| Acetone | TOP Solvent Company Limited | Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起 | |
| Butyl Glycol Ether (BGE) | TOP Solvent Company Limited | Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| D.M.P. 30 | Synpol Products PVT. Ltd | D.M.P. 30 is a tertiary amine. This product has a viscosity of 2-5 cPs and a density of 0.9-1.0 g/cm3. D.M.P. 30 is most commonly used as a hardener in lamination and adhesive applications. | |
| Epoxy Phenol B.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol B.G.E. is a reactive diluent. This product has a density of 0.92-0.94 g/cm3. Epoxy Phenol B.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol CNSL | Synpol Products PVT. Ltd | Epoxy Phenol CNSL is a reactive diluent. This product has a density of 0.96-0.97 g/cm3. Epoxy Phenol CNSL is most commonly used in casting, encapsulation, and bonding applications. | |
| Epoxy Phenol P.G.E. | Synpol Products PVT. Ltd | Epoxy Phenol P.G.E. is a reactive diluent. This product has a density of 1.11-1.22 g/cm3. Epoxy Phenol P.G.E. is most commonly used in casting, encapsulation, and bonding applications. | |
| Ethyl Acetate (EA) | TOP Solvent Company Limited | Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Hardeners 111 | Synpol Products PVT. Ltd | Hardeners 111 is an aliphatic polyamine. This product has a viscosity of 15-25 cPs and a density of 0.98-0.99 g/cm3. Hardeners 111 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 222 | Synpol Products PVT. Ltd | Hardeners 222 is an aliphatic polyamine. This product has a viscosity of 7-10 cPs and a density of 0.95-0.96 g/cm3. Hardeners 222 is most commonly used in adhesive and coal tar modified surface coating applications. | |
| Hardeners 260 | Synpol Products PVT. Ltd | Hardeners 260 is a modified aliphatic polyamine. This product has a viscosity of 75-80 cPs and a density of 1.0-1.1 g/cm3. Hardeners 260 is most commonly used in solvent-free epoxy coating and lamination applications. | |
| Hardeners 280 | Synpol Products PVT. Ltd | Hardeners 280 is a modified aliphatic polyamine. This product has a viscosity of 20-30 cPs and a density of 1.14-1.16 g/cm3. Hardeners 280 is most commonly used as a hardener in coating applications. | |
| Hardeners 340 | Synpol Products PVT. Ltd | Hardeners 340 is a modified aromatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 340 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 345 | Synpol Products PVT. Ltd | Hardeners 345 is a modified aliphatic polyamine. This product has a viscosity of 6-9 cPs and a density of 1.10-1.12 g/cm3. Hardeners 345 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 350 | Synpol Products PVT. Ltd | Hardeners 350 is a modified aliphatic polyamine. This product has a viscosity of 150-210 cPs and a density of 1.13-1.14 g/cm3. Hardeners 350 is most commonly used as a hardener in concrete and underwater coating applications. | |
| Hardeners 444 | Synpol Products PVT. Ltd | Hardeners 444 is an aliphatic amine epoxy adduct. This product has a viscosity of 2-4 cPs and a density of 0.95-0.96 g/cm3. Hardeners 444 is most commonly used in chemical and solvent-resistant coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is a polyamine epoxy adduct. This product has a viscosity of 30-60 cPs and a density of 1.07-1.09 g/cm3. Hardeners 473 is most commonly used as a hardener in solvent-free epoxy coating applications. | |
| Hardeners 473 | Synpol Products PVT. Ltd | Hardeners 473 is an aliphatic amine adduct. This product has a viscosity of 100-140 cPs and a density of 1.10-1.12 g/cm3. Hardeners 473 is most commonly used in fast-setting adhesive applications. | |
| Hardeners 620 | Synpol Products PVT. Ltd | Hardeners 620 is a cycloaliphatic amine epoxy adduct. This product has a viscosity of 3-5 cPs and a density of 1.02-1.03 g/cm3. Hardeners 620 is most commonly used in flooring adhesive applications. | |
| Hardeners 640 | Synpol Products PVT. Ltd | Hardeners 640 is a phenyl alkamine. This product has a viscosity of 20-40 cPs and a density of 0.98-1.0 g/cm3. Hardeners 640 is most commonly used in solvent-free and high-solids epoxy coating applications. | |
| Isopropanol (IPA) | TOP Solvent Company Limited | Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起 | |
| Methanol | TOP Solvent Company Limited | Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起 | |
| Methyl Ethyl Ketone (MEK) | TOP Solvent Company Limited | Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methyl Isobutyl Ketone (MIBK) | TOP Solvent Company Limited | Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methylene Chloride | TOP Solvent Company Limited | Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起 | |
| N-Butyl Acetate (BA) | TOP Solvent Company Limited | N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| S-Butyl Acetate (SBA) | TOP Solvent Company Limited | S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起 | |
| Synpol 1001 | Synpol Products PVT. Ltd | Synpol 1001 is a butylated UF amino resin. This product has a non-volatile compound content of 63-67% and a density at 25°C of 1.03-1.05 g/cm3. Synpol 1001 is most commonly used in general purpose baking enamel applications. | |
| Synpol 105X | Synpol Products PVT. Ltd | Synpol 105X is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3 and a non-volatile compound content of 58-62%. Synpol 105X is most commonly used as a hardener in solvent-based epoxy coating applications. | |
| Synpol 115 | Synpol Products PVT. Ltd | Synpol 115 is a reactive polyamide resin. This product has a density at 25°C of 0.97-0.98 g/cm3. Synpol 115 is most commonly used as a hardener in protective and decorative coating applications. | |
| Synpol 115 (70% in Xylene) | Synpol Products PVT. Ltd | Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coa...展开 Synpol 115 (70% in Xylene) is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.95 g/cm3 and a non-volatile compound content of 68-72%. Synpol 115 (70% in Xylene) is most commonly used as a hardener in protective and decorative coating applications. 收起 | |
| Synpol 130 | Synpol Products PVT. Ltd | Synpol 130 is a reactive polyamide resin. This product has a density at 25°C of 1.03-1.04 g/cm3 and a non-volatile compound content of 68-72%. Synpol 130 is most commonly used as a hardener in water-emulsifiable epoxy coating applications. | |
| Synpol 140 | Synpol Products PVT. Ltd | Synpol 140 is a reactive polyamide resin. This product has a density at 25°C of 0.96-0.98 g/cm3. Synpol 140 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 150 | Synpol Products PVT. Ltd | Synpol 150 is a reactive polyamide resin. This product has a density at 25°C of 0.975-0.985 g/cm3. Synpol 150 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 | Synpol Products PVT. Ltd | Synpol 160 is a reactive polyamide resin. This product has a density at 25°C of 0.94-0.96 g/cm3. Synpol 160 is most commonly used as a hardener in solvent-free coating, adhesive, and lamination applications. | |
| Synpol 160 LP | Synpol Products PVT. Ltd | Synpol 160 LP is a reactive polyamide resin. This product has a density at 25°C of 0.92-0.94 g/cm3. Synpol 160 LP is most commonly used as a hardener in solvent-free coating applications. | |
| Synpol 1800 | Synpol Products PVT. Ltd | Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 1800 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.17-1.19 g/cm3 and a melting point of 125-135ºC. Synpol 1800 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications. 收起 | |
| Synpol 200 | Synpol Products PVT. Ltd | Synpol 200 is a bisphenol A-based, unmodified epoxy resin. This product has a viscosity at 25°C of 120-160 Poises. Synpol 200 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 2080 | Synpol Products PVT. Ltd | Synpol 2080 is a coconut fatty acid-modified epoxy ester. This product has a density of 0.97-0.98 g/cm3. Synpol 2080 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 210 | Synpol Products PVT. Ltd | Synpol 210 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-210 Poises. Synpol 210 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 220 | Synpol Products PVT. Ltd | Synpol 220 is a bisphenol A-based, unmodified reactive diluent. This product has a viscosity at 25°C of 180-200 Poises. Synpol 220 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 230 | Synpol Products PVT. Ltd | Synpol 230 is a bisphenol A-based, unmodified plasticizer. This product has a viscosity at 25°C of 230-250 Poises. Synpol 230 is most commonly used in coating, lamination, and adhesive applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3. Synpol 280 is most commonly used in high-solids coating, adhesive, and lamination applications. | |
| Synpol 280 | Synpol Products PVT. Ltd | Synpol 280 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.22-1.24 g/cm3. Synpol 280 is most commonly used in heat-resistant laminate, electrical casting, adhesive, and coating applications. | |
| Synpol 4000 | Synpol Products PVT. Ltd | Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating application...展开 Synpol 4000 is a bisphenol A-based, unmodified plasticizer. This product has a density of 1.18-1.19 g/cm3 and a melting point of 145-155ºC. Synpol 4000 is most commonly used in thermosetting bake finish and chemical-resistant container coating applications where increased substrate adhesion is required. 收起 | |
| Synpol 450XX | Synpol Products PVT. Ltd | Synpol 450XX is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.07-1.09 g/cm3. Synpol 450XX is most commonly used in chemical-resistant, air-dry, and bake coating applications. | |
| Synpol 5545 | Synpol Products PVT. Ltd | Synpol 5545 is a linseed fatty acid-modified epoxy ester. This product has a density of 0.92-0.93 g/cm3. Synpol 5545 is most commonly used in air-drying maintenance finish applications. | |
| Synpol 6040 | Synpol Products PVT. Ltd | Synpol 6040 is a soya fatty acid-modified epoxy ester. This product has a density of 0.96-0.97 g/cm3. Synpol 6040 is most commonly used in clear and pigmented electronic and appliance finish applications. | |
| Synpol 900 | Synpol Products PVT. Ltd | Synpol 900 is a bisphenol A-based, unmodified epoxy resin. This product has a density of 1.18-1.19 g/cm3 and a melting point 95-105ºC. Synpol 900 is most commonly used in air-dry and bake finish, as well as powder coating applications. | |
| Synpol AT-67 | Synpol Products PVT. Ltd | Synpol AT-67 is an acrylic copolymer solution. This product has a density of 1.02-1.03 g/cm3 and a total non-volatile content of 56-60%. Synpol AT-67 is most commonly used in high-performance coating applications. | |
| Synpol AT-68 | Synpol Products PVT. Ltd | Synpol AT-68 is an acrylic copolymer solution. This product has a density of 1.01-1.03 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-68 is most commonly used in flexible paint applications. | |
| Synpol AT-70 | Synpol Products PVT. Ltd | Synpol AT-70 is an acrylic copolymer solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol AT-70 is most commonly used in metal finish applications. | |
| Synpol B-10 | Synpol Products PVT. Ltd | Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure pr...展开 Synpol B-10 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 38-42%. Synpol B-10 is most commonly used in screen printing, vinyl coating, plastic coating, gravure printing ink, and PVC coating primer applications. 收起 | |
| Synpol B-30 | Synpol Products PVT. Ltd | Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and h...展开 Synpol B-30 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3. Synpol B-30 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-60 | Synpol Products PVT. Ltd | Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and ...展开 Synpol B-60 is a polyvinyl butyral resin in a clear water white-colored, free flowing, granular form. This product has a density at 25°C of 1.05-1.15 g/cm3 and a softening point of 51-55°C. Synpol B-60 is most commonly used in metal, textile, paper and foil coating, thermosetting and hot-melt adhesive, wood finish, and printing ink applications. 收起 | |
| Synpol B-722 | Synpol Products PVT. Ltd | Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating appli...展开 Synpol B-722 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.99-1.00 g/cm3 and a total non-volatile content of 48-52%. Synpol B-722 is most commonly used in acrylic lacquer, wood lacquer, ink, and PVC coating applications. 收起 | |
| Synpol B-723 | Synpol Products PVT. Ltd | Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium l...展开 Synpol B-723 is a thermoplastic homopolymer acrylic resin solution. This product has a density of 0.95-0.96 g/cm3 and a total non-volatile content of 38-42%. Synpol B-723 is most commonly used in metal, vinyl, and plastic coating, as well as aluminium lacquer applications. 收起 | |
| Synpol BG-40 | Synpol Products PVT. Ltd | Synpol BG-40 is a butylated UF amino resin. This product has a non-volatile compound content of 72-76% and a density at 25°C of 1.01-1.03 g/cm3. Synpol BG-40 is most commonly used in high-gloss stoving enamel applications. | |
| Synpol L-9 | Synpol Products PVT. Ltd | Synpol L-9 is a butylated phenolic formaledyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-9 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol L-97 | Synpol Products PVT. Ltd | Synpol L-97 is a butylated phenolic formaldehyde resin. This product has a density of 0.98-0.99 g/cm3 and a total non-volatile content of 58-62%. Synpol L-97 is most commonly used in etch primer, adhesive, insulating varnish, and wire enamel applications. | |
| Synpol M-70 | Synpol Products PVT. Ltd | Synpol M-70 is a butylated MF amino resin. This product has a non-volatile compound content of 68-72% and a density at 25°C of 1.01-1.03 g/cm3. Synpol M-70 is most commonly used in flexible lacquer applications. | |
| Synpol MF-268 | Synpol Products PVT. Ltd | Synpol MF-268 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-268 is most commonly used in stoving enamel applications. | |
| Synpol MF-310 | Synpol Products PVT. Ltd | Synpol MF-310 is a butylated MF amino resin. This product has a non-volatile compound content of 58-62% and a density at 25°C of 1.01-1.03 g/cm3. Synpol MF-310 is most commonly used in high-gloss enamel applications. | |
| Synpol PR-10/B | Synpol Products PVT. Ltd | Synpol PR-10/B is an alkyl phenol formaldehyde thermosetting resin in a pale yellow solid form. This product is most commonly used in spar varnish, marine finish, wood varnish, rubber-based adhesive, and electrical insulating varnish applications. | |
| Synpol SK-10 | Synpol Products PVT. Ltd | Synpol SK-10 is a ketone formaldehyde resin. This product has a hydroxyl value of 250-320 mgKOH/g. Synpol SK-10 is most commonly used in NC lacquer, printing ink, and surface coating applications. | |
| Synpol US-8 | Synpol Products PVT. Ltd | Synpol US-8 is a butylated UF amino resin. This product has a non-volatile compound content of 58-60% and a density at 25°C of 1.01-1.03 g/cm3. Synpol US-8 is most commonly used in wood lacquer applications. | |
| Toluene | TOP Solvent Company Limited | Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. I...展开 Toluene is a clear fast evaporating, highly refined aromatic solvent on a technical grade. This product meets many specifications such as that of Nitration grade Toluene (ASTM D841). The boiling range of this flexible solvent is not broader than 1.0°C. In some areas this solvent is hard to come by. The primary use of this product is in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol 60/145 | TOP Solvent Company Limited | TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene...展开 TOPSol 60/145 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is widely used in the rubber and related industry. It is solvent with naphtha (petroleum) and light aliphatic and is built up of n-Hexane and Toluene making it a highly flammable liquid. TOPSol 60/145 is primarily used as a solvent in adhesives and sealants. 收起 | |
| TOPSol A100 | TOP Solvent Company Limited | TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primaril...展开 TOPSol A100 Solvent is a clear transparent liquid with an aromatic odor. It has a wide boiling range and is a mixture of predominantly C9 hydrocarbons with 98% aromatic. It has good solvent properties and is low in sulfur content. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol A150 | TOP Solvent Company Limited | TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash ...展开 TOPSol A150 Solvent is a clear transparent liquid with an aromatic odor. It has a high boiling point and is a mixture of predominantly C9-11 hydrocarbons with >98% aromatic. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol A150ND | TOP Solvent Company Limited | TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content...展开 TOPSol A150ND Solvent is a clear transparent liquid with an aromatic odor. This product is a mixture of predominantly C9-10 with aromatic hydrocarbons and it has less that 1% naphthalene content. It has good solvent properties and is low in sulfur content and has a high flash point. This product is primarily used as a solvent in paints and coatings. 收起 | |
| TOPSol BF | TOP Solvent Company Limited | TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics....展开 TOPSol BF is a transparent liquid that is a quick evaporating hydrocarbon solvent. This product is a solvent that has undergone a great degree of general refining that result in a low level of impurities such as sulfur, olefins, benzene and all aromatics. TOPSol BF is primarily used as a solvent in adhesives and sealants. 收起 | |
| TOPSol PM | TOP Solvent Company Limited | TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used...展开 TOPSol PM also sometimes known as Propylene glycol methyl ether (PGME), is a colorless, hygroscopic solvent with a similar properties to ethylene oxide-based glycol ethers such as the volatility, viscosity and solvent strength. TOPSol PM is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| TOPSol PMA | TOP Solvent Company Limited | TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethy...展开 TOPSol PMA is also known as Propylene glycol methyl ether acetate (PGMEA). This product is a colorless, neutral propylene oxide-based glycol ether acetate and has a slight odor and a volatility. It has a viscosity and solvent power that is similar to ethylene glycol-based and glycol ether acetates. TOPSol PMA is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| TOPSol X2000 | TOP Solvent Company Limited | TOPSol X2000 is a transparent liquid with a wide boiling range and is a rapidly evaporating solvent that is broadly used in the rubber and related industry. TOPSol X2000 is primarily used as a solvent in adhesives and sealants. | |
| WS 200 | TOP Solvent Company Limited | WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and...展开 WS 200 is a clear colored mineral liquid that is derived from petroleum. The White spirit range consists of products that are water-white and typically boil between 150 and 200°C. WS 200 is a combination of natural gases like paraffins, cycloparaffins and aromatics.The primary use of this product is in printing inks, paints and coatings. 收起 | |
| Xylene | TOP Solvent Company Limited | Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is ...展开 Xylene is a clear is a quick evaporating hydrocarbon solvent that has a flash point >21°C. It consists essentially of the three different isomers which are ortho, meta and para xylene. This product also contains the organic compound ethylbenzene which is highly flammable and has a similar odor to gasoline. Xylene is primarily used in printing inks, adhesives, paints and coatings. 收起 | |
| YGA100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGA110-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGA110-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in coatings, adhesives, hot melt road marking paints, inks, and paint additives. | |
| YGB100-1 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-1 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. | |
| YGB100-2 | Nanjing Yuangang Fine Chemical Co., Ltd. | YGB100-2 is a hydrogenated petroleum resin, in white granular form. This product can be used in hot melt road marking paints to increase toughness, hardness, and adhesion. |
