| Acetone | TOP Solvent Company Limited | Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起 | |
| Anhydrite | Provencale S.A. | Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution....展开 Anhydrite is a filler that can withstand humidity. It is finely ground and dressed natural anhydrite that is a waterless sulphate. It is often formed as an evaporation product from sea water subject to progressive concentration of the salt water solution. Anhydrite makes up the sturdy solid base of gypsum deposits and can be mined separately. It is for use in industrial paints, lacquers and adhesives. 收起 | |
| Butyl Glycol Ether (BGE) | TOP Solvent Company Limited | Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| CALGAR® 0.35-0.7 | Provencale S.A. | CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity ...展开 CALGAR® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 500 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 0.5-1.5 | Provencale S.A. | CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is...展开 CALGAR® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 130 | Provencale S.A. | CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2....展开 CALGAR® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 1.5-3 | Provencale S.A. | CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2...展开 CALGAR® 1.5-3, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.3. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| CALGAR® 40 | Provencale S.A. | CALGAR® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 12 microns. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. | |
| CALGAR® 80-800 | Provencale S.A. | CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is ...展开 CALGAR® 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's untamped apparent density is 1.4. Its pH in a water solution lies between 8.5 and 9.5, and its specific gravity is 2.7. 收起 | |
| Corindon Synthétique | Provencale S.A. | Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or sila...展开 Corindon Synthétique, in the form of a grey powder, is an industrial raw material. This product is composed of about 99% aluminum oxide. It can be used in abrasion-resistant wood or decorative coatings. Its surface is often treated with silanes or silane-based substances. 收起 | |
| Criscal 0.5-1 | Provencale S.A. | Criscal 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 1 | Provencale S.A. | Criscal 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 1.6 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 10 | Provencale S.A. | Criscal 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 1.5-2.5 | Provencale S.A. | Criscal 1.5-2.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 2 | Provencale S.A. | Criscal 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 2-4 | Provencale S.A. | Criscal 2-4, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 5 | Provencale S.A. | Criscal 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Criscal 80-800 | Provencale S.A. | Criscal 80-800, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. Its untamped apparent density is 1.3. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Ethyl Acetate (EA) | TOP Solvent Company Limited | Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Feldspar | Provencale S.A. | Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plast...展开 Feldspar, in the form of a crystalline solid, is a chemically resistant silicate with a thick-slated grain morphology. This product can be used in clear lacquer systems, UV-hardening lacquers, dispersion paints, silicate paints and plasters, and in plastic films. It is mostly a potash feldspar that has been processed and separated by a screening technique that includes classification and micro-grinding. 收起 | |
| GF-S1000 Aromatic Solvent | Changshu Alliance Chemical Co., Ltd. | GF-S1000 Aromatic Solvent can be used in oil paints and resin solvent, advanced paint solvent and printing oil, and as an extractant for hydrogen peroxide production. | |
| GF-S1500 Aromatic Solvent | Changshu Alliance Chemical Co., Ltd. | GF-S1500 Aromatic Solvent can be used as advanced paint solvent and insecticide emulsifier. | |
| GF-S1800 Aromatic Solvent | Changshu Alliance Chemical Co., Ltd. | GF-S1800 Aromatic Solvent can be used as advanced paint solvent, insecticide, emulsifier, plasticizer, rubber and resin solvent. | |
| GF-S2000A Aromatic Solvent | Changshu Alliance Chemical Co., Ltd. | GF-S2000A Aromatic Solvent can be used as an advanced paint solvent, insecticide, emulsifier, plasticizer, rubber and resin solvent. | |
| GF-S2000B Aromatic Solvent | Changshu Alliance Chemical Co., Ltd. | GF-S2000B Aromatic Solvent can be used in compounding aromatic hydrocarbon conduction oil, plasticizer, etc. | |
| GF-S800 Aromatic Solvent | Changshu Alliance Chemical Co., Ltd. | GF-S800 Aromatic Solvent can be used as oil paint and resin solvent, advanced paint solvent and printing oil, and extractant for hydrogen peroxide production. | |
| Isopropanol (IPA) | TOP Solvent Company Limited | Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起 | |
| Kaolin | Provencale S.A. | Kaolin, in the form of a hexagonal, flexible, thin lamina, is a naturally occurring raw material that can be used in dispersion paints or dispersion adhesives. Its density is 2.6 g/cm3 and it has a high aspect ratio of 1:40. | |
| Methanol | TOP Solvent Company Limited | Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起 | |
| Methyl Ethyl Ketone (MEK) | TOP Solvent Company Limited | Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methyl Isobutyl Ketone (MIBK) | TOP Solvent Company Limited | Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methylene Chloride | TOP Solvent Company Limited | Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起 | |
| Mikhart® 0.35-0.7 | Provencale S.A. | Mikhart® 0.35-0.7, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between .25 and .9 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1 | Provencale S.A. | Mikhart® 0.5-1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.7-1.2 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 0.5-1.5 | Provencale S.A. | Mikhart® 0.5-1.5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0.63-1.8 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 1 | Provencale S.A. | Mikhart® 1, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 1.7 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 1-2 | Provencale S.A. | Mikhart® 1-2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 1.4-2.5 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 10 | Provencale S.A. | Mikhart® 10, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 10 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 110 | Provencale S.A. | Mikhart® 110, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's particle size range is between 0-1 mm. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 130 | Provencale S.A. | Mikhart® 130, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 140 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 15 | Provencale S.A. | Mikhart® 15, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 17 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 2 | Provencale S.A. | Mikhart® 2, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 40 | Provencale S.A. | Mikhart® 40, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 30 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 5 | Provencale S.A. | Mikhart® 5, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® 65 | Provencale S.A. | Mikhart® 65, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 60 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® M | Provencale S.A. | Mikhart® M, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 3.5 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® MU08 | Provencale S.A. | Mikhart® MU08, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is .9 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® MU12 | Provencale S.A. | Mikhart® MU12, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 1.2 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| Mikhart® SPL | Provencale S.A. | Mikhart® SPL, in the form of a white powder, is a calcium carbonate that can be used as a filler in paints and coatings. This product's mean particle size is 20 microns. Its specific gravity is 2.7 and its refractive index is 1.59. | |
| N-Butyl Acetate (BA) | TOP Solvent Company Limited | N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| Pyromellitic Acid (PMA) | Changshu Alliance Chemical Co., Ltd. | Pyromellitic Acid (PMA) is the main material for PMDA and can be used as an auxiliary in powder coatings. | |
| Pyromellitic Dianhydride (PMDA) | Changshu Alliance Chemical Co., Ltd. | Pyromellitic Dianhydride (PMDA) is a material for polyamides, polyimide films and resins, high temperature-resistant electrical insulating enamels and high temperature-resistant coatings. It is also utilized as the curing agent of epoxy resins, a stabiliz...展开 Pyromellitic Dianhydride (PMDA) is a material for polyamides, polyimide films and resins, high temperature-resistant electrical insulating enamels and high temperature-resistant coatings. It is also utilized as the curing agent of epoxy resins, a stabilizer of bakelite and an auxiliary agent of powder coatings. 收起 | |
| S-Butyl Acetate (SBA) | TOP Solvent Company Limited | S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起 | |
| Talkron® CLASSIC | Provencale S.A. | Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is re...展开 Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is required, and its properties allow the user to regulate and adjust the gloss levels when required. 收起 | |
| Talkron® NATUR | Provencale S.A. | Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interi...展开 Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interior or exterior coatings. 收起 | |
| Talkron® PURE | Provencale S.A. | Talkron® PURE, in the form of a white powder, is a high-purity talc with good whiteness. This product can be used in hydrophobic indoor and outdoor coatings. It confers dry-hiding properties and can act as a partial replacement for titanium dioxide. | |
| Talkron® STYL | Provencale S.A. | Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust...展开 Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust the gloss and whiteness of the end product. 收起 | |
| Talkron® ZERO | Provencale S.A. | Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has a...展开 Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has anti-corrosive, hydrophobic, and weather-resistant characteristics. 收起 | |
| Toluene | TOP Solvent Company Limited | Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. I...展开 Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. In some areas this solvent is hard to come by. The primary use of this product is in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol 60/145 | TOP Solvent Company Limited | TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene...展开 TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene making it a highly flammable liquid. TOPSol 60/145 is primarily used as a solvent in adhesives and sealants. 收起 | |
| TOPSol A100 | TOP Solvent Company Limited | TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primaril...展开 TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol A150 | TOP Solvent Company Limited | TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash ...展开 TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol A150ND | TOP Solvent Company Limited | TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content...展开 TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol BF | TOP Solvent Company Limited | TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics....展开 TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics. TOPSol BF is primarily used as a solvent in adhesives and sealants. 收起 | |
| TOPSol PM | TOP Solvent Company Limited | TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used...展开 TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol PMA | TOP Solvent Company Limited | TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethy...展开 TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethylene glycol-based and glycol ether acetates. TOPSol PMA is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| TOPSol X2000 | TOP Solvent Company Limited | TOPSol X2000 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is broadly used in the rubber and related industry. TOPSol X2000 is primarily used as a solvent in adhesives and sealants. | |
| Wollastonite | Provencale S.A. | Wollastonite, in the form of a white powder, is a calcium silicate. This product is formed from calcium carbonate and silicon dioxide and can be used in powder coatings and anti-corrosive coatings for plastics. Specific processing technologies allow the...展开 Wollastonite, in the form of a white powder, is a calcium silicate. This product is formed from calcium carbonate and silicon dioxide and can be used in powder coatings and anti-corrosive coatings for plastics. Specific processing technologies allow the particle structures to vary from nearly block-like with a low aspect ratio to acicular structures with a high aspect ratio. 收起 | |
| WS 200 | TOP Solvent Company Limited | WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and...展开 WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and aromatics.The primary use of this product is in printing inks, paints and coatings. 收起 | |
| Xylene | TOP Solvent Company Limited | Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is ...展开 Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is highly flammable and has a similar odor to gasoline. Xylene is primarily used in printing inks, adhesives, paints and coatings. 收起 | |
| YGA100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGB100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. | |
| YGB100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. |
