodium Silicate Grade 30 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.408 and 1.413 and a total solids weight percentage of between 37.1 and 38.1. Liquid Sodium Silicate Grade 30 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40...展开 Liquid Sodium Silicate Grade 40 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a Silica weight percentage of between 28.74 and 29.74. Liquid Sodium Silicate Grade 40 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is use...展开 Liquid Sodium Silicate Grade 40 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.394 and 1.408 and a viscosity of between 165 and 245. Liquid Sodium Silicate Grade 40 Clear is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 40 Light | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used...展开 Liquid Sodium Silicate Grade 40 Light is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.39 and 1.397 and a viscosity of between 150 and 200. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesi...展开 Liquid Sodium Silicate Grade 42 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 3.17 and 3.27 and a viscosity of between 330 and 470. Liquid Sodium Silicate Grade 42 is used in paint, adhesives, coatings, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 42 Heavy | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is use...展开 Liquid Sodium Silicate Grade 42 Heavy is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.410 and 1.424 and a viscosity of between 550 and 990. Liquid Sodium Silicate Grade 40 Light is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 47 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium ...展开 Liquid Sodium Silicate Grade 47 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a silica weight percentage of between 31.36 and 32.36 and a sodium monoxide weight percentage of between 10.92 and 11.52. Liquid Sodium Silicate Grade 47 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 49FG | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, co...展开 Liquid Sodium Silicate Grade 49FG is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.53 and 2.63 and a viscosity of between 550 and 715. Liquid Sodium Silicate Grade 49FG is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is u...展开 Liquid Sodium Silicate Grade 50 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a total solids weight percentage of between 43.27 and 44.87 and a viscosity of between 295 and 375. Liquid Sodium Silicate Grade 50 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 50 Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, c...展开 Liquid Sodium Silicate Grade 50 Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 15 NTU and a specific gravity of between 1.518 and 1.534. Liquid Sodium Silicate Grade 50 Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade 52 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint...展开 Liquid Sodium Silicate Grade 52 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a viscosity of between 1375 and 2200 and a specific gravity of between 1.551 and 1.568. Liquid Sodium Silicate Grade 52 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW Clear | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhe...展开 Liquid Sodium Silicate Grade JW Clear is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a turbidity of 10 NTU and a viscosity of between 53 and 73. Liquid Sodium Silicate Grade JW Clear is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade JW-25 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade...展开 Liquid Sodium Silicate Grade JW-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a weight ratio of between 2.49 and 2.59 and a total solids weight percentage of between 36.55 and 38.15. Liquid Sodium Silicate Grade JW-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Liquid Sodium Silicate Grade WD-43 | Occidental Chemical Corp. (OxyChem) | Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used ...展开 Liquid Sodium Silicate Grade WD-43 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a specific gravity of between 1.426 and 1.44 and a weight ratio of between 1.75 and 1.85. Liquid Sodium Silicate Grade WD-43 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Maleic anhydride | Regar Chemicals Co., Ltd. | Maleic anhydride is a white flake or briquette. It is the base material in unsaturated polyester resins, and used in the manufacture of a wide variety of consumer products, including paper surface coating, additives of oil products and modified alkyd resi...展开 Maleic anhydride is a white flake or briquette. It is the base material in unsaturated polyester resins, and used in the manufacture of a wide variety of consumer products, including paper surface coating, additives of oil products and modified alkyd resins. 收起 | |
| Maleic Anhydride, Briquets | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boil...展开 Maleic Anhydride, Briquets, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Flakes | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boilin...展开 Maleic Anhydride, Flakes, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Liquid | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point i...展开 Maleic Anhydride, Liquid, in the form of a colourless liquid with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Maleic Anhydride, Pastilles | Penpet Petrochemical Trading GmbH | Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boi...展开 Maleic Anhydride, Pastilles, in the form of a colourless to white powder with an acrid odour, is a versatile intermediate that can be used in alkyd resins for paints and coatings. This product is soluble in water and has a melting point at 53°C. Its boiling point is 202°C and auto-ignites at 477°C. This product is available in flakes, briquets, pastilles or in liquid form. 收起 | |
| Methyl Chloride | Occidental Chemical Corp. (OxyChem) | Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: ...展开 Methyl Chloride is a versatile product which may be used in a variety of applications. This product has an acidity of 10 ppm and a methyl chloride weight percentage of 99.95. Methyl Chloride has a variety of uses, most notably specialty chemical such as: cosmetics, suto polishes, furniture polishes, and paper coatings. 收起 | |
| Methylene Chloride - Aerosol Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in...展开 Methylene Chloride - Aerosol Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and an acidity of 5 ppm. Methylene Chloride - Aerosol Grade acts as a solvent in adhesive and paint formulations. 收起 | |
| Methylene Chloride - Decaffeination Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methyl...展开 Methylene Chloride - Decaffeination Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a distillation range of between 39.5 and 40.3 degrees Celsius and a specific gravity of between 1.318 and 1.321. Methylene Chloride - Decaffeination Grade is used as a solvent for pharmaceutical coatings. 收起 | |
| Methylene Chloride - Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a de...展开 Methylene Chloride - Degreasing Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.311 and 1.315 and a acidity of 5 ppm. Methylene Chloride - Degreasing Grade is used as a degreasing agent for various temperature sensitive parts. 收起 | |
| Methylene Chloride - Special Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chlori...展开 Methylene Chloride - Special Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.3 and 1.32 and a distillation range of between 39.5 and 41.3 degrees Celsius. Methylene Chloride - Special Grade is used as an auxiliary-blowing agent in the production of slab-stock flexible polyurethane foams. 收起 | |
| Methylene Chloride - Technical Grade | Occidental Chemical Corp. (OxyChem) | Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene C...展开 Methylene Chloride - Technical Grade is a colorless, clear liquid which has a mildly sweet, chloroform-like odor. This product has a specific gravity of between 1.318 and 1.321 and a distillation range of between 39.5 and 40.3 degrees Celsius. Methylene Chloride - Technical Grade is used as an a solvent in paint removers and paint mask cleaners. 收起 | |
| Methylhexahydrophthalic Anhydride | Penpet Petrochemical Trading GmbH | Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also k...展开 Methylhexahydrophthalic Anhydride, in the form of a colorless liquid, is an aromatic compound that can be used as a raw material for adhesive resins. This product is produced by hydrogenation from Methyltetrahydrophthalic Anhydride (MTHPA). It is also known as hexahydromethylphthalic anhydride. 收起 | |
| n-Butanol | Penpet Petrochemical Trading GmbH | N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbo...展开 N-Butanol, in the form of a colourless liquid with a characteristic odour reminiscent of banana, is a butyl alcohol that can be used in floor polishes and cleaners, and as a solvent in paints, varnishes, resins, and coatings. This product is a four-carbon linear hydrocarbon with a hydroxy group at position 1. It is miscible in common solvents but is only slightly soluble in water. 收起 | |
| Neopentyl Glycol (NPG), Flakes | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Flakes, in the form of a clear flake, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Neopentyl Glycol (NPG), Solution | Penpet Petrochemical Trading GmbH | Neopentyl Glycol (NPG), Solution, in the form of a 90% solution, is a polyalcohol that can be used in resins for powder coatings and glues. This product is normally used in the production of polyester resins. | |
| Pentaerythritol | Penpet Petrochemical Trading GmbH | Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a densi...展开 Pentaerythritol, in the form of a white, crystalline, and odourless powder, is a component of resin esters that can be used in paints, coatings, printing inks, varnishes, floor coverings, and adhesives. This product has a molar mass of 136.15 and a density of 1.396 g/cm3. Its melting point is defined at 260.5°C and its boiling point is at 276°C. 收起 | |
| Perchloroethylene - Fluorocarbon (PTAP) Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120....展开 Perchloroethylene - Fluorocarbon (PTAP) Grade is a versatile product which is used in a basic raw material in the manufacturing of chlorofluorocarbons. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Fluorocarbon (PTAP) Grade is primarily used in metal and dry cleaning. 收起 | |
| Perchloroethylene - Industrial Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between ...展开 Perchloroethylene - Industrial Grade is a slightly more stabilized version of Percholorethylene -Technical Grade which has a nonvolatile residue of 10 ppm. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Industrial Grade is used in a variety of applications which require cold-cleaning operations. 收起 | |
| Perchloroethylene - Isomerization Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomer...展开 Perchloroethylene - Isomerization Grade is a chloriding agent which acts as a catalyst promoter and reformer. This product has a specific gravity of between 1.617 and 1.621 and an acidity of 5 ppm. Perchloroethylene - Isomerization Grade is used in isomerization and regeneration applications. 收起 | |
| Perchloroethylene - Technical Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Tech...展开 Perchloroethylene - Technical Grade is a versatile product which serves as a carrier for solvents. This product has a specific gravity of between 1.617 and 1.621 and a distillation range of between 120.6 and 121.6 degrees Celsius. Perchloroethylene - Technical Grade is used in fabric finishes, rubber, silicons, adhesives, and paint removers. 收起 | |
| Perchloroethylene - Vapor Degreasing Grade | Occidental Chemical Corp. (OxyChem) | Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Per...展开 Perchloroethylene - Vapor Degreasing Grade is a versatile product which is used in applications with high boiling points. This product has a specific gravity of between 1.611 and 1.615 and a distillation range of between 120.8 and 123 degrees Celsius. Perchloroethylene - Vapor Degreasing Grade is used in the removal of high melting point pitches and waxes. 收起 | |
| Phthalic Anhydride (PA) | Penpet Petrochemical Trading GmbH | Phthalic Anhydride (PA) in the form of a colourless flake, is an organic compound that can be used in surface coatings. This product is an important raw material that can often serve as a plasticizer in plastics, dyestuffs, and synthetic resins. | |
| Phthalic Anhydride (PA) | Regar Chemicals Co., Ltd. | Phthalic Anhydride (PA) is an organic, white flake or crystal powder. This raw material may be used to produce PVC plasticizer, polyester resin, alkyd resin, dye, paint and medicine. | |
| Sodium Formate | Penpet Petrochemical Trading GmbH | Sodium Formate is the sodium salt of formic acid. This product appears as a colourless powder that can be used in printing processes. Its melting point is -94.7 degrees Celsius and it boils between 55.8 and 56.6 degrees C. | |
| Sodium Hypochlorite | Occidental Chemical Corp. (OxyChem) | Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textil...展开 Sodium Hypochlorite is a colorless to yellow, clear liquid which has a characteristic, bleach odor. This product has and available chlorine level of 144 gpl and a NaOCL weight percentage of 12.5. Sodium Hypochlorite is used in bleaching paper pulp, textiles, water purification, medicine, fungicides, swimming pool disinfectants, and germicides. 收起 | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...展开 Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...展开 Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 收起 | |
| Tetrahydrofurane (THF) | Penpet Petrochemical Trading GmbH | Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and p...展开 Tetrahydrofurane (THF), in the form of a colourless fluid with an ether-like odor, is an organic solvent that can be used in the production of enamels and adhesives. This product is normally an intermediate in the production of polyamide, polyester and polyurethane. 收起 | |
| Tetrahydrophthalic Anhydride (THPA) | Penpet Petrochemical Trading GmbH | Tetrahydrophthalic Anhydride (THPA), in the form of a white crystalline powder, is created from the reaction of butadiene with maleic anhydride. This product can be used in adhesives and as an intermediate for alkyd resins. |
