| Acetone | TOP Solvent Company Limited | Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent p...展开 Acetone, also known as 2-propanone or dimethyl ketone (DMK), is a colorless, low boiling, easy pouring liquid with a distinguishing odor. It is miscible in all proportions with water, alcohols, many hydrocarbons and other organic liquids. It has solvent properties for vegetable and animal fats, cellulose, natural and synthetic resins and many other organic substances. The primary use for this product is in printing inks, adhesives, paints and coatings. 收起 | |
| ANCAMINE® 2719 | Evonik Operations GmbH, BL Coating & Adhesive Resins | ANCAMINE® 2719 curing agent is a nonyl- and p-tert-butyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin. It is of low viscosity and highly reactive at low temperatures ~5°C. Ancamine 2719 will react with...展开 ANCAMINE® 2719 curing agent is a nonyl- and p-tert-butyl phenol free aliphatic polyamine Mannich base curing agent designed for use with liquid epoxy resin. It is of low viscosity and highly reactive at low temperatures ~5°C. Ancamine 2719 will react with liquid epoxy resins at low temperature to produce a highly chemical resistant surface coating. 收起 | Request Sample |
| Butyl Glycol Ether (BGE) | TOP Solvent Company Limited | Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenate...展开 Butyl Glycol Ether (BGE) is a colorless, slight smelling liquid with a high boiling point. This product has small hygroscopic properties and is miscible with water at room temperature. This liquid solution is also miscible with several different oxygenated solvents, as well as with aliphatic and aromatic hydrocarbons and oils. It is solvent for many natural and synthetic resins, nitrocellulose and ethyl cellulose. Butyl Glycol Either (BGE) is primarily used as a solvent in printing inks, paints and coatings. 收起 | |
| Chlorinated Polypropylene (CPP) | Anhui Elite Industrial Co., Ltd | Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone...展开 Chlorinated Polypropylene (CPP) is a non-toxic, tasteless, fast dissolving white to yellow granular powder. This product provides adhesion to coatings, adhesives, and inks. Chlorinated Polypropylene (CPP) is also used for its weather, chemical, oil, ozone, fire, and thermal aging resisting properties. This product is mainly used as an adhesive agent for printing ink and plastic ink. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobuty...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 is a colorless, odorless, non-toxic, and thermoplastic powder. This product has a 44% chlorine content and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP25 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl I...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP35 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 and provides anti-corrosive properties as well. Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP15 provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 | Anhui Elite Industrial Co., Ltd | Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, an...展开 Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether CMP60 is a colorless, odorless, non-toxic, thermoplastic powder. This product has a density between 0.38 and 0.48 g/cm3 and provides anti-corrosive properties as well. This product provides clinging, anti-water, and weather protection to paint and inks. 收起 | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...展开 DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4220 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...展开 DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4221 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...展开 DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. 收起 | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...展开 DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. 收起 | Request Sample |
| DEGACRYL® HS 4250 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...展开 DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. 收起 | Request Sample |
| DEGACRYL® HS 4251 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...展开 DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. 收起 | Request Sample |
| DEGACRYL® HS 4294 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...展开 DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. 收起 | Request Sample |
| DEGACRYL® HS 4322 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...展开 DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). 收起 | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...展开 DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. 收起 | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...展开 DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| DEGACRYL® HS 666 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...展开 DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. 收起 | Request Sample |
| Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...展开 Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. 收起 | |
| Ethyl Acetate (EA) | TOP Solvent Company Limited | Ethyl acetate (EA) is a neutral colorless liquid with a pleasantly fruity odor. Ethyl acetate is primarily used in the production of nitrocellulose and cellulose acetate lacquers and as a solvent in adhesives and coatings. | |
| ExBar™ 200 | Excalibar Minerals LLC | ExBar™ 200 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 15.0u and an oil absorption of 9. | |
| ExBar™ 325 | Excalibar Minerals LLC | ExBar™ 325 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 10.0u and an oil absorption of 10. | |
| ExBar™ 400 | Excalibar Minerals LLC | ExBar™ 400 is a raw mineral material that is manufactured from natural barium sulfate ore. This product is used in many different applications such as paints, adhesives and sealants. It has a median particle size of 8.0u and an oil absorption of 12. | |
| ExBar™ W 1 | Excalibar Minerals LLC | ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 1 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 1u and an oil absorption of 15. 收起 | |
| ExBar™ W 2 | Excalibar Minerals LLC | ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 2 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 2u and an oil absorption of 13. 收起 | |
| ExBar™ W 3 | Excalibar Minerals LLC | ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 3 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 3u and an oil absorption of 13. 收起 | |
| ExBar™ W 325 | Excalibar Minerals LLC | ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 325 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. 收起 | |
| ExBar™ W 4 | Excalibar Minerals LLC | ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are prin...展开 ExBar™ W 4 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 4u and an oil absorption of 12. 收起 | |
| ExBar™ W 400 | Excalibar Minerals LLC | ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are pr...展开 ExBar™ W 400 is manufactured using the highest quality white, natural barium sulfate ore. This product is often used in marine coatings, paints, powder coatings, adhesives, sealants, and many other applications where color, purity and particle size are principle concerns. It has a median particle size of 8u and an oil absorption of 10. 收起 | |
| ExCal® 100 | Excalibar Minerals LLC | ExCal® 100 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 200 | Excalibar Minerals LLC | ExCal® 200 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 325 | Excalibar Minerals LLC | ExCal® 325 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® 400 | Excalibar Minerals LLC | ExCal® 400 is a calcium carbonate product that is processed from a high-purity stone. This product is primarily used in adhesives, sealants, and other applications. | |
| ExCal® CW 100 | Excalibar Minerals LLC | ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 100 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 200 | Excalibar Minerals LLC | ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 200 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| ExCal® CW 325 | Excalibar Minerals LLC | ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand ar...展开 ExCal® CW 325 is a calcium carbonate product that is processed from a high-purity ore. This product can be used for several different applications such as coatings, adhesives, sealants and many other specialty applications where color and binder demand are a standard. 收起 | |
| Exilva® F 01-L | Borregaard ChemCell | Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...展开 Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. 收起 | |
| Exilva® F 01-V | Borregaard ChemCell | Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...展开 Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. 收起 | |
| Exilva® P 01-L | Borregaard ChemCell | Exilva® P 01-L is a microfibrillated cellulose. | |
| Exilva® P 01-V | Borregaard ChemCell | Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...展开 Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. 收起 | |
| Glass Beads / Glass Microspheres | Anhui Elite Industrial Co., Ltd | Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traf...展开 Glass Beads / Glass Microspheres are clean, apparent beads with no obvious impurities. This product has a reflection index between 1.5 and 1.61 and is composed of sodium lime glass. Glass Beads / Glass Microspheres are used to improve visibility for traffic marking paint. 收起 | |
| Hollow Glass Microspheres T20 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adj...展开 Hollow Glass Microspheres T20 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.20 g/cm3. Hollow Glass Microspheres T20 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T25 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adj...展开 Hollow Glass Microspheres T25 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.25 g/cm3. Hollow Glass Microspheres T25 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T32 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adj...展开 Hollow Glass Microspheres T32 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.32 g/cm3. Hollow Glass Microspheres T32 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T40 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adj...展开 Hollow Glass Microspheres T40 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.40 g/cm3. Hollow Glass Microspheres T40 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T46 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adj...展开 Hollow Glass Microspheres T46 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.46 g/cm3. Hollow Glass Microspheres T46 improves flow properties and adjusts the density of paint. 收起 | |
| Hollow Glass Microspheres T60 | Anhui Elite Industrial Co., Ltd | Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adj...展开 Hollow Glass Microspheres T60 is a small tiny sphere which can improve its mobility and reduce viscosity. This product has a melting point of 625 degrees Celsius and a true density 0.60 g/cm3. Hollow Glass Microspheres T60 improves flow properties and adjusts the density of paint. 收起 | |
| Isopropanol (IPA) | TOP Solvent Company Limited | Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropi...展开 Isopropanol (IPA) is a clear colorless water-white mobile liquid with a mild alcohol like odor. It is miscible in all proportions with water and numerous organic liquids and is solvent in many organic substances. Isopropanol is primarily to form azeotropic mixtures with water and many organic liquids. It is used in printing inks, adhesives, paints and coatings. 收起 | |
| Methanol | TOP Solvent Company Limited | Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is...展开 Methanol (MeOH) also known as Methyl Alcohol or wood spirit, is the most simple alcohol with a single carbon atom. Its many different applications include the manufacture of acetic, acid, acetic anhydride, formaldehyde, MMA. The primary use of methanol is in printing inks, paints and coatings as solvents, thinners, denaturant for ethanol and producing biodiesel. 收起 | |
| Methyl Ethyl Ketone (MEK) | TOP Solvent Company Limited | Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces sol...展开 Methyl ethyl ketone (MEK) is a colorless, low viscosity liquid with a slight odor similar to that of acetone. It is fully miscible with many organic liquids, but is limited to the miscibility with water. With natural and synthetic resins, MEK produces solutions with low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methyl Isobutyl Ketone (MIBK) | TOP Solvent Company Limited | Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic...展开 Methyl isobutyl ketone (MIBK) is a colorless, medium boiling liquid, with a distinguishing mild odor. It is miscible with the common solvents and diluent, but only slightly with water. MIBK is a solvent power for nitrocellulose, many natural and synthetic resins and can produce solutions of low viscosity and high solid content. The primary use for this product is a solvent for printing inks, adhesives, paints and coatings. 收起 | |
| Methylene Chloride | TOP Solvent Company Limited | Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with...展开 Methylene Chloride is a clear transparent organochloride compound widely used as a solvent. This product is a neutral liquid heavier than water and non-flammable. Methylene Chloride is fully miscible with almost all organic solvents but only slightly with water. It has solvent properties with most organic chemicals and materials. This product is primarily used as a solvent in paints and coatings. 收起 | |
| N-Butyl Acetate (BA) | TOP Solvent Company Limited | N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is prim...展开 N-Butyl acetate (BA) is a neutral colorless liquid with a unique odor. Butyl acetate has good solvent properties, and it has good volatility, high ability to be diluted makes it one of the most important medium-volatility solvents. N-Butyl acetate is primarily used as a solvent in printing inks, adhesives, paints and coatings. 收起 | |
| Polyamide Resin | Anhui Elite Industrial Co., Ltd | Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting prop...展开 Polyamide Resin is a kind of alcohol solvent polyamide resin, which has marvelous solvent liberation extremely good alcohol solubility, good compatibility with NC , superior freezing, water and gel resistance, good gloss, fluidity and pigment wetting property. It has applications in various gravure plastic printing ink, plastic flexibility issue printing, overprinting varnish and heat seal coating and heating seal beaded paint. 收起 | |
| Polyketone Resin | Anhui Elite Industrial Co., Ltd | Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resin...展开 Polyketone Resin is a non-toxic and light-cloured, hard resin with high photo-stability. This product is soluble in any solvent used in the coating industry with the exception of fatty alkane and water, and it may also be mixed and solved with many resins used in paint and inks. Polyketon Resin provides glossiness, adhesion, wettabillity, and hardness to paints, coatings, and inks. 收起 | |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a non-functionalized liquid polybutadiene. Due to its high content of 1,4-cis double bonds the apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 110 Bio is a highly reactive binder featuring a high chemical resistance, high wate...展开 POLYVEST® eCO 110 Bio is a non-functionalized liquid polybutadiene. Due to its high content of 1,4-cis double bonds the apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 110 Bio is a highly reactive binder featuring a high chemical resistance, high water resistance, high electrical insulation properties, and high cold resistance. It also has good solubility in aliphatic, aromatics and ethers, and good compatibility with hydrocarbon resins, rosin resins and zinc resonates. It can be used in a wide range of applications. 收起 | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...展开 POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. 收起 | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...展开 POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. 收起 | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...展开 POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio can be used in various applications. 收起 | Request Sample |
| POLYVEST® eCO MA 75 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessibl...展开 POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO MA 75 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO MA 75 Bio brings the same well-known performance but has reduced carbon emissions. 收起 | Request Sample |
| S-Butyl Acetate (SBA) | TOP Solvent Company Limited | S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing a...展开 S-Butyl acetate (SBA) is a transparent volatile liquid with a distinguishing ester odor. It is miscible in various solvents such as alcohols, ketones, glycol ethers, aromatic hydrocarbons and aliphatic hydrocarbons. It is primarily used in the producing and the processing of paints, coatings, printing inks, adhesives.. 收起 | |
| Silane Coupling Agent 150 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent 150 is a colorless to light yellow liquid which is soluble in most organic solvents. This product has a boiling point of 90.6 degrees Celsius and a density of 1.265 g/cm3. Silane Coupling Agent 150 acts as a surface treatment agent i...展开 Silane Coupling Agent 150 is a colorless to light yellow liquid which is soluble in most organic solvents. This product has a boiling point of 90.6 degrees Celsius and a density of 1.265 g/cm3. Silane Coupling Agent 150 acts as a surface treatment agent in glass fiber and reinforced plastics. 收起 | |
| Silane Coupling Agent ELT-S 341 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 341 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.8790 g/cm3 and a refractive index of 1.417 n25D. Silane Coupling Agent ELT-S 341 acts as a surface modifier which generate...展开 Silane Coupling Agent ELT-S 341 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.8790 g/cm3 and a refractive index of 1.417 n25D. Silane Coupling Agent ELT-S 341 acts as a surface modifier which generates hydrophobicity to concrete, glass, inorganic pigments, or mineral fillers. 收起 | |
| Silane Coupling Agent ELT-S 550 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of ad...展开 Silane Coupling Agent ELT-S 550 is a colorless, transparent liquid which is immediately soluble in water. This product has a molecular weight of 221.37 and a boiling point of 217 degrees Celsius. Silane Coupling Agent ELT-S 550 improves the adhesion of adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 551 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in ad...展开 Silane Coupling Agent ELT-S 551 is a colorless, transparent liquid which has a molecular weight of 179.29. This product has a boiling point of 88 degrees Celsius/ 15mmHg and a density of 1.016 g/cm3. Silane Coupling Agent ELT-S 551 improves adhesion in adhesives and coatings. 收起 | |
| Silane Coupling Agent ELT-S 602 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an a...展开 Silane Coupling Agent ELT-S 602 is a colorless, transparent liquid which has a molecular weight of 206.36. This product has a boiling point of 265 degrees Celsius and a density of between 0.965 and 0.975 g/cm3. Silane Coupling Agent ELT-S 602 acts as an adhesion promoter in adhesives and sealants. 收起 | |
| Silane Coupling Agent ELT-S 672 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 672 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.9070 g/cm3 and a refractive index of 1.4160 n25D. Silane Coupling Agent ELT-S 672 acts as a surface modifier which provide...展开 Silane Coupling Agent ELT-S 672 is a colorless, transparent liquid which has a purity of 98 percent. This product has a density of 0.9070 g/cm3 and a refractive index of 1.4160 n25D. Silane Coupling Agent ELT-S 672 acts as a surface modifier which provides hydrophobicity to concrete, glass, inorganic pigments, or mineral fillers. 收起 | |
| Silane Coupling Agent ELT-S 792 | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 ...展开 Silane Coupling Agent ELT-S 792 is a colorless to yellowish, transparent liquid which has a viscosity of 4.5 mm2/s. This product has a boiling point of between 114 and 118 degrees Celsius/2mmHg and a density of 1.04 g/cm3. Silane Coupling Agent ELT-S 792 acts as an adhesion promoter in PVC-based sealants. 收起 | |
| Silane Coupling Agent ELT-TEOS | Anhui Elite Industrial Co., Ltd | Silane Coupling Agent ELT-TEOS is a neutral, colorless, transparent liquid which can be hydrolyzed in water. This product ha a molecular weight of 208.33 and a density of between 0.93 and 0.95 g/cm3. Silane Coupling Agent ELT-TEOS is used as an adhesive i...展开 Silane Coupling Agent ELT-TEOS is a neutral, colorless, transparent liquid which can be hydrolyzed in water. This product ha a molecular weight of 208.33 and a density of between 0.93 and 0.95 g/cm3. Silane Coupling Agent ELT-TEOS is used as an adhesive in paints and coatings. 收起 | |
| Solid Acrylic Resin ELT-66 | Anhui Elite Industrial Co., Ltd | Solid Acrylic Resin ELT-66 is a white granular which is soluble in ester, ketone, aromatics, gasoline, and alcohol. This product has a viscosity between 2300 and 4300 and is also compatible with CAB. Solid Acrylic Resin ELT-66 provides gloss, hardness, we...展开 Solid Acrylic Resin ELT-66 is a white granular which is soluble in ester, ketone, aromatics, gasoline, and alcohol. This product has a viscosity between 2300 and 4300 and is also compatible with CAB. Solid Acrylic Resin ELT-66 provides gloss, hardness, weather and chemical resistance, leveling, and pigment dispersion to paint and inks. 收起 | |
| Solid Acrylic Resin ELT-725 | Anhui Elite Industrial Co., Ltd | Solid Acrylic Resin ELT-725 is a white granular which is ester, ketone, and aromatic soluble. This product has a viscosity between 300 and 400 and is compatible with CAB, NC, and other resins. This product provides adhesion, hardness, yellowing, and weath...展开 Solid Acrylic Resin ELT-725 is a white granular which is ester, ketone, and aromatic soluble. This product has a viscosity between 300 and 400 and is compatible with CAB, NC, and other resins. This product provides adhesion, hardness, yellowing, and weather resistance to paint and inks. Solid Acrylic Resin ELT-725 is compatible with CAB, NC, and other resins. 收起 | |
| Tetra-Isopropyl Titanate | Anhui Taichang Chemical Co., Ltd. | Tetra-Isopropyl Titanate is an intermediate derived from titanium. This product appears as a light yellow, transparent liquid. It can be used as a catalyst additive in coating primers or added to that formulation as an adhesion promoter. | |
| Tetrabutyl Titanate | Anhui Taichang Chemical Co., Ltd. | Tetrabutyl Titanate is a chemical intermediate. This product appears as a pale yellow, oily liquid that can be used as a heat resistant additive in coatings and adhesives. It can be used as a crosslinking agent and condensation reaction catalyst. | |
| Thermoplastic Solid Acrylic Resin AR-01 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-01 is a white granular which is soluble in ester, ketone, aromatics, and alcohol ethers. This product has a viscosity between 250-450 and is also compatible with chlorinated rubber and provides resistance to chemicals,...展开 Thermoplastic Solid Acrylic Resin AR-01 is a white granular which is soluble in ester, ketone, aromatics, and alcohol ethers. This product has a viscosity between 250-450 and is also compatible with chlorinated rubber and provides resistance to chemicals, water, and abrasions. Thermoplastic Solid Acrylic Resin AR-01 provides adhesion, flexibility, dispersivity, and leveling to exterior coatings and fire retardant coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-01B | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-01B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-01B ...展开 Thermoplastic Solid Acrylic Resin AR-01B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-01B provides adhesion, flexibility, dispersivity, leveling, and compatibility to industrial coating, floor coating and machinery enamel. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-02 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 pro...展开 Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 provides adhesion, flexibility, dispersivity, leveling, and compatibility to road marking and floor coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-04 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-04 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-04 pro...展开 Thermoplastic Solid Acrylic Resin AR-04 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-04 provides adhesion, flexibility, dispersivity, leveling, and compatibility to anti-corrosive and fire retardant coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-05 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-05 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 300-500 and also provides chemical, water, and alcohol resistance. AR-05 pro...展开 Thermoplastic Solid Acrylic Resin AR-05 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 300-500 and also provides chemical, water, and alcohol resistance. AR-05 provides adhesion, flexibility, dispersivity, leveling, and compatibility to anti-corrosive and industrial coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-06 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-06 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-80 and also provides chemical, water, and alcohol resistance. AR-06 prov...展开 Thermoplastic Solid Acrylic Resin AR-06 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-80 and also provides chemical, water, and alcohol resistance. AR-06 provides adhesion, flexibility, dispersivity, leveling, and compatibility to container and industrial coatings and machinery enamel. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-10 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-10 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 200-400 and also provides chemical, water, and alcohol resistance. AR-10 pro...展开 Thermoplastic Solid Acrylic Resin AR-10 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 200-400 and also provides chemical, water, and alcohol resistance. AR-10 provides adhesion, flexibility, dispersivity, leveling, and compatibility to exterior coatings and ink. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-13 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-13 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13 p...展开 Thermoplastic Solid Acrylic Resin AR-13 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13 provides adhesion, flexibility, dispersivity, leveling, and compatibility to high gloss industrial and plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-13B | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-13B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13B...展开 Thermoplastic Solid Acrylic Resin AR-13B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-13B provides adhesion, flexibility, dispersivity, leveling, and compatibility to aluminum and plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-17 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-17 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-17 p...展开 Thermoplastic Solid Acrylic Resin AR-17 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-17 provides adhesion, flexibility, dispersivity, leveling, and compatibility to leather varnish and ABS plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-24 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-24 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-24 pro...展开 Thermoplastic Solid Acrylic Resin AR-24 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-24 provides adhesion, flexibility, dispersivity, leveling, and compatibility to ceramic and heat sealing varnish. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-24B | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-24B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-500 and also provides chemical, water, and alcohol resistance. AR-24B p...展开 Thermoplastic Solid Acrylic Resin AR-24B is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-500 and also provides chemical, water, and alcohol resistance. AR-24B provides adhesion, flexibility, dispersivity, leveling, and compatibility to ceramic and heat sealing lacquers. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-396 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-396 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-200 and also provides chemical, water, and alcohol resistance. AR-396 p...展开 Thermoplastic Solid Acrylic Resin AR-396 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 100-200 and also provides chemical, water, and alcohol resistance. AR-396 provides adhesion, flexibility, dispersivity, leveling, and compatibility to environment friendly coatings and ink. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-40 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-40 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-700 and also provides chemical, water, and alcohol resistance. AR-40 pro...展开 Thermoplastic Solid Acrylic Resin AR-40 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-700 and also provides chemical, water, and alcohol resistance. AR-40 provides adhesion, flexibility, dispersivity, leveling, and compatibility to appliance and glass paint. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-44 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-44 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-44 pr...展开 Thermoplastic Solid Acrylic Resin AR-44 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-44 provides adhesion, flexibility, dispersivity, leveling, and compatibility to fluorocarbon paint, screen printing ink, industrial coating and metal varnishes. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-53 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-53 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-53 pro...展开 Thermoplastic Solid Acrylic Resin AR-53 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 350-550 and also provides chemical, water, and alcohol resistance. AR-53 provides adhesion, flexibility, dispersivity, leveling, and compatibility to ink and plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-58 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-58 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2400-2800 and also provides chemical, water, and alcohol resistance. AR-58 p...展开 Thermoplastic Solid Acrylic Resin AR-58 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2400-2800 and also provides chemical, water, and alcohol resistance. AR-58 provides adhesion, flexibility, dispersivity, leveling, and compatibility to floor and industrial coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-66 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-66 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-66 p...展开 Thermoplastic Solid Acrylic Resin AR-66 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 2000-4000 and also provides chemical, water, and alcohol resistance. AR-66 provides adhesion, flexibility, dispersivity, leveling, and compatibility to plastic and container coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-725 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-725 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-725 p...展开 Thermoplastic Solid Acrylic Resin AR-725 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-725 provides adhesion, flexibility, dispersivity, leveling, and compatibility to plastic coatings and PVC ink. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-728 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-728 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-600 and also provides chemical, water, and alcohol resistance. AR-728 p...展开 Thermoplastic Solid Acrylic Resin AR-728 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 400-600 and also provides chemical, water, and alcohol resistance. AR-728 provides adhesion, flexibility, dispersivity, leveling, and compatibility to hard plastic coatings. 收起 | |
| Thermoplastic Solid Acrylic Resin AR-9820 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-9820 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-982...展开 Thermoplastic Solid Acrylic Resin AR-9820 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 850-1300 and also provides chemical, water, and alcohol resistance. AR-9820 provides adhesion, flexibility, dispersivity, leveling, and compatibility to aluminum paint and plastic coatings. 收起 | |
| Titanate Coupling Agent G-2 | Anhui Taichang Chemical Co., Ltd. | Titanate Coupling Agent G-2 is a monoalkoxy-coupling agent. This product appears as a white to light yellow, waxy solid and has a melting point of 55-60. It can be used for surface modification of pigment and filler, and it can improve the dispersion and ...展开 Titanate Coupling Agent G-2 is a monoalkoxy-coupling agent. This product appears as a white to light yellow, waxy solid and has a melting point of 55-60. It can be used for surface modification of pigment and filler, and it can improve the dispersion and sedimentation resistance in paint. 收起 | |
| Titanate Coupling Agent TC-114 | Anhui Taichang Chemical Co., Ltd. | Titanate Coupling Agent TC-114 is a mono-alkoxy pyrophosphate coupling agent. This product appears as a nearly colorless to light yellow viscous liquid, and it can be used to improve the water resistance in paints and coatings. | |
| Titanate Coupling Agent TC-2 | Anhui Taichang Chemical Co., Ltd. | Titanate Coupling Agent TC-2 is a monoalkoxy-phosphate coupling agent. This product appears as a colorless to light yellow, viscous liquid that can be used to improve the dispersion and sedimentation resistance of paints and coatings. | |
| Titanate Coupling Agent TC-27 | Anhui Taichang Chemical Co., Ltd. | Titanate Coupling Agent TC-27 is a multiplex monoalkoxy titanate coupling agent that appears as a deep brown dope. This product can be used in organic and inorganic pigments, and oil ink. It can also be used in paints to improve the dispersion and heat re...展开 Titanate Coupling Agent TC-27 is a multiplex monoalkoxy titanate coupling agent that appears as a deep brown dope. This product can be used in organic and inorganic pigments, and oil ink. It can also be used in paints to improve the dispersion and heat resistance, and prevent paints from sedimenting. 收起 |
